diff options
| author | Masanari Iida <standby24x7@gmail.com> | 2012-03-04 23:16:11 +0900 |
|---|---|---|
| committer | Jiri Kosina <jkosina@suse.cz> | 2012-03-07 16:08:24 +0100 |
| commit | 40e47125e6c5110383b0176d7b9d530f2936b1ae (patch) | |
| tree | 9653ac1f586cbfe36286c2d987c9330078eb37ad /Documentation | |
| parent | 4e70daaf05a181b6968e29e72e9f1c16a183e92c (diff) | |
Documentation: Fix multiple typo in Documentation
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Diffstat (limited to 'Documentation')
42 files changed, 77 insertions, 77 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-class-rfkill b/Documentation/ABI/obsolete/sysfs-class-rfkill index 4201d5b05515..ff60ad9eca4c 100644 --- a/Documentation/ABI/obsolete/sysfs-class-rfkill +++ b/Documentation/ABI/obsolete/sysfs-class-rfkill @@ -7,7 +7,7 @@ Date: 09-Jul-2007 KernelVersion v2.6.22 Contact: linux-wireless@vger.kernel.org Description: Current state of the transmitter. - This file is deprecated and sheduled to be removed in 2014, + This file is deprecated and scheduled to be removed in 2014, because its not possible to express the 'soft and hard block' state of the rfkill driver. Values: A numeric value. diff --git a/Documentation/ABI/stable/sysfs-module b/Documentation/ABI/stable/sysfs-module index 75be43118335..a0dd21c6db59 100644 --- a/Documentation/ABI/stable/sysfs-module +++ b/Documentation/ABI/stable/sysfs-module @@ -6,7 +6,7 @@ Description: The name of the module that is in the kernel. This module name will show up either if the module is built directly into the kernel, or if it is loaded as a - dyanmic module. + dynamic module. /sys/module/MODULENAME/parameters This directory contains individual files that are each diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 880c95607f09..31df1aa00710 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -945,7 +945,7 @@ and other resources, etc. <listitem> <para> - !BSY && ERR after CDB tranfer starts but before the + !BSY && ERR after CDB transfer starts but before the last byte of CDB is transferred. ATA/ATAPI standard states that "The device shall not terminate the PACKET command with an error before the last byte of the command packet has @@ -1050,7 +1050,7 @@ and other resources, etc. to complete a command. Combined with the fact that MWDMA and PIO transfer errors aren't allowed to use ICRC bit up to ATA/ATAPI-7, it seems to imply that ABRT bit alone could - indicate tranfer errors. + indicate transfer errors. </para> <para> However, ATA/ATAPI-8 draft revision 1f removes the part diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index c736380b4647..a2485b3ff3d2 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -444,7 +444,7 @@ linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR24</constant></link></para></entr <entry><para><link linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR32</constant></link><footnote> <para>Presumably all V4L RGB formats are -little-endian, although some drivers might interpret them according to machine endianess. V4L2 defines little-endian, big-endian and red/blue +little-endian, although some drivers might interpret them according to machine endianness. V4L2 defines little-endian, big-endian and red/blue swapped variants. For details see <xref linkend="pixfmt-rgb" />.</para> </footnote></para></entry> </row> @@ -823,7 +823,7 @@ standard); 35468950 Hz PAL and SECAM (625-line standards)</entry> <row> <entry>sample_format</entry> <entry>V4L2_PIX_FMT_GREY. The last four bytes (a -machine endianess integer) contain a frame counter.</entry> +machine endianness integer) contain a frame counter.</entry> </row> <row> <entry>start[]</entry> diff --git a/Documentation/arm/kernel_user_helpers.txt b/Documentation/arm/kernel_user_helpers.txt index a17df9f91d16..5673594717cf 100644 --- a/Documentation/arm/kernel_user_helpers.txt +++ b/Documentation/arm/kernel_user_helpers.txt @@ -25,7 +25,7 @@ inline (either in the code emitted directly by the compiler, or part of the implementation of a library call) when optimizing for a recent enough processor that has the necessary native support, but only if resulting binaries are already to be incompatible with earlier ARM processors due to -useage of similar native instructions for other things. In other words +usage of similar native instructions for other things. In other words don't make binaries unable to run on earlier processors just for the sake of not using these kernel helpers if your compiled code is not going