Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits)
  bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL.
  vlan: Calling vlan_hwaccel_do_receive() is always valid.
  tproxy: use the interface primary IP address as a default value for --on-ip
  tproxy: added IPv6 support to the socket match
  cxgb3: function namespace cleanup
  tproxy: added IPv6 support to the TPROXY target
  tproxy: added IPv6 socket lookup function to nf_tproxy_core
  be2net: Changes to use only priority codes allowed by f/w
  tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled
  tproxy: added tproxy sockopt interface in the IPV6 layer
  tproxy: added udp6_lib_lookup function
  tproxy: added const specifiers to udp lookup functions
  tproxy: split off ipv6 defragmentation to a separate module
  l2tp: small cleanup
  nf_nat: restrict ICMP translation for embedded header
  can: mcp251x: fix generation of error frames
  can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set
  can-raw: add msg_flags to distinguish local traffic
  9p: client code cleanup
  rds: make local functions/variables static
  ...

Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and
drivers/net/wireless/ath/ath9k/debug.c as per David

10 files changed, 639 insertions, 358 deletions

diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl
new file mode 100644
index 000000000000..19a1210c2530
--- /dev/null
+++ b/Documentation/DocBook/80211.tmpl
@@ -0,0 +1,495 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE set PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+<set>
+  <setinfo>
+    <title>The 802.11 subsystems &ndash; for kernel developers</title>
+    <subtitle>
+      Explaining wireless 802.11 networking in the Linux kernel
+    </subtitle>
+
+    <copyright>
+      <year>2007-2009</year>
+      <holder>Johannes Berg</holder>
+    </copyright>
+
+    <authorgroup>
+      <author>
+        <firstname>Johannes</firstname>
+        <surname>Berg</surname>
+        <affiliation>
+          <address><email>johannes@sipsolutions.net</email></address>
+        </affiliation>
+      </author>
+    </authorgroup>
+
+    <legalnotice>
+      <para>
+        This documentation is free software; you can redistribute
+        it and/or modify it under the terms of the GNU General Public
+        License version 2 as published by the Free Software Foundation.
+      </para>
+      <para>
+        This documentation is distributed in the hope that it will be
+        useful, but WITHOUT ANY WARRANTY; without even the implied
+        warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+        See the GNU General Public License for more details.
+      </para>
+      <para>
+        You should have received a copy of the GNU General Public
+        License along with this documentation; if not, write to the Free
+        Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+        MA 02111-1307 USA
+      </para>
+      <para>
+        For more details see the file COPYING in the source
+        distribution of Linux.
+      </para>
+    </legalnotice>
+
+    <abstract>
+      <para>
+        These books attempt to give a description of the
+        various subsystems that play a role in 802.11 wireless
+        networking in Linux. Since these books are for kernel
+        developers they attempts to document the structures
+        and functions used in the kernel as well as giving a
+        higher-level overview.
+      </para>
+      <para>
+	The reader is expected to be familiar with the 802.11
+	standard as published by the IEEE in 802.11-2007 (or
+	possibly later versions). References to this standard
+	will be given as "802.11-2007 8.1.5".
+      </para>
+    </abstract>
+  </setinfo>
+  <book id="cfg80211-developers-guide">
+    <bookinfo>
+      <title>The cfg80211 subsystem</title>
+
+      <abstract>
+!Pinclude/net/cfg80211.h Introduction
+      </abstract>
+    </bookinfo>
+      <chapter>
+      <title>Device registration</title>
+!Pinclude/net/cfg80211.h Device registration
+!Finclude/net/cfg80211.h ieee80211_band
+!Finclude/net/cfg80211.h ieee80211_channel_flags
+!Finclude/net/cfg80211.h ieee80211_channel
+!Finclude/net/cfg80211.h ieee80211_rate_flags
+!Finclude/net/cfg80211.h ieee80211_rate
+!Finclude/net/cfg80211.h ieee80211_sta_ht_cap
+!Finclude/net/cfg80211.h ieee80211_supported_band
+!Finclude/net/cfg80211.h cfg80211_signal_type
+!Finclude/net/cfg80211.h wiphy_params_flags
+!Finclude/net/cfg80211.h wiphy_flags
+!Finclude/net/cfg80211.h wiphy
+!Finclude/net/cfg80211.h wireless_dev
+!Finclude/net/cfg80211.h wiphy_new
+!Finclude/net/cfg80211.h wiphy_register
+!Finclude/net/cfg80211.h wiphy_unregister
+!Finclude/net/cfg80211.h wiphy_free
+
+!Finclude/net/cfg80211.h wiphy_name
+!Finclude/net/cfg80211.h wiphy_dev
+!Finclude/net/cfg80211.h wiphy_priv
+!Finclude/net/cfg80211.h priv_to_wiphy
+!Finclude/net/cfg80211.h set_wiphy_dev
+!Finclude/net/cfg80211.h wdev_priv
+      </chapter>
+      <chapter>
+      <title>Actions and configuration</title>
+!Pinclude/net/cfg80211.h Actions and configuration
+!Finclude/net/cfg80211.h cfg80211_ops
+!Finclude/net/cfg80211.h vif_params
+!Finclude/net/cfg80211.h key_params
+!Finclude/net/cfg80211.h survey_info_flags
+!Finclude/net/cfg80211.h survey_info
+!Finclude/net/cfg80211.h beacon_parameters
+!Finclude/net/cfg80211.h plink_actions
+!Finclude/net/cfg80211.h station_parameters
+!Finclude/net/cfg80211.h station_info_flags
+!Finclude/net/cfg80211.h rate_info_flags
+!Finclude/net/cfg80211.h rate_info
+!Finclude/net/cfg80211.h station_info
+!Finclude/net/cfg80211.h monitor_flags
+!Finclude/net/cfg80211.h mpath_info_flags
+!Finclude/net/cfg80211.h mpath_info
+!Finclude/net/cfg80211.h bss_parameters
+!Finclude/net/cfg80211.h ieee80211_txq_params
+!Finclude/net/cfg80211.h cfg80211_crypto_settings
+!Finclude/net/cfg80211.h cfg80211_auth_request
+!Finclude/net/cfg80211.h cfg80211_assoc_request
+!Finclude/net/cfg80211.h cfg80211_deauth_request
+!Finclude/net/cfg80211.h cfg80211_disassoc_request
+!Finclude/net/cfg80211.h cfg80211_ibss_params
+!Finclude/net/cfg80211.h cfg80211_connect_params
+!Finclude/net/cfg80211.h cfg80211_pmksa
+!Finclude/net/cfg80211.h cfg80211_send_rx_auth
+!Finclude/net/cfg80211.h cfg80211_send_auth_timeout
+!Finclude/net/cfg80211.h __cfg80211_auth_canceled
+!Finclude/net/cfg80211.h cfg80211_send_rx_assoc
+!Finclude/net/cfg80211.h cfg80211_send_assoc_timeout
+!Finclude/net/cfg80211.h cfg80211_send_deauth
+!Finclude/net/cfg80211.h __cfg80211_send_deauth
+!Finclude/net/cfg80211.h cfg80211_send_disassoc
+!Finclude/net/cfg80211.h __cfg80211_send_disassoc
