add imx6qdl-sabrelite.dtsi

2 files changed, 528 insertions, 140 deletions

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index bdcabc9f5b41..de44656ede75 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
  * The code contained herein is licensed under the GNU General Public
@@ -11,164 +11,31 @@
  */
 
 /dts-v1/;
+
 #include "imx6q.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
 
 / {
 	model = "Freescale i.MX6 Quad SABRE Lite Board";
 	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_2p5v: 2p5v {
-			compatible = "regulator-fixed";
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: usb_otg_vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
-};
-
-&ecspi1 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio3 19 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 0>;
-	status = "okay";
 };
 
-&i2c1 {
+&mxcfb1 {
 	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
-				MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x80000000
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
-			>;
-		};
-	};
 };
 
-&ssi1 {
-	fsl,mode = "i2s-slave";
+&mxcfb2 {
 	status = "okay";
 };
 
-&uart2 {
+&mxcfb3 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
 };
 
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
-	disable-over-current;
+&mxcfb4 {
 	status = "okay";
 };
 
 &sata {
 	status = "okay";
 };
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_2>;
-	cd-gpios = <&gpio7 0 0>;
-	wp-gpios = <&gpio7 1 0>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4_2>;
-	cd-gpios = <&gpio2 6 0>;
-	wp-gpios = <&gpio2 7 0>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
new file mode 100644
index 000000000000..228071a103ef
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -0,0 +1,521 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	aliases {
+		mxcfb0 = &mxcfb1;
+		mxcfb1 = &mxcfb2;
+		mxcfb2 = &mxcfb3;
+		mxcfb3 = &mxcfb4;
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_1p8v: 1p8v {
+			compatible = "regulator-fixed";
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_2p5v: 2p5v {
+			compatible = "regulator-fixed";
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: usb_otg_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 0>;
+			linux,code = <116>; /* KEY_POWER, or search */
+			gpio-key,wakeup;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 0>;
+			linux,code = <139>; /* KEY_MENU */
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 0>;
+			linux,code = <102>; /* KEY_HOME */
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 0>;
+			linux,code = <158>; /* KEY_BACK */
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 0>;
+			linux,code = <115>; /* KEY_VOLUMEUP */
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 5 0>;
+			linux,code = <114>; /* KEY_VOLUMEDOWN */
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+	sound-hdmi {
+		compatible = "fsl,imx6q-audio-hdmi",
+			     "fsl,imx-audio-hdmi";
+		model = "imx-audio-hdmi";
+		hdmi-controller = <&hdmi_audio>;
+	};
+
+	mxcfb1: fb@0 {
+		compatible = "fsl,mxc_sdc_fb";
+#if 0
+		disp_dev = "mipi_dsi";
+		interface_pix_fmt = "RGB666";
+		mode_str ="LDB-XGA";
+		default_bpp = <16>;
+		int_clk = <0>;
+		late_init = <0>;
+		status = "disabled";
+#else
+		disp_dev = "ldb";
+		interface_pix_fmt = "RGB666";
+		mode_str ="LDB-XGA";
+		default_bpp = <16>;
+		int_clk = <0>;
+		late_init = <0>;
+		status = "disabled";
+#endif
+	};
+
+	mxcfb2: fb@1 {
+		compatible = "fsl,mxc_sdc_fb";
+		disp_dev = "hdmi";
+		interface_pix_fmt = "RGB24";
+		mode_str ="1920x1080M@60";
+		default_bpp = <24>;
+		int_clk = <0>;
+		late_init = <0>;
+		status = "disabled";
+	};
+
+	mxcfb3: fb@2 {
+		compatible = "fsl,mxc_sdc_fb";
+		disp_dev = "lcd";
+		interface_pix_fmt = "RGB565";
+		mode_str ="CLAA-WVGA";
+		default_bpp = <16>;
+		int_clk = <0>;
+		late_init = <0>;
+		status = "disabled";
+	};
+
+	mxcfb4: fb@3 {
+		compatible = "fsl,mxc_sdc_fb";
+		disp_dev = "ldb";
+		interface_pix_fmt = "RGB666";
+		mode_str ="LDB-XGA";
+		default_bpp = <16>;
+		int_clk = <0>;
+		late_init = <0>;
+		status = "disabled";
+	};
+
+	lcd@0 {
+		compatible = "fsl,lcd";
+		ipu_id = <0>;
+		disp_id = <0>;
+		default_ifmt = "RGB565";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_4>;
+#if 0
+		status = "okay";
+#endif
+	};
+
+	backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	backlight_lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	v4l2_cap_0 {
+		compatible = "fsl,imx6q-v4l2-capture";
+		ipu_id = <0>;
+		csi_id = <0>;
+		mclk_source = <0>;
+		status = "okay";
+	};
+#if 0
+	v4l2_cap_1 {
+		compatible = "fsl,imx6q-v4l2-capture";
+		ipu_id = <0>;
+		csi_id = <1>;
+		mclk_source = <0>;
+		status = "okay";
+	};
+#endif
+	v4l2_out {
+		compatible = "fsl,mxc_v4l2_output";
+		status = "okay";
+	};
+
+	mipi_dsi_reset: mipi-dsi-reset {
+		compatible = "gpio-reset";
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <50>;