to use new instructions for other purpose. diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt index 84f0a15fc210..b4b1fb3a83f0 100644 --- a/Documentation/cgroups/blkio-controller.txt +++ b/Documentation/cgroups/blkio-controller.txt @@ -94,11 +94,11 @@ Throttling/Upper Limit policy Hierarchical Cgroups ==================== -- Currently none of the IO control policy supports hierarhical groups. But - cgroup interface does allow creation of hierarhical cgroups and internally +- Currently none of the IO control policy supports hierarchical groups. But + cgroup interface does allow creation of hierarchical cgroups and internally IO policies treat them as flat hierarchy. - So this patch will allow creation of cgroup hierarhcy but at the backend + So this patch will allow creation of cgroup hierarchcy but at the backend everything will be treated as flat. So if somebody created a hierarchy like as follows. @@ -266,7 +266,7 @@ Proportional weight policy files - blkio.idle_time - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y. This is the amount of time spent by the IO scheduler idling for a - given cgroup in anticipation of a better request than the exising ones + given cgroup in anticipation of a better request than the existing ones from other queues/cgroups. This is in nanoseconds. If this is read when the cgroup is in an idling state, the stat will only report the idle_time accumulated till the last idle period and will not include @@ -283,34 +283,34 @@ Throttling/Upper limit policy files ----------------------------------- - blkio.throttle.read_bps_device - Specifies upper limit on READ rate from the device. IO rate is - specified in bytes per second. Rules are per deivce. Following is + specified in bytes per second. Rules are per device. Following is the format. echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device - blkio.throttle.write_bps_device - Specifies upper limit on WRITE rate to the device. IO rate is - specified in bytes per second. Rules are per deivce. Following is + specified in bytes per second. Rules are per device. Following is the format. echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device - blkio.throttle.read_iops_device - Specifies upper limit on READ rate from the device. IO rate is - specified in IO per second. Rules are per deivce. Following is + specified in IO per second. Rules are per device. Following is the format. echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device - blkio.throttle.write_iops_device - Specifies upper limit on WRITE rate to the device. IO rate is - specified in io per second. Rules are per deivce. Following is + specified in io per second. Rules are per device. Following is the format. echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device Note: If both BW and IOPS rules are specified for a device, then IO is - subjectd to both the constraints. + subjected to both the constraints. - blkio.throttle.io_serviced - Number of IOs (bio) completed to/from the disk by the group (as diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt index 2a8c11331d2d..946c73342cde 100644 --- a/Documentation/device-mapper/dm-raid.txt +++ b/Documentation/device-mapper/dm-raid.txt @@ -28,7 +28,7 @@ The target is named "raid" and it accepts the following parameters: raid6_nc RAID6 N continue - rotating parity N (right-to-left) with data continuation - Refererence: Chapter 4 of + Reference: Chapter 4 of http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf <#raid_params>: The number of parameters that follow. diff --git a/Documentation/device-mapper/persistent-data.txt b/Documentation/device-mapper/persistent-data.txt index 0e5df9b04ad2..a333bcb3a6c2 100644 --- a/Documentation/device-mapper/persistent-data.txt +++ b/Documentation/device-mapper/persistent-data.txt @@ -3,7 +3,7 @@ Introduction The more-sophisticated device-mapper targets require complex metadata that is managed in kernel. In late 2010 we were seeing that various -different targets were rolling their own data strutures, for example: +different targets were rolling their own data structures, for example: - Mikulas Patocka's multisnap implementation - Heinz Mauelshagen's thin provisioning target diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index dbdab40ed3a6..edc618a8aab2 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -5,7 +5,7 @@ IPs present in the SoC. On top of that an omap_device is created to extend the platform_device capabilities and to allow binding with one or several hwmods. The hwmods will contain all the information to build the device: -adresse range, irq lines, dma lines, interconnect, PRCM register, +address range, irq lines, dma lines, interconnect, PRCM register, clock domain, input clocks. For the moment just point to the existing hwmod, the next step will be to move data from hwmod to device-tree representation. diff --git a/Documentation/devicetree/bindings/arm/sirf.txt b/Documentation/devicetree/bindings/arm/sirf.txt index 6b07f65b32de..1881e1c6dda5 100644 --- a/Documentation/devicetree/bindings/arm/sirf.txt +++ b/Documentation/devicetree/bindings/arm/sirf.txt @@ -1,3 +1,3 @@ -prima2 "cb" evalutation board +prima2 "cb" evaluation board Required root node properties: - compatible = "sirf,prima2-cb", "sirf,prima2"; diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 7c1329de0596..da0bfeb4253d 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -169,7 +169,7 @@ it with special cases. b) Entry with a flattened device-tree block. Firmware loads the physical address of the flattened device tree block (dtb) into r2, - r1 is not used, but it is considered good practise to use a valid + r1 is not used, but it is considered good practice to use a valid machine number as described in Documentation/arm/Booting. r0 : 0 diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt index bbe6cb3d1856..879b6e31e2da 100644 --- a/Documentation/dmaengine.txt +++ b/Documentation/dmaengine.txt @@ -63,7 +63,7 @@ The slave DMA usage consists of following steps: struct dma_slave_config *config) Please see the dma_slave_config structure definition in dmaengine.h - for a detailed explaination of the struct members. Please note + for a detailed explanation of the struct members. Please note that the 'direction' member will be going away as it duplicates the direction given in the prepare call. diff --git a/Documentation/fb/matroxfb.txt b/Documentation/fb/matroxfb.txt index e5ce8a1a978b..b95f5bb522f2 100644 --- a/Documentation/fb/matroxfb.txt +++ b/Documentation/fb/matroxfb.txt @@ -177,8 +177,8 @@ sgram - tells to driver that you have Gxx0 with SGRAM memory. It has no effect without `init'. sdram - tells to driver that you have Gxx0 with SDRAM memory. It is a default. -inv24 - change timings parameters for 24bpp modes on Millenium and - Millenium II. Specify this if you see strange color shadows around +inv24 - change timings parameters for 24bpp modes on Millennium and + Millennium II. Specify this if you see strange color shadows around characters. noinv24 - use standard timings. It is the default. inverse - invert colors on screen (for LCD displays) @@ -204,9 +204,9 @@ grayscale - enable grayscale summing. It works in PSEUDOCOLOR modes (text, can paint colors. nograyscale - disable grayscale summing. It is default. cross4MB - enables that pixel line can cross 4MB boundary. It is default for - non-Millenium. + non-Millennium. nocross4MB - pixel line must not cross 4MB boundary. It is default for - Millenium I or II, because of these devices have hardware + Millennium I or II, because of these devices have hardware limitations which do not allow this. But this option is incompatible with some (if not all yet released) versions of XF86_FBDev. diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 10ec4639f152..8c10bf375c73 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -308,7 +308,7 @@ min_batch_time=usec This parameter sets the commit time (as fast disks, at the cost of increasing latency. journal_ioprio=prio The I/O priority (from 0 to 7, where 0 is the - highest priorty) which should be used for I/O + highest priority) which should be used for I/O operations submitted by kjournald2 during a commit operation. This defaults to 3, which is a slightly higher priority than the default I/O @@ -343,7 +343,7 @@ noinit_itable Do not initialize any uninitialized inode table init_itable=n The lazy itable init code will wait n times the number of milliseconds it took to zero out the previous block group's inode table. This - minimizes the impact on the systme performance + minimizes the impact on the system performance while file system's inode table is being initialized. discard Controls whether ext4 should issue discard/TRIM diff --git a/Documentation/filesystems/gfs2-uevents.txt b/Documentation/filesystems/gfs2-uevents.txt index d81889669293..19a19ebebc34 100644 --- a/Documentation/filesystems/gfs2-uevents.txt +++ b/Documentation/filesystems/gfs2-uevents.txt @@ -62,7 +62,7 @@ be fixed. The