+!Finclude/net/cfg80211.h cfg80211_ibss_joined
+!Finclude/net/cfg80211.h cfg80211_connect_result
+!Finclude/net/cfg80211.h cfg80211_roamed
+!Finclude/net/cfg80211.h cfg80211_disconnected
+!Finclude/net/cfg80211.h cfg80211_ready_on_channel
+!Finclude/net/cfg80211.h cfg80211_remain_on_channel_expired
+!Finclude/net/cfg80211.h cfg80211_new_sta
+!Finclude/net/cfg80211.h cfg80211_rx_mgmt
+!Finclude/net/cfg80211.h cfg80211_mgmt_tx_status
+!Finclude/net/cfg80211.h cfg80211_cqm_rssi_notify
+!Finclude/net/cfg80211.h cfg80211_michael_mic_failure
+      </chapter>
+      <chapter>
+      <title>Scanning and BSS list handling</title>
+!Pinclude/net/cfg80211.h Scanning and BSS list handling
+!Finclude/net/cfg80211.h cfg80211_ssid
+!Finclude/net/cfg80211.h cfg80211_scan_request
+!Finclude/net/cfg80211.h cfg80211_scan_done
+!Finclude/net/cfg80211.h cfg80211_bss
+!Finclude/net/cfg80211.h cfg80211_inform_bss_frame
+!Finclude/net/cfg80211.h cfg80211_inform_bss
+!Finclude/net/cfg80211.h cfg80211_unlink_bss
+!Finclude/net/cfg80211.h cfg80211_find_ie
+!Finclude/net/cfg80211.h ieee80211_bss_get_ie
+      </chapter>
+      <chapter>
+      <title>Utility functions</title>
+!Pinclude/net/cfg80211.h Utility functions
+!Finclude/net/cfg80211.h ieee80211_channel_to_frequency
+!Finclude/net/cfg80211.h ieee80211_frequency_to_channel
+!Finclude/net/cfg80211.h ieee80211_get_channel
+!Finclude/net/cfg80211.h ieee80211_get_response_rate
+!Finclude/net/cfg80211.h ieee80211_hdrlen
+!Finclude/net/cfg80211.h ieee80211_get_hdrlen_from_skb
+!Finclude/net/cfg80211.h ieee80211_radiotap_iterator
+      </chapter>
+      <chapter>
+      <title>Data path helpers</title>
+!Pinclude/net/cfg80211.h Data path helpers
+!Finclude/net/cfg80211.h ieee80211_data_to_8023
+!Finclude/net/cfg80211.h ieee80211_data_from_8023
+!Finclude/net/cfg80211.h ieee80211_amsdu_to_8023s
+!Finclude/net/cfg80211.h cfg80211_classify8021d
+      </chapter>
+      <chapter>
+      <title>Regulatory enforcement infrastructure</title>
+!Pinclude/net/cfg80211.h Regulatory enforcement infrastructure
+!Finclude/net/cfg80211.h regulatory_hint
+!Finclude/net/cfg80211.h wiphy_apply_custom_regulatory
+!Finclude/net/cfg80211.h freq_reg_info
+      </chapter>
+      <chapter>
+      <title>RFkill integration</title>
+!Pinclude/net/cfg80211.h RFkill integration
+!Finclude/net/cfg80211.h wiphy_rfkill_set_hw_state
+!Finclude/net/cfg80211.h wiphy_rfkill_start_polling
+!Finclude/net/cfg80211.h wiphy_rfkill_stop_polling
+      </chapter>
+      <chapter>
+      <title>Test mode</title>
+!Pinclude/net/cfg80211.h Test mode
+!Finclude/net/cfg80211.h cfg80211_testmode_alloc_reply_skb
+!Finclude/net/cfg80211.h cfg80211_testmode_reply
+!Finclude/net/cfg80211.h cfg80211_testmode_alloc_event_skb
+!Finclude/net/cfg80211.h cfg80211_testmode_event
+      </chapter>
+  </book>
+  <book id="mac80211-developers-guide">
+    <bookinfo>
+      <title>The mac80211 subsystem</title>
+      <abstract>
+!Pinclude/net/mac80211.h Introduction
+!Pinclude/net/mac80211.h Warning
+      </abstract>
+    </bookinfo>
+
+    <toc></toc>
+
+  <!--
+  Generally, this document shall be ordered by increasing complexity.
+  It is important to note that readers should be able to read only
+  the first few sections to get a working driver and only advanced
+  usage should require reading the full document.
+  -->
+
+    <part>
+      <title>The basic mac80211 driver interface</title>
+      <partintro>
+        <para>
+          You should read and understand the information contained
+          within this part of the book while implementing a driver.
+          In some chapters, advanced usage is noted, that may be
+          skipped at first.
+        </para>
+        <para>
+          This part of the book only covers station and monitor mode
+          functionality, additional information required to implement
+          the other modes is covered in the second part of the book.
+        </para>
+      </partintro>
+
+      <chapter id="basics">
+        <title>Basic hardware handling</title>
+        <para>TBD</para>
+        <para>
+          This chapter shall contain information on getting a hw
+          struct allocated and registered with mac80211.
+        </para>
+        <para>
+          Since it is required to allocate rates/modes before registering
+          a hw struct, this chapter shall also contain information on setting
+          up the rate/mode structs.
+        </para>
+        <para>
+          Additionally, some discussion about the callbacks and
+          the general programming model should be in here, including
+          the definition of ieee80211_ops which will be referred to
+          a lot.
+        </para>
+        <para>
+          Finally, a discussion of hardware capabilities should be done
+          with references to other parts of the book.
+        </para>
+  <!-- intentionally multiple !F lines to get proper order -->
+!Finclude/net/mac80211.h ieee80211_hw
+!Finclude/net/mac80211.h ieee80211_hw_flags
+!Finclude/net/mac80211.h SET_IEEE80211_DEV
+!Finclude/net/mac80211.h SET_IEEE80211_PERM_ADDR
+!Finclude/net/mac80211.h ieee80211_ops
+!Finclude/net/mac80211.h ieee80211_alloc_hw
+!Finclude/net/mac80211.h ieee80211_register_hw
+!Finclude/net/mac80211.h ieee80211_get_tx_led_name
+!Finclude/net/mac80211.h ieee80211_get_rx_led_name
+!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
+!Finclude/net/mac80211.h ieee80211_get_radio_led_name
+!Finclude/net/mac80211.h ieee80211_unregister_hw
+!Finclude/net/mac80211.h ieee80211_free_hw
+      </chapter>
+
+      <chapter id="phy-handling">
+        <title>PHY configuration</title>
+        <para>TBD</para>
+        <para>
+          This chapter should describe PHY handling including
+          start/stop callbacks and the various structures used.
+        </para>
+!Finclude/net/mac80211.h ieee80211_conf
+!Finclude/net/mac80211.h ieee80211_conf_flags
+      </chapter>
+
+      <chapter id="iface-handling">
+        <title>Virtual interfaces</title>
+        <para>TBD</para>
+        <para>
+          This chapter should describe virtual interface basics
+          that are relevant to the driver (VLANs, MGMT etc are not.)
+          It should explain the use of the add_iface/remove_iface
+          callbacks as well as the interface configuration callbacks.
+        </para>
+        <para>Things related to AP mode should be discussed there.</para>
+        <para>
+          Things related to supporting multiple interfaces should be
+          in the appropriate chapter, a BIG FAT note should be here about
+          this though and the recommendation to allow only a single
