Merge tag 'v5.4.24' into imx_5.4.y

Merge Linux stable release v5.4.24 into imx_5.4.y

* tag 'v5.4.24': (3306 commits)
  Linux 5.4.24
  blktrace: Protect q->blk_trace with RCU
  kvm: nVMX: VMWRITE checks unsupported field before read-only field
  ...

Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>

 Conflicts:
	arch/arm/boot/dts/imx6sll-evk.dts
	arch/arm/boot/dts/imx7ulp.dtsi
	arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
	drivers/clk/imx/clk-composite-8m.c
	drivers/gpio/gpio-mxc.c
	drivers/irqchip/Kconfig
	drivers/mmc/host/sdhci-of-esdhc.c
	drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
	drivers/net/can/flexcan.c
	drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
	drivers/net/ethernet/mscc/ocelot.c
	drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
	drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
	drivers/net/phy/realtek.c
	drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
	drivers/perf/fsl_imx8_ddr_perf.c
	drivers/tee/optee/shm_pool.c
	drivers/usb/cdns3/gadget.c
	kernel/sched/cpufreq.c
	net/core/xdp.c
	sound/soc/fsl/fsl_esai.c
	sound/soc/fsl/fsl_sai.c
	sound/soc/sof/core.c
	sound/soc/sof/imx/Kconfig
	sound/soc/sof/loader.c

19 files changed, 94 insertions, 50 deletions

diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
index 8ca498447aeb..05601a90a9b6 100644
--- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -29,13 +29,13 @@ Description:	This file shows the system fans direction:
 
 		The files are read only.
 
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
 
 Date:		November 2018
 KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD versions have been burned
-		on LED board.
+		on LED or Gearbox board.
 
 		The files are read only.
 
@@ -121,6 +121,15 @@ Description:	These files show the system reset cause, as following: ComEx
 
 		The files are read only.
 
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
+Date:		November 2018
+KernelVersion:	5.0
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show with which CPLD versions have been burned
+		on LED board.
+
+		The files are read only.
+
 Date:		June 2019
 KernelVersion:	5.3
 Contact:	Vadim Pasternak <vadimpmellanox.com>
diff --git a/Documentation/ABI/testing/sysfs-bus-mei b/Documentation/ABI/testing/sysfs-bus-mei
index 6bd45346ac7e..3f8701e8fa24 100644
--- a/Documentation/ABI/testing/sysfs-bus-mei
+++ b/Documentation/ABI/testing/sysfs-bus-mei
@@ -4,7 +4,7 @@ KernelVersion:	3.10
 Contact:	Samuel Ortiz <sameo@linux.intel.com>
 		linux-mei@linux.intel.com
 Description:	Stores the same MODALIAS value emitted by uevent
-		Format: mei:<mei device name>:<device uuid>:
+		Format: mei:<mei device name>:<device uuid>:<protocol version>
 
 What:		/sys/bus/mei/devices/.../name
 Date:		May 2015
diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq
index 01196e19afca..75897e2fde43 100644
--- a/Documentation/ABI/testing/sysfs-class-devfreq
+++ b/Documentation/ABI/testing/sysfs-class-devfreq
@@ -7,6 +7,13 @@ Description:
 		The name of devfreq object denoted as ... is same as the
 		name of device using devfreq.
 
+What:		/sys/class/devfreq/.../name
+Date:		November 2019
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq/.../name shows the name of device
+		of the corresponding devfreq object.
+
 What:		/sys/class/devfreq/.../governor
 Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
diff --git a/Documentation/admin-guide/device-mapper/index.rst b/Documentation/admin-guide/device-mapper/index.rst
index c77c58b8f67b..d8dec8911eb3 100644
--- a/Documentation/admin-guide/device-mapper/index.rst
+++ b/Documentation/admin-guide/device-mapper/index.rst
@@ -8,6 +8,7 @@ Device Mapper
     cache-policies
     cache
     delay
+    dm-clone
     dm-crypt
     dm-flakey
     dm-init
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 9983ac73b66d..5594c8bf1dcd 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -113,7 +113,7 @@
 			the GPE dispatcher.
 			This facility can be used to prevent such uncontrolled
 			GPE floodings.
-			Format: <int>
+			Format: <byte>
 