REMOVE uevent is generated at the end of an unsuccessful mount or at the end of a umount of the filesystem. All REMOVE uevents will -have been preceded by at least an ADD uevent for the same fileystem, +have been preceded by at least an ADD uevent for the same filesystem, and unlike the other uevents is generated automatically by the kernel's kobject subsystem. diff --git a/Documentation/filesystems/pohmelfs/network_protocol.txt b/Documentation/filesystems/pohmelfs/network_protocol.txt index 65e03dd44823..c680b4b5353d 100644 --- a/Documentation/filesystems/pohmelfs/network_protocol.txt +++ b/Documentation/filesystems/pohmelfs/network_protocol.txt @@ -20,7 +20,7 @@ Commands can be embedded into transaction command (which in turn has own command so one can extend protocol as needed without breaking backward compatibility as long as old commands are supported. All string lengths include tail 0 byte. -All commands are transferred over the network in big-endian. CPU endianess is used at the end peers. +All commands are transferred over the network in big-endian. CPU endianness is used at the end peers. @cmd - command number, which specifies command to be processed. Following commands are used currently: diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 3d9393b845b8..e916e3d36488 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -993,7 +993,7 @@ struct dentry_operations { If the 'rcu_walk' parameter is true, then the caller is doing a pathwalk in RCU-walk mode. Sleeping is not permitted in this mode, - and the caller can be asked to leave it and call again by returing + and the caller can be asked to leave it and call again by returning -ECHILD. This function is only used if DCACHE_MANAGE_TRANSIT is set on the diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275 index ab70d96d2dfd..e5f982c845fd 100644 --- a/Documentation/hwmon/adm1275 +++ b/Documentation/hwmon/adm1275 @@ -53,7 +53,7 @@ attributes are write-only, all other attributes are read-only. in1_label "vin1" or "vout1" depending on chip variant and configuration. in1_input Measured voltage. -in1_min Minumum Voltage. +in1_min Minimum Voltage. in1_max Maximum voltage. in1_min_alarm Voltage low alarm. in1_max_alarm Voltage high alarm. diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064 index f6e8bcbfaccf..f8b478076f6d 100644 --- a/Documentation/hwmon/max16064 +++ b/Documentation/hwmon/max16064 @@ -42,9 +42,9 @@ attributes are read-only. in[1-4]_label "vout[1-4]" in[1-4]_input Measured voltage. From READ_VOUT register. -in[1-4]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[1-4]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in[1-4]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[1-4]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440 index 8ab51536a1eb..19743919ea56 100644 --- a/Documentation/hwmon/max34440 +++ b/Documentation/hwmon/max34440 @@ -48,9 +48,9 @@ attributes are read-only. in[1-6]_label "vout[1-6]". in[1-6]_input Measured voltage. From READ_VOUT register. -in[1-6]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[1-6]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-6]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in[1-6]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[1-6]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in[1-6]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-6]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688 index 71ed10a3c94e..fe849871df32 100644 --- a/Documentation/hwmon/max8688 +++ b/Documentation/hwmon/max8688 @@ -42,9 +42,9 @@ attributes are read-only. in1_label "vout1" in1_input Measured voltage. From READ_VOUT register. -in1_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in1_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in1_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in1_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. diff --git a/Documentation/hwmon/ucd9000 b/Documentation/hwmon/ucd9000 index 40ca6db50c48..0df5f276505b 100644 --- a/Documentation/hwmon/ucd9000 +++ b/Documentation/hwmon/ucd9000 @@ -70,9 +70,9 @@ attributes are read-only. in[1-12]_label "vout[1-12]". in[1-12]_input Measured voltage. From READ_VOUT register. -in[1-12]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[1-12]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-12]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in[1-12]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[1-12]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in[1-12]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-12]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. @@ -82,7 +82,7 @@ in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. curr[1-12]_label "iout[1-12]". curr[1-12]_input Measured current. From READ_IOUT register. curr[1-12]_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr[1-12]_lcrit Critical minumum output current. From IOUT_UC_FAULT_LIMIT +curr[1-12]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT register. curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. curr[1-12]_max_alarm Current high alarm. From IOUT_OC_WARNING status. diff --git a/Documentation/hwmon/ucd9200 b/Documentation/hwmon/ucd9200 index 3c58607f72fe..fd7d07b1908a 100644 --- a/Documentation/hwmon/ucd9200 +++ b/Documentation/hwmon/ucd9200 @@ -54,9 +54,9 @@ attributes are read-only. in1_label "vin". in1_input Measured voltage. From READ_VIN register. -in1_min Minumum Voltage. From VIN_UV_WARN_LIMIT register. +in1_min Minimum Voltage. From VIN_UV_WARN_LIMIT register. in1_max Maximum voltage. From VIN_OV_WARN_LIMIT register. -in1_lcrit Critical minumum Voltage. VIN_UV_FAULT_LIMIT register. +in1_lcrit Critical minimum Voltage. VIN_UV_FAULT_LIMIT register. in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT register. in1_min_alarm Voltage low alarm. From VIN_UV_WARNING status. in1_max_alarm Voltage high alarm. From VIN_OV_WARNING status. @@ -65,9 +65,9 @@ in1_crit_alarm Voltage critical high alarm. From VIN_OV_FAULT status. in[2-5]_label "vout[1-4]". in[2-5]_input Measured voltage. From READ_VOUT register. -in[2-5]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[2-5]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[2-5]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in[2-5]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[2-5]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. in[2-5]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[2-5]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. @@ -80,7 +80,7 @@ curr1_input Measured current. From READ_IIN register. curr[2-5]_label "iout[1-4]". curr[2-5]_input Measured current. From READ_IOUT register. curr[2-5]_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr[2-5]_lcrit Critical minumum output current. From IOUT_UC_FAULT_LIMIT +curr[2-5]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT register. curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. curr[2-5]_max_alarm Current high alarm. From IOUT_OC_WARNING status. diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100 index 51f76a189fee..5865a2470d4a 100644 --- a/Documentation/hwmon/zl6100 +++ b/Documentation/hwmon/zl6100 @@ -108,7 +108,7 @@ in1_label "vin" in1_input Measured input voltage. in1_min Minimum input voltage. in1_max Maximum input voltage. -in1_lcrit Critical minumum input voltage. +in1_lcrit Critical minimum input voltage. in1_crit Critical maximum input voltage. in1_min_alarm Input voltage low alarm. in1_max_alarm Input voltage high alarm. @@ -117,7 +117,7 @@ in1_crit_alarm Input voltage critical high alarm. in2_label "vout1" in2_input Measured output voltage. -in2_lcrit Critical minumum output Voltage. +in2_lcrit Critical minimum output Voltage. in2_crit Critical maximum output voltage. in2_lcrit_alarm Critical output voltage critical low alarm. in2_crit_alarm Critical output voltage critical high alarm. diff --git a/Documentation/i2o/ioctl b/Documentation/i2o/ioctl index 22ca53a67e23..27c3c5493116 100644 --- a/Documentation/i2o/ioctl +++ b/Documentation/i2o/ioctl @@ -138,7 +138,7 @@ VI. Setting Parameters The return value is the size in bytes of the data written into ops->resbuf if no errors occur. If an error occurs, -1 is returned - and errno is set appropriatly: + and errno is set appropriately: EFAULT Invalid user space pointer was passed ENXIO Invalid IOP number @@ -222,7 +222,7 @@ VIII. Downloading Software RETURNS This function returns 0 no errors occur. If an error occurs, -1 - is returned and errno is set appropriatly: + is returned and errno is set appropriately: EFAULT Invalid user space pointer was passed ENXIO Invalid IOP number @@ -264,7 +264,7 @@ IX. Uploading Software RETURNS This function returns 0 if no errors occur. If an error occurs, -1 - is returned and errno is set appropriatly: + is returned and errno is set appropriately: EFAULT Invalid user space pointer was passed ENXIO Invalid IOP number @@ -301,7 +301,7 @@ X. Removing Software RETURNS This function returns 0 if no errors occur. If an error