summaryrefslogtreecommitdiff
path: root/arch/arm/boot
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-05-05 15:31:35 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-05-05 15:31:35 -0700
commitc4781a8df9566ca13bf3ac6a65f6aae8d3f6e499 (patch)
treefe8d1390f67159503c48c89a15d948f3683d9353 /arch/arm/boot
parent54176cc6803844613b3dca13174c13c47e9686db (diff)
parented19ca7fa8bd44936aa3d5284bf38f5d96a28b35 (diff)
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann: "Here are a couple last-minute fixes for ARM SoCs. Most of them are for the OMAP platforms, the rest are all for different platforms. OMAP: All dts fixes, mostly affecting voltages and pinctrl for various device drivers: - Regulator minimum voltage fixes for omap5 - ISP syscon register offset fix for omap3 - Fix regulator initial modes for n900 - Fix omap5 pinctrl wkup instance size Allwinner: Remove incorrect constraints from a dcdc1 regulator Alltera SoCFPGA: Fix compilation in thumb2 mode Samsung exynos: Fix a potential oops in the pm-domain error handling Davinci: Avoid a link error if NVMEM is disabled Renesas: Do not mark an external uart clock as disabled, to allow probing the uarts" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: davinci: only use NVMEM when available ARM: SoCFPGA: Fix secondary CPU startup in thumb2 kernel ARM: dts: omap5: fix range of permitted wakeup pinmux registers ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode ARM: dts: omap3: Fix ISP syscon register offset ARM: dts: omap5-cm-t54: fix ldo1_reg and ldo4_reg ranges ARM: dts: omap5-board-common: fix ldo1_reg and ldo4_reg ranges arm64: dts: r8a7795: Don't disable referenced optional scif clock ARM: EXYNOS: Properly skip unitialized parent clock in power domain on ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator
Diffstat (limited to 'arch/arm/boot')
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts9
-rw-r--r--arch/arm/boot/dts/omap34xx.dtsi2
-rw-r--r--arch/arm/boot/dts/omap5-board-common.dtsi4
-rw-r--r--arch/arm/boot/dts/omap5-cm-t54.dts4
-rw-r--r--arch/arm/boot/dts/omap5.dtsi2
-rw-r--r--arch/arm/boot/dts/sun8i-q8-common.dtsi2
6 files changed, 15 insertions, 8 deletions
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index b3c26a96a726..d9e2d9c6e999 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -329,6 +329,7 @@
regulator-name = "V28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
regulator-always-on; /* due to battery cover sensor */
};
@@ -336,30 +337,35 @@
regulator-name = "VCSI";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vaux3 {
regulator-name = "VMMC2_30";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vaux4 {
regulator-name = "VCAM_ANA_28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vmmc1 {
regulator-name = "VMMC1";
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <3150000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vmmc2 {
regulator-name = "V28_A";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
regulator-always-on; /* due VIO leak to AIC34 VDDs */
};
@@ -367,6 +373,7 @@
regulator-name = "VPLL";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
regulator-always-on;
};
@@ -374,6 +381,7 @@
regulator-name = "VSDI_CSI";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
regulator-always-on;
};
@@ -381,6 +389,7 @@
regulator-name = "VMMC2_IO_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vio {
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 387dc31822fe..96f8ce7bd2af 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -46,7 +46,7 @@
0x480bd800 0x017c>;
interrupts = <24>;
iommus = <&mmu_isp>;
- syscon = <&scm_conf 0xdc>;
+ syscon = <&scm_conf 0x6c>;
ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
#clock-cells = <1>;
ports {
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 902657d6713b..914bf4c47404 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -472,7 +472,7 @@
ldo1_reg: ldo1 {
/* VDDAPHY_CAM: vdda_csiport */
regulator-name = "ldo1";
- regulator-min-microvolt = <1500000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
@@ -498,7 +498,7 @@
ldo4_reg: ldo4 {
/* VDDAPHY_DISP: vdda_dsiport/hdmi */
regulator-name = "ldo4";
- regulator-min-microvolt = <1500000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index ecc591dc0778..4d87d9c6c86d 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -513,7 +513,7 @@
ldo1_reg: ldo1 {
/* VDDAPHY_CAM: vdda_csiport */
regulator-name = "ldo1";
- regulator-min-microvolt = <1500000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
@@ -537,7 +537,7 @@
ldo4_reg: ldo4 {
/* VDDAPHY_DISP: vdda_dsiport/hdmi */
regulator-name = "ldo4";
- regulator-min-microvolt = <1500000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 38805ebbe2ba..120b6b80cd39 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -269,7 +269,7 @@
omap5_pmx_wkup: pinmux@c840 {
compatible = "ti,omap5-padconf",
"pinctrl-single";
- reg = <0xc840 0x0038>;
+ reg = <0xc840 0x003c>;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi
index 9d2b7e2f5975..346a49d805a7 100644
--- a/arch/arm/boot/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi
@@ -125,8 +125,6 @@
};
&reg_dc1sw {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
regulator-name = "vcc-lcd";
};