ARM: replace BSYM() with badr assembly macro

BSYM() was invented to allow us to work around a problem with the
assembler, where local symbols resolved by the assembler for the 'adr'
instruction did not take account of their ISA.

Since we don't want BSYM() used elsewhere, replace BSYM() with a new
macro 'badr', which is like the 'adr' pseudo-op, but with the BSYM()
mechanics integrated into it.  This ensures that the BSYM()-ification
is only used in conjunction with 'adr'.

Acked-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

6 files changed, 18 insertions, 18 deletions

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 570306c49406..f8f7398c74c2 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -40,7 +40,7 @@
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	ldr	r1, =handle_arch_irq
 	mov	r0, sp
-	adr	lr, BSYM(9997f)
+	badr	lr, 9997f
 	ldr	pc, [r1]
 #else
 	arch_irq_handler_default
@@ -273,7 +273,7 @@ __und_svc:
 	str	r4, [sp, #S_PC]
 	orr	r0, r9, r0, lsl #16
 #endif
-	adr	r9, BSYM(__und_svc_finish)
+	badr	r9, __und_svc_finish
 	mov	r2, r4
 	bl	call_fpe
 
@@ -469,7 +469,7 @@ __und_usr:
 	@ instruction, or the more conventional lr if we are to treat
 	@ this as a real undefined instruction
 	@
-	adr	r9, BSYM(ret_from_exception)
+	badr	r9, ret_from_exception
 
 	@ IRQs must be enabled before attempting to read the instruction from
 	@ user space since that could cause a page/translation fault if the
@@ -486,7 +486,7 @@ __und_usr:
 	@ r2 = PC value for the following instruction (:= regs->ARM_pc)
 	@ r4 = PC value for the faulting instruction
 	@ lr = 32-bit undefined instruction function
-	adr	lr, BSYM(__und_usr_fault_32)
+	badr	lr, __und_usr_fault_32
 	b	call_fpe
 
 __und_usr_thumb:
@@ -522,7 +522,7 @@ ARM_BE8(rev16	r0, r0)				@ little endian instruction
 	add	r2, r2, #2			@ r2 is PC + 2, make it PC + 4
 	str	r2, [sp, #S_PC]			@ it's a 2x16bit instr, update
 	orr	r0, r0, r5, lsl #16
-	adr	lr, BSYM(__und_usr_fault_32)
+	badr	lr, __und_usr_fault_32
 	@ r0 = the two 16-bit Thumb instructions which caused the exception
 	@ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc)
 	@ r4 = PC value for the first 16-bit Thumb instruction
@@ -716,7 +716,7 @@ __und_usr_fault_32:
 __und_usr_fault_16:
 	mov	r1, #2
 1:	mov	r0, sp
-	adr	lr, BSYM(ret_from_exception)
+	badr	lr, ret_from_exception
 	b	__und_fault
 ENDPROC(__und_usr_fault_32)
 ENDPROC(__und_usr_fault_16)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index f8ccc21fa032..6ab159384667 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -88,7 +88,7 @@ ENTRY(ret_from_fork)
 	bl	schedule_tail
 	cmp	r5, #0
 	movne	r0, r4
-	adrne	lr, BSYM(1f)
+	badrne	lr, 1f
 	retne	r5
 1:	get_thread_info tsk
 	b	ret_slow_syscall
@@ -196,7 +196,7 @@ local_restart:
 	bne	__sys_trace
 
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
-	adr	lr, BSYM(ret_fast_syscall)	@ return address
+	badr	lr, ret_fast_syscall		@ return address
 	ldrcc	pc, [tbl, scno, lsl #2]		@ call sys_* routine
 
 	add	r1, sp, #S_OFF
@@ -231,7 +231,7 @@ __sys_trace:
 	add	r0, sp, #S_OFF
 	bl	syscall_trace_enter
 
-	adr	lr, BSYM(__sys_trace_return)	@ return address
+	badr	lr, __sys_trace_return		@ return address
 	mov	scno, r0			@ syscall number (possibly new)
 	add	r1, sp, #S_R0 + S_OFF		@ pointer to regs
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S
index fe57c73e70a4..c73c4030ca5d 100644
--- a/arch/arm/kernel/entry-ftrace.S
+++ b/arch/arm/kernel/entry-ftrace.S
@@ -87,7 +87,7 @@
 
