Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (183 commits)
  [TG3]: Update version to 3.78.
  [TG3]: Add missing NVRAM strapping.
  [TG3]: Enable auto MDI.
  [TG3]: Fix the polarity bit.
  [TG3]: Fix irq_sync race condition.
  [NET_SCHED]: ematch: module autoloading
  [TCP]: tcp probe wraparound handling and other changes
  [RTNETLINK]: rtnl_link: allow specifying initial device address
  [RTNETLINK]: rtnl_link API simplification
  [VLAN]: Fix MAC address handling
  [ETH]: Validate address in eth_mac_addr
  [NET]: Fix races in net_rx_action vs netpoll.
  [AF_UNIX]: Rewrite garbage collector, fixes race.
  [NETFILTER]: {ip, nf}_conntrack_sctp: fix remotely triggerable NULL ptr dereference (CVE-2007-2876)
  [NET]: Make all initialized struct seq_operations const.
  [UDP]: Fix length check.
  [IPV6]: Remove unneeded pointer idev from addrconf_cleanup().
  [DECNET]: Another unnecessary net/tcp.h inclusion in net/dn.h
  [IPV6]: Make IPV6_{RECV,2292}RTHDR boolean options.
  [IPV6]: Do not send RH0 anymore.
  ...

Fixed up trivial conflict in Documentation/feature-removal-schedule.txt
manually.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

5 files changed, 321 insertions, 27 deletions

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 281458b47d75..0599a0c7c026 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -262,25 +262,6 @@ Who:	Richard Purdie <rpurdie@rpsys.net>
 
 ---------------------------
 
-What:	Multipath cached routing support in ipv4
-When:	in 2.6.23
-Why:	Code was merged, then submitter immediately disappeared leaving
-	us with no maintainer and lots of bugs.  The code should not have
-	been merged in the first place, and many aspects of it's
-	implementation are blocking more critical core networking
-	development.  It's marked EXPERIMENTAL and no distribution
-	enables it because it cause obscure crashes due to unfixable bugs
-	(interfaces don't return errors so memory allocation can't be
-	handled, calling contexts of these interfaces make handling
-	errors impossible too because they get called after we've
-	totally commited to creating a route object, for example).
-	This problem has existed for years and no forward progress
-	has ever been made, and nobody steps up to try and salvage
-	this code, so we're going to finally just get rid of it.
-Who:	David S. Miller <davem@davemloft.net>
-
----------------------------
-
 What:	read_dev_chars(), read_conf_data{,_lpm}() (s390 common I/O layer)
 When:	December 2007
 Why:	These functions are a leftover from 2.4 times. They have several
@@ -337,3 +318,11 @@ Who:	Jean Delvare <khali@linux-fr.org>
 
 ---------------------------
 
+What:	iptables SAME target
+When:	1.1. 2008
+Files:	net/ipv4/netfilter/ipt_SAME.c, include/linux/netfilter_ipv4/ipt_SAME.h
+Why:	Obsolete for multiple years now, NAT core provides the same behaviour.
+	Unfixable broken wrt. 32/64 bit cleanness.
+Who:	Patrick McHardy <kaber@trash.net>
+
+---------------------------
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index af6a63ab9026..09c184e41cf8 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -874,8 +874,7 @@ accept_redirects - BOOLEAN
 accept_source_route - INTEGER
 	Accept source routing (routing extension header).
 
-	> 0: Accept routing header.
-	= 0: Accept only routing header type 2.
+	>= 0: Accept only routing header type 2.
 	< 0: Do not accept routing header.
 
