Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc driver specific updates from Olof Johansson:
 "These changes are specific to some driver that may be used by multiple
  boards or socs.  The most significant change in here is the move of
  the samsung iommu code from a platform specific in-kernel interface to
  the generic iommu subsystem."

Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  mmc: dt: Consolidate DT bindings
  iommu/exynos: Add iommu driver for EXYNOS Platforms
  ARM: davinci: optimize the DMA ISR
  ARM: davinci: implement DEBUG_LL port choice
  ARM: tegra: Add SMMU enabler in AHB
  ARM: tegra: Add Tegra AHB driver
  Input: pxa27x_keypad add choice to set direct_key_mask
  Input: pxa27x_keypad direct key may be low active
  Input: pxa27x_keypad bug fix for direct_key_mask
  Input: pxa27x_keypad keep clock on as wakeup source
  ARM: dt: tegra: pinmux changes for USB ULPI
  ARM: tegra: add USB ULPI PHY reset GPIO to device tree
  ARM: tegra: don't hard-code USB ULPI PHY reset_gpio
  ARM: tegra: change pll_p_out4's rate to 24MHz
  ARM: tegra: fix pclk rate
  ARM: tegra: reparent sclk to pll_c_out1
  ARM: tegra: Add pllc clock init table
  ARM: dt: tegra cardhu: basic audio support
  ARM: dt: tegra30.dtsi: Add audio-related nodes
  ARM: tegra: add AUXDATA required for audio
  ...

1 files changed, 20 insertions, 38 deletions

diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index cf94552d5274..34290d14754b 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -22,46 +22,28 @@
 
 #define UART_SHIFT	2
 
-		.pushsection .data
-davinci_uart_phys:	.word	0
-davinci_uart_virt:	.word	0
-		.popsection
-
-		.macro addruart, rp, rv, tmp
-
-		/* Use davinci_uart_phys/virt if already configured */
-10:		adr	\rp, 99f		@ get effective addr of 99f
-		ldr	\rv, [\rp]		@ get absolute addr of 99f
-		sub	\rv, \rv, \rp		@ offset between the two
-		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
-		sub	\tmp, \rp, \rv		@ make it effective
-		ldr	\rp, [\tmp, #0]		@ davinci_uart_phys
-		ldr	\rv, [\tmp, #4]		@ davinci_uart_virt
-		cmp	\rp, #0			@ is port configured?
-		cmpne	\rv, #0
-		bne	100f			@ already configured
-
-		/* Check the debug UART address set in uncompress.h */
-		and	\rp, pc, #0xff000000
-		ldr	\rv, =DAVINCI_UART_INFO_OFS
-		add	\rp, \rp, \rv
-
-		/* Copy uart phys address from decompressor uart info */
-		ldr	\rv, [\rp, #0]
-		str	\rv, [\tmp, #0]
-
-		/* Copy uart virt address from decompressor uart info */
-		ldr	\rv, [\rp, #4]
-		str	\rv, [\tmp, #4]
-
-		b	10b
+#if defined(CONFIG_DEBUG_DAVINCI_DMx_UART0)
+#define UART_BASE	DAVINCI_UART0_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART0)
+#define UART_BASE	DA8XX_UART0_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART1)
+#define UART_BASE	DA8XX_UART1_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART2)
+#define UART_BASE	DA8XX_UART2_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_TNETV107X_UART1)
+#define UART_BASE	TNETV107X_UART2_BASE
+#define UART_VIRTBASE	TNETV107X_UART2_VIRT
+#else
+#error "Select a specifc port for DEBUG_LL"
+#endif
 
-		.align
-99:		.word	.
-		.word	davinci_uart_phys
-		.ltorg
+#ifndef UART_VIRTBASE
+#define UART_VIRTBASE	IO_ADDRESS(UART_BASE)
+#endif
 
-100:
+		.macro addruart, rp, rv, tmp
+		ldr	\rp, =UART_BASE
+		ldr	\rv, =UART_VIRTBASE
 		.endm
 
 		.macro	senduart,rd,rx