 	acpi_no_auto_serialize	[HW,ACPI]
 			Disable auto-serialization of AML methods
@@ -5101,13 +5101,13 @@
 			Flags is a set of characters, each corresponding
 			to a common usb-storage quirk flag as follows:
 				a = SANE_SENSE (collect more than 18 bytes
-					of sense data);
+					of sense data, not on uas);
 				b = BAD_SENSE (don't collect more than 18
-					bytes of sense data);
+					bytes of sense data, not on uas);
 				c = FIX_CAPACITY (decrease the reported
 					device capacity by one sector);
 				d = NO_READ_DISC_INFO (don't use
-					READ_DISC_INFO command);
+					READ_DISC_INFO command, not on uas);
 				e = NO_READ_CAPACITY_16 (don't use
 					READ_CAPACITY_16 command);
 				f = NO_REPORT_OPCODES (don't use report opcodes
@@ -5122,17 +5122,18 @@
 				j = NO_REPORT_LUNS (don't use report luns
 					command, uas only);
 				l = NOT_LOCKABLE (don't try to lock and
-					unlock ejectable media);
+					unlock ejectable media, not on uas);
 				m = MAX_SECTORS_64 (don't transfer more
-					than 64 sectors = 32 KB at a time);
+					than 64 sectors = 32 KB at a time,
+					not on uas);
 				n = INITIAL_READ10 (force a retry of the
-					initial READ(10) command);
+					initial READ(10) command, not on uas);
 				o = CAPACITY_OK (accept the capacity
-					reported by the device);
+					reported by the device, not on uas);
 				p = WRITE_CACHE (the device cache is ON
-					by default);
+					by default, not on uas);
 				r = IGNORE_RESIDUE (the device reports
-					bogus residue values);
+					bogus residue values, not on uas);
 				s = SINGLE_LUN (the device has only one
 					Logical Unit);
 				t = NO_ATA_1X (don't allow ATA(12) and ATA(16)
@@ -5141,7 +5142,8 @@
 				w = NO_WP_DETECT (don't test whether the
 					medium is write-protected).
 				y = ALWAYS_SYNC (issue a SYNCHRONIZE_CACHE
-					even if the device claims no cache)
+					even if the device claims no cache,
+					not on uas)
 			Example: quirks=0419:aaf5:rl,0421:0433:rc
 
 	user_debug=	[KNL,ARM]
diff --git a/Documentation/arm64/tagged-address-abi.rst b/Documentation/arm64/tagged-address-abi.rst
index d4a85d535bf9..4a9d9c794ee5 100644
--- a/Documentation/arm64/tagged-address-abi.rst
+++ b/Documentation/arm64/tagged-address-abi.rst
@@ -44,8 +44,15 @@ The AArch64 Tagged Address ABI has two stages of relaxation depending
 how the user addresses are used by the kernel:
 
 1. User addresses not accessed by the kernel but used for address space
-   management (e.g. ``mmap()``, ``mprotect()``, ``madvise()``). The use
-   of valid tagged pointers in this context is always allowed.
+   management (e.g. ``mprotect()``, ``madvise()``). The use of valid
+   tagged pointers in this context is allowed with the exception of
+   ``brk()``, ``mmap()`` and the ``new_address`` argument to
+   ``mremap()`` as these have the potential to alias with existing
+   user addresses.
+
+   NOTE: This behaviour changed in v5.6 and so some earlier kernels may
+   incorrectly accept valid tagged pointers for the ``brk()``,
+   ``mmap()`` and ``mremap()`` system calls.
 
 2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
    relaxation is disabled by default and the application thread needs to
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index 5138a2f6232a..646cb3525373 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -12,7 +12,6 @@ $(obj)/%.example.dts: $(src)/%.yaml FORCE
 	$(call if_changed,chk_binding)
 
 DT_TMP_SCHEMA := processed-schema.yaml
-extra-y += $(DT_TMP_SCHEMA)
 
 quiet_cmd_mk_schema = SCHEMA  $@
       cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs)
@@ -26,8 +25,12 @@ DT_DOCS = $(shell \
 
 DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS))
 
+ifeq ($(CHECK_DTBS),)
 extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
 extra-y += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
+endif
 
 $(obj)/$(DT_TMP_SCHEMA): $(DT_SCHEMA_FILES) FORCE
 	$(call if_changed,mk_schema)
+
+extra-y += $(DT_TMP_SCHEMA)
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
index e96e085271c1..83f6c6a7c41c 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
@@ -46,7 +46,7 @@ Required properties:
 Example (R-Car H3):
 
 	usb2_clksel: clock-controller@e6590630 {
-		compatible = "renesas,r8a77950-rcar-usb2-clock-sel",
+		compatible = "renesas,r8a7795-rcar-usb2-clock-sel",
 			     "renesas,rcar-gen3-usb2-clock-sel";
 		reg = <0 0xe6590630 0 0x02>;
 		clocks = <&cpg CPG_MOD 703>, <&usb_extal>, <&usb_xtal>;
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index cc544fdc38be..bc8aed17800d 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -85,7 +85,7 @@ properties:
       Must be the device tree identifier of the over-sampling
       mode pins. As the line is active high, it should be marked
       GPIO_ACTIVE_HIGH.
-    maxItems: 1
+    maxItems: 3
 
   adi,sw-mode:
     description:
@@ -128,9 +128,9 @@ examples:
                 adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
                 reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
                 adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-                adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH
-                                                &gpio 23 GPIO_ACTIVE_HIGH
-                                                &gpio 26 GPIO_ACTIVE_HIGH>;
+                adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
+                                               <&gpio 23 GPIO_ACTIVE_HIGH>,
+                                               <&gpio 26 GPIO_ACTIVE_HIGH>;
                 standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
                 adi,sw-mode;
         };
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 4845e29411e4..e08cd4c4d568 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -347,6 +347,7 @@ allOf:
               - st,spear600-gmac
 
     then:
+      properties:
         snps,tso:
           $ref: /schemas/types.yaml#definitions/flag
           description:
diff --git a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
index 6e5341b4f891..ee59409640f2 100644
--- a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
+++ b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
@@ -22,6 +22,6 @@ Example:
 	};
 
 	&ethernet_switch {
-		resets = <&reset>;
+		resets = <&reset 26>;
 		reset-names = "switch";
 	};
diff --git a/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt b/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt
new file mode 100644
index 000000000000..f315c9723bd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt
@@ -0,0 +1,27 @@
+OMAP ROM RNG driver binding
+
+Secure SoCs may provide RNG via secure ROM calls like Nokia N900 does. The
+implementation can depend on the SoC secure ROM used.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "nokia,n900-rom-rng"
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to the the RNG interface clock
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "ick"
+
+Example:
+
+	rom_rng: rng {
+		compatible = "nokia,n900-rom-rng";
+		clocks = <&rng_ick>;
+		clock-names = "ick";
+	};
diff --git a/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
index d6d5207fa996..17ff3892f439 100644
--- a/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
+++ b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
@@ -2,9 +2,11 @@ MT8183 with MT6358, TS3A227 and MAX98357 CODECS
 
 Required properties:
 - compatible : "mediatek,mt8183_mt6358_ts3a227_max98357"
-- mediatek,headset-codec: the phandles of ts3a227 codecs
 - mediatek,platform: the phandle of MT8183 ASoC platform
 
+Optional properties:
+- mediatek,headset-codec: the phandles of ts3a227 codecs
+
 Example:
 
 	sound {
diff --git a/Documentation/devicetree/writing-schema.rst b/Documentation/devicetree/writing-schema.rst
index f4a638072262..83e04e5c342d 100644
--- a/Documentation/devicetree/writing-schema.rst
+++ b/Documentation/devicetree/writing-schema.rst
@@ -130,11 +130,13 @@ binding schema. All of the DT binding documents can be validated using the
 
     make dt_binding_check
 
-In order to perform validation of DT source files, use the `dtbs_check` target::
+In order to perform validation of DT source files, use the ``dtbs_check`` target::
 
     make dtbs_check
 
-This will first run the `dt_binding_check` which generates the processed schema.
+Note that ``dtbs_check`` will skip any binding schema files with errors. It is
+necessary to use ``dt_binding_check`` to get all the validation errors in the
+binding schema files.
 
 It is also possible to run checks with a single schema file by setting the
 ``DT_SCHEMA_FILES`` variable to a specific schema file.
diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst
index ebca41785abe..65ba40255137 100644
--- a/Documentation/fb/fbcon.rst
+++ b/Documentation/fb/fbcon.rst
@@ -127,7 +127,7 @@ C. Boot options
 	is typically located on the same video card.  Thus, the consoles that
 	are controlled by the VGA console will be garbled.
 