occurs, -1 - is returned and errno is set appropriatly: + is returned and errno is set appropriately: EFAULT Invalid user space pointer was passed ENXIO Invalid IOP number @@ -325,7 +325,7 @@ X. Validating Configuration RETURNS This function returns 0 if no erro occur. If an error occurs, -1 is - returned and errno is set appropriatly: + returned and errno is set appropriately: ETIMEDOUT Timeout waiting for reply message ENXIO Invalid IOP number @@ -360,7 +360,7 @@ XI. Configuration Dialog RETURNS This function returns 0 if no error occur. If an error occurs, -1 - is returned and errno is set appropriatly: + is returned and errno is set appropriately: EFAULT Invalid user space pointer was passed ENXIO Invalid IOP number diff --git a/Documentation/ide/ChangeLog.ide-cd.1994-2004 b/Documentation/ide/ChangeLog.ide-cd.1994-2004 index 190d17bfff62..4cc3ad99f39b 100644 --- a/Documentation/ide/ChangeLog.ide-cd.1994-2004 +++ b/Documentation/ide/ChangeLog.ide-cd.1994-2004 @@ -175,7 +175,7 @@ * since the .pdf version doesn't seem to work... * -- Updated the TODO list to something more current. * - * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect mechine endianess, + * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect machine endianness, * patch thanks to "Eddie C. Dost" <ecd@skynet.be> * * 4.50 Oct 19, 1998 -- New maintainers! diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index f274c28b5103..9c407f01d74f 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -131,8 +131,8 @@ number of contacts (f1 and f0 in the table below). byte 5: 0 1 ? ? ? ? f1 f0 This packet only appears after a position packet with the mt bit set, and -ususally only appears when there are two or more contacts (although -ocassionally it's seen with only a single contact). +usually only appears when there are two or more contacts (although +occassionally it's seen with only a single contact). The final v3 packet type is the trackstick packet. diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt index 8007b7ca87bf..304262bb661a 100644 --- a/Documentation/input/joystick.txt +++ b/Documentation/input/joystick.txt @@ -330,7 +330,7 @@ the USB documentation for how to setup an USB mouse. The TM DirectConnect (BSP) protocol is supported by the tmdc.c module. This includes, but is not limited to: -* ThrustMaster Millenium 3D Inceptor +* ThrustMaster Millennium 3D Interceptor * ThrustMaster 3D Rage Pad * ThrustMaster Fusion Digital Game Pad diff --git a/Documentation/ioctl/hdio.txt b/Documentation/ioctl/hdio.txt index 91a6ecbae0bb..18eb98c44ffe 100644 --- a/Documentation/ioctl/hdio.txt +++ b/Documentation/ioctl/hdio.txt @@ -596,7 +596,7 @@ HDIO_DRIVE_TASKFILE execute raw taskfile if CHS/LBA28 The association between in_flags.all and each enable - bitfield flips depending on endianess; fortunately, TASKFILE + bitfield flips depending on endianness; fortunately, TASKFILE only uses inflags.b.data bit and ignores all other bits. The end result is that, on any endian machines, it has no effect other than modifying in_flags on completion. @@ -720,7 +720,7 @@ HDIO_DRIVE_TASKFILE execute raw taskfile [6] Do not access {in|out}_flags->all except for resetting all the bits. Always access individual bit fields. ->all - value will flip depending on endianess. For the same + value will flip depending on endianness. For the same reason, do not use IDE_{TASKFILE|HOB}_STD_{OUT|IN}_FLAGS constants defined in hdreg.h. diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index 44e2649fbb29..a686f9cd69c1 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -117,7 +117,7 @@ applicable everywhere (see syntax). This attribute is only applicable to menu blocks, if the condition is false, the menu block is not displayed to the user (the symbols contained there can still be selected by other symbols, though). It is - similar to a conditional "prompt" attribude for individual menu + similar to a conditional "prompt" attribute for individual menu entries. Default value of "visible" is true. - numerical ranges: "range" <symbol> <symbol> ["if" <expr>] diff --git a/Documentation/networking/fore200e.txt b/Documentation/networking/fore200e.txt index 6e0d2a9613ec..f648eb265188 100644 --- a/Documentation/networking/fore200e.txt +++ b/Documentation/networking/fore200e.txt @@ -44,7 +44,7 @@ the 'software updates' pages. The firmware binaries are part of the various ForeThought software distributions. Notice that different versions of the PCA-200E firmware exist, depending -on the