+		#reset-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "sst,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0xC0000>;
+			read-only;
+		};
+		partition@C0000 {
+			label = "env";
+			reg = <0xC0000 0x2000>;
+			read-only;
+		};
+		partition@C2000 {
+			label = "Kernel";
+			reg = <0xC2000 0x13e000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_4>;
+	phy-mode = "rgmii";
+#if 0
+	phy-reset-gpios = <&gpio3 23 0>;
+#endif
+	status = "okay";
+};
+
+&hdmi_audio {
+	status = "okay";
+};
+
+&hdmi_cec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec_2>;
+	status = "okay";
+};
+
+&hdmi_core {
+	ipu_id = <0>;
+	disp_id = <0>;
+	status = "okay";
+};
+
+&hdmi_video {
+	fsl,phy_reg_vlev = <0x0294>;
+	fsl,phy_reg_cksymtx = <0x800d>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_2>;
+	status = "okay";
+
+	hdmi: edid@50 {
+		compatible = "fsl,imx6-hdmi-i2c";
+		reg = <0x50>;
+	};
+#if 0
+	ov564x: ov564x@3c {
+		compatible = "ovti,ov564x";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_2>;
+		clocks = <&clks 200>;
+		clock-names = "csi_mclk";
+		DOVDD-supply = <&reg_1p8v>;
+		AVDD-supply = <&reg_2p5v>;
+		DVDD-supply = <&reg_1p8v>;
+		pwn-gpios = <&gpio1 6 1>;
+		rst-gpios = <&gpio1 8 0>;
+		ipu_id = <0>;
+		csi_id = <0>;
+		mclk = <24000000>;
+		mclk_source = <0>;
+	};
+#else
+	ov5640_mipi: ov5640_mipi@3c {
+		compatible = "ovti,ov5640_mipi";
+		reg = <0x3c>;
+		clocks = <&clks 147>;
+		clock-names = "csi_mclk";
+		DOVDD-supply = <&reg_1p8v>;
+		AVDD-supply = <&reg_2p5v>;
+		DVDD-supply = <&reg_1p8v>;
+		pwn-gpios = <&gpio6 9 1>;
+		rst-gpios = <&gpio2 5 0>;
+		ipu_id = <0>;
+		csi_id = <0>;
+		mclk = <22000000>;
+		mclk_source = <0>;
+		pwms = <&pwm3 0 45>;
+	};
+#endif
+};
+
+&i2c3 {
+        clock-frequency = <100000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2c3_3>;
+        status = "okay";
+
+        egalax_ts@04 {
+                compatible = "eeti,egalax_ts";
+                reg = <0x04>;
+                interrupt-parent = <&gpio1>;
+                interrupts = <9 2>;
+                wakeup-gpios = <&gpio1 9 0>;
+        };
+        ft5x06_ts@38 {
+		compatible = "ft5x06-ts,ft5x06-ts";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 2>;
+		wakeup-gpios = <&gpio1 9 0>;
+	};
+	tsc2004@48 {
+		compatible = "tsc2004,tsc2004";
+		reg = <0x48>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <20 2>;
+		wakeup-gpios = <&gpio4 20 0>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+
+	hog {
+		pinctrl_hog_1: hoggrp-1 {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06	0x80000000	/* uSDHC4 CD */
+				MX6QDL_PAD_NANDF_D7__GPIO2_IO07	0x80000000	/* uSDHC4 WP */
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x80000000	/* spi-nor CS */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x80000000	/* otg power en */
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23	0x80000000	/* ethernet phy reset */
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x80000000	/* USDHC3 CD */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x1f0b0		/* USDHC3 WP */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0		/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x80000000	/* CAN enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x80000000	/* CAN standby */
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x80000000	/* J7: I2C3 interrupt */
+				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20	0x1b0b0		/* tsc2004 interrupt */
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0	/* ov5640 mipi powerdown */
+				MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000b0		/* ov5640 mipi reset */
+				MX6QDL_PAD_GPIO_3__CCM_CLKO2	0x000b0		/* ov5642 mclk */
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x000b0		/* ov5642 Power Down */
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x000b0		/* ov5642 Reset */
+#if 0
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x000b0	/* ov5642 Reset */
+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x000b0		/* ov5642 Power Down */
+#endif
+			>;
+		};
+	};
+};
+
+&ldb {
+	ipu_id = <0>;
+	disp_id = <1>;
+	ext_ref = <1>;
+	mode = "sin0";
+	sec_ipu_id = <1>;
+	sec_disp_id = <1>;
+	status = "okay";
+};
+
+&mipi_dsi {
+	dev_id = <0>;
+	disp_id = <0>;
+	lcd_panel = "hitachi-1080p";
+	disp-power-on-supply = <&reg_3p3v>;
+	resets = <&mipi_dsi_reset>;
+	status = "okay";
+};
+
+&mipi_csi {
+	ipu_id = <0>;
+	csi_id = <0>;
+	v_channel = <0>;
+	lanes = <2>;
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1_1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3_2>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4_2>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_2>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	cd-gpios = <&gpio7 0 0>;
+	wp-gpios = <&gpio7 1 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4_2>;
+	cd-gpios = <&gpio2 6 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};