Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "These changes from 30 individual branches for the most part update
  device tree files, but there are also a few source code changes that
  have crept in this time, usually in order to atomically move over a
  driver from using hardcoded data to DT probing.

  A number of platforms change their DT files to use the C preprocessor,
  which is causing a bit of churn, but that is hopefully only this once"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
  ARM: at91: dt: rm9200ek: add spi support
  ARM: at91: dt: rm9200: add spi support
  ARM: at91/DT: at91sam9n12: add SPI DMA client infos
  ARM: at91/DT: sama5d3: add SPI DMA client infos
  ARM: at91/DT: fix SPI compatibility string
  ARM: Kirkwood: Fix the internal register ranges translation
  ARM: dts: bcm281xx: change comment to C89 style
  ARM: mmc: bcm281xx SDHCI driver (dt mods)
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
  ARM: shmobile: irqpin: add a DT property to enable masking on parent
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ...

1 files changed, 69 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index 6f82d9368948..16c3888b7b15 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -22,6 +22,49 @@
 		};
 	};
 
+	src@101e0000 {
+		/* These chrystal drivers are not used on this board */
+		disable-sxtalo;
+		disable-mxtalo;
+	};
+
+	pinctrl {
+		/* Hog CD pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&cd_default_mode>;
+
+		mmcsd-cd {
+			cd_default_mode: cd_default {
+				cd_default_cfg1 {
+					/* CD input GPIO */
+					ste,pins = "GPIO111_H21";
+					ste,input = <0>;
+				};
+				cd_default_cfg2 {
+					/* CD GPIO biasing */
+					ste,pins = "GPIO112_J21";
+					ste,output = <0>;
+				};
+			};
+		};
+		user-led {
+			user_led_default_mode: user_led_default {
+				user_led_default_cfg {
+					ste,pins = "GPIO2_C5";
+					ste,output = <1>;
+				};
+			};
+		};
+		user-button {
+			user_button_default_mode: user_button_default {
+				user_button_default_cfg {
+					ste,pins = "GPIO3_A4";
+					ste,input = <0>;
+				};
+			};
+		};
+	};
+
 	/* Custom board node with GPIO pins to active etc */
 	usb-s8815 {
 		/* The S8815 is using this very GPIO pin for the SMSC91x IRQs */
@@ -33,4 +76,30 @@
 			gpios = <&gpio3 16 0x1>;
 		};
 	};
+
+	/* The user LED on the board is set up to be used for heartbeat */
+	leds {
+		compatible = "gpio-leds";
+		user-led {
+			label = "user_led";
+			gpios = <&gpio0 2 0x1>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led_default_mode>;
+		};
+	};
+
+	/* User key mapped in as "escape" */
+	gpio-keys {
+		compatible = "gpio-keys";
+		user-button {
+			label = "user_button";
+			gpios = <&gpio0 3 0x1>;
+			linux,code = <1>; /* KEY_ESC */
+			gpio-key,wakeup;
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_button_default_mode>;
+		};
+	};
 };