ARM: at91: move non DT Kconfig to Kconfig.non_dt

This is the legacy platform support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

1 files changed, 399 insertions, 0 deletions

diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
new file mode 100644
index 000000000000..6c24985515a2
--- /dev/null
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -0,0 +1,399 @@
+menu "Atmel Non-DT world"
+
+config HAVE_AT91_DATAFLASH_CARD
+	bool
+
+choice
+	prompt "Atmel AT91 Processor Devices for non DT boards"
+
+config ARCH_AT91_NONE
+	bool "None"
+
+config ARCH_AT91RM9200
+	bool "AT91RM9200"
+	select SOC_AT91RM9200
+
+config ARCH_AT91SAM9260
+	bool "AT91SAM9260 or AT91SAM9XE"
+	select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9261
+	bool "AT91SAM9261"
+	select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9G10
+	bool "AT91SAM9G10"
+	select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9263
+	bool "AT91SAM9263"
+	select SOC_AT91SAM9263
+
+config ARCH_AT91SAM9RL
+	bool "AT91SAM9RL"
+	select SOC_AT91SAM9RL
+
+config ARCH_AT91SAM9G20
+	bool "AT91SAM9G20"
+	select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9G45
+	bool "AT91SAM9G45"
+	select SOC_AT91SAM9G45
+
+config ARCH_AT91X40
+	bool "AT91x40"
+	depends on !MMU
+	select ARCH_USES_GETTIMEOFFSET
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+
+endchoice
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
+
+comment "AT91RM9200 Board Type"
+
+config MACH_ONEARM
+	bool "Ajeco 1ARM Single Board Computer"
+	help
+	  Select this if you are using Ajeco's 1ARM Single Board Computer.
+	  <http://www.ajeco.fi/>
+
+config ARCH_AT91RM9200DK
+	bool "Atmel AT91RM9200-DK Development board"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91RM9200-DK Development board.
+	  (Discontinued)
+
+config MACH_AT91RM9200EK
+	bool "Atmel AT91RM9200-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
+
+config MACH_CSB337
+	bool "Cogent CSB337"
+	help
+	  Select this if you are using Cogent's CSB337 board.
+	  <http://www.cogcomp.com/csb_csb337.htm>
+
+config MACH_CSB637
+	bool "Cogent CSB637"
+	help
+	  Select this if you are using Cogent's CSB637 board.
+	  <http://www.cogcomp.com/csb_csb637.htm>
+
+config MACH_CARMEVA
+	bool "Conitec ARM&EVA"
+	help
+	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
+	  <http://www.conitec.net/english/linuxboard.php>
+
+config MACH_ATEB9200
+	bool "Embest ATEB9200"
+	help
+	  Select this if you are using Embest's ATEB9200 board.
+	  <http://www.embedinfo.com/english/product/ATEB9200.asp>
+
+config MACH_KB9200
+	bool "KwikByte KB920x"
+	help
+	  Select this if you are using KwikByte's KB920x board.
+	  <http://www.kwikbyte.com/KB9202.html>
+
+config MACH_PICOTUX2XX
+	bool "picotux 200"
+	help
+	  Select this if you are using a picotux 200.
+	  <http://www.picotux.com/>
+
+config MACH_KAFA
+	bool "Sperry-Sun KAFA board"
+	help
+	  Select this if you are using Sperry-Sun's KAFA board.
+
+config MACH_ECBAT91
+	bool "emQbit ECB_AT91 SBC"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using emQbit's ECB_AT91 board.
+	  <http://wiki.emqbit.com/free-ecb-at91>
+
+config MACH_YL9200
+	bool "ucDragon YL-9200"
+	help
+	  Select this if you are using the ucDragon YL-9200 board.
+
+config MACH_CPUAT91
+	bool "Eukrea CPUAT91"
+	help
+	  Select this if you are using the Eukrea Electromatique's
+	  CPUAT91 board <http://www.eukrea.com/>.
+
+config MACH_ECO920
+	bool "eco920"
+	help
+	  Select this if you are using the eco920 board
+
+config MACH_RSI_EWS
+	bool "RSI Embedded Webserver"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using RSIs EWS board.
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Variants"
+
+comment "AT91SAM9260 / AT91SAM9XE Board Type"
+
+config MACH_AT91SAM9260EK
+	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
+config MACH_CAM60
+	bool "KwikByte KB9260 (CAM60) board"
+	help
+	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
+	  <http://www.kwikbyte.com/KB9260.html>
+
+config MACH_SAM9_L9260
+	bool "Olimex SAM9-L9260 board"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
+	  <http://www.olimex.com/dev/sam9-L9260.html>
+
+config MACH_AFEB9260
+	bool "Custom afeb9260 board v1"
+	help
+	  Select this if you are using custom afeb9260 board based on
+	  open hardware design. Select this for revision 1 of the board.
+	  <svn://194.85.238.22/home/users/george/svn/arm9eb>
