Merge tag 'ib-mfd-regulator-arm-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into regulator-rn5t618

Immutable branch between MFD, Regulator and ARM, due for v4.8

9 files changed, 161 insertions, 164 deletions

diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index de79efdad46c..8c68768ebee5 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -128,16 +128,44 @@ X!Edrivers/base/interface.c
 !Edrivers/base/platform.c
 !Edrivers/base/bus.c
      </sect1>
-     <sect1><title>Device Drivers DMA Management</title>
+     <sect1>
+       <title>Buffer Sharing and Synchronization</title>
+       <para>
+         The dma-buf subsystem provides the framework for sharing buffers
+         for hardware (DMA) access across multiple device drivers and
+         subsystems, and for synchronizing asynchronous hardware access.
+       </para>
+       <para>
+         This is used, for example, by drm "prime" multi-GPU support, but
+         is of course not limited to GPU use cases.
+       </para>
+       <para>
+         The three main components of this are: (1) dma-buf, representing
+         a sg_table and exposed to userspace as a file descriptor to allow
+         passing between devices, (2) fence, which provides a mechanism
+         to signal when one device as finished access, and (3) reservation,
+         which manages the shared or exclusive fence(s) associated with
+         the buffer.
+       </para>
+       <sect2><title>dma-buf</title>
 !Edrivers/dma-buf/dma-buf.c
+!Iinclude/linux/dma-buf.h
+       </sect2>
+       <sect2><title>reservation</title>
+!Pdrivers/dma-buf/reservation.c Reservation Object Overview
+!Edrivers/dma-buf/reservation.c
+!Iinclude/linux/reservation.h
+       </sect2>
+       <sect2><title>fence</title>
 !Edrivers/dma-buf/fence.c
-!Edrivers/dma-buf/seqno-fence.c
 !Iinclude/linux/fence.h
+!Edrivers/dma-buf/seqno-fence.c
 !Iinclude/linux/seqno-fence.h
-!Edrivers/dma-buf/reservation.c
-!Iinclude/linux/reservation.h
 !Edrivers/dma-buf/sync_file.c
 !Iinclude/linux/sync_file.h
+       </sect2>
+     </sect1>
+     <sect1><title>Device Drivers DMA Management</title>
 !Edrivers/base/dma-coherent.c
 !Edrivers/base/dma-mapping.c
      </sect1>
diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt
index c6938e50e71f..4da60b463995 100644
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@@ -56,6 +56,7 @@ stable kernels.
 | ARM            | MMU-500         | #841119,#826419 | N/A                     |
 |                |                 |                 |                         |
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375    |
+| Cavium         | ThunderX ITS    | #23144          | CAVIUM_ERRATUM_23144    |
 | Cavium         | ThunderX GICv3  | #23154          | CAVIUM_ERRATUM_23154    |
 | Cavium         | ThunderX Core   | #27456          | CAVIUM_ERRATUM_27456    |
 | Cavium         | ThunderX SMMUv2 | #27704          | N/A		       |
diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
index 0a175d991b52..a407462c885e 100644
--- a/Documentation/devicetree/bindings/display/imx/ldb.txt
+++ b/Documentation/devicetree/bindings/display/imx/ldb.txt
@@ -62,6 +62,7 @@ Required properties:
    display-timings are used instead.
 
 Optional properties (required if display-timings are used):
+ - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
  - display-timings : A node that describes the display timings as defined in
    Documentation/devicetree/bindings/display/display-timing.txt.
  - fsl,data-mapping : should be "spwg" or "jeida"
diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt
index 937785a3eddc..9e6770b105c9 100644
--- a/Documentation/devicetree/bindings/mfd/rn5t618.txt
+++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt
@@ -1,18 +1,21 @@
-* Ricoh RN5T618 PMIC
+* Ricoh RN5T567/RN5T618 PMIC
 
-Ricoh RN5T618 is a power management IC which integrates 3 step-down
-DCDC converters, 7 low-dropout regulators, a Li-ion battery charger,
-fuel gauge, ADC, GPIOs and a watchdog timer. It can be controlled
-through a I2C interface.
+Ricoh RN5T567/RN5T618 is a power management IC family which integrates
+3 to 4 step-down DCDC converters, 7 low-dropout regulators, GPIOs and
+a watchdog timer. The RN5T618 provides additionally a Li-ion battery
+charger, fuel gauge and an ADC. It can be controlled through an I2C
+interface.
 