+          interface in STA mode at first!
+        </para>
+!Finclude/net/mac80211.h ieee80211_vif
+      </chapter>
+
+      <chapter id="rx-tx">
+        <title>Receive and transmit processing</title>
+        <sect1>
+          <title>what should be here</title>
+          <para>TBD</para>
+          <para>
+            This should describe the receive and transmit
+            paths in mac80211/the drivers as well as
+            transmit status handling.
+          </para>
+        </sect1>
+        <sect1>
+          <title>Frame format</title>
+!Pinclude/net/mac80211.h Frame format
+        </sect1>
+        <sect1>
+          <title>Packet alignment</title>
+!Pnet/mac80211/rx.c Packet alignment
+        </sect1>
+        <sect1>
+          <title>Calling into mac80211 from interrupts</title>
+!Pinclude/net/mac80211.h Calling mac80211 from interrupts
+        </sect1>
+        <sect1>
+          <title>functions/definitions</title>
+!Finclude/net/mac80211.h ieee80211_rx_status
+!Finclude/net/mac80211.h mac80211_rx_flags
+!Finclude/net/mac80211.h ieee80211_tx_info
+!Finclude/net/mac80211.h ieee80211_rx
+!Finclude/net/mac80211.h ieee80211_rx_irqsafe
+!Finclude/net/mac80211.h ieee80211_tx_status
+!Finclude/net/mac80211.h ieee80211_tx_status_irqsafe
+!Finclude/net/mac80211.h ieee80211_rts_get
+!Finclude/net/mac80211.h ieee80211_rts_duration
+!Finclude/net/mac80211.h ieee80211_ctstoself_get
+!Finclude/net/mac80211.h ieee80211_ctstoself_duration
+!Finclude/net/mac80211.h ieee80211_generic_frame_duration
+!Finclude/net/mac80211.h ieee80211_wake_queue
+!Finclude/net/mac80211.h ieee80211_stop_queue
+!Finclude/net/mac80211.h ieee80211_wake_queues
+!Finclude/net/mac80211.h ieee80211_stop_queues
+        </sect1>
+      </chapter>
+
+      <chapter id="filters">
+        <title>Frame filtering</title>
+!Pinclude/net/mac80211.h Frame filtering
+!Finclude/net/mac80211.h ieee80211_filter_flags
+      </chapter>
+    </part>
+
+    <part id="advanced">
+      <title>Advanced driver interface</title>
+      <partintro>
+        <para>
+         Information contained within this part of the book is
+         of interest only for advanced interaction of mac80211
+         with drivers to exploit more hardware capabilities and
+         improve performance.
+        </para>
+      </partintro>
+
+      <chapter id="hardware-crypto-offload">
+        <title>Hardware crypto acceleration</title>
+!Pinclude/net/mac80211.h Hardware crypto acceleration
+  <!-- intentionally multiple !F lines to get proper order -->
+!Finclude/net/mac80211.h set_key_cmd
+!Finclude/net/mac80211.h ieee80211_key_conf
+!Finclude/net/mac80211.h ieee80211_key_flags
+      </chapter>
+
+      <chapter id="powersave">
+        <title>Powersave support</title>
+!Pinclude/net/mac80211.h Powersave support
+      </chapter>
+
+      <chapter id="beacon-filter">
+        <title>Beacon filter support</title>
+!Pinclude/net/mac80211.h Beacon filter support
+!Finclude/net/mac80211.h ieee80211_beacon_loss
+      </chapter>
+
+      <chapter id="qos">
+        <title>Multiple queues and QoS support</title>
+        <para>TBD</para>
+!Finclude/net/mac80211.h ieee80211_tx_queue_params
+      </chapter>
+
+      <chapter id="AP">
+        <title>Access point mode support</title>
+        <para>TBD</para>
+        <para>Some parts of the if_conf should be discussed here instead</para>
+        <para>
+          Insert notes about VLAN interfaces with hw crypto here or
+          in the hw crypto chapter.
+        </para>
+!Finclude/net/mac80211.h ieee80211_get_buffered_bc
+!Finclude/net/mac80211.h ieee80211_beacon_get
+      </chapter>
+
+      <chapter id="multi-iface">
+        <title>Supporting multiple virtual interfaces</title>
+        <para>TBD</para>
+        <para>
+          Note: WDS with identical MAC address should almost always be OK
+        </para>
+        <para>
+          Insert notes about having multiple virtual interfaces with
+          different MAC addresses here, note which configurations are
+          supported by mac80211, add notes about supporting hw crypto
+          with it.
+        </para>
+      </chapter>
+
+      <chapter id="hardware-scan-offload">
+        <title>Hardware scan offload</title>
+        <para>TBD</para>
+!Finclude/net/mac80211.h ieee80211_scan_completed
+      </chapter>
+    </part>
+
+    <part id="rate-control">
+      <title>Rate control interface</title>
+      <partintro>
+        <para>TBD</para>
+        <para>
+         This part of the book describes the rate control algorithm
+         interface and how it relates to mac80211 and drivers.
+        </para>
+      </partintro>
+      <chapter id="dummy">
+        <title>dummy chapter</title>
+        <para>TBD</para>
+      </chapter>
+    </part>
+
+    <part id="internal">
+      <title>Internals</title>
+      <partintro>
+        <para>TBD</para>
+        <para>
+         This part of the book describes mac80211 internals.
+        </para>
+      </partintro>
+
+      <chapter id="key-handling">
+        <title>Key handling</title>
+        <sect1>
+          <title>Key handling basics</title>
+!Pnet/mac80211/key.c Key handling basics
+        </sect1>
+        <sect1>
+          <title>MORE TBD</title>
+          <para>TBD</para>
+        </sect1>
+      </chapter>
+
+      <chapter id="rx-processing">
+        <title>Receive processing</title>
+        <para>TBD</para>
+      </chapter>
+
+      <chapter id="tx-processing">
+        <title>Transmit processing</title>
+        <para>TBD</para>
+      </chapter>
+
+      <chapter id="sta-info">
+        <title>Station info handling</title>
+        <sect1>
+          <title>Programming information</title>
+!Fnet/mac80211/sta_info.h sta_info
+!Fnet/mac80211/sta_info.h ieee80211_sta_info_flags
+        </sect1>
+        <sect1>
+          <title>STA information lifetime rules</title>
+!Pnet/mac80211/sta_info.c STA information lifetime rules
+        </sect1>
+      </chapter>
+
+      <chapter id="synchronisation">
+        <title>Synchronisation</title>
+        <para>TBD</para>
+        <para>Locking, lots of RCU</para>
+      </chapter>
+    </part>
+  </book>
+</set>
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 34929f24c284..8b6e00a71034 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -12,7 +12,7 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
-	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
+	    80211.xml debugobjects.xml sh.xml regulator.xml \
 	    alsa-driver-api.xml writing-an-alsa-driver.xml \
 	    tracepoint.xml media.xml drm.xml
 
