ARM: add base support for Marvell Dove SoC

The Marvell Dove (88AP510) is a high-performance, highly integrated,
low power SoC with high-end ARM-compatible processor (known as PJ4),
graphics processing unit, high-definition video decoding acceleration
hardware, and a broad range of peripherals.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

1 files changed, 102 insertions, 0 deletions

diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
new file mode 100644
index 000000000000..f2971b745224
--- /dev/null
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -0,0 +1,102 @@
+/*
+ * arch/arm/mach-dove/dove-db-setup.c
+ *
+ * Marvell DB-MV88AP510-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/spi/flash.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/dove.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data dove_db_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static struct mv_sata_platform_data dove_db_sata_data = {
+	.n_ports        = 1,
+};
+
+/*****************************************************************************
+ * SPI Devices:
+ * 	SPI0: 4M Flash ST-M25P32-VMF6P
+ ****************************************************************************/
+static const struct flash_platform_data dove_db_spi_flash_data = {
+	.type		= "m25p64",
+};
+
+static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
+	{
+		.modalias       = "m25p80",
+		.platform_data  = &dove_db_spi_flash_data,
+		.irq            = -1,
+		.max_speed_hz   = 20000000,
+		.bus_num        = 0,
+		.chip_select    = 0,
+	},
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+static int __init dove_db_pci_init(void)
+{
+	if (machine_is_dove_db())
+		dove_pcie_init(1, 1);
+
+	return 0;
+}
+
+subsys_initcall(dove_db_pci_init);
+
+/*****************************************************************************
+ * Board Init
+ ****************************************************************************/
+static void __init dove_db_init(void)
+{
+	/*
+	 * Basic Dove setup. Needs to be called early.
+	 */
+	dove_init();
+
+	dove_ge00_init(&dove_db_ge00_data);
+	dove_ehci0_init();
+	dove_ehci1_init();
+	dove_sata_init(&dove_db_sata_data);
+	dove_spi0_init();
+	dove_spi1_init();
+	dove_uart0_init();
+	dove_uart1_init();
+	dove_i2c_init();
+	spi_register_board_info(dove_db_spi_flash_info,
+				ARRAY_SIZE(dove_db_spi_flash_info));
+}
+
+MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
+	.phys_io	= DOVE_SB_REGS_PHYS_BASE,
+	.io_pg_offst	= ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= dove_db_init,
+	.map_io		= dove_map_io,
+	.init_irq	= dove_init_irq,
+	.timer		= &dove_timer,
+MACHINE_END