 Required properties:
- - compatible: should be "ricoh,rn5t618"
+ - compatible: must be one of
+		"ricoh,rn5t567"
+		"ricoh,rn5t618"
  - reg: the I2C slave address of the device
 
 Sub-nodes:
  - regulators: the node is required if the regulator functionality is
-   needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, LDO1,
-   LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
+   needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4
+   (RN5T567), LDO1, LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
    The common bindings for each individual regulator can be found in:
    Documentation/devicetree/bindings/regulator/regulator.txt
 
diff --git a/Documentation/filesystems/devpts.txt b/Documentation/filesystems/devpts.txt
index 30d2fcb32f72..9f94fe276dea 100644
--- a/Documentation/filesystems/devpts.txt
+++ b/Documentation/filesystems/devpts.txt
@@ -1,141 +1,26 @@
+Each mount of the devpts filesystem is now distinct such that ptys
+and their indicies allocated in one mount are independent from ptys
+and their indicies in all other mounts.
 
-To support containers, we now allow multiple instances of devpts filesystem,
-such that indices of ptys allocated in one instance are independent of indices
-allocated in other instances of devpts.
+All mounts of the devpts filesystem now create a /dev/pts/ptmx node
+with permissions 0000.
 
-To preserve backward compatibility, this support for multiple instances is
-enabled only if:
+To retain backwards compatibility the a ptmx device node (aka any node
+created with "mknod name c 5 2") when opened will look for an instance
+of devpts under the name "pts" in the same directory as the ptmx device
+node.
 
-	- CONFIG_DEVPTS_MULTIPLE_INSTANCES=y, and
-	- '-o newinstance' mount option is specified while mounting devpts
-
-IOW, devpts now supports both single-instance and multi-instance semantics.
-
-If CONFIG_DEVPTS_MULTIPLE_INSTANCES=n, there is no change in behavior and
-this referred to as the "legacy" mode. In this mode, the new mount options
-(-o newinstance and -o ptmxmode) will be ignored with a 'bogus option' message
-on console.
-
-If CONFIG_DEVPTS_MULTIPLE_INSTANCES=y and devpts is mounted without the
-'newinstance' option (as in current start-up scripts) the new mount binds
-to the initial kernel mount of devpts. This mode is referred to as the
-'single-instance' mode and the current, single-instance semantics are
-preserved, i.e PTYs are common across the system.
-
-The only difference between this single-instance mode and the legacy mode
-is the presence of new, '/dev/pts/ptmx' node with permissions 0000, which
-can safely be ignored.
-
-If CONFIG_DEVPTS_MULTIPLE_INSTANCES=y and 'newinstance' option is specified,
-the mount is considered to be in the multi-instance mode and a new instance
-of the devpts fs is created. Any ptys created in this instance are independent
-of ptys in other instances of devpts. Like in the single-instance mode, the
-/dev/pts/ptmx node is present. To effectively use the multi-instance mode,
-open of /dev/ptmx must be a redirected to '/dev/pts/ptmx' using a symlink or
-bind-mount.
-
-Eg: A container startup script could do the following:
-
-	$ chmod 0666 /dev/pts/ptmx
-	$ rm /dev/ptmx
-	$ ln -s pts/ptmx /dev/ptmx
-	$ ns_exec -cm /bin/bash
-
-	# We are now in new container
-
-	$ umount /dev/pts
-	$ mount -t devpts -o newinstance lxcpts /dev/pts
-	$ sshd -p 1234
-
-where 'ns_exec -cm /bin/bash' calls clone() with CLONE_NEWNS flag and execs
-/bin/bash in the child process.  A pty created by the sshd is not visible in
-the original mount of /dev/pts.
+As an option instead of placing a /dev/ptmx device node at /dev/ptmx
+it is possible to place a symlink to /dev/pts/ptmx at /dev/ptmx or
+to bind mount /dev/ptx/ptmx to /dev/ptmx.  If you opt for using
+the devpts filesystem in this manner devpts should be mounted with
+the ptmxmode=0666, or chmod 0666 /dev/pts/ptmx should be called.
 
