Merge tag 'at91-3.5-cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup

Nicolas Ferre <nicolas.ferre@atmel.com> writes:
 First batch of AT91 cleanup for 3.5 kernel.
 - The biggest improvement of this series is the ability to compile several
   AT91 SoCs in one kernel image.
   For now on it's limited to the DT-enabled boards but we can compile all
   the core together.
 - The Kconfig series is stacked before other patches as it is simple and
   non-intrusive. Its goal is to remove too restrictive dependencies on
   SoC names. This will allow to add support for newer SoC seamlessly.
 - Some very "cosmetic" Kconfig changes are also added (entry names,
   comments, etc.).

* tag 'at91-3.5-cleanup' of git://github.com/at91linux/linux-at91: (19 commits)
  ARM: at91: add defconfig for device tree
  ARM: at91/dt: do not specify the board any more
  ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support
  ARM: at91: add SOC_AT91SAM9 kconfig option to factorise select
  ARM: at91: pm select memory controler at runtime
  ARM: at91: move at91_init_leds to board init
  ARM: at91: do not pin mux the UARTs in init_early
  ARM: at91: drop at91_set_serial_console
  ARM: at91: uncompress: autodetect the uart to use
  ARM: at91: uncompress Store UART address in a variable
  hwrng: Kconfig: remove dependency for atmel-rng driver
  Input: Kconfig: remove dependency for atmel_tsadcc driver
  rtc: Kconfig: remove dependency for AT91 rtc driver
  ARM: at91/Kconfig: website link for AT91SAM9G20-EK
  ARM: at91/Kconfig: add AT91SAM9x5 family to AT91_EARLY_DBGU0 entry
  ARM: at91/Kconfig: add clarifications to AT91SAM9M10G45-EK entry
  ARM: at91/Kconfig: add comment to at91sam9x5 family entry
  ARM: at91/Kconfig: change at91sam9g45 entry
  ARM: at91: change AT91 Kconfig entry comment

Also updates the cleanup branch to v3.4-rc3.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 8 insertions, 12 deletions

diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index efde1b2327c8..f260657f32bc 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -47,18 +47,6 @@ static void __init kafa_init_early(void)
 
 	/* Initialize processor: 18.432 MHz crystal */
 	at91_initialize(18432000);
-
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static struct macb_platform_data __initdata kafa_eth_data = {
@@ -79,7 +67,15 @@ static struct at91_udc_data __initdata kafa_udc_data = {
 
 static void __init kafa_board_init(void)
 {
+	/* Set up the LEDs */
+	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
+
 	/* Serial */
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
 	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&kafa_eth_data);