diff options
author | Philippe Schenker <philippe.schenker@toradex.com> | 2022-05-19 18:11:52 +0200 |
---|---|---|
committer | Philippe Schenker <philippe.schenker@toradex.com> | 2022-05-19 18:11:52 +0200 |
commit | 01a93acde83b4ee476a759e7de0df89b46130b0e (patch) | |
tree | 46218df72c9a2bef78fac3a2c469802b99f1dd0d /arch/arm/boot | |
parent | 5c1ff16e904d73f3779d18e4674f82d758c3fff1 (diff) | |
parent | 01565c91b789a1612051e735a65f11096a6f08e8 (diff) |
Merge tag 'v5.4.193' into toradex_5.4.y
This is the 5.4.193 stable release
Diffstat (limited to 'arch/arm/boot')
45 files changed, 278 insertions, 110 deletions
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S index a5983588f96b..dd53d6eb53ad 100644 --- a/arch/arm/boot/compressed/efi-header.S +++ b/arch/arm/boot/compressed/efi-header.S @@ -9,16 +9,22 @@ #include <linux/sizes.h> .macro __nop -#ifdef CONFIG_EFI_STUB - @ This is almost but not quite a NOP, since it does clobber the - @ condition flags. But it is the best we can do for EFI, since - @ PE/COFF expects the magic string "MZ" at offset 0, while the - @ ARM/Linux boot protocol expects an executable instruction - @ there. - .inst MZ_MAGIC | (0x1310 << 16) @ tstne r0, #0x4d000 -#else AR_CLASS( mov r0, r0 ) M_CLASS( nop.w ) + .endm + + .macro __initial_nops +#ifdef CONFIG_EFI_STUB + @ This is a two-instruction NOP, which happens to bear the + @ PE/COFF signature "MZ" in the first two bytes, so the kernel + @ is accepted as an EFI binary. Booting via the UEFI stub + @ will not execute those instructions, but the ARM/Linux + @ boot protocol does, so we need some NOPs here. + .inst MZ_MAGIC | (0xe225 << 16) @ eor r5, r5, 0x4d000 + eor r5, r5, 0x4d000 @ undo previous insn +#else + __nop + __nop #endif .endm diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index cbe126297f54..0a2410adc25b 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -165,7 +165,8 @@ start: * were patching the initial instructions of the kernel, i.e * had started to exploit this "patch area". */ - .rept 7 + __initial_nops + .rept 5 __nop .endr #ifndef CONFIG_THUMB2_KERNEL diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index a1fd3e63e86e..3db30ce134b9 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -160,6 +160,8 @@ /* HS USB Host PHY on PORT 1 */ hsusb1_phy: hsusb1_phy { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_rst_pins>; compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ #phy-cells = <0>; @@ -167,7 +169,9 @@ }; &davinci_emac { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_pins>; + status = "okay"; }; &davinci_mdio { @@ -192,6 +196,8 @@ }; &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; /* User DIP swithes [1:8] / User LEDS [1:2] */ tca6416: gpio@21 { @@ -204,6 +210,8 @@ }; &i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; }; @@ -222,6 +230,8 @@ }; &usbhshost { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_pins>; port1-mode = "ehci-phy"; }; @@ -230,8 +240,35 @@ }; &omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_rst_pins>; + + ethernet_pins: pinmux_ethernet_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */ + OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */ + OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */ + OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */ + OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */ + OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */ + OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */ + OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */ + OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */ + OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < @@ -299,8 +336,6 @@ }; &omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_pins>; hsusb1_pins: pinmux_hsusb1_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi index 8b669e2eafec..f7b680f6c48a 100644 --- a/arch/arm/boot/dts/am3517-som.dtsi +++ b/arch/arm/boot/dts/am3517-som.dtsi @@ -69,6 +69,8 @@ }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; s35390a: s35390a@30 { @@ -179,6 +181,13 @@ &omap3_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */ diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 669da3a33d82..5b82e58a1cf0 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -165,7 +165,7 @@ }; uart0: serial@12000 { - compatible = "marvell,armada-38x-uart"; + compatible = "marvell,armada-38x-uart", "ns16550a"; reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; @@ -175,7 +175,7 @@ }; uart1: serial@12100 { - compatible = "marvell,armada-38x-uart"; + compatible = "marvell,armada-38x-uart", "ns16550a"; reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi index 996e006e06c2..f310f4d3bcc7 100644 --- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi @@ -118,7 +118,7 @@ }; pinctrl_fwqspid_default: fwqspid_default { - function = "FWQSPID"; + function = "FWSPID"; groups = "FWQSPID"; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index bda22700110c..287566e09a67 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -217,6 +217,12 @@ wm8731: wm8731@1b { compatible = "wm8731"; reg = <0x1b>; + + /* PCK0 at 12MHz */ + clocks = <&pmc PMC_TYPE_SYSTEM 8>; + clock-names = "mclk"; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>; + assigned-clock-rates = <12000000>; }; }; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 43ff85d31dc1..5a1352fd90d1 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -77,7 +77,7 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; - mpcore@19000000 { + mpcore-bus@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -217,7 +217,7 @@ #dma-cells = <1>; }; - sdio: sdhci@21000 { + sdio: mmc@21000 { compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x21000 0x100>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index beb6c502dadc..bcad098a7fcc 100644 --- a/arch/arm/boot/dts/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -38,12 +38,26 @@ #size-cells = <0>; enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit + /* Source for d/i-cache-line-size and d/i-cache-sets + * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system + * /about-the-l1-memory-system?lang=en + * + * Source for d/i-cache-size + * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks + */ cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000d8>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; }; cpu1: cpu@1 { @@ -52,6 +66,13 @@ reg = <1>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000e0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; }; cpu2: cpu@2 { @@ -60,6 +81,13 @@ reg = <2>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000e8>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; }; cpu3: cpu@3 { @@ -68,6 +96,27 @@ reg = <3>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000f0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; + }; + + /* Source for cache-line-size + cache-sets + * https://developer.arm.com/documentation/ddi0500 + * /e/level-2-memory-system/about-the-l2-memory-system?lang=en + * Source for cache-size + * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf + */ + l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set + cache-level = <2>; }; }; }; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 50c64146d492..af81f386793c 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -183,6 +183,7 @@ interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&gpio 0 0 54>; /* Defines pin muxing groups according to * BCM2835-ARM-Peripherals.pdf page 102. diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 9711170649b6..05d67f976911 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -242,6 +242,8 @@ gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; pcie0: pcie@12000 { @@ -387,7 +389,7 @@ i2c0: i2c@18009000 { compatible = "brcm,iproc-i2c"; reg = <0x18009000 0x50>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index d31a68672bfa..d7d756614edd 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -260,7 +260,7 @@ }; uart3_data: uart3-data { - samsung,pins = "gpa1-4", "gpa1-4"; + samsung,pins = "gpa1-4", "gpa1-5"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 70a2b6e2ad3f..fa5dd992e327 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -117,6 +117,9 @@ status = "okay"; ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; }; &i2c_0 { diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 8240e5186972..fb92d87d8ded 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -132,6 +132,9 @@ hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; + vdd-supply = <&ldo6_reg>; + vdd_osc-supply = <&ldo7_reg>; + vdd_pll-supply = <&ldo6_reg>; }; &hsi2c_4 { diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index e1020e07e136..60cec653ac7c 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -84,7 +84,7 @@ partitions { compatible = "redboot-fis"; /* Eraseblock at 0xfe0000 */ - fis-index-block = <0x1fc>; + fis-index-block = <0x7f>; }; }; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 0b2701ca2921..858b8057e854 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -79,7 +79,6 @@ MX23_PAD_LCD_RESET__GPIO_1_18 MX23_PAD_PWM3__GPIO_1_29 MX23_PAD_PWM4__GPIO_1_30 - MX23_PAD_SSP1_DETECT__SSP1_DETECT >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts index 03c43c1912a7..d002c8f738b5 100644 --- a/arch/arm/boot/dts/imx53-m53menlo.dts +++ b/arch/arm/boot/dts/imx53-m53menlo.dts @@ -53,6 +53,31 @@ }; }; + lvds-decoder { + compatible = "ti,ds90cf364a", "lvds-decoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_decoder_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@1 { + reg = <1>; + + lvds_decoder_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + panel { compatible = "edt,etm0700g0dh6"; pinctrl-0 = <&pinctrl_display_gpio>; @@ -61,7 +86,7 @@ port { panel_in: endpoint { - remote-endpoint = <&lvds0_out>; + remote-endpoint = <&lvds_decoder_out>; }; }; }; @@ -450,7 +475,7 @@ reg = <2>; lvds0_out: endpoint { - remote-endpoint = <&panel_in>; + remote-endpoint = <&lvds_decoder_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index c1d41c581407..8d58817b0530 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -689,6 +689,8 @@ codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; @@ -1014,8 +1016,6 @@ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 >; }; @@ -1281,6 +1281,12 @@ >; }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 16672cbada28..6c8da3f03733 