Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "Bigger items included in this update are:

   - A series of updates from Arnd for ARM randconfig build failures
   - Updates from Dmitry for StrongARM SA-1100 to move IRQ handling to
     drivers/irqchip/
   - Move ARMs SP804 timer to drivers/clocksource/
   - Perf updates from Mark Rutland in preparation to move the ARM perf
     code into drivers/ so it can be shared with ARM64.
   - MCPM updates from Nicolas
   - Add support for taking platform serial number from DT
   - Re-implement Keystone2 physical address space switch to conform to
     architecture requirements
   - Clean up ARMv7 LPAE code, which goes in hand with the Keystone2
     changes.
   - L2C cleanups to avoid unlocking caches if we're prevented by the
     secure support to unlock.
   - Avoid cleaning a potentially dirty cache containing stale data on
     CPU initialisation
   - Add ARM-only entry point for secondary startup (for machines that
     can only call into a Thumb kernel in ARM mode).  Same thing is also
     done for the resume entry point.
   - Provide arch_irqs_disabled via asm-generic
   - Enlarge ARMv7M vector table
   - Always use BFD linker for VDSO, as gold doesn't accept some of the
     options we need.
   - Fix an incorrect BSYM (for Thumb symbols) usage, and convert all
     BSYM compiler macros to a "badr" (for branch address).
   - Shut up compiler warnings provoked by our cmpxchg() implementation.
   - Ensure bad xchg sizes fail to link"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (75 commits)
  ARM: Fix build if CLKDEV_LOOKUP is not configured
  ARM: fix new BSYM() usage introduced via for-arm-soc branch
  ARM: 8383/1: nommu: avoid deprecated source register on mov
  ARM: 8391/1: l2c: add options to overwrite prefetching behavior
  ARM: 8390/1: irqflags: Get arch_irqs_disabled from asm-generic
  ARM: 8387/1: arm/mm/dma-mapping.c: Add arm_coherent_dma_mmap
  ARM: 8388/1: tcm: Don't crash when TCM banks are protected by TrustZone
  ARM: 8384/1: VDSO: force use of BFD linker
  ARM: 8385/1: VDSO: group link options
  ARM: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations
  ARM: remove __bad_xchg definition
  ARM: 8369/1: ARMv7M: define size of vector table for Vybrid
  ARM: 8382/1: clocksource: make ARM_TIMER_SP804 depend on GENERIC_SCHED_CLOCK
  ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource
  ARM: 8365/1: introduce sp804_timer_disable and remove arm_timer.h inclusion
  ARM: 8364/1: fix BE32 module loading
  ARM: 8360/1: add secondary_startup_arm prototype in header file
  ARM: 8359/1: correct secondary_startup_arm mode
  ARM: proc-v7: sanitise and document registers around errata
  ARM: proc-v7: clean up MIDR access
  ...

