Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "This contains cleanups as preparation for other branches adding new
  features, we pulled 16 branches for 9 platforms into this one.

  Most notable here is the removal of support for ATAGS based OMAP4
  systems.  Since all OMAP4 machines are fully functional with DT based
  booting in 3.10, we can remove a lot of code here.

  Also noteworthy is Maxime Ripard's cleanup of the machine descriptors,
  which means we need no machine descriptors in a lot more cases and can
  boot additional machines by just having the respective device drivers
  enabled."

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
  ARM: picoxcell: remove .nr_irqs reference
  ARM: s5p64x0: avoid build warning for uncompress.h
  ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header
  ARM: SAMSUNG: Remove legacy watchdog reset code
  ARM: SAMSUNG: Let platforms use the new watchdog reset driver
  ARM: SAMSUNG: Add watchdog reset driver
  ARM: SAMSUNG: Use local definitions of watchdog registers
  watchdog: s3c2410_wdt: Use local register definitions
  ARM: S5P64X0: Use common uncompress.h part for plat-samsung
  ARM: SAMSUNG: Consolidate uncompress subroutine
  ARM: at91: drop rm9200dk board support
  ARM: dts: msm: Fix merge resolution
  ARM: OMAP1: Remove dma.h
  ARM: OMAP1: Remove legacy irda.h and irda setup from board files
  ARM: OMAP1: Remove duplicated DMA channel definitions
  ARM: OMAP1: Remove McBSP DMA channel definitions
  ARM: OMAP2+: Remove dma.h
  ARM: OMAP2+: hwmod: Remove remaining DMA channel definitions
  ARM: OMAP2+: Remove duplicated DMA channel definitions
  ARM: OMAP2+: Remove AES crypto device DMA channel definitions
  ...

1 files changed, 108 insertions, 105 deletions

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index bf18a735c37d..f0091af6c285 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -9,7 +9,10 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Atmel AT91SAM9G45 family SoC";
@@ -83,7 +86,7 @@
 			pit: timer@fffffd30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
 
@@ -95,19 +98,19 @@
 			tcb0: timer@fff7c000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfff7c000 0x100>;
-				interrupts = <18 4 0>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			tcb1: timer@fffd4000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfffd4000 0x100>;
-				interrupts = <18 4 0>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			dma: dma-controller@ffffec00 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffec00 0x200>;
-				interrupts = <21 4 0>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
 			};
 
@@ -130,221 +133,221 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<1 12 0x1 0x0	/* PB12 periph A */
-							 1 13 0x1 0x0>;	/* PB13 periph A */
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB13 periph A */
 					};
 				};
 
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<1 19 0x1 0x1	/* PB19 periph A with pullup */
-							 1 18 0x1 0x0>;	/* PB18 periph A */
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB19 periph A with pullup */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
 					};
 
 					pinctrl_usart0_rts: usart0_rts-0 {
 						atmel,pins =
-							<1 17 0x2 0x0>;	/* PB17 periph B */
+							<AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB17 periph B */
 					};
 
 					pinctrl_usart0_cts: usart0_cts-0 {
 						atmel,pins =
-							<1 15 0x2 0x0>;	/* PB15 periph B */
+							<AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B */
 					};
 				};
 
 				uart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<1 4 0x1 0x1	/* PB4 periph A with pullup */
-							 1 5 0x1 0x0>;	/* PB5 periph A */
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB4 periph A with pullup */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
 					};
 
 					pinctrl_usart1_rts: usart1_rts-0 {
 						atmel,pins =
-							<3 16 0x1 0x0>;	/* PD16 periph A */
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A */
 					};
 
 					pinctrl_usart1_cts: usart1_cts-0 {
 						atmel,pins =
-							<3 17 0x1 0x0>;	/* PD17 periph A */
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD17 periph A */
 					};
 				};
 
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<1 6 0x1 0x1	/* PB6 periph A with pullup */
-							 1 7 0x1 0x0>;	/* PB7 periph A */
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB6 periph A with pullup */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A */
 					};
 
 					pinctrl_usart2_rts: usart2_rts-0 {
 						atmel,pins =
-							<2 9 0x2 0x0>;	/* PC9 periph B */
+							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC9 periph B */
 					};
 
 					pinctrl_usart2_cts: usart2_cts-0 {
 						atmel,pins =
-							<2 11 0x2 0x0>;	/* PC11 periph B */
+							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC11 periph B */
 					};
 				};
 