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -5,6 +5,8 @@ * Author: Fabio Estevam <fabio.estevam@freescale.com> */ +#include <dt-bindings/gpio/gpio.h> + / { aliases { backlight = &backlight; @@ -218,6 +220,7 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 >; }; @@ -290,7 +293,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - non-removable; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 2e9d5cdb1dfa..8e73065a6beb 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -69,7 +69,7 @@ reg_sd1_vmmc: regulator-sd1-vmmc { compatible = "regulator-gpio"; - gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_reg_sd>; regulator-always-on; diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h index eb025a9d4759..7328d4ef8559 100644 --- a/arch/arm/boot/dts/imx6ull-pinfunc.h +++ b/arch/arm/boot/dts/imx6ull-pinfunc.h @@ -82,6 +82,6 @@ #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0 -#define MX6ULL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0 0x0200 0x048C 0x0000 0x9 0x0 #endif /* __DTS_IMX6ULL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts index f7a841a28865..270e4986b6e6 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts @@ -11,3 +11,18 @@ model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3"; }; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index a604d92221a4..c757f0d7781c 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -11,3 +11,18 @@ model = "LogicPD Zoom DM3730 SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"; }; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index b56524cc7fe2..55b619c99e24 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -265,21 +265,6 @@ }; }; -&omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_2_pins>; - hsusb2_2_pins: pinmux_hsusb2_2_pins { - pinctrl-single,pins = < - OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ - OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ - OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ - OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ - OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ - OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ - >; - }; -}; - &uart2 { interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts index 5b7689094b70..7235ce2a3293 100644 --- a/arch/arm/boot/dts/ls1021a-tsn.dts +++ b/arch/arm/boot/dts/ls1021a-tsn.dts @@ -247,7 +247,7 @@ flash@0 { /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ - compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; + compatible = "jedec,spi-nor"; spi-max-frequency = <20000000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index c62fcca7b426..aeb8a40b6b60 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -311,39 +311,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - dspi0: spi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; @@ -984,4 +951,37 @@ }; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index c4447f6c8b2c..e141ce748484 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -49,14 +49,14 @@ }; uart_A: serial@84c0 { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x84c0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_B: serial@84dc { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x84dc 0x18>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -94,7 +94,7 @@ }; uart_C: serial@8700 { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x8700 0x18>; interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -196,7 +196,7 @@ }; uart_AO: serial@4c0 { - compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart"; reg = <0x4c0 0x18>; interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; status = "disabled"; diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi index 7f6aefd13451..e7534fe9c53c 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi @@ -29,7 +29,7 @@ compatible = "smsc,lan9221","smsc,lan9115"; bank-width = <2>; - gpmc,mux-add-data; + gpmc,mux-add-data = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <42>; gpmc,cs-wr-off-ns = <36>; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 186b2af7743e..089e9f1f442b 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -31,6 +31,8 @@ aliases { display0 = &lcd; display1 = &tv0; + /delete-property/ mmc2; + /delete-property/ mmc3; }; ldo_3v3: fixedregulator { diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi index e5da3bc6f105..218a10c0d815 100644 --- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi @@ -22,7 +22,7 @@ compatible = "smsc,lan9221","smsc,lan9115"; bank-width = <2>; - gpmc,mux-add-data; + gpmc,mux-add-data = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <42>; gpmc,cs-wr-off-ns = <36>; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 56f51599852d..338256c59ca5 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -141,7 +141,8 @@ clocks { sleep_clk: sleep_clk { compatible = "fixed-clock"; - clock-frequency = <32768>; + clock-frequency = <32000>; + clock-output-names = "gcc_sleep_clk_src"; #clock-cells = <0>; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index f2aeaccdc1ad..15ff0e8fd0d3 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -145,7 +145,9 @@ reg = <0x108000 0x1000>; qcom,ipc = <&l2cc 