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
deleted file mode 100644
index affb15a344a1..000000000000
--- a/Documentation/DocBook/mac80211.tmpl
+++ /dev/null
@@ -1,337 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="mac80211-developers-guide">
-  <bookinfo>
-    <title>The mac80211 subsystem for kernel developers</title>
-
-    <authorgroup>
-      <author>
-        <firstname>Johannes</firstname>
-        <surname>Berg</surname>
-        <affiliation>
-          <address><email>johannes@sipsolutions.net</email></address>
-        </affiliation>
-      </author>
-    </authorgroup>
-
-    <copyright>
-      <year>2007-2009</year>
-      <holder>Johannes Berg</holder>
-    </copyright>
-
-    <legalnotice>
-      <para>
-        This documentation is free software; you can redistribute
-        it and/or modify it under the terms of the GNU General Public
-        License version 2 as published by the Free Software Foundation.
-      </para>
-
-      <para>
-        This documentation is distributed in the hope that it will be
-        useful, but WITHOUT ANY WARRANTY; without even the implied
-        warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-        See the GNU General Public License for more details.
-      </para>
-
-      <para>
-        You should have received a copy of the GNU General Public
-        License along with this documentation; if not, write to the Free
-        Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-        MA 02111-1307 USA
-      </para>
-
-      <para>
-        For more details see the file COPYING in the source
-        distribution of Linux.
-      </para>
-    </legalnotice>
-
-    <abstract>
-!Pinclude/net/mac80211.h Introduction
-!Pinclude/net/mac80211.h Warning
-    </abstract>
-  </bookinfo>
-
-  <toc></toc>
-
-<!--
-Generally, this document shall be ordered by increasing complexity.
-It is important to note that readers should be able to read only
-the first few sections to get a working driver and only advanced
-usage should require reading the full document.
--->
-
-  <part>
-    <title>The basic mac80211 driver interface</title>
-    <partintro>
-      <para>
-        You should read and understand the information contained
-        within this part of the book while implementing a driver.
-        In some chapters, advanced usage is noted, that may be
-        skipped at first.
-      </para>
-      <para>
-        This part of the book only covers station and monitor mode
-        functionality, additional information required to implement
-        the other modes is covered in the second part of the book.
-      </para>
-    </partintro>
-
-    <chapter id="basics">
-      <title>Basic hardware handling</title>
-      <para>TBD</para>
-      <para>
-        This chapter shall contain information on getting a hw
-        struct allocated and registered with mac80211.
-      </para>
-      <para>
-        Since it is required to allocate rates/modes before registering
-        a hw struct, this chapter shall also contain information on setting
-        up the rate/mode structs.
-      </para>
-      <para>
-        Additionally, some discussion about the callbacks and
-        the general programming model should be in here, including
-        the definition of ieee80211_ops which will be referred to
-        a lot.
-      </para>
-      <para>
-        Finally, a discussion of hardware capabilities should be done
-        with references to other parts of the book.
-      </para>
-<!-- intentionally multiple !F lines to get proper order -->
-!Finclude/net/mac80211.h ieee80211_hw
-!Finclude/net/mac80211.h ieee80211_hw_flags
-!Finclude/net/mac80211.h SET_IEEE80211_DEV
-!Finclude/net/mac80211.h SET_IEEE80211_PERM_ADDR
-!Finclude/net/mac80211.h ieee80211_ops
-!Finclude/net/mac80211.h ieee80211_alloc_hw
-!Finclude/net/mac80211.h ieee80211_register_hw
-!Finclude/net/mac80211.h ieee80211_get_tx_led_name
-!Finclude/net/mac80211.h ieee80211_get_rx_led_name
-!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
-!Finclude/net/mac80211.h ieee80211_get_radio_led_name
-!Finclude/net/mac80211.h ieee80211_unregister_hw
-!Finclude/net/mac80211.h ieee80211_free_hw
-    </chapter>
-
-    <chapter id="phy-handling">
-      <title>PHY configuration</title>
-      <para>TBD</para>
-      <para>
-        This chapter should describe PHY handling including
-        start/stop callbacks and the various structures used.
-      </para>
-!Finclude/net/mac80211.h ieee80211_conf
-!Finclude/net/mac80211.h ieee80211_conf_flags
-    </chapter>
-
-    <chapter id="iface-handling">
-      <title>Virtual interfaces</title>
-      <para>TBD</para>
-      <para>
-        This chapter should describe virtual interface basics
-        that are relevant to the driver (VLANs, MGMT etc are not.)
-        It should explain the use of the add_iface/remove_iface
-        callbacks as well as the interface configuration callbacks.
-      </para>
-      <para>Things related to AP mode should be discussed there.</para>
-      <para>
-        Things related to supporting multiple interfaces should be
-        in the appropriate chapter, a BIG FAT note should be here about
-        this though and the recommendation to allow only a single
-        interface in STA mode at first!
-      </para>
-!Finclude/net/mac80211.h ieee80211_vif
-    </chapter>
-
-    <chapter id="rx-tx">
-      <title>Receive and transmit processing</title>
-      <sect1>
-        <title>what should be here</title>
-        <para>TBD</para>
-        <para>
-          This should describe the receive and transmit
-          paths in mac80211/the drivers as well as
-          transmit status handling.
-        </para>
-      </sect1>
-      <sect1>
-        <title>Frame format</title>
-!Pinclude/net/mac80211.h Frame format
-      </sect1>
-      <sect1>
-        <title>Packet alignment</title>
-!Pnet/mac80211/rx.c Packet alignment
-      </sect1>
-      <sect1>
-        <title>Calling into mac80211 from interrupts</title>
-!Pinclude/net/mac80211.h Calling mac80211 from interrupts
-      </sect1>
-      <sect1>
-        <title>functions/definitions</title>
-!Finclude/net/mac80211.h ieee80211_rx_status
-!Finclude/net/mac80211.h mac80211_rx_flags
-!Finclude/net/mac80211.h ieee80211_tx_info
-!Finclude/net/mac80211.h ieee80211_rx
-!Finclude/net/mac80211.h ieee80211_rx_irqsafe
-!Finclude/net/mac80211.h ieee80211_tx_status
-!Finclude/net/mac80211.h ieee80211_tx_status_irqsafe
-!Finclude/net/mac80211.h ieee80211_rts_get
-!Finclude/net/mac80211.h ieee80211_rts_duration
-!Finclude/net/mac80211.h ieee80211_ctstoself_get
-!Finclude/net/mac80211.h ieee80211_ctstoself_duration
-!Finclude/net/mac80211.h ieee80211_generic_frame_duration
-!Finclude/net/mac80211.h ieee80211_wake_queue
-!Finclude/net/mac80211.h ieee80211_stop_queue
-!Finclude/net/mac80211.h ieee80211_wake_queues
-!Finclude/net/mac80211.h ieee80211_stop_queues
-      </sect1>
-    </chapter>
-
-    <chapter id="filters">
-      <title>Frame filtering</title>
-!Pinclude/net/mac80211.h Frame filtering
-!Finclude/net/mac80211.h ieee80211_filter_flags
-    </chapter>
-  </part>
-
-  <part id="advanced">
-    <title>Advanced driver interface</title>
-    <partintro>
-      <para>
-       Information contained within this part of the book is
-       of interest only for advanced interaction of mac80211
-       with drivers to exploit more hardware capabilities and
-       improve performance.
-      </para>
-    </partintro>
-
-    <chapter id="hardware-crypto-offload">
-      <title>Hardware crypto acceleration</title>
-!Pinclude/net/mac80211.h Hardware crypto acceleration
-<!-- intentionally multiple !F lines to get proper order -->
-!Finclude/net/mac80211.h set_key_cmd
-!Finclude/net/mac80211.h ieee80211_key_conf
-!Finclude/net/mac80211.h ieee80211_key_alg
-!Finclude/net/mac80211.h ieee80211_key_flags
-    </chapter>
-
-    <chapter id="powersave">
-      <title>Powersave support</title>
-!Pinclude/net/mac80211.h Powersave support
-    </chapter>
-
-    <chapter id="beacon-filter">
-      <title>Beacon filter support</title>
-!Pinclude/net/mac80211.h Beacon filter support
-!Finclude/net/mac80211.h ieee80211_beacon_loss
-    </chapter>
-
-    <chapter id="qos">
-      <title>Multiple queues and QoS support</title>
-      <para>TBD</para>
-!Finclude/net/mac80211.h ieee80211_tx_queue_params
-    </chapter>
-
-    <chapter id="AP">
-      <title>Access point mode support</title>
-      <para>TBD</para>
-      <para>Some parts of the if_conf should be discussed here instead</para>
-      <para>
-        Insert notes about VLAN interfaces with hw crypto here or
-        in the hw crypto chapter.
-      </para>
-!Finclude/net/mac80211.h ieee80211_get_buffered_bc
-!Finclude/net/mac80211.h ieee80211_beacon_get
-    </chapter>
-
-    <chapter id="multi-iface">
-      <title>Supporting multiple virtual interfaces</title>
-      <para>TBD</para>
-      <para>
-        Note: WDS with identical MAC address should almost always be OK
-      </para>
-      <para>
-        Insert notes about having multiple virtual interfaces with
-        different MAC addresses here, note which configurations are
-        supported by mac80211, add notes about supporting hw crypto
-        with it.
-      </para>
-    </chapter>
-
-    <chapter id="hardware-scan-offload">
-      <title>Hardware scan offload</title>
-      <para>TBD</para>
-!Finclude/net/mac80211.h ieee80211_scan_completed
-    </chapter>
-  </part>
-
-  <part id="rate-control">
-    <title>Rate control interface</title>
-    <partintro>
-      <para>TBD</para>
-      <para>
-       This part of the book describes the rate control algorithm
-       interface and how it relates to mac80211 and drivers.
-      </para>
-    </partintro>
-    <chapter id="dummy">
-      <title>dummy chapter</title>
-      <para>TBD</para>
-    </chapter>
-  </part>
-
-  <part id="internal">
-    <title>Internals</title>
-    <partintro>
-      <para>TBD</para>
-      <para>
-       This part of the book describes mac80211 internals.
-      </para>
-    </partintro>
-
-    <chapter id="key-handling">
-      <title>Key handling</title>
-      <sect1>
-        <title>Key handling basics</title>
-!Pnet/mac80211/key.c Key handling basics
-      </sect1>
-      <sect1>
-        <title>MORE TBD</title>
-        <para>TBD</para>
-      </sect1>
-    </chapter>
-
-    <chapter id="rx-processing">
-      <title>Receive processing</title>
-      <para>TBD</para>
-    </chapter>
-
-    <chapter id="tx-processing">
-      <title>Transmit processing</title>
-      <para>TBD</para>
-    </chapter>
-
-    <chapter id="sta-info">
-      <title>Station info handling</title>
-      <sect1>
-        <title>Programming information</title>
-!Fnet/mac80211/sta_info.h sta_info
-!Fnet/mac80211/sta_info.h ieee80211_sta_info_flags
-      </sect1>
-      <sect1>
-        <title>STA information lifetime rules</title>
-!Pnet/mac80211/sta_info.c STA information lifetime rules
-      </sect1>
-    </chapter>
-
-    <chapter id="synchronisation">
-      <title>Synchronisation</title>
-      <para>TBD</para>
-      <para>Locking, lots of RCU</para>
-    </chapter>
-  </part>
-</book>
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 5e2bc4ab897a..9961f1564d22 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -536,3 +536,12 @@ Who:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 
 ----------------------------
 
+What:	iwlwifi disable_hw_scan module parameters
+When:	2.6.40
+Why:	Hareware scan is the prefer method for iwlwifi devices for
+	scanning operation. Remove software scan support for all the
+	iwlwifi devices.
+
+Who:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
+
+----------------------------
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index d2b62b71b617..5dc638791d97 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -765,6 +765,14 @@ xmit_hash_policy
 	does not exist, and the layer2 policy is the only policy.  The
 	layer2+3 value was added for bonding version 3.2.2.
 
+resend_igmp
+
+	Specifies the number of IGMP membership reports to be issued after
+	a failover event. One membership report is issued immediately after
+	the failover, subsequent packets are sent in each 200ms interval.
+
+	The valid range is 0 - 255; the default value is 1. This option
+	was added for bonding version 3.7.0.
 
 3. Configuring Bonding Devices
 ==============================
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index cd79735013f9..5b04b67ddca2 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -22,6 +22,7 @@ This file contains
       4.1.2 RAW socket option CAN_RAW_ERR_FILTER
       4.1.3 RAW socket option CAN_RAW_LOOPBACK
       4.1.4 RAW socket option CAN_RAW_RECV_OWN_MSGS
+      4.1.5 RAW socket returned message flags
     4.2 Broadcast Manager protocol sockets (SOCK_DGRAM)
     4.3 connected transport protocols (SOCK_SEQPACKET)
     4.4 unconnected transport protocols (SOCK_DGRAM)
@@ -471,6 +472,17 @@ solution for a couple of reasons:
     setsockopt(s, SOL_CAN_RAW, CAN_RAW_RECV_OWN_MSGS,
                &recv_own_msgs, sizeof(recv_own_msgs));
 
