Merge tag 'sunxi-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Pull "Allwinner DT Additions for 3.18" from Maxime Ripard:

Mostly:
  - A23 bringup ongoing
  - New boards: HSG H702, Merrii A20 Hummingbird
  - sun(4|5|7)i DMA support
  - DT relicensing to a dual GPL/X11 license

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'sunxi-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (30 commits)
  ARM: dts: sun8i: Add DMA controller node
  ARM: dts: sun5i: Add DT for HSG H702 tablet board
  ARM: dts: sunxi: Add fixed 5V regulator
  ARM: sun8i: Relicense the A23 DTSI under GPLv2/X11
  ARM: sun7i: Relicense the A20 DTSI under GPLv2/X11
  ARM: sun6i: Relicense the A31 DTSI under GPLv2/X11
  ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME
  ARM: dts: sun7i: Add Merrii A20 Hummingbird board
  ARM: dts: sun7i: Add uart3/4/5, i2c3 and spi2 pinmux
  ARM: dt: sunxi: Remove i2c controller clock-frequency that matches default
  ARM: dts: sun8i: Enable i2c controllers on ippo-q8h-v5
  ARM: dts: sun8i: Add i2c controller nodes
  ARM: dts: sun8i: Add pin-muxing info for the i2c controllers
  ARM: dts: sun8i: Enable mmc controller on ippo-q8h-v5
  ARM: dts: sun8i: Add mmc controller nodes
  ARM: dts: sun8i: Add pin-muxing info for the mmc controllers
  ARM: dts: sun8i: Add mmc clocks to the dtsi
  ARM: dts: sun8i: ippo-q8h: Add pinctrl properties for R_UART
  ARM: dts: sun8i: Add pin muxing option for R_UART
  ARM: dts: sun8i: Add pinmux set for uart0
  ...

1 files changed, 137 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
new file mode 100644
index 000000000000..1eb8175959a6
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -0,0 +1,137 @@
+/*
+ * This is based on sun4i-a10-olinuxino-lime.dts
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ * Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME";
+	compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+				allwinner,pins = "PC3";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			led_pins_olinuxinolime: led_pins@0 {
+				allwinner,pins = "PH2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <1>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 8>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a20-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 0>;
+			default-state = "on";
+		};
+	};
+
+	reg_ahci_5v: ahci-5v {
+		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+		gpio = <&pio 2 3 0>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};