diff options
| author | Sebastian Andrzej Siewior <bigeasy@linutronix.de> | 2013-08-20 18:35:49 +0200 |
|---|---|---|
| committer | Felipe Balbi <balbi@ti.com> | 2013-08-27 14:18:41 -0500 |
| commit | 781f17983015dae33324e34d1bb831e715fa04d4 (patch) | |
| tree | 3325350ea933ed6bc1c4797116646f14055f8e22 /arch/arm/boot/dts/am335x-evm.dts | |
| parent | 9dfa36218dadf1821da5823773dd689b4e650e00 (diff) | |
usb: musb: am335x-evm: Do not remove the session bit HOST-only mode
This is what I observe:
On the first connect, the musb starts with DEVCTL.Session set. On
disconnect, musb_core calls try_idle. That functions removes the Session
bit signalizing that the session is over (something that only in OTG is
required). A new device, that is plugged, is no longer recognized.
I've setup a timer and checked the DEVCTL register and I haven't seen a
change in VBus and I saw the B-Device bit set. After setting the IDDIG
into A mode and forcing the device to behave like a A device, I didn't
see a change.
Neither VBUS goes to 0b11 nor does a session start request comes.
In the TI-v3.2 kernel they skip to call musb_platform_try_idle() in the
OTG_STATE_A_WAIT_BCON state while not in OTG mode.
Since the second port hast a standard A plug the patch changes the port
to run in host mode only and skips the timer which would remove
DEVCTL.Session so we can reconnect to another device later.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'arch/arm/boot/dts/am335x-evm.dts')
| -rw-r--r-- | arch/arm/boot/dts/am335x-evm.dts | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 648a67e74d1b..e8ec8756e498 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -192,6 +192,7 @@ usb@47401800 { status = "okay"; + dr_mode = "host"; }; dma-controller@07402000 { |