+  4.1.5 RAW socket returned message flags
+
+  When using recvmsg() call, the msg->msg_flags may contain following flags:
+
+    MSG_DONTROUTE: set when the received frame was created on the local host.
+
+    MSG_CONFIRM: set when the frame was sent via the socket it is received on.
+      This flag can be interpreted as a 'transmission confirmation' when the
+      CAN driver supports the echo of frames on driver level, see 3.2 and 6.2.
+      In order to receive such messages, CAN_RAW_RECV_OWN_MSGS must be set.
+
   4.2 Broadcast Manager protocol sockets (SOCK_DGRAM)
   4.3 connected transport protocols (SOCK_SEQPACKET)
   4.4 unconnected transport protocols (SOCK_DGRAM)
diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt
index a62fdf7a6bff..271d524a4c8d 100644
--- a/Documentation/networking/dccp.txt
+++ b/Documentation/networking/dccp.txt
@@ -1,18 +1,20 @@
 DCCP protocol
-============
+=============
 
 
 Contents
 ========
-
 - Introduction
 - Missing features
 - Socket options
+- Sysctl variables
+- IOCTLs
+- Other tunables
 - Notes
 
+
 Introduction
 ============
-
 Datagram Congestion Control Protocol (DCCP) is an unreliable, connection
 oriented protocol designed to solve issues present in UDP and TCP, particularly
 for real-time and multimedia (streaming) traffic.
@@ -29,9 +31,9 @@ It has a base protocol and pluggable congestion control IDs (CCIDs).
 DCCP is a Proposed Standard (RFC 2026), and the homepage for DCCP as a protocol
 is at http://www.ietf.org/html.charters/dccp-charter.html
 
+
 Missing features
 ================
-
 The Linux DCCP implementation does not currently support all the features that are
 specified in RFCs 4340...42.
 
@@ -45,7 +47,6 @@ http://linux-net.osdl.org/index.php/DCCP_Testing#Experimental_DCCP_source_tree
 
 Socket options
 ==============
-
 DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of
 service codes (RFC 4340, sec. 8.1.2); if this socket option is not set,
 the socket will fall back to 0 (which means that no meaningful service code
@@ -112,6 +113,7 @@ DCCP_SOCKOPT_CCID_TX_INFO
 On unidirectional connections it is useful to close the unused half-connection
 via shutdown (SHUT_WR or SHUT_RD): this will reduce per-packet processing costs.
 
+
 Sysctl variables
 ================
 Several DCCP default parameters can be managed by the following sysctls
@@ -155,15 +157,30 @@ sync_ratelimit = 125 ms
 	sequence-invalid packets on the same socket (RFC 4340, 7.5.4). The unit
 	of this parameter is milliseconds; a value of 0 disables rate-limiting.
 
+
 IOCTLS
 ======
 FIONREAD
 	Works as in udp(7): returns in the `int' argument pointer the size of
 	the next pending datagram in bytes, or 0 when no datagram is pending.
 
+
+Other tunables
+==============
+Per-route rto_min support
+	CCID-2 supports the RTAX_RTO_MIN per-route setting for the minimum value
+	of the RTO timer. This setting can be modified via the 'rto_min' option
+	of iproute2; for example:
+		> ip route change 10.0.0.0/24   rto_min 250j dev wlan0
+		> ip route add    10.0.0.254/32 rto_min 800j dev wlan0
+		> ip route show dev wlan0
+	CCID-3 also supports the rto_min setting: it is used to define the lower
+	bound for the expiry of the nofeedback timer. This can be useful on LANs
+	with very low RTTs (e.g., loopback, Gbit ethernet).
+
+
 Notes
 =====
-
 DCCP does not travel through NAT successfully at present on many boxes. This is
 because the checksum covers the pseudo-header as per TCP and UDP. Linux NAT
 support for DCCP has been added.
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index f350c69b2bb4..c7165f4cb792 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1014,6 +1014,12 @@ conf/interface/*:
 accept_ra - BOOLEAN
 	Accept Router Advertisements; autoconfigure using them.
 
+	Possible values are:
+		0 Do not accept Router Advertisements.
+		1 Accept Router Advertisements if forwarding is disabled.
+		2 Overrule forwarding behaviour. Accept Router Advertisements
+		  even if forwarding is enabled.
+
 	Functional default: enabled if local forwarding is disabled.
 			    disabled if local forwarding is enabled.
 
@@ -1075,7 +1081,12 @@ forwarding - BOOLEAN
 	Note: It is recommended to have the same setting on all
 	interfaces; mixed router/host scenarios are rather uncommon.
 
-	FALSE:
+	Possible values are:
+		0 Forwarding disabled
+		1 Forwarding enabled
+		2 Forwarding enabled (Hybrid Mode)
+
+	FALSE (0):
 
 	By default, Host behaviour is assumed.  This means:
 
@@ -1085,18 +1096,24 @@ forwarding - BOOLEAN
 	   Advertisements (and do autoconfiguration).
 	4. If accept_redirects is TRUE (default), accept Redirects.
 
-	TRUE:
+	TRUE (1):
 
 	If local forwarding is enabled, Router behaviour is assumed.
 	This means exactly the reverse from the above:
 
 	1. IsRouter flag is set in Neighbour Advertisements.
 	2. Router Solicitations are not sent.
-	3. Router Advertisements are ignored.
+	3. Router Advertisements are ignored unless accept_ra is 2.
 	4. Redirects are ignored.
 
-	Default: FALSE if global forwarding is disabled (default),
-		 otherwise TRUE.
+	TRUE (2):
+
+	Hybrid mode. Same behaviour as TRUE, except for:
+
+	2. Router Solicitations are being sent when necessary.
+
+	Default: 0 (disabled) if global forwarding is disabled (default),
+		 otherwise 1 (enabled).
 
 hop_limit - INTEGER
 	Default Hop Limit to set.
diff --git a/Documentation/networking/phonet.txt b/Documentation/networking/phonet.txt
index 6e8ce09f9c73..24ad2adba6e5 100644
--- a/Documentation/networking/phonet.txt
+++ b/Documentation/networking/phonet.txt
@@ -112,6 +112,22 @@ However, connect() and getpeername() are not supported, as they did
 not seem useful with Phonet usages (could be added easily).
 
 
+Resource subscription
+---------------------
+
+A Phonet datagram socket can be subscribed to any number of 8-bits
+Phonet resources, as follow:
+
+  uint32_t res = 0xXX;
+  ioctl(fd, SIOCPNADDRESOURCE, &res);
+
+Subscription is similarly cancelled using the SIOCPNDELRESOURCE I/O
+control request, or when the socket is closed.
+
+Note that no more than one socket can be subcribed to any given
+resource at a time. If not, ioctl() will return EBUSY.
+
+
 Phonet Pipe protocol
 --------------------
 
@@ -166,6 +182,46 @@ The pipe protocol provides two socket options at the SOL_PNPIPE level:
     or zero if encapsulation is off.
 
 
+Phonet Pipe-controller Implementation
+-------------------------------------
+
+Phonet Pipe-controller is enabled by selecting the CONFIG_PHONET_PIPECTRLR Kconfig
+option. It is useful when communicating with those Nokia Modems which do not
+implement Pipe controller in them e.g. Nokia Slim Modem used in ST-Ericsson
+U8500 platform.
+
+The implementation is based on the Data Connection Establishment Sequence
+depicted in 'Nokia Wireless Modem API - Wireless_modem_user_guide.pdf'
+document.
+
+It allows a phonet sequenced socket (host-pep) to initiate a Pipe connection
+between itself and a remote pipe-end point (e.g. modem).
+
+The implementation adds socket options at SOL_PNPIPE level:
+
+ PNPIPE_PIPE_HANDLE
+	It accepts an integer argument for setting value of pipe handle.
+
+  PNPIPE_ENABLE accepts one integer value (int). If set to zero, the pipe
+    is disabled. If the value is non-zero, the pipe is enabled. If the pipe
+    is not (yet) connected, ENOTCONN is error is returned.
+
+The implementation also adds socket 'connect'. On calling the 'connect', pipe
+will be created between the source socket and the destination, and the pipe
+state will be set to PIPE_DISABLED.
+
+After a pipe has been created and enabled successfully, the Pipe data can be
+exchanged between the host-pep and remote-pep (modem).
+
+User-space would typically follow below sequence with Pipe controller:-
+-socket
+-bind
+-setsockopt for PNPIPE_PIPE_HANDLE
+-connect
+-setsockopt for PNPIPE_ENCAP_IP
+-setsockopt for PNPIPE_ENABLE
+
+
 Authors
 -------
 
diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt
index e8c8f4f06c67..98097d8cb910 100644
--- a/Documentation/networking/timestamping.txt
+++ b/Documentation/networking/timestamping.txt
@@ -172,15 +172,19 @@ struct skb_shared_hwtstamps {
 };
 
 Time stamps for outgoing packets are to be generated as follows:
-- In hard_start_xmit(), check if skb_tx(skb)->hardware is set no-zero.
-  If yes, then the driver is expected to do hardware time stamping.
+- In hard_start_xmit(), check if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
+  is set no-zero. If yes, then the driver is expected to do hardware time
+  stamping.
 - If this is possible for the skb and requested, then declare
-  that the driver is doing the time stamping by setting the field
-  skb_tx(skb)->in_progress non-zero. You might want to keep a pointer
-  to the associated skb for the next step and not free the skb. A driver
-  not supporting hardware time stamping doesn't do that. A driver must
-  never touch sk_buff::tstamp! It is used to store software generated
-  time stamps by the network subsystem.
+  that the driver is doing the time stamping by setting the flag
+  SKBTX_IN_PROGRESS in skb_shinfo(skb)->tx_flags , e.g. with
+
+      skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+
+  You might want to keep a pointer to the associated skb for the next step
+  and not free the skb. A driver not supporting hardware time stamping doesn't
+  do that. A driver must never touch sk_buff::tstamp! It is used to store
+  software generated time stamps by the network subsystem.
 - As soon as the driver has sent the packet and/or obtained a
   hardware time stamp for it, it passes the time stamp back by
   calling skb_hwtstamp_tx() with the original skb, the raw
@@ -191,6 +195,6 @@ Time stamps for outgoing packets are to be generated as follows:
   this would occur at a later time in the processing pipeline than other
   software time stamping and therefore could lead to unexpected deltas
   between time stamps.
-- If the driver did not call set skb_tx(skb)->in_progress, then
+- If the driver did not set the SKBTX_IN_PROGRESS flag (see above), then
   dev_hard_start_xmit() checks whether software time stamping
   is wanted as fallback and potentially generates the time stamp.