Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT changes continue to be the bulk of our merge window contents.

  We continue to have a large set of changes across the board as new
  platforms and drivers are added.

  Some of the new platforms are:
   - Alphascale ASM9260
   - Marvell Armada 388
   - CSR Atlas7
   - TI Davinci DM816x
   - Hisilicon HiP01
   - ST STiH418

  There have also been some sweeping changes, including relicensing of
  DTS contents from GPL to GPLv2+/X11 so that the same files can be
  reused in other non-GPL projects more easily.  There's also been
  changes to the DT Makefile to make it a little less conflict-ridden
  and churny down the road"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits)
  ARM: dts: Add PPMU node for exynos4412-trats2
  ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
  ARM: dts: Add PPMU dt node for exynos4 and exynos4210
  ARM: dts: Add PPMU dt node for exynos3250
  ARM: dts: add mipi dsi device node for exynos4415
  ARM: dts: add fimd device node for exynos4415
  ARM: dts: Add syscon phandle to the video-phy node for Exynos4
  ARM: dts: Add sound nodes for exynos4412-trats2
  ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
  ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
  ARM: dts: Add max77693 charger node for exynos4412-trats2
  ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
  ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
  ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2
  ARM: dts: am57xx-beagle-x15: Fix USB2 mode
  ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
  ARM: dts: dra72-evm: Add extcon nodes for USB
  ARM: dts: dra7-evm: Add extcon nodes for USB
  ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
  ...

1 files changed, 12 insertions, 9 deletions

diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index c36b4dc89c13..84630e56acd7 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -48,8 +48,11 @@
  */
 
 /dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "WITS A31 Colombus Evaluation Board";
@@ -65,7 +68,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
 			vmmc-supply = <&reg_vcc3v0>;
 			bus-width = <4>;
-			cd-gpios = <&pio 0 8 0>; /* PA8 */
+			cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -81,21 +84,21 @@
 
 		pio: pinctrl@01c20800 {
 			mmc0_pins_a: mmc0@0 {
-				allwinner,pull = <1>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
 				allwinner,pins = "PA8";
 				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
 				allwinner,pins = "PH24";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -127,7 +130,7 @@
 	reg_usb2_vbus: usb2-vbus {
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb2_vbus_pin_colombus>;
-		gpio = <&pio 7 24 0>;
+		gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 };