Merge tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:
 "We have a relatively big changeset for ARC for 4.7.

  The highlight is support for EZChip (now Mellanox) NPS-400 network
  processor, a 400-Gb throughput C-programmable packet processor based
  on ARC700 cores from Synopsys. See

        http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf

  Also present are irqchip and clocksource drivers for NPS as agreed
  with respective maintainers to go via ARC tree due to an soc header
  dependency.  I have the needed ACKs from Jason, Marc, Daniel.  You
  might run into a trivial merge conflict in drivers/irqchip/*

  This EZChip platform support required some deep changes in ARC
  architecture code and also opportunity to cleanup past sins (legacy
  irq domains, missing irq domain lookup, hard coded timer irqs...)

  Summary:

   - Support for EZChip (now Mellanox) NPS-400 Network processor based
     on ARC700

   - NPS interrupt controller and clocksource drivers

   - ARC timers probed off DT

   - ARC iqrchips switching to linear domain (upgrade from legacy
     domains)"

* tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (37 commits)
  arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core
  arc: axs10x: Add DT bindings for I2S PLL Clock
  ARC: pae: STRICT_MM_TYPECHECKS was broken
  ARC: Add eznps platform to Kconfig and Makefile
  ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE
  ARC: [plat-eznps] Use dedicated cpu_relax()
  ARC: [plat-eznps] Use dedicated identity auxiliary register.
  ARC: [plat-eznps] Use dedicated SMP barriers
  ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg
  ARC: [plat-eznps] Use dedicated user stack top
  ARC: [plat-eznps] Add eznps platform
  ARC: [plat-eznps] Add eznps board defconfig and dts
  ARC: Mark secondary cpu online only after all HW setup is done
  ARC: rwlock: disable interrupts in !LLSC variant
  ARC: Make vmalloc size configurable
  ARC: clean out UAPI byteorder.h clean off Kconfig symbol
  irqchip: add nps Internal and external irqchips
  clocksource: Add NPS400 timers driver
  soc: Support for EZchip SoC
  Documentation: Add EZchip vendor to binding list
  ...

1 files changed, 20 insertions, 7 deletions

diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index 1b0f0f458a2b..86548701023c 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -14,10 +14,11 @@
  *
  */
 
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
+#include <linux/libfdt.h>
 
 #include <asm/asm-offsets.h>
-#include <asm/clk.h>
 #include <asm/io.h>
 #include <asm/mach_desc.h>
 #include <asm/mcip.h>
@@ -389,6 +390,13 @@ axs103_set_freq(unsigned int id, unsigned int fd, unsigned int od)
 
 static void __init axs103_early_init(void)
 {
+	int offset = fdt_path_offset(initial_boot_params, "/cpu_card/core_clk");
+	const struct fdt_property *prop = fdt_get_property(initial_boot_params,
+							   offset,
+							   "clock-frequency",
+							   NULL);
+	u32 freq = be32_to_cpu(*(u32*)(prop->data)) / 1000000, orig = freq;
+
 	/*
 	 * AXS103 configurations for SMP/QUAD configurations share device tree
 	 * which defaults to 90 MHz. However recent failures of Quad config
@@ -401,12 +409,10 @@ static void __init axs103_early_init(void)
 #ifdef CONFIG_ARC_MCIP
 	unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F;
 	if (num_cores > 2)
-		arc_set_core_freq(50 * 1000000);
-	else if (num_cores == 2)
-		arc_set_core_freq(75 * 1000000);
+		freq = 50;
 #endif
 
-	switch (arc_get_core_freq()/1000000) {
+	switch (freq) {
 	case 33:
 		axs103_set_freq(1, 1, 1);
 		break;
@@ -431,11 +437,18 @@ static void __init axs103_early_init(void)
 		 * DT "clock-frequency" might not match with board value.
 		 * Hence update it to match the board value.
 		 */
-		arc_set_core_freq(axs103_get_freq() * 1000000);
+		freq = axs103_get_freq();
 		break;
 	}
 
-	pr_info("Freq is %dMHz\n", axs103_get_freq());
+	pr_info("Freq is %dMHz\n", freq);
+
+	/* Patching .dtb in-place with new core clock value */
+	if (freq != orig ) {
+		freq = cpu_to_be32(freq * 1000000);
+		fdt_setprop_inplace(initial_boot_params, offset,
+				    "clock-frequency", &freq, sizeof(freq));
+	}
 
 	/* Memory maps already config in pre-bootloader */