 Total count of pty pairs in all instances is limited by sysctls:
 kernel.pty.max = 4096		- global limit
-kernel.pty.reserve = 1024	- reserve for initial instance
+kernel.pty.reserve = 1024	- reserved for filesystems mounted from the initial mount namespace
 kernel.pty.nr			- current count of ptys
 
 Per-instance limit could be set by adding mount option "max=<count>".
 This feature was added in kernel 3.4 together with sysctl kernel.pty.reserve.
 In kernels older than 3.4 sysctl kernel.pty.max works as per-instance limit.
-
-User-space changes
-------------------
-
-In multi-instance mode (i.e '-o newinstance' mount option is specified at least
-once), following user-space issues should be noted.
-
-1. If -o newinstance mount option is never used, /dev/pts/ptmx can be ignored
-   and no change is needed to system-startup scripts.
-
-2. To effectively use multi-instance mode (i.e -o newinstance is specified)
-   administrators or startup scripts should "redirect" open of /dev/ptmx to
-   /dev/pts/ptmx using either a bind mount or symlink.
-
-	$ mount -t devpts -o newinstance devpts /dev/pts
-
-   followed by either
-
-	$ rm /dev/ptmx
-	$ ln -s pts/ptmx /dev/ptmx
-	$ chmod 666 /dev/pts/ptmx
-   or
-	$ mount -o bind /dev/pts/ptmx /dev/ptmx
-
-3. The '/dev/ptmx -> pts/ptmx' symlink is the preferred method since it
-   enables better error-reporting and treats both single-instance and
-   multi-instance mounts similarly.
-
-   But this method requires that system-startup scripts set the mode of
-   /dev/pts/ptmx correctly (default mode is 0000). The scripts can set the
-   mode by, either
-
-   	- adding ptmxmode mount option to devpts entry in /etc/fstab, or
-	- using 'chmod 0666 /dev/pts/ptmx'
-
-4. If multi-instance mode mount is needed for containers, but the system
-   startup scripts have not yet been updated, container-startup scripts
-   should bind mount /dev/ptmx to /dev/pts/ptmx to avoid breaking single-
-   instance mounts.
-
-   Or, in general, container-startup scripts should use:
-
-	mount -t devpts -o newinstance -o ptmxmode=0666 devpts /dev/pts
-	if [ ! -L /dev/ptmx ]; then
-		mount -o bind /dev/pts/ptmx /dev/ptmx
-	fi
-
-   When all devpts mounts are multi-instance, /dev/ptmx can permanently be
-   a symlink to pts/ptmx and the bind mount can be ignored.
-
-5. A multi-instance mount that is not accompanied by the /dev/ptmx to
-   /dev/pts/ptmx redirection would result in an unusable/unreachable pty.
-
-	mount -t devpts -o newinstance lxcpts /dev/pts
-
-   immediately followed by:
-
-	open("/dev/ptmx")
-
-    would create a pty, say /dev/pts/7, in the initial kernel mount.
-    But /dev/pts/7 would be invisible in the new mount.
-
-6. The permissions for /dev/pts/ptmx node should be specified when mounting
-   /dev/pts, using the '-o ptmxmode=%o' mount option (default is 0000).
-
-	mount -t devpts -o newinstance -o ptmxmode=0644 devpts /dev/pts
-
-   The permissions can be later be changed as usual with 'chmod'.
-
-	chmod 666 /dev/pts/ptmx
-
-7. A mount of devpts without the 'newinstance' option results in binding to
-   initial kernel mount.  This behavior while preserving legacy semantics,
-   does not provide strict isolation in a container environment. i.e by
-   mounting devpts without the 'newinstance' option, a container could
-   get visibility into the 'host' or root container's devpts.
-   
-   To workaround this and have strict isolation, all mounts of devpts,
-   including the mount in the root container, should use the newinstance
-   option.
diff --git a/Documentation/kdump/gdbmacros.txt b/Documentation/kdump/gdbmacros.txt
index 35f6a982a0d5..220d0a80ca2c 100644
--- a/Documentation/kdump/gdbmacros.txt
+++ b/Documentation/kdump/gdbmacros.txt
@@ -170,21 +170,92 @@ document trapinfo
 	address the kernel panicked.
 end
 
