summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-08-15 21:35:38 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-08-15 21:35:38 -0700
commit6de4c691eab8f421e34c5250f63bf3f477d30eec (patch)
treedd3deaa163bb478b13778a712afdfccc8cf43f20 /Documentation
parentc1c2ad82c772966d3cdb9a4852329fa2cf71853a (diff)
parenta5ec96ddfd55c501d451cb310566a1170c267ecb (diff)
Merge tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.19 kernel cycle. I don't know if anything in particular stands out. Maybe the Aspeed coprocessor thing from Benji: Aspeed is doing baseboard management chips (BMC's) for servers etc. These Aspeed's are ARM processors that exist inside (I guess) Intel servers, and they are moving forward to using mainline Linux in those. This is one of the pieces of the puzzle to achive that. They are doing OpenBMC, it's pretty cool: https://lwn.net/Articles/683320/ Summary: Core changes: - Add a new API for explicitly naming GPIO consumers, when needed. - Don't let userspace set values on input lines. While we do not think anyone would do this crazy thing we better plug the hole before someone uses it and think it's a nifty feature. - Avoid calling chip->request() for unused GPIOs. New drivers/subdrivers: - The Mediatek MT7621 is supported which is a big win for OpenWRT and similar router distributions using this chip, as it seems every major router manufacturer on the planet has made products using this chip: https://wikidevi.com/wiki/MediaTek_MT7621 - The Tegra 194 is now supported. - The IT87 driver now supports IT8786E and IT8718F super-IO chips. - Add support for Rockchip RK3328 in the syscon GPIO driver. Driver changes: - Handle the get/set_multiple() properly on MMIO chips with inverted direction registers. We didn't have this problem until a new chip appear that has get/set registers AND inverted direction bits, OK now we handle it. - A patch series making more error codes percolate upward properly for different errors on gpiochip_lock_as_irq(). - Get/set multiple for the OMAP driver, accelerating these multiple line operations if possible. - A coprocessor interface for the Aspeed driver. Sometimes a few GPIO lines need to be grabbed by a co-processor for doing automated tasks, sometimes they are available as GPIO lines. By adding an explicit API in this driver we make it possible for the two line consumers to coexist. (This work was made available on the ib-aspeed branch, which may be appearing in other pull requests.) - Implemented .get_direction() and open drain in the SCH311x driver. - Continuing cleanup of included headers in GPIO drivers" * tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits) gpio: it87: Add support for IT8613 gpio: it87: add support for IT8718F Super I/O. gpiolib: Avoid calling chip->request() for unused gpios gpio: tegra: Include the right header gpio: mmio: Fix up inverted direction registers gpio: xilinx: Use the right include gpio: timberdale: Include the right header gpio: tb10x: Use the right include gpiolib: Fix of_node inconsistency gpio: vr41xx: Bail out on gpiochip_lock_as_irq() error gpio: uniphier: Bail out on gpiochip_lock_as_irq() error gpio: xgene-sb: Don't shadow error code of gpiochip_lock_as_irq() gpio: em: Don't shadow error code of gpiochip_lock_as_irq() gpio: dwapb: Don't shadow error code of gpiochip_lock_as_irq() gpio: bcm-kona: Don't shadow error code of gpiochip_lock_as_irq() gpiolib: Don't shadow error code of gpiochip_lock_as_irq() gpio: syscon: rockchip: add GRF GPIO support for rk3328 gpio: omap: Add get/set_multiple() callbacks gpio: pxa: remove set but not used variable 'gpio_offset' gpio-it87: add support for IT8786E Super I/O ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt3
-rw-r--r--Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt35
-rw-r--r--Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt4
-rw-r--r--Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt1
-rw-r--r--Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt32
5 files changed, 75 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
index dbd22e0df21e..b4cd9f906c24 100644
--- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
@@ -19,6 +19,9 @@ Required properties:
4 = active high level-sensitive.
8 = active low level-sensitive.