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<1 8 0x1 0x1	/* PB9 periph A with pullup */
-							 1 9 0x1 0x0>;	/* PB8 periph A */
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB9 periph A with pullup */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
 					};
 
 					pinctrl_usart3_rts: usart3_rts-0 {
 						atmel,pins =
-							<0 23 0x2 0x0>;	/* PA23 periph B */
+							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B */
 					};
 
 					pinctrl_usart3_cts: usart3_cts-0 {
 						atmel,pins =
-							<0 24 0x2 0x0>;	/* PA24 periph B */
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA24 periph B */
 					};
 				};
 
 				nand {
 					pinctrl_nand: nand-0 {
 						atmel,pins =
-							<2 8 0x0 0x1	/* PC8 gpio RDY pin pull_up*/
-							 2 14 0x0 0x1>;	/* PC14 gpio enable pin pull_up */
+							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PC8 gpio RDY pin pull_up*/
+							 AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PC14 gpio enable pin pull_up */
 					};
 				};
 
 				macb {
 					pinctrl_macb_rmii: macb_rmii-0 {
 						atmel,pins =
-							<0 10 0x1 0x0	/* PA10 periph A */
-							 0 11 0x1 0x0	/* PA11 periph A */
-							 0 12 0x1 0x0	/* PA12 periph A */
-							 0 13 0x1 0x0	/* PA13 periph A */
-							 0 14 0x1 0x0	/* PA14 periph A */
-							 0 15 0x1 0x0	/* PA15 periph A */
-							 0 16 0x1 0x0	/* PA16 periph A */
-							 0 17 0x1 0x0	/* PA17 periph A */
-							 0 18 0x1 0x0	/* PA18 periph A */
-							 0 19 0x1 0x0>;	/* PA19 periph A */
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA19 periph A */
 					};
 
 					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
 						atmel,pins =
-							<0 6 0x2 0x0	/* PA6 periph B */
-							 0 7 0x2 0x0	/* PA7 periph B */
-							 0 8 0x2 0x0	/* PA8 periph B */
-							 0 9 0x2 0x0	/* PA9 periph B */
-							 0 27 0x2 0x0	/* PA27 periph B */
-							 0 28 0x2 0x0	/* PA28 periph B */
-							 0 29 0x2 0x0	/* PA29 periph B */
-							 0 30 0x2 0x0>;	/* PA30 periph B */
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA6 periph B */
+							 AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA7 periph B */
+							 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA8 periph B */
+							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA9 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA29 periph B */
+							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
 					};
 				};
 
 				mmc0 {
 					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
 						atmel,pins =
-							<0 0 0x1 0x0	/* PA0 periph A */
-							 0 1 0x1 0x1	/* PA1 periph A with pullup */
-							 0 2 0x1 0x1>;	/* PA2 periph A with pullup */
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA2 periph A with pullup */
 					};
 
 					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
 						atmel,pins =
-							<0 3 0x1 0x1	/* PA3 periph A with pullup */
-							 0 4 0x1 0x1	/* PA4 periph A with pullup */
-							 0 5 0x1 0x1>;	/* PA5 periph A with pullup */
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA3 periph A with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA4 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA5 periph A with pullup */
 					};
 
 					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
 						atmel,pins =
-							<0 6 0x1 0x1	/* PA6 periph A with pullup */
-							 0 7 0x1 0x1	/* PA7 periph A with pullup */
-							 0 8 0x1 0x1	/* PA8 periph A with pullup */
-							 0 9 0x1 0x1>;	/* PA9 periph A with pullup */
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA9 periph A with pullup */
 					};
 				};
 
 				mmc1 {
 					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
 						atmel,pins =
-							<0 31 0x1 0x0	/* PA31 periph A */
-							 0 22 0x1 0x1	/* PA22 periph A with pullup */
-							 0 23 0x1 0x1>;	/* PA23 periph A with pullup */
+							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA31 periph A */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA22 periph A with pullup */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA23 periph A with pullup */
 					};
 
 					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
 						atmel,pins =
-							<0 24 0x1 0x1	/* PA24 periph A with pullup */
-							 0 25 0x1 0x1	/* PA25 periph A with pullup */
-							 0 26 0x1 0x1>;	/* PA26 periph A with pullup */
+							<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA24 periph A with pullup */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA25 periph A with pullup */
+							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA26 periph A with pullup */
 					};
 
 					pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
 						atmel,pins =
-							<0 27 0x1 0x1	/* PA27 periph A with pullup */
-							 0 28 0x1 0x1	/* PA28 periph A with pullup */
-							 0 29 0x1 0x1	/* PA29 periph A with pullup */
-							 0 20 0x1 0x1>;	/* PA30 periph A with pullup */
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA27 periph A with pullup */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA29 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA30 periph A with pullup */
 					};
 				};
 
 				ssc0 {
 					pinctrl_ssc0_tx: ssc0_tx-0 {
 						atmel,pins =
-							<3 0 0x1 0x0	/* PD0 periph A */
-							 3 1 0x1 0x0	/* PD1 periph A */
-							 3 2 0x1 0x0>;	/* PD2 periph A */
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD0 periph A */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD1 periph A */
+							 AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD2 periph A */
 					};
 
 					pinctrl_ssc0_rx: ssc0_rx-0 {
 						atmel,pins =
-							<3 3 0x1 0x0	/* PD3 periph A */
-							 3 4 0x1 0x0	/* PD4 periph A */
-							 3 5 0x1 0x0>;	/* PD5 periph A */
+							<AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD3 periph A */
+							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD4 periph A */
+							 AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD5 periph A */
 					};
 				};
 
 				ssc1 {
 					pinctrl_ssc1_tx: ssc1_tx-0 {
 						atmel,pins =
-							<3 10 0x1 0x0	/* PD10 periph A */
-							 3 11 0x1 0x0	/* PD11 periph A */
-							 3 12 0x1 0x0>;	/* PD12 periph A */
+							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A */
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A */
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A */
 					};
 
 					pinctrl_ssc1_rx: ssc1_rx-0 {
 						atmel,pins =
-							<3 13 0x1 0x0	/* PD13 periph A */
-							 3 14 0x1 0x0	/* PD14 periph A */
-							 3 15 0x1 0x0>;	/* PD15 periph A */
+							<AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD13 periph A */
+							 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD14 periph A */
+							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD15 periph A */
 					};
 				};
 
 				spi0 {
 					pinctrl_spi0: spi0-0 {
 						atmel,pins =
-							<1 0 0x1 0x0	/* PB0 periph A SPI0_MISO pin */
-							 1 1 0x1 0x0	/* PB1 periph A SPI0_MOSI pin */
-							 1 2 0x1 0x0>;	/* PB2 periph A SPI0_SPCK pin */
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI0_MISO pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI0_MOSI pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI0_SPCK pin */
 					};
 				};
 
 				spi1 {
 					pinctrl_spi1: spi1-0 {
 						atmel,pins =
-							<1 14 0x1 0x0	/* PB14 periph A SPI1_MISO pin */
-							 1 15 0x1 0x0	/* PB15 periph A SPI1_MOSI pin */
-							 1 16 0x1 0x0>;	/* PB16 periph A SPI1_SPCK pin */
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A SPI1_MISO pin */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A SPI1_MOSI pin */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB16 periph A SPI1_SPCK pin */
 					};
 				};
 
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
-					interrupts = <2 4 1>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -354,7 +357,7 @@
 				pioB: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
-					interrupts = <3 4 1>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -364,7 +367,7 @@
 				pioC: gpio@fffff600 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff600 0x200>;
-					interrupts = <4 4 1>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -374,7 +377,7 @@
 				pioD: gpio@fffff800 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff800 0x200>;
-					interrupts = <5 4 1>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -384,7 +387,7 @@
 				pioE: gpio@fffffa00 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffffa00 0x200>;
-					interrupts = <5 4 1>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -395,7 +398,7 @@
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
@@ -404,7 +407,7 @@
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
-				interrupts = <7 4 5>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -415,7 +418,7 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
-				interrupts = <8 4 5>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -426,7 +429,7 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
-				interrupts = <9 4 5>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -437,7 +440,7 @@
 			usart3: serial@fff98000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff98000 0x200>;
-				interrupts = <10 4 5>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
@@ -448,7 +451,7 @@
 			macb0: ethernet@fffbc000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;
-				interrupts = <25 4 3>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb_rmii>;
 				status = "disabled";
@@ -457,7 +460,7 @@
 			i2c0: i2c@fff84000 {
 				compatible = "atmel,at91sam9g10-i2c";
 				reg = <0xfff84000 0x100>;
-				interrupts = <12 4 6>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -466,7 +469,7 @@
 			i2c1: i2c@fff88000 {
 				compatible = "atmel,at91sam9g10-i2c";
 				reg = <0xfff88000 0x100>;
-				interrupts = <13 4 6>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -475,7 +478,7 @@
 			ssc0: ssc@fff9c000 {
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfff9c000 0x4000>;
-				interrupts = <16 4 5>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
@@ -484,7 +487,7 @@
 			ssc1: ssc@fffa0000 {
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfffa0000 0x4000>;
-				interrupts = <17 4 5>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				status = "disabled";
@@ -493,7 +496,7 @@
 			adc0: adc@fffb0000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffb0000 0x100>;
-				interrupts = <20 4 0>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0xff>;
 				atmel,adc-vref = <3300>;
@@ -533,7 +536,7 @@
 			mmc0: mmc@fff80000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfff80000 0x600>;
-				interrupts = <11 4 0>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma 1 0>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
@@ -544,7 +547,7 @@
 			mmc1: mmc@fffd0000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfffd0000 0x600>;
-				interrupts = <29 4 0>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma 1 13>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
@@ -592,8 +595,8 @@
 			atmel,nand-cmd-offset = <22>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			gpios = <&pioC 8 0
-				 &pioC 14 0
+			gpios = <&pioC 8 GPIO_ACTIVE_HIGH
+				 &pioC 14 GPIO_ACTIVE_HIGH
 				 0
 				>;
 			status = "disabled";
@@ -602,22 +605,22 @@
 		usb0: ohci@00700000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00700000 0x100000>;
-			interrupts = <22 4 2>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 
 		usb1: ehci@00800000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
-			interrupts = <22 4 2>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 	};
 
 	i2c@0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 20 0 /* sda */
-			 &pioA 21 0 /* scl */
+		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;