1 files changed, 0 insertions, 304 deletions

diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
deleted file mode 100644
index 19211324772f..000000000000
--- a/arch/arm/common/timer-sp.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- *  linux/arch/arm/common/timer-sp.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/clk.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/sched_clock.h>
-
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/timer-sp.h>
-
-static long __init sp804_get_clock_rate(struct clk *clk)
-{
-	long rate;
-	int err;
-
-	err = clk_prepare(clk);
-	if (err) {
-		pr_err("sp804: clock failed to prepare: %d\n", err);
-		clk_put(clk);
-		return err;
-	}
-
-	err = clk_enable(clk);
-	if (err) {
-		pr_err("sp804: clock failed to enable: %d\n", err);
-		clk_unprepare(clk);
-		clk_put(clk);
-		return err;
-	}
-
-	rate = clk_get_rate(clk);
-	if (rate < 0) {
-		pr_err("sp804: clock failed to get rate: %ld\n", rate);
-		clk_disable(clk);
-		clk_unprepare(clk);
-		clk_put(clk);
-	}
-
-	return rate;
-}
-
-static void __iomem *sched_clock_base;
-
-static u64 notrace sp804_read(void)
-{
-	return ~readl_relaxed(sched_clock_base + TIMER_VALUE);
-}
-
-void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
-						     const char *name,
-						     struct clk *clk,
-						     int use_sched_clock)
-{
-	long rate;
-
-	if (!clk) {
-		clk = clk_get_sys("sp804", name);
-		if (IS_ERR(clk)) {
-			pr_err("sp804: clock not found: %d\n",
-			       (int)PTR_ERR(clk));
-			return;
-		}
-	}
-
-	rate = sp804_get_clock_rate(clk);
-
-	if (rate < 0)
-		return;
-
-	/* setup timer 0 as free-running clocksource */
-	writel(0, base + TIMER_CTRL);
-	writel(0xffffffff, base + TIMER_LOAD);
-	writel(0xffffffff, base + TIMER_VALUE);
-	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-		base + TIMER_CTRL);
-
-	clocksource_mmio_init(base + TIMER_VALUE, name,
-		rate, 200, 32, clocksource_mmio_readl_down);
-
-	if (use_sched_clock) {
-		sched_clock_base = base;
-		sched_clock_register(sp804_read, 32, rate);
-	}
-}
-
-
-static void __iomem *clkevt_base;
-static unsigned long clkevt_reload;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	/* clear the interrupt */
-	writel(1, clkevt_base + TIMER_INTCLR);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static void sp804_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *evt)
-{
-	unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE;
-
-	writel(ctrl, clkevt_base + TIMER_CTRL);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel(clkevt_reload, clkevt_base + TIMER_LOAD);
-		ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl |= TIMER_CTRL_ONESHOT;
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		break;
-	}
-
-	writel(ctrl, clkevt_base + TIMER_CTRL);
-}
-
-static int sp804_set_next_event(unsigned long next,
-	struct clock_event_device *evt)
-{
-	unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
-
-	writel(next, clkevt_base + TIMER_LOAD);
-	writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
-
-	return 0;
-}
-
-static struct clock_event_device sp804_clockevent = {
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
-		CLOCK_EVT_FEAT_DYNIRQ,
-	.set_mode	= sp804_set_mode,
-	.set_next_event	= sp804_set_next_event,
-	.rating		= 300,
-};
-
-static struct irqaction sp804_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= sp804_timer_interrupt,
-	.dev_id		= &sp804_clockevent,
-};
-
-void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
-{
-	struct clock_event_device *evt = &sp804_clockevent;
-	long rate;
-
-	if (!clk)
-		clk = clk_get_sys("sp804", name);
-	if (IS_ERR(clk)) {
-		pr_err("sp804: %s clock not found: %d\n", name,
-			(int)PTR_ERR(clk));
-		return;
-	}
-
-	rate = sp804_get_clock_rate(clk);
-	if (rate < 0)
-		return;
-
-	clkevt_base = base;
-	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
-	evt->name = name;
-	evt->irq = irq;
-	evt->cpumask = cpu_possible_mask;
-
-	writel(0, base + TIMER_CTRL);
-
-	setup_irq(irq, &sp804_timer_irq);
-	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
-}
-
-static void __init sp804_of_init(struct device_node *np)
-{
-	static bool initialized = false;
-	void __iomem *base;
-	int irq;
-	u32 irq_num = 0;
-	struct clk *clk1, *clk2;
-	const char *name = of_get_property(np, "compatible", NULL);
-
-	base = of_iomap(np, 0);
-	if (WARN_ON(!base))
-		return;
-
-	/* Ensure timers are disabled */
-	writel(0, base + TIMER_CTRL);
-	writel(0, base + TIMER_2_BASE + TIMER_CTRL);
-
-	if (initialized || !of_device_is_available(np))
-		goto err;
-
-	clk1 = of_clk_get(np, 0);
-	if (IS_ERR(clk1))
-		clk1 = NULL;
-
-	/* Get the 2nd clock if the timer has 3 timer clocks */
-	if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) {
-		clk2 = of_clk_get(np, 1);
-		if (IS_ERR(clk2)) {
-			pr_err("sp804: %s clock not found: %d\n", np->name,
-				(int)PTR_ERR(clk2));
-			clk2 = NULL;
-		}
-	} else
-		clk2 = clk1;
-
-	irq = irq_of_parse_and_map(np, 0);
-	if (irq <= 0)
-		goto err;
-
-	of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
-	if (irq_num == 2) {
-		__sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
-		__sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
-	} else {
-		__sp804_clockevents_init(base, irq, clk1 , name);
-		__sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
-							 name, clk2, 1);
-	}
-	initialized = true;
-
-	return;
-err:
-	iounmap(base);
-}
-CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
-
-static void __init integrator_cp_of_init(struct device_node *np)
-{
-	static int init_count = 0;
-	void __iomem *base;
-	int irq;
-	const char *name = of_get_property(np, "compatible", NULL);
-	struct clk *clk;
-
-	base = of_iomap(np, 0);
-	if (WARN_ON(!base))
-		return;
-	clk = of_clk_get(np, 0);
-	if (WARN_ON(IS_ERR(clk)))
-		return;
-
-	/* Ensure timer is disabled */
-	writel(0, base + TIMER_CTRL);
-
-	if (init_count == 2 || !of_device_is_available(np))
-		goto err;
-
-	if (!init_count)
-		__sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
-	else {
-		irq = irq_of_parse_and_map(np, 0);
-		if (irq <= 0)
-			goto err;
-
-		__sp804_clockevents_init(base, irq, clk, name);
-	}
-
-	init_count++;
-	return;
-err:
-	iounmap(base);
-}
-CLOCKSOURCE_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init);