+	  <http://groups.google.com/group/arm9fpga-evolution-board>
+
+config MACH_USB_A9260
+	bool "CALAO USB-A9260"
+	help
+	  Select this if you are using a Calao Systems USB-A9260.
+	  <http://www.calao-systems.com>
+
+config MACH_QIL_A9260
+	bool "CALAO QIL-A9260 board"
+	help
+	  Select this if you are using a Calao Systems QIL-A9260 Board.
+	  <http://www.calao-systems.com>
+
+config MACH_CPU9260
+	bool "Eukrea CPU9260 board"
+	help
+	  Select this if you are using a Eukrea Electromatique's
+	  CPU9260 Board <http://www.eukrea.com/>
+
+config MACH_FLEXIBITY
+	bool "Flexibity Connect board"
+	help
+	  Select this if you are using Flexibity Connect board
+	  <http://www.flexibity.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+config MACH_AT91SAM9261EK
+	bool "Atmel AT91SAM9261-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+	bool "Atmel AT91SAM9263-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+config MACH_USB_A9263
+	bool "CALAO USB-A9263"
+	help
+	  Select this if you are using a Calao Systems USB-A9263.
+	  <http://www.calao-systems.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9RL
+
+comment "AT91SAM9RL Board Type"
+
+config MACH_AT91SAM9RLEK
+	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
+	help
+	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G20
+
+comment "AT91SAM9G20 Board Type"
+
+config MACH_AT91SAM9G20EK
+	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+	  that embeds only one SD/MMC slot.
+
+config MACH_AT91SAM9G20EK_2MMC
+	depends on MACH_AT91SAM9G20EK
+	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+	help
+	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+	  onwards.
+	  <http://www.atmel.com/tools/SAM9G20-EK.aspx>
+
+config MACH_CPU9G20
+	bool "Eukrea CPU9G20 board"
+	help
+	  Select this if you are using a Eukrea Electromatique's
+	  CPU9G20 Board <http://www.eukrea.com/>
+
+config MACH_ACMENETUSFOXG20
+	bool "Acme Systems srl FOX Board G20"
+	help
+	  Select this if you are using Acme Systems
+	  FOX Board G20 <http://www.acmesystems.it>
+
+config MACH_PORTUXG20
+	bool "taskit PortuxG20"
+	help
+	  Select this if you are using taskit's PortuxG20.
+	  <http://www.taskit.de/en/>
+
+config MACH_STAMP9G20
+	bool "taskit Stamp9G20 CPU module"
+	help
+	  Select this if you are using taskit's Stamp9G20 CPU module on its
+	  evaluation board.
+	  <http://www.taskit.de/en/>
+
+config MACH_PCONTROL_G20
+	bool "PControl G20 CPU module"
+	help
+	  Select this if you are using taskit's Stamp9G20 CPU module on this
+	  carrier board, beeing the decentralized unit of a building automation
+	  system; featuring nvram, eth-switch, iso-rs485, display, io
+
+config MACH_GSIA18S
+	bool "GS_IA18_S board"
+	help
+	  This enables support for the GS_IA18_S board
+	  produced by GeoSIG Ltd company. This is an internet accelerograph.
+	  <http://www.geosig.com>
+
+config MACH_USB_A9G20
+	bool "CALAO USB-A9G20"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using a Calao Systems USB-A9G20.
+	  <http://www.calao-systems.com>
+
+endif
+
+if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+comment "AT91SAM9260/AT91SAM9G20 boards"
+
+config MACH_SNAPPER_9260
+        bool "Bluewater Systems Snapper 9260/9G20 module"
+        help
+          Select this if you are using the Bluewater Systems Snapper 9260 or
+          Snapper 9G20 modules.
+          <http://www.bluewatersys.com/>
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G45
+
+comment "AT91SAM9G45 Board Type"
+
+config MACH_AT91SAM9M10G45EK
+	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
+	help
+	  Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
+	  Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
+	  families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+	  <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91X40
+
+comment "AT91X40 Board Type"
+
+config MACH_AT91EB01
+	bool "Atmel AT91EB01 Evaluation Kit"
+	help
+	  Select this if you are using Atmel's AT91EB01 Evaluation Kit.
+	  It is also a popular target for simulators such as GDB's
+	  ARM simulator (commonly known as the ARMulator) and the
+	  Skyeye simulator.
+
+endif
+
+# ----------------------------------------------------------
+
+comment "AT91 Board Options"
+
+config MTD_AT91_DATAFLASH_CARD
+	bool "Enable DataFlash Card support"
+	depends on HAVE_AT91_DATAFLASH_CARD
+	help
+	  Enable support for the DataFlash card.
+
+endmenu