 	Default: 0
diff --git a/Documentation/networking/l2tp.txt b/Documentation/networking/l2tp.txt
new file mode 100644
index 000000000000..2451f551c505
--- /dev/null
+++ b/Documentation/networking/l2tp.txt
@@ -0,0 +1,169 @@
+This brief document describes how to use the kernel's PPPoL2TP driver
+to provide L2TP functionality. L2TP is a protocol that tunnels one or
+more PPP sessions over a UDP tunnel. It is commonly used for VPNs
+(L2TP/IPSec) and by ISPs to tunnel subscriber PPP sessions over an IP
+network infrastructure.
+
+Design
+======
+
+The PPPoL2TP driver, drivers/net/pppol2tp.c, provides a mechanism by
+which PPP frames carried through an L2TP session are passed through
+the kernel's PPP subsystem. The standard PPP daemon, pppd, handles all
+PPP interaction with the peer. PPP network interfaces are created for
+each local PPP endpoint.
+
+The L2TP protocol http://www.faqs.org/rfcs/rfc2661.html defines L2TP
+control and data frames. L2TP control frames carry messages between
+L2TP clients/servers and are used to setup / teardown tunnels and
+sessions. An L2TP client or server is implemented in userspace and
+will use a regular UDP socket per tunnel. L2TP data frames carry PPP
+frames, which may be PPP control or PPP data. The kernel's PPP
+subsystem arranges for PPP control frames to be delivered to pppd,
+while data frames are forwarded as usual.
+
+Each tunnel and session within a tunnel is assigned a unique tunnel_id
+and session_id. These ids are carried in the L2TP header of every
+control and data packet. The pppol2tp driver uses them to lookup
+internal tunnel and/or session contexts. Zero tunnel / session ids are
+treated specially - zero ids are never assigned to tunnels or sessions
+in the network. In the driver, the tunnel context keeps a pointer to
+the tunnel UDP socket. The session context keeps a pointer to the
+PPPoL2TP socket, as well as other data that lets the driver interface
+to the kernel PPP subsystem.
+
+Note that the pppol2tp kernel driver handles only L2TP data frames;
+L2TP control frames are simply passed up to userspace in the UDP
+tunnel socket. The kernel handles all datapath aspects of the
+protocol, including data packet resequencing (if enabled).
+
+There are a number of requirements on the userspace L2TP daemon in
+order to use the pppol2tp driver.
+
+1. Use a UDP socket per tunnel.
+
+2. Create a single PPPoL2TP socket per tunnel bound to a special null
+   session id. This is used only for communicating with the driver but
+   must remain open while the tunnel is active. Opening this tunnel
+   management socket causes the driver to mark the tunnel socket as an
+   L2TP UDP encapsulation socket and flags it for use by the
+   referenced tunnel id. This hooks up the UDP receive path via
+   udp_encap_rcv() in net/ipv4/udp.c. PPP data frames are never passed
+   in this special PPPoX socket.
+
+3. Create a PPPoL2TP socket per L2TP session. This is typically done
+   by starting pppd with the pppol2tp plugin and appropriate
+   arguments. A PPPoL2TP tunnel management socket (Step 2) must be
+   created before the first PPPoL2TP session socket is created.
+
+When creating PPPoL2TP sockets, the application provides information
+to the driver about the socket in a socket connect() call. Source and
+destination tunnel and session ids are provided, as well as the file
+descriptor of a UDP socket. See struct pppol2tp_addr in
+include/linux/if_ppp.h. Note that zero tunnel / session ids are
+treated specially. When creating the per-tunnel PPPoL2TP management
+socket in Step 2 above, zero source and destination session ids are
+specified, which tells the driver to prepare the supplied UDP file
+descriptor for use as an L2TP tunnel socket.
+
+Userspace may control behavior of the tunnel or session using
+setsockopt and ioctl on the PPPoX socket. The following socket
+options are supported:-
+
+DEBUG     - bitmask of debug message categories. See below.
+SENDSEQ   - 0 => don't send packets with sequence numbers
+            1 => send packets with sequence numbers
+RECVSEQ   - 0 => receive packet sequence numbers are optional
+            1 => drop receive packets without sequence numbers
+LNSMODE   - 0 => act as LAC.
+            1 => act as LNS.
+REORDERTO - reorder timeout (in millisecs). If 0, don't try to reorder.
+
+Only the DEBUG option is supported by the special tunnel management
+PPPoX socket.
+
+In addition to the standard PPP ioctls, a PPPIOCGL2TPSTATS is provided
+to retrieve tunnel and session statistics from the kernel using the
