summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-05-24 10:34:29 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-05-24 10:34:29 -0700
commit2c01e7bc46f10e9190818437e564f7e0db875ae9 (patch)
tree8b06c85d69754f7df27f7fb42520f6e2ceaea907 /Documentation
parentab11ca34eea8fda7a1a9302d86f6ef6108ffd68f (diff)
parente644dae645e167d154c0526358940986682a72b0 (diff)
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer updates from Dmitry Torokhov: - a bunch of new drivers (DA9052/53 touchscreenn controller, Synaptics Navpoint, LM8333 keypads, Wacom I2C touhscreen); - updates to existing touchpad drivers (ALPS, Sntelic); - Wacom driver now supports Intuos5; - device-tree bindings in numerous drivers; - other cleanups and fixes. Fix annoying conflict in drivers/input/tablet/wacom_wac.c that I think implies that the input layer device naming is broken, but let's see. I brough it up with Dmitry. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: matrix-keymap - fix building keymaps Input: spear-keyboard - document DT bindings Input: spear-keyboard - add device tree bindings Input: matrix-keymap - wire up device tree support Input: matrix-keymap - uninline and prepare for device tree support Input: adp5588 - add support for gpio names Input: omap-keypad - dynamically handle register offsets Input: synaptics - fix compile warning MAINTAINERS: adjust input-related patterns Input: ALPS - switch to using input_mt_report_finger_count Input: ALPS - add semi-MT support for v4 protocol Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver Input: atmel_mxt_ts - dump each message on just 1 line Input: atmel_mxt_ts - do not read extra (checksum) byte Input: atmel_mxt_ts - verify object size in mxt_write_object Input: atmel_mxt_ts - only allow root to update firmware Input: atmel_mxt_ts - use CONFIG_PM_SLEEP Input: sentelic - report device's production serial number Input: tl6040-vibra - Device Tree support Input: evdev - properly handle read/write with count 0 ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-driver-wacom15
-rw-r--r--Documentation/devicetree/bindings/input/spear-keyboard.txt20
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt16
-rw-r--r--Documentation/devicetree/bindings/input/twl6040-vibra.txt37
4 files changed, 81 insertions, 7 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom
index 56c54558c8a4..8d55a83d6921 100644
--- a/Documentation/ABI/testing/sysfs-driver-wacom
+++ b/Documentation/ABI/testing/sysfs-driver-wacom
@@ -23,9 +23,10 @@ Contact: linux-input@vger.kernel.org
Description:
Attribute group for control of the status LEDs and the OLEDs.
This attribute group is only available for Intuos 4 M, L,
- and XL (with LEDs and OLEDs) and Cintiq 21UX2 and Cintiq 24HD
- (LEDs only). Therefore its presence implicitly signifies the
- presence of said LEDs and OLEDs on the tablet device.
+ and XL (with LEDs and OLEDs), Intuos 5 (LEDs only), and Cintiq
+ 21UX2 and Cintiq 24HD (LEDs only). Therefore its presence
+ implicitly signifies the presence of said LEDs and OLEDs on the
+ tablet device.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance
Date: August 2011
@@ -48,10 +49,10 @@ What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led0
Date: August 2011
Contact: linux-input@vger.kernel.org
Description:
- Writing to this file sets which one of the four (for Intuos 4)
- or of the right four (for Cintiq 21UX2 and Cintiq 24HD) status
- LEDs is active (0..3). The other three LEDs on the same side are
- always inactive.
+ Writing to this file sets which one of the four (for Intuos 4
+ and Intuos 5) or of the right four (for Cintiq 21UX2 and Cintiq
+ 24HD) status LEDs is active (0..3). The other three LEDs on the
+ same side are always inactive.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select
Date: September 2011
diff --git a/Documentation/devicetree/bindings/input/spear-keyboard.txt b/Documentation/devicetree/bindings/input/spear-keyboard.txt
new file mode 100644
index 000000000000..4a846d26da23
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/spear-keyboard.txt
@@ -0,0 +1,20 @@
+* SPEAr keyboard controller
+
+Required properties:
+- compatible: "st,spear300-kbd"
+
+Optional properties, in addition to those specified by the shared
+matrix-keyboard bindings:
+- autorepeat: bool: enables key autorepeat
+- st,mode: keyboard mode: 0 - 9x9, 1 - 6x6, 2 - 2x2
+
+Example:
+
+kbd@fc400000 {
+ compatible = "st,spear300-kbd";
+ reg = <0xfc400000 0x100>;
+ linux,keymap = < 0x00030012
+ 0x0102003a >;
+ autorepeat;
+ st,mode = <0>;
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt
new file mode 100644
index 000000000000..41cbf4b7a670
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt
@@ -0,0 +1,16 @@
+* NXP LPC32xx SoC Touchscreen Controller (TSC)
+
+Required properties:
+- compatible: must be "nxp,lpc3220-tsc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The TSC/ADC interrupt
+
+Example:
+
+ tsc@40048000 {
+ compatible = "nxp,lpc3220-tsc";
+ reg = <0x40048000 0x1000>;
+ interrupt-parent = <&mic>;
+ interrupts = <39 0>;
+ };
diff --git a/Documentation/devicetree/bindings/input/twl6040-vibra.txt b/Documentation/devicetree/bindings/input/twl6040-vibra.txt
new file mode 100644
index 000000000000..5b1918b818fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/twl6040-vibra.txt
@@ -0,0 +1,37 @@
+Vibra driver for the twl6040 family
+
+The vibra driver is a child of the twl6040 MFD dirver.
+Documentation/devicetree/bindings/mfd/twl6040.txt
+
+Required properties:
+- compatible : Must be "ti,twl6040-vibra";
+- interrupts: 4, Vibra overcurrent interrupt
+- vddvibl-supply: Regulator supplying the left vibra motor
+- vddvibr-supply: Regulator supplying the right vibra motor
+- vibldrv_res: Board specific left driver resistance
+- vibrdrv_res: Board specific right driver resistance
+- viblmotor_res: Board specific left motor resistance
+- vibrmotor_res: Board specific right motor resistance
+
+Optional properties:
+- vddvibl_uV: If the vddvibl default voltage need to be changed
+- vddvibr_uV: If the vddvibr default voltage need to be changed
+
+Example:
+/*
+ * 8-channel high quality low-power audio codec
+ * http://www.ti.com/lit/ds/symlink/twl6040.pdf
+ */
+twl6040: twl6040@4b {
+ ...
+ twl6040_vibra: twl6040@1 {
+ compatible = "ti,twl6040-vibra";
+ interrupts = <4>;
+ vddvibl-supply = <&vbat>;
+ vddvibr-supply = <&vbat>;
+ vibldrv_res = <8>;
+ vibrdrv_res = <3>;
+ viblmotor_res = <10>;
+ vibrmotor_res = <10>;
+ };
+};