 1: 	mcount_get_lr	r1			@ lr of instrumented func
 	mcount_adjust_addr	r0, lr		@ instrumented function
-	adr	lr, BSYM(2f)
+	badr	lr, 2f
 	mov	pc, r2
 2:	mcount_exit
 .endm
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index aebfbf79a1a3..b6f3cb6333e4 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -46,7 +46,7 @@ ENTRY(stext)
 	.arm
 ENTRY(stext)
 
- THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
+ THUMB(	badr	r9, 1f		)	@ Kernel is always entered in ARM.
  THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
  THUMB(	.thumb			)	@ switch to Thumb now.
  THUMB(1:			)
@@ -79,7 +79,7 @@ ENTRY(stext)
 #endif
 	ldr	r13, =__mmap_switched		@ address to jump to after
 						@ initialising sctlr
-	adr	lr, BSYM(1f)			@ return (PIC) address
+	badr	lr, 1f				@ return (PIC) address
 	ldr	r12, [r10, #PROCINFO_INITFUNC]
 	add	r12, r12, r10
 	ret	r12
@@ -115,7 +115,7 @@ ENTRY(secondary_startup)
 	bl      __setup_mpu			@ Initialize the MPU
 #endif
 
-	adr	lr, BSYM(__after_proc_init)	@ return address
+	badr	lr, __after_proc_init		@ return address
 	mov	r13, r12			@ __secondary_switched address
 	ldr	r12, [r10, #PROCINFO_INITFUNC]
 	add	r12, r12, r10
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 3637973a9708..ab3c478aaced 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -80,7 +80,7 @@
 ENTRY(stext)
  ARM_BE8(setend	be )			@ ensure we are in BE8 mode
 
- THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
+ THUMB(	badr	r9, 1f		)	@ Kernel is always entered in ARM.
  THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
  THUMB(	.thumb			)	@ switch to Thumb now.
  THUMB(1:			)
@@ -136,7 +136,7 @@ ENTRY(stext)
 	 */
 	ldr	r13, =__mmap_switched		@ address to jump to after
 						@ mmu has been enabled
-	adr	lr, BSYM(1f)			@ return (PIC) address
+	badr	lr, 1f				@ return (PIC) address
 	mov	r8, r4				@ set TTBR1 to swapper_pg_dir
 	ldr	r12, [r10, #PROCINFO_INITFUNC]
 	add	r12, r12, r10
@@ -348,7 +348,7 @@ __turn_mmu_on_loc:
 	.text
 ENTRY(secondary_startup_arm)
 	.arm
- THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is entered in ARM.
+ THUMB(	badr	r9, 1f		)	@ Kernel is entered in ARM.
  THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
  THUMB(	.thumb			)	@ switch to Thumb now.
  THUMB(1:			)
@@ -384,7 +384,7 @@ ENTRY(secondary_startup)
 	ldr	r4, [r7, lr]			@ get secondary_data.pgdir
 	add	r7, r7, #4
 	ldr	r8, [r7, lr]			@ get secondary_data.swapper_pg_dir
-	adr	lr, BSYM(__enable_mmu)		@ return address
+	badr	lr, __enable_mmu		@ return address
 	mov	r13, r12			@ __secondary_switched address
 	ldr	r12, [r10, #PROCINFO_INITFUNC]
 	add	r12, r12, r10			@ initialise processor
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index 7d37bfc50830..76bb3128e135 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -81,7 +81,7 @@ ENTRY(__cpu_suspend)
 	mov	r1, r4			@ size of save block
 	add	r0, sp, #8		@ pointer to save block
 	bl	__cpu_suspend_save
-	adr	lr, BSYM(cpu_suspend_abort)
+	badr	lr, cpu_suspend_abort
 	ldmfd	sp!, {r0, pc}		@ call suspend fn
 ENDPROC(__cpu_suspend)
 	.ltorg