Merge branch 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - New drivers: UniPhier (with and without FIFO)

 - some drivers got some bigger rework: ismt, designware, img-scb (rcar
   had to be reverted because issues were showing up just lately)

 - ACPI: reworked the device scanning and added support for muxes

... and quite a lot of driver bugfixes and cleanups this time.  All
files touched outside of the i2c realm have proper acks.

* 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits)
  i2c: rcar: Revert the latest refactoring series
  i2c: pnx: remove superfluous assignment
  MAINTAINERS: i2c: drop i2c-pnx maintainer
  MAINTAINERS: i2c: mark also subdirectories as maintained
  i2c: cadence: enable driver for ARM64
  i2c: i801: Document Intel DNV and Broxton
  i2c: at91: manage unexpected RXRDY flag when starting a transfer
  i2c: pnx: Use setup_timer instead of open coding it
  i2c: add ACPI support for I2C mux ports
  acpi: add acpi_preset_companion() stub
  i2c: pxa: Add support for pxa910/988 & new configuration features
  i2c: au1550: Convert to devm_kzalloc and devm_ioremap_resource
  i2c-dev: Fix I2C_SLAVE ioctl comment
  i2c-dev: Fix typo in ioctl name reference
  i2c: sirf: tune the divider to make i2c bus freq more accurate
  i2c: imx: Use -ENXIO as error in the NACK case
  i2c: i801: Add support for Intel Broxton
  i2c: i801: Add support for Intel DNV
  i2c: mediatek: add i2c resume support
  i2c: imx: implement bus recovery
  ...

8 files changed, 124 insertions, 3 deletions

diff --git a/Documentation/acpi/i2c-muxes.txt b/Documentation/acpi/i2c-muxes.txt
new file mode 100644
index 000000000000..9fcc4f0b885e
--- /dev/null
+++ b/Documentation/acpi/i2c-muxes.txt
@@ -0,0 +1,58 @@
+ACPI I2C Muxes
+--------------
+
+Describing an I2C device hierarchy that includes I2C muxes requires an ACPI
+Device () scope per mux channel.
+
+Consider this topology:
+
++------+   +------+
+| SMB1 |-->| MUX0 |--CH00--> i2c client A (0x50)
+|      |   | 0x70 |--CH01--> i2c client B (0x50)
++------+   +------+
+
+which corresponds to the following ASL:
+
+Device (SMB1)
+{
+    Name (_HID, ...)
+    Device (MUX0)
+    {
+        Name (_HID, ...)
+        Name (_CRS, ResourceTemplate () {
+            I2cSerialBus (0x70, ControllerInitiated, I2C_SPEED,
+                          AddressingMode7Bit, "^SMB1", 0x00,
+                          ResourceConsumer,,)
+        }
+
+        Device (CH00)
+        {
+            Name (_ADR, 0)
+
+            Device (CLIA)
+            {
+                Name (_HID, ...)
+                Name (_CRS, ResourceTemplate () {
+                    I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED,
+                                  AddressingMode7Bit, "^CH00", 0x00,
+                                  ResourceConsumer,,)
+                }
+            }
+        }
+
+        Device (CH01)
+        {
+            Name (_ADR, 1)
+
+            Device (CLIB)
+            {
+                Name (_HID, ...)
+                Name (_CRS, ResourceTemplate () {
+                    I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED,
+                                  AddressingMode7Bit, "^CH01", 0x00,
+                                  ResourceConsumer,,)
+                }
+            }
+        }
+    }
+}
diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
index a4e1cbc810c1..5b123e0e4cc2 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
@@ -1,10 +1,10 @@
-* Texas Instruments Davinci I2C
+* Texas Instruments Davinci/Keystone I2C
 
 This file provides information, what the device node for the
-davinci i2c interface contain.
+davinci/keystone i2c interface contains.
 
 Required properties:
-- compatible: "ti,davinci-i2c";
+- compatible: "ti,davinci-i2c" or "ti,keystone-i2c";
 - reg : Offset and length of the register set for the device
 
 Recommended properties :
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
index ce4311d726ae..eab5836ba7f9 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
@@ -14,6 +14,10 @@ Optional properties:
   The absence of the propoerty indicates the default frequency 100 kHz.
 - dmas: A list of two dma specifiers, one for each entry in dma-names.
 - dma-names: should contain "tx" and "rx".
+- scl-gpios: specify the gpio related to SCL pin
+- sda-gpios: specify the gpio related to SDA pin
+- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
+  bus recovery, call it "gpio" state
 
 Examples:
 
@@ -37,4 +41,9 @@ i2c0: i2c@40066000 { /* i2c0 on vf610 */
 	dmas = <&edma0 0 50>,
 		<&edma0 0 51>;
 	dma-names = "rx","tx";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
index 16b3e07aa98f..ea406eb20fa5 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
@@ -10,6 +10,7 @@ Required properties:
 	"renesas,i2c-r8a7792"
 	"renesas,i2c-r8a7793"
 	"renesas,i2c-r8a7794"
+	"renesas,i2c-r8a7795"
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: interrupt specifier.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
index 2bfc6e7ed094..214f94c25d37 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
@@ -10,6 +10,7 @@ Required properties:
 			- "renesas,iic-r8a7792" (R-Car V2H)
 			- "renesas,iic-r8a7793" (R-Car M2-N)
 			- "renesas,iic-r8a7794" (R-Car E2)
+			- "renesas,iic-r8a7795" (R-Car H3)
 			- "renesas,iic-sh73a0" (SH-Mobile AG5)
 - reg             : address start and address range size of device
 - interrupts      : interrupt of device
diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt
new file mode 100644
index 000000000000..27fc6f8c798b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt
@@ -0,0 +1,25 @@
+UniPhier I2C controller (FIFO-builtin)
+
+Required properties:
+- compatible: should be "socionext,uniphier-fi2c".
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- reg: offset and length of the register set for the device.
+- interrupts: a single interrupt specifier.
+- clocks: phandle to the input clock.
+
+Optional properties:
+- clock-frequency: desired I2C bus frequency in Hz.  The maximum supported
+  value is 400000.  Defaults to 100000 if not specified.
+
+Examples:
+
+	i2c0: i2c@58780000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58780000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 41 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt
new file mode 100644
index 000000000000..26f9d95b3436
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt
@@ -0,0 +1,25 @@
+UniPhier I2C controller (FIFO-less)
+
+Required properties:
+- compatible: should be "socionext,uniphier-i2c".
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- reg: offset and length of the register set for the device.
+- interrupts: a single interrupt specifier.
+- clocks: phandle to the input clock.
+
+Optional properties:
+- clock-frequency: desired I2C bus frequency in Hz.  The maximum supported
+  value is 400000.  Defaults to 100000 if not specified.
+
+Examples:
+
+	i2c0: i2c@58400000 {
+		compatible = "socionext,uniphier-i2c";
+		reg = <0x58400000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 41 1>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 82f48f774afb..6a4b1af724f8 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -30,6 +30,8 @@ Supported adapters:
   * Intel BayTrail (SOC)
   * Intel Sunrise Point-H (PCH)
   * Intel Sunrise Point-LP (PCH)
+  * Intel DNV (SOC)
+  * Intel Broxton (SOC)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller