Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (180 commits)
  powerpc: clean up ssi.txt, add definition for fsl,ssi-asynchronous
  powerpc/85xx: Add support for the "socrates" board (MPC8544).
  powerpc: Fix bugs introduced by sysfs changes
  powerpc: Sanitize stack pointer in signal handling code
  powerpc: Add write barrier before enabling DTL flags
  powerpc/83xx: Update ranges in gianfar node to match other dts
  powerpc/86xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/83xx: Add power management support for MPC837x boards
  powerpc/mm: Introduce early_init_mmu() on 64-bit
  powerpc/mm: Add option for non-atomic PTE updates to ppc64
  powerpc/mm: Fix printk type warning in mmu_context_nohash
  powerpc/mm: Rename arch/powerpc/kernel/mmap.c to mmap_64.c
  powerpc/mm: Merge various PTE bits and accessors definitions
  powerpc/mm: Tweak PTE bit combination definitions
  powerpc/cell: Fix iommu exception reporting
  powerpc/mm: e300c2/c3/c4 TLB errata workaround
  powerpc/mm: Used free register to save a few cycles in SW TLB miss handling
  powerpc/mm: Remove unused register usage in SW TLB miss handling
  ...

3 files changed, 81 insertions, 45 deletions

diff --git a/Documentation/powerpc/dts-bindings/fsl/dma.txt b/Documentation/powerpc/dts-bindings/fsl/dma.txt
index cc453110fc46..0732cdd05ba1 100644
--- a/Documentation/powerpc/dts-bindings/fsl/dma.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/dma.txt
@@ -35,30 +35,30 @@ Example:
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
-		reg = <82a8 4>;
-		ranges = <0 8100 1a4>;
+		reg = <0x82a8 4>;
+		ranges = <0 0x8100 0x1a4>;
 		interrupt-parent = <&ipic>;
-		interrupts = <47 8>;
+		interrupts = <71 8>;
 		cell-index = <0>;
 		dma-channel@0 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <0>;
-			reg = <0 80>;
+			reg = <0 0x80>;
 		};
 		dma-channel@80 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <1>;
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 		};
 		dma-channel@100 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <2>;
-			reg = <100 80>;
+			reg = <0x100 0x80>;
 		};
 		dma-channel@180 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <3>;
-			reg = <180 80>;
+			reg = <0x180 0x80>;
 		};
 	};
 
@@ -93,36 +93,36 @@ Example:
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
-		reg = <21300 4>;
-		ranges = <0 21100 200>;
+		reg = <0x21300 4>;
+		ranges = <0 0x21100 0x200>;
 		cell-index = <0>;
 		dma-channel@0 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <0 80>;
+			reg = <0 0x80>;
 			cell-index = <0>;
 			interrupt-parent = <&mpic>;
-			interrupts = <14 2>;
+			interrupts = <20 2>;
 		};
 		dma-channel@80 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 			cell-index = <1>;
 			interrupt-parent = <&mpic>;
-			interrupts = <15 2>;
+			interrupts = <21 2>;
 		};
 		dma-channel@100 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <100 80>;
+			reg = <0x100 0x80>;
 			cell-index = <2>;
 			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
+			interrupts = <22 2>;
 		};
 		dma-channel@180 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <180 80>;
+			reg = <0x180 0x80>;
 			cell-index = <3>;
 			interrupt-parent = <&mpic>;
-			interrupts = <17 2>;
+			interrupts = <23 2>;
 		};
 	};
 
diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
new file mode 100644
index 000000000000..600846557763
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
@@ -0,0 +1,24 @@
+* Freescale Enhanced Secure Digital Host Controller (eSDHC)
+
+The Enhanced Secure Digital Host Controller provides an interface
+for MMC, SD, and SDIO types of memory cards.
+
+Required properties:
+  - compatible : should be
+    "fsl,<chip>-esdhc", "fsl,mpc8379-esdhc" for MPC83xx processors.
+    "fsl,<chip>-esdhc", "fsl,mpc8536-esdhc" for MPC85xx processors.
+  - reg : should contain eSDHC registers location and length.
+  - interrupts : should contain eSDHC interrupt.
+  - interrupt-parent : interrupt source phandle.
+  - clock-frequency : specifies eSDHC base clock frequency.
+
+Example:
+
+sdhci@2e000 {
+	compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+	reg = <0x2e000 0x1000>;
+	interrupts = <42 0x8>;
+	interrupt-parent = <&ipic>;
+	/* Filled in by U-Boot */
+	clock-frequency = <0>;
+};
diff --git a/Documentation/powerpc/dts-bindings/fsl/ssi.txt b/Documentation/powerpc/dts-bindings/fsl/ssi.txt
index a2d963998a65..5ff76c9c57d2 100644
--- a/Documentation/powerpc/dts-bindings/fsl/ssi.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/ssi.txt
@@ -4,44 +4,56 @@ The SSI is a serial device that communicates with audio codecs.  It can
 be programmed in AC97, I2S, left-justified, or right-justified modes.
 
 Required properties:
-- compatible	  : compatible list, containing "fsl,ssi"
-- cell-index	  : the SSI, <0> = SSI1, <1> = SSI2, and so on
-- reg		  : offset and length of the register set for the device
-- interrupts	  : <a b> where a is the interrupt number and b is a
-                     field that represents an encoding of the sense and
-		    level information for the interrupt.  This should be
-		    encoded based on the information in section 2)
-		    depending on the type of interrupt controller you
-		    have.
-- interrupt-parent : the phandle for the interrupt controller that
-                     services interrupts for this device.
-- fsl,mode	  : the operating mode for the SSI interface
-		    "i2s-slave" - I2S mode, SSI is clock slave
-		    "i2s-master" - I2S mode, SSI is clock master
-		    "lj-slave" - left-justified mode, SSI is clock slave
-		    "lj-master" - l.j. mode, SSI is clock master
-		    "rj-slave" - right-justified mode, SSI is clock slave
-		    "rj-master" - r.j., SSI is clock master
-		    "ac97-slave" - AC97 mode, SSI is clock slave
-		    "ac97-master" - AC97 mode, SSI is clock master
-- fsl,playback-dma: phandle to a node for the DMA channel to use for
+- compatible:       Compatible list, contains "fsl,ssi".
+- cell-index:       The SSI, <0> = SSI1, <1> = SSI2, and so on.
+- reg:              Offset and length of the register set for the device.
+- interrupts:       <a b> where a is the interrupt number and b is a
+                    field that represents an encoding of the sense and
+                    level information for the interrupt.  This should be
+                    encoded based on the information in section 2)
+                    depending on the type of interrupt controller you
+                    have.
+- interrupt-parent: The phandle for the interrupt controller that
+                    services interrupts for this device.
+- fsl,mode:         The operating mode for the SSI interface.
+                    "i2s-slave" - I2S mode, SSI is clock slave
+                    "i2s-master" - I2S mode, SSI is clock master
+                    "lj-slave" - left-justified mode, SSI is clock slave
+                    "lj-master" - l.j. mode, SSI is clock master
+                    "rj-slave" - right-justified mode, SSI is clock slave
+                    "rj-master" - r.j., SSI is clock master
+                    "ac97-slave" - AC97 mode, SSI is clock slave
+                    "ac97-master" - AC97 mode, SSI is clock master
+- fsl,playback-dma: Phandle to a node for the DMA channel to use for
                     playback of audio.  This is typically dictated by SOC
                     design.  See the notes below.
-- fsl,capture-dma:  phandle to a node for the DMA channel to use for
+- fsl,capture-dma:  Phandle to a node for the DMA channel to use for
                     capture (recording) of audio.  This is typically dictated
                     by SOC design.  See the notes below.
+- fsl,fifo-depth:   The number of elements in the transmit and receive FIFOs.
+                    This number is the maximum allowed value for SFCSR[TFWM0].
+- fsl,ssi-asynchronous:
+                    If specified, the SSI is to be programmed in asynchronous
+                    mode.  In this mode, pins SRCK, STCK, SRFS, and STFS must
+                    all be connected to valid signals.  In synchronous mode,
+                    SRCK and SRFS are ignored.  Asynchronous mode allows
+                    playback and capture to use different sample sizes and
+                    sample rates.  Some drivers may require that SRCK and STCK
+                    be connected together, and SRFS and STFS be connected
+                    together.  This would still allow different sample sizes,
+                    but not different sample rates.
 
 Optional properties:
-- codec-handle	  : phandle to a 'codec' node that defines an audio
-		    codec connected to this SSI.  This node is typically
-		    a child of an I2C or other control node.
+- codec-handle:     Phandle to a 'codec' node that defines an audio
+                    codec connected to this SSI.  This node is typically
+                    a child of an I2C or other control node.
 
 Child 'codec' node required properties:
-- compatible	  : compatible list, contains the name of the codec
+- compatible:       Compatible list, contains the name of the codec
 
 Child 'codec' node optional properties:
-- clock-frequency  : The frequency of the input clock, which typically
-                     comes from an on-board dedicated oscillator.
+- clock-frequency:  The frequency of the input clock, which typically comes
+                    from an on-board dedicated oscillator.
 
 Notes on fsl,playback-dma and fsl,capture-dma: