Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "These changes from 30 individual branches for the most part update
  device tree files, but there are also a few source code changes that
  have crept in this time, usually in order to atomically move over a
  driver from using hardcoded data to DT probing.

  A number of platforms change their DT files to use the C preprocessor,
  which is causing a bit of churn, but that is hopefully only this once"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
  ARM: at91: dt: rm9200ek: add spi support
  ARM: at91: dt: rm9200: add spi support
  ARM: at91/DT: at91sam9n12: add SPI DMA client infos
  ARM: at91/DT: sama5d3: add SPI DMA client infos
  ARM: at91/DT: fix SPI compatibility string
  ARM: Kirkwood: Fix the internal register ranges translation
  ARM: dts: bcm281xx: change comment to C89 style
  ARM: mmc: bcm281xx SDHCI driver (dt mods)
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
  ARM: shmobile: irqpin: add a DT property to enable masking on parent
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ...

1 files changed, 44 insertions, 17 deletions

diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
index c0bc426952ea..9db41b9d8358 100644
--- a/arch/arm/boot/dts/href.dtsi
+++ b/arch/arm/boot/dts/href.dtsi
@@ -9,7 +9,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "dbx5x0.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dbx5x0.dtsi"
 
 / {
 	memory {
@@ -27,7 +28,7 @@
 		};
 	};
 
-	soc-u9500 {
+	soc {
 		uart@80120000 {
 			status = "okay";
 		};
@@ -45,14 +46,14 @@
 				compatible = "tc3589x";
 				reg = <0x42>;
 				interrupt-parent = <&gpio6>;
-				interrupts = <25 0x1>;
+				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
 
 				interrupt-controller;
 				#interrupt-cells = <2>;
 
 				tc3589x_gpio: tc3589x_gpio {
 					compatible = "tc3589x-gpio";
-					interrupts = <0 0x1>;
+					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
 
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -63,17 +64,43 @@
 		};
 
 		i2c@80128000 {
-			lp5521@0x33 {
-				compatible = "lp5521";
+			lp5521@33 {
+				compatible = "national,lp5521";
 				reg = <0x33>;
+				label = "lp5521_pri";
+				clock-mode = /bits/ 8 <2>;
+				chan0 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan1 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan2 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
 			};
-
-			lp5521@0x34 {
-				compatible = "lp5521";
+			lp5521@34 {
+				compatible = "national,lp5521";
 				reg = <0x34>;
+				label = "lp5521_sec";
+				clock-mode = /bits/ 8 <2>;
+				chan0 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan1 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan2 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
 			};
-
-			bh1780@0x29 {
+			bh1780@29 {
 				compatible = "rohm,bh1780gli";
 				reg = <0x33>;
 			};
@@ -82,7 +109,7 @@
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 			mmc-cap-sd-highspeed;
 			mmc-cap-mmc-highspeed;
@@ -97,7 +124,7 @@
 		// WLAN SDIO channel
 		sdi1_per2@80118000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 
 			status = "okay";
@@ -106,7 +133,7 @@
 		// PoP:ed eMMC
 		sdi2_per3@80005000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
 
@@ -116,7 +143,7 @@
 		// On-board eMMC
 		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <50000000>;
+		        max-frequency = <100000000>;
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
@@ -236,7 +263,7 @@
 						regulator-name = "V-MMC-SD";
 					};
 
-					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
 						regulator-name = "V-INTCORE";
 					};
 
@@ -256,7 +283,7 @@
 						regulator-name = "V-AMIC1";
 					};
 
-					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
 						regulator-name = "V-AMIC2";
 					};