+define dump_log_idx
+	set $idx = $arg0
+	if ($argc > 1)
+		set $prev_flags = $arg1
+	else
+		set $prev_flags = 0
+	end
+	set $msg = ((struct printk_log *) (log_buf + $idx))
+	set $prefix = 1
+	set $newline = 1
+	set $log = log_buf + $idx + sizeof(*$msg)
 
-define dmesg
-	set $i = 0
-	set $end_idx = (log_end - 1) & (log_buf_len - 1)
+	# prev & LOG_CONT && !(msg->flags & LOG_PREIX)
+	if (($prev_flags & 8) && !($msg->flags & 4))
+		set $prefix = 0
+	end
+
+	# msg->flags & LOG_CONT
+	if ($msg->flags & 8)
+		# (prev & LOG_CONT && !(prev & LOG_NEWLINE))
+		if (($prev_flags & 8) && !($prev_flags & 2))
+			set $prefix = 0
+		end
+		# (!(msg->flags & LOG_NEWLINE))
+		if (!($msg->flags & 2))
+			set $newline = 0
+		end
+	end
+
+	if ($prefix)
+		printf "[%5lu.%06lu] ", $msg->ts_nsec / 1000000000, $msg->ts_nsec % 1000000000
+	end
+	if ($msg->text_len != 0)
+		eval "printf \"%%%d.%ds\", $log", $msg->text_len, $msg->text_len
+	end
+	if ($newline)
+		printf "\n"
+	end
+	if ($msg->dict_len > 0)
+		set $dict = $log + $msg->text_len
+		set $idx = 0
+		set $line = 1
+		while ($idx < $msg->dict_len)
+			if ($line)
+				printf " "
+				set $line = 0
+			end
+			set $c = $dict[$idx]
+			if ($c == '\0')
+				printf "\n"
+				set $line = 1
+			else
+				if ($c < ' ' || $c >= 127 || $c == '\\')
+					printf "\\x%02x", $c
+				else
+					printf "%c", $c
+				end
+			end
+			set $idx = $idx + 1
+		end
+		printf "\n"
+	end
+end
+document dump_log_idx
+	Dump a single log given its index in the log buffer.  The first
+	parameter is the index into log_buf, the second is optional and
+	specified the previous log buffer's flags, used for properly
+	formatting continued lines.
+end
 
-	while ($i < logged_chars)
-		set $idx = (log_end - 1 - logged_chars + $i) & (log_buf_len - 1)
+define dmesg
+	set $i = log_first_idx
+	set $end_idx = log_first_idx
+	set $prev_flags = 0
 
-		if ($idx + 100 <= $end_idx) || \
-		   ($end_idx <= $idx && $idx + 100 < log_buf_len)
-			printf "%.100s", &log_buf[$idx]
-			set $i = $i + 100
+	while (1)
+		set $msg = ((struct printk_log *) (log_buf + $i))
+		if ($msg->len == 0)
+			set $i = 0
 		else
-			printf "%c", log_buf[$idx]
-			set $i = $i + 1
+			dump_log_idx $i $prev_flags
+			set $i = $i + $msg->len
+			set $prev_flags = $msg->flags
+		end
+		if ($i == $end_idx)
+			loop_break
 		end
 	end
 end
diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt
index 631b0f7ae16f..9d05ed7f7da5 100644
--- a/Documentation/networking/dsa/dsa.txt
+++ b/Documentation/networking/dsa/dsa.txt
@@ -369,8 +369,6 @@ does not allocate any driver private context space.
 Switch configuration
 --------------------
 
-- priv_size: additional size needed by the switch driver for its private context
-
 - tag_protocol: this is to indicate what kind of tagging protocol is supported,
   should be a valid value from the dsa_tag_protocol enum
 
@@ -416,11 +414,6 @@ PHY devices and link management
   to the switch port MDIO registers. If unavailable return a negative error
   code.
 
-- poll_link: Function invoked by DSA to query the link state of the switch
-  builtin Ethernet PHYs, per port. This function is responsible for calling
-  netif_carrier_{on,off} when appropriate, and can be used to poll all ports in a
-  single call. Executes from workqueue context.
-
 - adjust_link: Function invoked by the PHY library when a slave network device
   is attached to a PHY device. This function is responsible for appropriately
   configuring the switch port link parameters: speed, duplex, pause based on
@@ -542,6 +535,16 @@ Bridge layer
 Bridge VLAN filtering
 ---------------------
 
+- port_vlan_filtering: bridge layer function invoked when the bridge gets
+  configured for turning on or off VLAN filtering. If nothing specific needs to
+  be done at the hardware level, this callback does not need to be implemented.
+  When VLAN filtering is turned on, the hardware must be programmed with
+  rejecting 802.1Q frames which have VLAN IDs outside of the programmed allowed
+  VLAN ID map/rules.  If there is no PVID programmed into the switch port,
+  untagged frames must be rejected as well. When turned off the switch must
+  accept any 802.1Q frames irrespective of their VLAN ID, and untagged frames are
+  allowed.
+
 - port_vlan_prepare: bridge layer function invoked when the bridge prepares the
   configuration of a VLAN on the given port. If the operation is not supported
   by the hardware, this function should return -EOPNOTSUPP to inform the bridge
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 6c7f365b1515..9ae929395b24 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1036,15 +1036,17 @@ proxy_arp_pvlan - BOOLEAN
 
 shared_media - BOOLEAN
 	Send(router) or accept(host) RFC1620 shared media redirects.
-	Overrides ip_secure_redirects.
+	Overrides secure_redirects.
 	shared_media for the interface will be enabled if at least one of
 	conf/{all,interface}/shared_media is set to TRUE,
 	it will be disabled otherwise
 	default TRUE
 
 secure_redirects - BOOLEAN
-	Accept ICMP redirect messages only for gateways,
-	listed in default gateway list.
+	Accept ICMP redirect messages only to gateways listed in the
+	interface's current gateway list. Even if disabled, RFC1122 redirect
+	rules still apply.
+	Overridden by shared_media.
 	secure_redirects for the interface will be enabled if at least one of
 	conf/{all,interface}/secure_redirects is set to TRUE,
 	it will be disabled otherwise
diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt
index 20d05719bceb..3849814bfe6d 100644
--- a/Documentation/security/keys.txt
+++ b/Documentation/security/keys.txt
@@ -826,7 +826,8 @@ The keyctl syscall functions are:
  (*) Compute a Diffie-Hellman shared secret or public key
 
        long keyctl(KEYCTL_DH_COMPUTE, struct keyctl_dh_params *params,
-		   char *buffer, size_t buflen);
+		   char *buffer, size_t buflen,
+		   void *reserved);
 
      The params struct contains serial numbers for three keys:
 
@@ -843,6 +844,8 @@ The keyctl syscall functions are:
      public key.  If the base is the remote public key, the result is
      the shared secret.
 
+     The reserved argument must be set to NULL.
+
      The buffer length must be at least the length of the prime, or zero.
 
      If the buffer length is nonzero, the length of the result is