0x8 2>; - interrupts = <0 19 0>, <0 21 0>, <0 22 0>; + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ack", "err", "wakeup"; regulators { @@ -191,7 +193,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, <0x16400000 0x1000>; - interrupts = <0 154 0x0>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -317,7 +319,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x16080000 0x1000>; - interrupts = <0 147 0>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; spi-max-frequency = <24000000>; cs-gpios = <&msmgpio 8 0>; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 140e22d74dcf..d393bb481e74 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -635,8 +635,8 @@ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; assigned-clocks = <&cru SCLK_HDMI_PHY>; assigned-clock-parents = <&hdmi_phy>; - clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>; - clock-names = "isfr", "iahb", "cec"; + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>; + clock-names = "iahb", "isfr", "cec"; pinctrl-names = "default"; pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>; resets = <&cru SRST_HDMI_P>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 658ceb96d8bd..7dcafd0833ba 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -975,7 +975,7 @@ status = "disabled"; }; - crypto: cypto-controller@ff8a0000 { + crypto: crypto@ff8a0000 { compatible = "rockchip,rk3288-crypto"; reg = <0x0 0xff8a0000 0x0 0x4000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index b05bab57f90a..09816a2ee367 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -526,7 +526,7 @@ pmecc: ecc-engine@f8014070 { compatible = "atmel,sama5d2-pmecc"; reg = <0xf8014070 0x490>, - <0xf8014500 0x100>; + <0xf8014500 0x200>; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts index b4c0a76a4d1a..4c2fcfcc7bae 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts @@ -12,7 +12,7 @@ flash0: n25q00@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q00aa"; + compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index 90e676e7019f..1b02d46496a8 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -119,7 +119,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 6f138b2b2616..51bb436784e2 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -124,7 +124,7 @@ flash0: n25q00@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q00"; + compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; /* chip select */ spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index c155ff02eb6e..cae9ddd5ed38 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -169,7 +169,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q00"; + compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts index 8d5d3996f6f2..ca18b959e655 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -80,7 +80,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts index 99a71757cdf4..3f7aa7bf0863 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts @@ -116,7 +116,7 @@ flash0: n25q512a@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q512a"; + compatible = "micron,n25q512a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <100000000>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index a060718758b6..25874e1b9c82 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -224,7 +224,7 @@ n25q128@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q128"; + compatible = "micron,n25q128", "jedec,spi-nor"; reg = <0>; /* chip select */ spi-max-frequency = <100000000>; m25p,fast-read; @@ -241,7 +241,7 @@ n25q00@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q00"; + compatible = "micron,mt25qu02g", "jedec,spi-nor"; reg = <1>; /* chip select */ spi-max-frequency = <100000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 1a8f5e8b10e3..66cd473ecb61 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -136,9 +136,9 @@ reg = <0xb4100000 0x1000>; interrupts = <0 105 0x4>; status = "disabled"; - dmas = <&dwdma0 12 0 1>, - <&dwdma0 13 1 0>; - dma-names = "tx", "rx"; + dmas = <&dwdma0 13 0 1>, + <&dwdma0 12 1 0>; + dma-names = "rx", "tx"; }; thermal@e07008c4 { diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index f187da4485f4..78672db9068b 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -284,9 +284,9 @@ #size-cells = <0>; interrupts = <0 31 0x4>; status = "disabled"; - dmas = <&dwdma0 4 0 0>, - <&dwdma0 5 0 0>; - dma-names = "tx", "rx"; + dmas = <&dwdma0 5 0 0>, + <&dwdma0 4 0 0>; + dma-names = "rx", "tx"; }; rtc@e0580000 { diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 394a6b4dc69d..69cb65d86c46 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -183,8 +183,8 @@ }; conf_ata { nvidia,pins = "ata", "atb", "atc", "atd", "ate", - "cdev1", "cdev2", "dap1", "dtb", "gma", - "gmb", "gmc", "gmd", "gme", "gpu7", + "cdev1", "cdev2", "dap1", "dtb", "dtf", + "gma", "gmb", "gmc", "gmd", "gme", "gpu7", "gpv", "i2cp", "irrx", "irtx", "pta", "rm", "slxa", "slxk", "spia", "spib", "uac"; @@ -203,7 +203,7 @@ }; conf_crtp { nvidia,pins = "crtp", "dap2", "dap3", "dap4", - "dtc", "dte", "dtf", "gpu", "sdio1", + "dtc", "dte", "gpu", "sdio1", "slxc", "slxd", "spdi", "spdo", "spig", "uda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; |