Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Minor conflict in r8169, bug fix had two versions in net
and net-next, take the net-next hunks.

Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 28 insertions, 11 deletions

diff --git a/Documentation/PCI/index.rst b/Documentation/PCI/index.rst
index f4c6121868c3..6768305e4c26 100644
--- a/Documentation/PCI/index.rst
+++ b/Documentation/PCI/index.rst
@@ -9,7 +9,7 @@ Linux PCI Bus Subsystem
    :numbered:
 
    pci
-   picebus-howto
+   pciebus-howto
    pci-iov-howto
    msi-howto
    acpi-info
diff --git a/Documentation/PCI/picebus-howto.rst b/Documentation/PCI/pciebus-howto.rst
index f882ff62c51f..f882ff62c51f 100644
--- a/Documentation/PCI/picebus-howto.rst
+++ b/Documentation/PCI/pciebus-howto.rst
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 47d981a86e2f..4c1971960afa 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4090,6 +4090,13 @@
 			Run specified binary instead of /init from the ramdisk,
 			used for early userspace startup. See initrd.
 
+	rdrand=		[X86]
+			force - Override the decision by the kernel to hide the
+				advertisement of RDRAND support (this affects
+				certain AMD processors because of buggy BIOS
+				support, specifically around the suspend/resume
+				path).
+
 	rdt=		[HW,X86,RDT]
 			Turn on/off individual RDT features. List is:
 			cmt, mbmtotal, mbmlocal, l3cat, l3cdp, l2cat, l2cdp,
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
index 09fc02b99845..a5c1db95b3ec 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
@@ -1,20 +1,30 @@
 * ARC-HS Interrupt Distribution Unit
 
-  This optional 2nd level interrupt controller can be used in SMP configurations for
-  dynamic IRQ routing, load balancing of common/external IRQs towards core intc.
+  This optional 2nd level interrupt controller can be used in SMP configurations
+  for dynamic IRQ routing, load balancing of common/external IRQs towards core
+  intc.
 
 Properties:
 
 - compatible: "snps,archs-idu-intc"
 - interrupt-controller: This is an interrupt controller.
-- #interrupt-cells: Must be <1>.
-
-  Value of the cell specifies the "common" IRQ from peripheral to IDU. Number N
-  of the particular interrupt line of IDU corresponds to the line N+24 of the
-  core interrupt controller.
-
-  intc accessed via the special ARC AUX register interface, hence "reg" property
-  is not specified.
+- #interrupt-cells: Must be <1> or <2>.
+
+  Value of the first cell specifies the "common" IRQ from peripheral to IDU.
+  Number N of the particular interrupt line of IDU corresponds to the line N+24
+  of the core interrupt controller.
+
+  The (optional) second cell specifies any of the following flags:
+    - bits[3:0] trigger type and level flags
+        1 = low-to-high edge triggered
+        2 = NOT SUPPORTED (high-to-low edge triggered)
+        4 = active high level-sensitive <<< DEFAULT
+        8 = NOT SUPPORTED (active low level-sensitive)
+  When no second cell is specified, the interrupt is assumed to be level
+  sensitive.
+
+  The interrupt controller is accessed via the special ARC AUX register
+  interface, hence "reg" property is not specified.
 
 Example:
 	core_intc: core-interrupt-controller {