Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull part one of ARM SoC updates from Olof Johansson:
 "A quite large set of SoC updates this cycle.  In no particular order:

   - Multi-cluster power management for Samsung Exynos, adding support
     for big.LITTLE CPU switching on EXYNOS5

   - SMP support for Marvell Armada 375 and 38x

   - SMP rework on Allwinner A31

   - Xilinx Zynq support for SOC_BUS, big endian

   - Marvell orion5x platform cleanup, modernizing the implementation
     and moving to DT.

   - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
     that their platform can be enabled in the same kernel binary as
     most of the other v7 platforms in the tree.  \o/

     The work isn't quite complete, there's some driver fixes still
     needed, but the basics now work.

  New SoC support added:

   - Freescale i.MX6SX

   - LSI Axxia AXM55xx SoCs

   - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800

   - STi STIH407

  plus a large set of various smaller updates for different platforms.
  I'm probably missing some important one here"

* tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits)
  ARM: exynos: don't run exynos4 l2x0 setup on other platforms
  ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
  ARM: EXYNOS: mcpm rename the power_down_finish
  ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
  ARM: EXYNOS: Enable multi-platform build support
  ARM: EXYNOS: Consolidate Kconfig entries
  ARM: EXYNOS: Add support for EXYNOS5410 SoC
  ARM: EXYNOS: Support secondary CPU boot of Exynos3250
  ARM: EXYNOS: Add Exynos3250 SoC ID
  ARM: EXYNOS: Add 5800 SoC support
  ARM: EXYNOS: initial board support for exynos5260 SoC
  clk: exynos5410: register clocks using common clock framework
  ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
  ARM: sunxi: allow building without reset controller
  Documentation: devicetree: arm: sort enable-method entries
  ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE
  clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
  ARM: dts: axxia: Add reset controller
  power: reset: Add Axxia system reset driver
  ARM: axxia: Adding defconfig for AXM55xx
  ...

4 files changed, 135 insertions, 0 deletions

diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig
new file mode 100644
index 000000000000..8be7e0ae1922
--- /dev/null
+++ b/arch/arm/mach-axxia/Kconfig
@@ -0,0 +1,16 @@
+config ARCH_AXXIA
+	bool "LSI Axxia platforms" if (ARCH_MULTI_V7 && ARM_LPAE)
+	select ARCH_DMA_ADDR_T_64BIT
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_TIMER_SP804
+	select HAVE_ARM_ARCH_TIMER
+	select MFD_SYSCON
+	select MIGHT_HAVE_PCI
+	select PCI_DOMAINS if PCI
+	select ZONE_DMA
+	help
+	  This enables support for the LSI Axxia devices.
+
+	  The LSI Axxia platforms require a Flattened Device Tree to be passed
+	  to the kernel.
diff --git a/arch/arm/mach-axxia/Makefile b/arch/arm/mach-axxia/Makefile
new file mode 100644
index 000000000000..ec4f68b460c6
--- /dev/null
+++ b/arch/arm/mach-axxia/Makefile
@@ -0,0 +1,2 @@
+obj-y				+= axxia.o
+obj-$(CONFIG_SMP)		+= platsmp.o
diff --git a/arch/arm/mach-axxia/axxia.c b/arch/arm/mach-axxia/axxia.c
new file mode 100644
index 000000000000..19e5a1d95397
--- /dev/null
+++ b/arch/arm/mach-axxia/axxia.c
@@ -0,0 +1,28 @@
+/*
+ * Support for the LSI Axxia SoC devices based on ARM cores.
+ *
+ * Copyright (C) 2012 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <asm/mach/arch.h>
+
+static const char *axxia_dt_match[] __initconst = {
+	"lsi,axm5516",
+	"lsi,axm5516-sim",
+	"lsi,axm5516-emu",
+	NULL
+};
+
+DT_MACHINE_START(AXXIA_DT, "LSI Axxia AXM55XX")
+	.dt_compat = axxia_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c
new file mode 100644
index 000000000000..959d4df3d2b6
--- /dev/null
+++ b/arch/arm/mach-axxia/platsmp.c
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/arm/mach-axxia/platsmp.c
+ *
+ * Copyright (C) 2012 LSI Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/cacheflush.h>
+
+/* Syscon register offsets for releasing cores from reset */
+#define SC_CRIT_WRITE_KEY	0x1000
+#define SC_RST_CPU_HOLD		0x1010
+
+/*
+ * Write the kernel entry point for secondary CPUs to the specified address
+ */
+static void write_release_addr(u32 release_phys)
+{
+	u32 *virt = (u32 *) phys_to_virt(release_phys);
+	writel_relaxed(virt_to_phys(secondary_startup), virt);
+	/* Make sure this store is visible to other CPUs */
+	smp_wmb();
+	__cpuc_flush_dcache_area(virt, sizeof(u32));
+}
+
+static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	struct device_node *syscon_np;
+	void __iomem *syscon;
+	u32 tmp;
+
+	syscon_np = of_find_compatible_node(NULL, NULL, "lsi,axxia-syscon");
+	if (!syscon_np)
+		return -ENOENT;
+
+	syscon = of_iomap(syscon_np, 0);
+	if (!syscon)
+		return -ENOMEM;
+
+	tmp = readl(syscon + SC_RST_CPU_HOLD);
+	writel(0xab, syscon + SC_CRIT_WRITE_KEY);
+	tmp &= ~(1 << cpu);
+	writel(tmp, syscon + SC_RST_CPU_HOLD);
+
+	return 0;
+}
+
+static void __init axxia_smp_prepare_cpus(unsigned int max_cpus)
+{
+	int cpu_count = 0;
+	int cpu;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs actually
+	 * populated at the present time.
+	 */
+	for_each_possible_cpu(cpu) {
+		struct device_node *np;
+		u32 release_phys;
+
+		np = of_get_cpu_node(cpu, NULL);
+		if (!np)
+			continue;
+		if (of_property_read_u32(np, "cpu-release-addr", &release_phys))
+			continue;
+
+		if (cpu_count < max_cpus) {
+			set_cpu_present(cpu, true);
+			cpu_count++;
+		}
+
+		if (release_phys != 0)
+			write_release_addr(release_phys);
+	}
+}
+
+static struct smp_operations axxia_smp_ops __initdata = {
+	.smp_prepare_cpus	= axxia_smp_prepare_cpus,
+	.smp_boot_secondary	= axxia_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(axxia_smp, "lsi,syscon-release", &axxia_smp_ops);