endianess of the host architecture. The driver is shipped with +on the endianness of the host architecture. The driver is shipped with both little and big endian PCA firmware images. Name and location of the new firmware images can be set at kernel diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc index c56ec99d7b2f..2f6d595f95e1 100644 --- a/Documentation/scsi/ChangeLog.lpfc +++ b/Documentation/scsi/ChangeLog.lpfc @@ -1718,7 +1718,7 @@ Changes from 20040319 to 20040326 * lpfc_els_timeout_handler() now uses system timer. * Further cleanup of #ifdef powerpc * lpfc_scsi_timeout_handler() now uses system timer. - * Replace common driver's own defines for endianess w/ Linux's + * Replace common driver's own defines for endianness w/ Linux's __BIG_ENDIAN etc. * Added #ifdef IPFC for all IPFC specific code. * lpfc_disc_retry_rptlun() now uses system timer. diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 57566bacb4c5..83f8ea8b79eb 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -510,7 +510,7 @@ i. Support for 1078 type (ppc IOP) controller, device id : 0x60 added. 3 Older Version : 00.00.02.02 i. Register 16 byte CDB capability with scsi midlayer - "Ths patch properly registers the 16 byte command length capability of the + "This patch properly registers the 16 byte command length capability of the megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas hardware supports 16 byte CDB's." diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt index 61c0531e044a..3303d218b32e 100644 --- a/Documentation/scsi/tmscsim.txt +++ b/Documentation/scsi/tmscsim.txt @@ -102,7 +102,7 @@ So take at least the following measures: ftp://student.physik.uni-dortmund.de/pub/linux/kernel/bootdisk.gz One more warning: I used to overclock my PCI bus to 41.67 MHz. My Tekram -DC390F (Sym53c875) accepted this as well as my Millenium. But the Am53C974 +DC390F (Sym53c875) accepted this as well as my Millennium. But the Am53C974 produced errors and started to corrupt my disks. So don't do that! A 37.50 MHz PCI bus works for me, though, but I don't recommend using higher clocks than the 33.33 MHz being in the PCI spec. diff --git a/Documentation/security/Smack.txt b/Documentation/security/Smack.txt index e9dab41c0fe0..d2f72ae66432 100644 --- a/Documentation/security/Smack.txt +++ b/Documentation/security/Smack.txt @@ -536,6 +536,6 @@ writing a single character to the /smack/logging file : 3 : log denied & accepted Events are logged as 'key=value' pairs, for each event you at least will get -the subjet, the object, the rights requested, the action, the kernel function +the subject, the object, the rights requested, the action, the kernel function that triggered the event, plus other pairs depending on the type of event audited. diff --git a/Documentation/security/keys-trusted-encrypted.txt b/Documentation/security/keys-trusted-encrypted.txt index c9e4855ed3d7..e105ae97a4f5 100644 --- a/Documentation/security/keys-trusted-encrypted.txt +++ b/Documentation/security/keys-trusted-encrypted.txt @@ -1,7 +1,7 @@ Trusted and Encrypted Keys Trusted and Encrypted Keys are two new key types added to the existing kernel -key ring service. Both of these new types are variable length symmetic keys, +key ring service. Both of these new types are variable length symmetric keys, and in both cases all keys are created in the kernel, and user space sees, stores, and loads only encrypted blobs. Trusted Keys require the availability of a Trusted Platform Module (TPM) chip for greater security, while Encrypted diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt index 4d75931d2d79..fcbe7a703405 100644 --- a/Documentation/security/keys.txt +++ b/Documentation/security/keys.txt @@ -668,7 +668,7 @@ The keyctl syscall functions are: If the kernel calls back to userspace to complete the instantiation of a key, userspace should use this call mark the key as negative before the - invoked process returns if it is unable to fulfil the request. + invoked process returns if it is unable to fulfill the request. The process must have write access on the key to be able to instantiate it, and the key must be uninstantiated. diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 936699e4f04b..12e3a0fb9bec 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1588,7 +1588,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module supports autoprobe a chip. - Note: the driver may have problems regarding endianess. + Note: the driver may have problems regarding endianness. The