Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "These changes from 30 individual branches for the most part update
  device tree files, but there are also a few source code changes that
  have crept in this time, usually in order to atomically move over a
  driver from using hardcoded data to DT probing.

  A number of platforms change their DT files to use the C preprocessor,
  which is causing a bit of churn, but that is hopefully only this once"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
  ARM: at91: dt: rm9200ek: add spi support
  ARM: at91: dt: rm9200: add spi support
  ARM: at91/DT: at91sam9n12: add SPI DMA client infos
  ARM: at91/DT: sama5d3: add SPI DMA client infos
  ARM: at91/DT: fix SPI compatibility string
  ARM: Kirkwood: Fix the internal register ranges translation
  ARM: dts: bcm281xx: change comment to C89 style
  ARM: mmc: bcm281xx SDHCI driver (dt mods)
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
  ARM: shmobile: irqpin: add a DT property to enable masking on parent
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ...

1 files changed, 32 insertions, 24 deletions

diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index ec5293758753..d9f89cd879a7 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Tegra20 Harmony evaluation board";
@@ -18,7 +18,8 @@
 			pll-supply = <&hdmi_pll_reg>;
 
 			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -262,7 +263,7 @@
 			compatible = "wlf,wm8903";
 			reg = <0x1a>;
 			interrupt-parent = <&gpio>;
-			interrupts = <187 0x04>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -290,7 +291,7 @@
 		pmic: tps6586x@34 {
 			compatible = "ti,tps6586x";
 			reg = <0x34>;
-			interrupts = <0 86 0x4>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			ti,system-power-controller;
 
@@ -434,12 +435,14 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
 	};
 
 	usb@c5008000 {
@@ -452,17 +455,17 @@
 
 	sdhci@c8000200 {
 		status = "okay";
-		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
-		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
 		bus-width = <4>;
 	};
 
 	sdhci@c8000600 {
 		status = "okay";
-		cd-gpios = <&gpio 58 1>; /* gpio PH2 */
-		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
-		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
 		bus-width = <8>;
 	};
 
@@ -484,7 +487,7 @@
 
 		power {
 			label = "Power";
-			gpios = <&gpio 170 1>; /* gpio PV2, active low */
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <116>; /* KEY_POWER */
 			gpio-key,wakeup;
 		};
@@ -627,7 +630,7 @@
 			regulator-name = "vdd_1v5";
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
-			gpio = <&pmic 0 0>;
+			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 		};
 
 		regulator@2 {
@@ -636,7 +639,7 @@
 			regulator-name = "vdd_1v2";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
-			gpio = <&pmic 1 0>;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -646,7 +649,7 @@
 			regulator-name = "vdd_1v05";
 			regulator-min-microvolt = <1050000>;
 			regulator-max-microvolt = <1050000>;
-			gpio = <&pmic 2 0>;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 			/* Hack until board-harmony-pcie.c is removed */
 			status = "disabled";
@@ -658,7 +661,7 @@
 			regulator-name = "vdd_pnl";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio 22 0>; /* gpio PC6 */
+			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -668,7 +671,7 @@
 			regulator-name = "vdd_bl";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio 176 0>; /* gpio PW0 */
+			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
@@ -691,12 +694,17 @@
 		nvidia,i2s-controller = <&tegra_i2s1>;
 		nvidia,audio-codec = <&wm8903>;
 
-		nvidia,spkr-en-gpios = <&wm8903 2 0>;
-		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
-		nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
-		nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
-
-		clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_HIGH>;
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
+			GPIO_ACTIVE_HIGH>;
+		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };