[ARM] spelling fixes

Spelling fixes in arch/arm/.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

4 files changed, 8 insertions, 8 deletions

diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 6fbe7722aa44..b36b1e8a105d 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -6,7 +6,7 @@
  *  copy data to/from buffers located outside the DMA region. This
  *  only works for systems in which DMA memory is at the bottom of
  *  RAM, the remainder of memory is at the top and the DMA memory
- *  can be marked as ZONE_DMA. Anything beyond that such as discontigous
+ *  can be marked as ZONE_DMA. Anything beyond that such as discontiguous
  *  DMA windows will require custom implementations that reserve memory
  *  areas at early bootup.
  *
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 2ae0bd1c907d..0c89bd35e06f 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -72,7 +72,7 @@ static inline unsigned int gic_irq(unsigned int irq)
  * unmask it, in the same way we need to unmask an interrupt when
  * we first enable it.
  *
- * The GIC has a seperate notion of "end of interrupt" to re-enable
+ * The GIC has a separate notion of "end of interrupt" to re-enable
  * an interrupt after handling, in order to support hardware
  * prioritisation.
  *
diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
index c94864c5b1af..aad4d94ba8f5 100644
--- a/arch/arm/common/sharpsl_param.c
+++ b/arch/arm/common/sharpsl_param.c
@@ -20,7 +20,7 @@
  * typically including LCD parameters are loaded by the bootloader at the
  * address PARAM_BASE. As the kernel will overwrite them, we need to store
  * them early in the boot process, then pass them to the appropriate drivers.
- * Not all devices use all paramaters but the format is common to all.
+ * Not all devices use all parameters but the format is common to all.
  */
 #ifdef CONFIG_ARCH_SA1100
 #define PARAM_BASE	0xe8ffc000
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index c8e78d96e592..3bf3a927ae22 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -291,7 +291,7 @@ static void sharpsl_chrg_full_timer(unsigned long data)
 }
 
 /* Charging Finished Interrupt (Not present on Corgi) */
-/* Can trigger at the same time as an AC staus change so
+/* Can trigger at the same time as an AC status change so
    delay until after that has been processed */
 irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
 {
@@ -635,7 +635,7 @@ static int sharpsl_fatal_check(void)
 
 static int sharpsl_off_charge_error(void)
 {
-	dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n");
+	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
 	sharpsl_pm.machinfo->charge(0);
 	sharpsl_pm_led(SHARPSL_LED_ERROR);
 	sharpsl_pm.charge_mode = CHRG_ERROR;
@@ -691,14 +691,14 @@ static int sharpsl_off_charge_battery(void)
 
 		time = RCNR;
 		while(1) {
-			/* Check if any wakeup event had occured */
+			/* Check if any wakeup event had occurred */
 			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
 				return 0;
 			/* Check for timeout */
 			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
 				return 1;
 			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n");
+				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
 	   			sharpsl_pm.full_count++;
 				sharpsl_pm.machinfo->charge(0);
 				mdelay(SHARPSL_CHARGE_WAIT_TIME);
@@ -714,7 +714,7 @@ static int sharpsl_off_charge_battery(void)
 
 	time = RCNR;
 	while(1) {
-		/* Check if any wakeup event had occured */
+		/* Check if any wakeup event had occurred */
 		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
 			return 0;
 		/* Check for timeout */