Merge tag 'v4.4.5' into toradex_vf_4.4-next

This is the 4.4.5 stable release

3 files changed, 22 insertions, 12 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 3a4abfc44f5e..136ba17d2da0 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -134,19 +134,21 @@ Description:
 		enabled for the device. Developer can write y/Y/1 or n/N/0 to
 		the file to enable/disable the feature.
 
-What:		/sys/bus/usb/devices/.../power/usb3_hardware_lpm
-Date:		June 2015
+What:		/sys/bus/usb/devices/.../power/usb3_hardware_lpm_u1
+		/sys/bus/usb/devices/.../power/usb3_hardware_lpm_u2
+Date:		November 2015
 Contact:	Kevin Strasser <kevin.strasser@linux.intel.com>
+		Lu Baolu <baolu.lu@linux.intel.com>
 Description:
 		If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged
 		in to a xHCI host which supports link PM, it will check if U1
 		and U2 exit latencies have been set in the BOS descriptor; if
-		the check is is passed and the host supports USB3 hardware LPM,
+		the check is passed and the host supports USB3 hardware LPM,
 		USB3 hardware LPM will be enabled for the device and the USB
-		device directory will contain a file named
-		power/usb3_hardware_lpm. The file holds a string value (enable
-		or disable) indicating whether or not USB3 hardware LPM is
-		enabled for the device.
+		device directory will contain two files named
+		power/usb3_hardware_lpm_u1 and power/usb3_hardware_lpm_u2. These
+		files hold a string value (enable or disable) indicating whether
+		or not USB3 hardware LPM U1 or U2 is enabled for the device.
 
 What:		/sys/bus/usb/devices/.../removable
 Date:		February 2012
diff --git a/Documentation/filesystems/efivarfs.txt b/Documentation/filesystems/efivarfs.txt
index c477af086e65..686a64bba775 100644
--- a/Documentation/filesystems/efivarfs.txt
+++ b/Documentation/filesystems/efivarfs.txt
@@ -14,3 +14,10 @@ filesystem.
 efivarfs is typically mounted like this,
 
 	mount -t efivarfs none /sys/firmware/efi/efivars
+
+Due to the presence of numerous firmware bugs where removing non-standard
+UEFI variables causes the system firmware to fail to POST, efivarfs
+files that are not well-known standardized variables are created
+as immutable files.  This doesn't prevent removal - "chattr -i" will work -
+but it does prevent this kind of failure from being accomplished
+accidentally.
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index 4a15c90bc11d..0a94ffe17ab6 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -537,17 +537,18 @@ relevant attribute files are usb2_hardware_lpm and usb3_hardware_lpm.
 		can write y/Y/1 or n/N/0 to the file to	enable/disable
 		USB2 hardware LPM manually. This is for	test purpose mainly.
 
-	power/usb3_hardware_lpm
+	power/usb3_hardware_lpm_u1
+	power/usb3_hardware_lpm_u2
 
 		When a USB 3.0 lpm-capable device is plugged in to a
 		xHCI host which supports link PM, it will check if U1
 		and U2 exit latencies have been set in the BOS
 		descriptor; if the check is is passed and the host
 		supports USB3 hardware LPM, USB3 hardware LPM will be
-		enabled for the device and this file will be created.
-		The file holds a string value (enable or disable)
-		indicating whether or not USB3 hardware LPM is
-		enabled for the device.
+		enabled for the device and these files will be created.
+		The files hold a string value (enable or disable)
+		indicating whether or not USB3 hardware LPM U1 or U2
+		is enabled for the device.
 
 	USB Port Power Control
 	----------------------