+PPPoX socket of the appropriate tunnel or session.
+
+Debugging
+=========
+
+The driver supports a flexible debug scheme where kernel trace
+messages may be optionally enabled per tunnel and per session. Care is
+needed when debugging a live system since the messages are not
+rate-limited and a busy system could be swamped. Userspace uses
+setsockopt on the PPPoX socket to set a debug mask.
+
+The following debug mask bits are available:
+
+PPPOL2TP_MSG_DEBUG    verbose debug (if compiled in)
+PPPOL2TP_MSG_CONTROL  userspace - kernel interface
+PPPOL2TP_MSG_SEQ      sequence numbers handling
+PPPOL2TP_MSG_DATA     data packets
+
+Sample Userspace Code
+=====================
+
+1. Create tunnel management PPPoX socket
+
+        kernel_fd = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
+        if (kernel_fd >= 0) {
+                struct sockaddr_pppol2tp sax;
+                struct sockaddr_in const *peer_addr;
+
+                peer_addr = l2tp_tunnel_get_peer_addr(tunnel);
+                memset(&sax, 0, sizeof(sax));
+                sax.sa_family = AF_PPPOX;
+                sax.sa_protocol = PX_PROTO_OL2TP;
+                sax.pppol2tp.fd = udp_fd;       /* fd of tunnel UDP socket */
+                sax.pppol2tp.addr.sin_addr.s_addr = peer_addr->sin_addr.s_addr;
+                sax.pppol2tp.addr.sin_port = peer_addr->sin_port;
+                sax.pppol2tp.addr.sin_family = AF_INET;
+                sax.pppol2tp.s_tunnel = tunnel_id;
+                sax.pppol2tp.s_session = 0;     /* special case: mgmt socket */
+                sax.pppol2tp.d_tunnel = 0;
+                sax.pppol2tp.d_session = 0;     /* special case: mgmt socket */
+
+                if(connect(kernel_fd, (struct sockaddr *)&sax, sizeof(sax) ) < 0 ) {
+                        perror("connect failed");
+                        result = -errno;
+                        goto err;
+                }
+        }
+
+2. Create session PPPoX data socket
+
+        struct sockaddr_pppol2tp sax;
+        int fd;
+
+        /* Note, the target socket must be bound already, else it will not be ready */
+        sax.sa_family = AF_PPPOX;
+        sax.sa_protocol = PX_PROTO_OL2TP;
+        sax.pppol2tp.fd = tunnel_fd;
+        sax.pppol2tp.addr.sin_addr.s_addr = addr->sin_addr.s_addr;
+        sax.pppol2tp.addr.sin_port = addr->sin_port;
+        sax.pppol2tp.addr.sin_family = AF_INET;
+        sax.pppol2tp.s_tunnel  = tunnel_id;
+        sax.pppol2tp.s_session = session_id;
+        sax.pppol2tp.d_tunnel  = peer_tunnel_id;
+        sax.pppol2tp.d_session = peer_session_id;
+
+        /* session_fd is the fd of the session's PPPoL2TP socket.
+         * tunnel_fd is the fd of the tunnel UDP socket.
+         */
+        fd = connect(session_fd, (struct sockaddr *)&sax, sizeof(sax));
+        if (fd < 0 )    {
+                return -errno;
+        }
+        return 0;
+
+Miscellanous
+============
+
+The PPPoL2TP driver was developed as part of the OpenL2TP project by
+Katalix Systems Ltd. OpenL2TP is a full-featured L2TP client / server,
+designed from the ground up to have the L2TP datapath in the
+kernel. The project also implemented the pppol2tp plugin for pppd
+which allows pppd to use the kernel driver. Details can be found at
+http://openl2tp.sourceforge.net.
diff --git a/Documentation/networking/multiqueue.txt b/Documentation/networking/multiqueue.txt
new file mode 100644
index 000000000000..00b60cce2224
--- /dev/null
+++ b/Documentation/networking/multiqueue.txt
@@ -0,0 +1,111 @@
+
+		HOWTO for multiqueue network device support
+		===========================================
+
+Section 1: Base driver requirements for implementing multiqueue support
+Section 2: Qdisc support for multiqueue devices
+Section 3: Brief howto using PRIO or RR for multiqueue devices
+
+
+Intro: Kernel support for multiqueue devices
+---------------------------------------------------------
+
+Kernel support for multiqueue devices is only an API that is presented to the
+netdevice layer for base drivers to implement.  This feature is part of the
+core networking stack, and all network devices will be running on the
+multiqueue-aware stack.  If a base driver only has one queue, then these
+changes are transparent to that driver.
+
+
+Section 1: Base driver requirements for implementing multiqueue support
+-----------------------------------------------------------------------
+
+Base drivers are required to use the new alloc_etherdev_mq() or
+alloc_netdev_mq() functions to allocate the subqueues for the device.  The
+underlying kernel API will take care of the allocation and deallocation of
+the subqueue memory, as well as netdev configuration of where the queues
+exist in memory.
+
+The base driver will also need to manage the queues as it does the global
+netdev->queue_lock today.  Therefore base drivers should use the
+netif_{start|stop|wake}_subqueue() functions to manage each queue while the
+device is still operational.  netdev->queue_lock is still used when the device
+comes online or when it's completely shut down (unregister_netdev(), etc.).
+
+Finally, the base driver should indicate that it is a multiqueue device.  The
+feature flag NETIF_F_MULTI_QUEUE should be added to the netdev->features
+bitmap on device initialization.  Below is an example from e1000:
+
+#ifdef CONFIG_E1000_MQ
+	if ( (adapter->hw.mac.type == e1000_82571) ||
+	     (adapter->hw.mac.type == e1000_82572) ||
+	     (adapter->hw.mac.type == e1000_80003es2lan))
+		netdev->features |= NETIF_F_MULTI_QUEUE;
+#endif
+
+
+Section 2: Qdisc support for multiqueue devices
+-----------------------------------------------
+
+Currently two qdiscs support multiqueue devices.  A new round-robin qdisc,
+sch_rr, and sch_prio. The qdisc is responsible for classifying the skb's to
+bands and queues, and will store the queue mapping into skb->queue_mapping.
+Use this field in the base driver to determine which queue to send the skb
+to.
+
+sch_rr has been added for hardware that doesn't want scheduling policies from
+software, so it's a straight round-robin qdisc.  It uses the same syntax and
+classification priomap that sch_prio uses, so it should be intuitive to
+configure for people who've used sch_prio.
+
+The PRIO qdisc naturally plugs into a multiqueue device.  If PRIO has been
+built with NET_SCH_PRIO_MQ, then upon load, it will make sure the number of
+bands requested is equal to the number of queues on the hardware.  If they
+are equal, it sets a one-to-one mapping up between the queues and bands.  If
+they're not equal, it will not load the qdisc.  This is the same behavior
+for RR.  Once the association is made, any skb that is classified will have
+skb->queue_mapping set, which will allow the driver to properly queue skb's
+to multiple queues.
+
+
+Section 3: Brief howto using PRIO and RR for multiqueue devices
+---------------------------------------------------------------
+
+The userspace command 'tc,' part of the iproute2 package, is used to configure
+qdiscs.  To add the PRIO qdisc to your network device, assuming the device is
+called eth0, run the following command:
+
+# tc qdisc add dev eth0 root handle 1: prio bands 4 multiqueue
+
+This will create 4 bands, 0 being highest priority, and associate those bands
+to the queues on your NIC.  Assuming eth0 has 4 Tx queues, the band mapping
+would look like:
+
+band 0 => queue 0
+band 1 => queue 1
+band 2 => queue 2
+band 3 => queue 3
+
+Traffic will begin flowing through each queue if your TOS values are assigning
+traffic across the various bands.  For example, ssh traffic will always try to
+go out band 0 based on TOS -> Linux priority conversion (realtime traffic),
+so it will be sent out queue 0.  ICMP traffic (pings) fall into the "normal"
+traffic classification, which is band 1.  Therefore pings will be send out
+queue 1 on the NIC.
+
+Note the use of the multiqueue keyword.  This is only in versions of iproute2
+that support multiqueue networking devices; if this is omitted when loading
+a qdisc onto a multiqueue device, the qdisc will load and operate the same
+if it were loaded onto a single-queue device (i.e. - sends all traffic to
+queue 0).
+
+Another alternative to multiqueue band allocation can be done by using the
+multiqueue option and specify 0 bands.  If this is the case, the qdisc will
+allocate the number of bands to equal the number of queues that the device
+reports, and bring the qdisc online.
+
+The behavior of tc filters remains the same, where it will override TOS priority
+classification.
+
+
+Author: Peter P. Waskiewicz Jr. <peter.p.waskiewicz.jr@intel.com>
diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt
index ce1361f95243..37869295fc70 100644
--- a/Documentation/networking/netdevices.txt
+++ b/Documentation/networking/netdevices.txt
@@ -20,6 +20,30 @@ private data which gets freed when the network device is freed. If
 separately allocated data is attached to the network device
 (dev->priv) then it is up to the module exit handler to free that.
 
+MTU
+===
+Each network device has a Maximum Transfer Unit. The MTU does not
+include any link layer protocol overhead. Upper layer protocols must
+not pass a socket buffer (skb) to a device to transmit with more data
+than the mtu. The MTU does not include link layer header overhead, so
+for example on Ethernet if the standard MTU is 1500 bytes used, the
+actual skb will contain up to 1514 bytes because of the Ethernet
+header. Devices should allow for the 4 byte VLAN header as well.
+
+Segmentation Offload (GSO, TSO) is an exception to this rule.  The
+upper layer protocol may pass a large socket buffer to the device
+transmit routine, and the device will break that up into separate
+packets based on the current MTU.
+
+MTU is symmetrical and applies both to receive and transmit. A device
+must be able to receive at least the maximum size packet allowed by
+the MTU. A network device may use the MTU as mechanism to size receive
+buffers, but the device should allow packets with VLAN header. With
+standard Ethernet mtu of 1500 bytes, the device should allow up to
+1518 byte packets (1500 + 14 header + 4 tag).  The device may either:
+drop, truncate, or pass up oversize packets, but dropping oversize
+packets is preferred.
+
 
 struct net_device synchronization rules
 =======================================
@@ -43,16 +67,17 @@ dev->get_stats:
 
 dev->hard_start_xmit:
 	Synchronization: netif_tx_lock spinlock.
+
 	When the driver sets NETIF_F_LLTX in dev->features this will be
 	called without holding netif_tx_lock. In this case the driver
 	has to lock by itself when needed. It is recommended to use a try lock
-	for this and return -1 when the spin lock fails. 
+	for this and return NETDEV_TX_LOCKED when the spin lock fails.
 	The locking there should also properly protect against 
-	set_multicast_list
-	Context: Process with BHs disabled or BH (timer).
-	Notes: netif_queue_stopped() is guaranteed false
-               Interrupts must be enabled when calling hard_start_xmit.
-                (Interrupts must also be enabled when enabling the BH handler.)
+	set_multicast_list.
+
+	Context: Process with BHs disabled or BH (timer),
+	         will be called with interrupts disabled by netconsole.
+
 	Return codes: 
 	o NETDEV_TX_OK everything ok. 
 	o NETDEV_TX_BUSY Cannot transmit packet, try later 
@@ -74,4 +99,5 @@ dev->poll:
 	Synchronization: __LINK_STATE_RX_SCHED bit in dev->state.  See
 		dev_close code and comments in net/core/dev.c for more info.
 	Context: softirq
+	         will be called with interrupts disabled by netconsole.