+Optional properties:
+- clocks: the clock for clocking the GPIO silicon
+
Example:
gpio0: gpio@73f84000 {
diff --git a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
new file mode 100644
index 000000000000..ba455589f869
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
@@ -0,0 +1,35 @@
+Mediatek MT7621 SoC GPIO controller bindings
+
+The IP core used inside these SoCs has 3 banks of 32 GPIOs each.
+The registers of all the banks are interwoven inside one single IO range.
+We load one GPIO controller instance per bank. Also the GPIO controller can receive
+interrupts on any of the GPIOs, either edge or level. It then interrupts the CPU
+using GIC INT12.
+
+Required properties for the top level node:
+- #gpio-cells : Should be two. The first cell is the GPIO pin number and the
+ second cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+ Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt. Should be 2. The first cell defines the interrupt number,
+ the second encodes the triger flags encoded as described in
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+- compatible:
+ - "mediatek,mt7621-gpio" for Mediatek controllers
+- reg : Physical base address and length of the controller's registers
+- interrupt-parent : phandle of the parent interrupt controller.
+- interrupts : Interrupt specifier for the controllers interrupt.
+- interrupt-controller : Mark the device node as an interrupt controller.
+- gpio-controller : Marks the device node as a GPIO controller.
+
+Example:
+ gpio@600 {
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "mediatek,mt7621-gpio";
+ gpio-controller;
+ interrupt-controller;
+ reg = <0x600 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt
index c82a2e221bc1..adff16c71d21 100644
--- a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt
@@ -68,6 +68,8 @@ Required properties:
One of:
- "nvidia,tegra186-gpio".
- "nvidia,tegra186-gpio-aon".
+ - "nvidia,tegra194-gpio".
+ - "nvidia,tegra194-gpio-aon".
- reg-names
Array of strings.
Contains a list of names for the register spaces described by the reg
@@ -91,6 +93,8 @@ Required properties:
depending on compatible value:
- "nvidia,tegra186-gpio": 6 entries.
- "nvidia,tegra186-gpio-aon": 1 entry.
+ - "nvidia,tegra194-gpio": 6 entries.
+ - "nvidia,tegra194-gpio-aon": 1 entry.
- gpio-controller
Boolean.
Marks the device node as a GPIO controller/provider.
diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
index fe1bf24104d3..4018ee57a6af 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
@@ -17,6 +17,7 @@ Required Properties:
- "renesas,gpio-r8a7796": for R8A7796 (R-Car M3-W) compatible GPIO controller.
- "renesas,gpio-r8a77965": for R8A77965 (R-Car M3-N) compatible GPIO controller.
- "renesas,gpio-r8a77970": for R8A77970 (R-Car V3M) compatible GPIO controller.
+ - "renesas,gpio-r8a77980": for R8A77980 (R-Car V3H) compatible GPIO controller.
- "renesas,gpio-r8a77990": for R8A77990 (R-Car E3) compatible GPIO controller.
- "renesas,gpio-r8a77995": for R8A77995 (R-Car D3) compatible GPIO controller.
- "renesas,rcar-gen1-gpio": for a generic R-Car Gen1 GPIO controller.
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt
new file mode 100644
index 000000000000..f9231df17c2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt
@@ -0,0 +1,32 @@
+Rockchip RK3328 GRF (General Register Files) GPIO controller.
+
+In Rockchip RK3328, the output only GPIO_MUTE pin, originally for codec mute
+control, can also be used for general purpose. It is manipulated by the
+GRF_SOC_CON10 register in GRF. Aside from the GPIO_MUTE pin, the HDMI pins can
+also be set in the same way.
+
+Currently this GPIO controller only supports the mute pin. If needed in the
+future, the HDMI pins support can also be added.
+
+Required properties:
+- compatible: Should contain "rockchip,rk3328-grf-gpio".
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be 2. The first cell is the pin number and
+ the second cell is used to specify the gpio polarity:
+ 0 = Active high,
+ 1 = Active low.
+
+Example:
+
+ grf: syscon@ff100000 {
+ compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
+
+ grf_gpio: grf-gpio {
+ compatible = "rockchip,rk3328-grf-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+Note: The grf_gpio node should be declared as the child of the GRF (General
+Register File) node. The GPIO_MUTE pin is referred to as <&grf_gpio 0>.