power-management is supported. diff --git a/Documentation/video4linux/uvcvideo.txt b/Documentation/video4linux/uvcvideo.txt index 848d620dcc5c..35ce19cddcf8 100644 --- a/Documentation/video4linux/uvcvideo.txt +++ b/Documentation/video4linux/uvcvideo.txt @@ -116,7 +116,7 @@ Description: A UVC control can be mapped to several V4L2 controls. For instance, a UVC pan/tilt control could be mapped to separate pan and tilt V4L2 controls. The UVC control is divided into non overlapping fields using - the 'size' and 'offset' fields and are then independantly mapped to + the 'size' and 'offset' fields and are then independently mapped to V4L2 control. For signed integer V4L2 controls the data_type field should be set to diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt index 5dc972c09b55..fa5f1dbc6b23 100644 --- a/Documentation/virtual/kvm/mmu.txt +++ b/Documentation/virtual/kvm/mmu.txt @@ -347,7 +347,7 @@ To instantiate a large spte, four constraints must be satisfied: - the spte must point to a large host page - the guest pte must be a large pte of at least equivalent size (if tdp is - enabled, there is no guest pte and this condition is satisified) + enabled, there is no guest pte and this condition is satisfied) - if the spte will be writeable, the large page frame may not overlap any write-protected pages - the guest page must be wholly contained by a single memory slot @@ -356,7 +356,7 @@ To check the last two conditions, the mmu maintains a ->write_count set of arrays for each memory slot and large page size. Every write protected page causes its write_count to be incremented, thus preventing instantiation of a large spte. The frames at the end of an unaligned memory slot have -artificically inflated ->write_counts so they can never be instantiated. +artificially inflated ->write_counts so they can never be instantiated. Further reading =============== diff --git a/Documentation/virtual/virtio-spec.txt b/Documentation/virtual/virtio-spec.txt index a350ae135b8c..da094737e2f8 100644 --- a/Documentation/virtual/virtio-spec.txt +++ b/Documentation/virtual/virtio-spec.txt @@ -1403,7 +1403,7 @@ segmentation, if both guests are amenable. Packets are transmitted by placing them in the transmitq, and buffers for incoming packets are placed in the receiveq. In each -case, the packet itself is preceeded by a header: +case, the packet itself is preceded by a header: struct virtio_net_hdr { @@ -1642,7 +1642,7 @@ struct virtio_net_ctrl_mac { The device can filter incoming packets by any number of destination MAC addresses.[footnote: -Since there are no guarentees, it can use a hash filter +Since there are no guarantees, it can use a hash filter orsilently switch to allmulti or promiscuous mode if it is given too many addresses. ] This table is set using the class VIRTIO_NET_CTRL_MAC and the @@ -1805,7 +1805,7 @@ the FLUSH and FLUSH_OUT types are equivalent, the device does not distinguish between them ]). If the device has VIRTIO_BLK_F_BARRIER feature the high bit (VIRTIO_BLK_T_BARRIER) indicates that this request acts as a -barrier and that all preceeding requests must be complete before +barrier and that all preceding requests must be complete before this one, and all following requests must not be started until this is complete. Note that a barrier does not flush caches in the underlying backend device in host, and thus does not serve as @@ -2118,7 +2118,7 @@ This is historical, and independent of the guest page size Otherwise, the guest may begin to re-use pages previously given to the balloon before the device has acknowledged their - withdrawl. [footnote: + withdrawal. [footnote: In this case, deflation advice is merely a courtesy ] diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt index 609d1a34876a..fa206cccf89f 100644 --- a/Documentation/vm/unevictable-lru.txt +++ b/Documentation/vm/unevictable-lru.txt @@ -619,7 +619,7 @@ all PTEs from the page. For this purpose, the unevictable/mlock infrastructure introduced a variant of try_to_unmap() called try_to_munlock(). try_to_munlock() calls the same functions as try_to_unmap() for anonymous and -mapped file pages with an additional argument specifing unlock versus unmap +mapped file pages with an additional argument specifying unlock versus unmap processing. Again, these functions walk the respective reverse maps looking for VM_LOCKED VMAs. When such a VMA is found for anonymous pages and file pages mapped in linear VMAs, as in the try_to_unmap() case, the functions |