-4. fbcon=rotate:<n>
+5. fbcon=rotate:<n>
 
 	This option changes the orientation angle of the console display. The
 	value 'n' accepts the following:
@@ -152,21 +152,21 @@ C. Boot options
 	Actually, the underlying fb driver is totally ignorant of console
 	rotation.
 
-5. fbcon=margin:<color>
+6. fbcon=margin:<color>
 
 	This option specifies the color of the margins. The margins are the
 	leftover area at the right and the bottom of the screen that are not
 	used by text. By default, this area will be black. The 'color' value
 	is an integer number that depends on the framebuffer driver being used.
 
-6. fbcon=nodefer
+7. fbcon=nodefer
 
 	If the kernel is compiled with deferred fbcon takeover support, normally
 	the framebuffer contents, left in place by the firmware/bootloader, will
 	be preserved until there actually is some text is output to the console.
 	This option causes fbcon to bind immediately to the fbdev device.
 
-7. fbcon=logo-pos:<location>
+8. fbcon=logo-pos:<location>
 
 	The only possible 'location' is 'center' (without quotes), and when
 	given, the bootup logo is moved from the default top-left corner
diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst
index b89c88168d6a..b9b50553bfc5 100644
--- a/Documentation/kbuild/makefiles.rst
+++ b/Documentation/kbuild/makefiles.rst
@@ -1115,23 +1115,6 @@ When kbuild executes, the following steps are followed (roughly):
 	In this example, extra-y is used to list object files that
 	shall be built, but shall not be linked as part of built-in.a.
 
-    header-test-y
-
-	header-test-y specifies headers (`*.h`) in the current directory that
-	should be compile tested to ensure they are self-contained,
-	i.e. compilable as standalone units. If CONFIG_HEADER_TEST is enabled,
-	this builds them as part of extra-y.
-
-    header-test-pattern-y
-
-	This works as a weaker version of header-test-y, and accepts wildcard
-	patterns. The typical usage is::
-
-		header-test-pattern-y += *.h
-
-	This specifies all the files that matches to `*.h` in the current
-	directory, but the files in 'header-test-' are excluded.
-
 6.7 Commands useful for building a boot image
 ---------------------------------------------
 
diff --git a/Documentation/networking/j1939.rst b/Documentation/networking/j1939.rst
index dc60b13fcd09..f5be243d250a 100644
--- a/Documentation/networking/j1939.rst
+++ b/Documentation/networking/j1939.rst
@@ -339,7 +339,7 @@ To claim an address following code example can be used:
 			.pgn = J1939_PGN_ADDRESS_CLAIMED,
 			.pgn_mask = J1939_PGN_PDU1_MAX,
 		}, {
-			.pgn = J1939_PGN_ADDRESS_REQUEST,
+			.pgn = J1939_PGN_REQUEST,
 			.pgn_mask = J1939_PGN_PDU1_MAX,
 		}, {
 			.pgn = J1939_PGN_ADDRESS_COMMANDED,
diff --git a/Documentation/networking/nf_flowtable.txt b/Documentation/networking/nf_flowtable.txt
index ca2136c76042..0bf32d1121be 100644
--- a/Documentation/networking/nf_flowtable.txt
+++ b/Documentation/networking/nf_flowtable.txt
@@ -76,7 +76,7 @@ flowtable and add one rule to your forward chain.
 
         table inet x {
 		flowtable f {
-			hook ingress priority 0 devices = { eth0, eth1 };
+			hook ingress priority 0; devices = { eth0, eth1 };
 		}
                 chain y {
                         type filter hook forward priority 0; policy accept;
diff --git a/Documentation/scsi/smartpqi.txt b/Documentation/scsi/smartpqi.txt
index 201f80c7c050..df129f55ace5 100644
--- a/Documentation/scsi/smartpqi.txt
+++ b/Documentation/scsi/smartpqi.txt
@@ -29,7 +29,7 @@ smartpqi specific entries in /sys
   smartpqi host attributes:
   -------------------------
   /sys/class/scsi_host/host*/rescan
-  /sys/class/scsi_host/host*/version
+  /sys/class/scsi_host/host*/driver_version
 
   The host rescan attribute is a write only attribute. Writing to this
   attribute will trigger the driver to scan for new, changed, or removed