Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "Newly added support for additional SoCs:
   - Axis Artpec-6 SoC family
   - Allwinner A83T SoC
   - Mediatek MT7623
   - NXP i.MX6QP SoC
   - ST Microelectronics stm32f469 microcontroller

  New features:
   - SMP support for Mediatek mt2701
   - Big-endian support for NXP i.MX
   - DaVinci now uses the new DMA engine dma_slave_map
   - OMAP now uses the new DMA engine dma_slave_map
   - earlyprintk support for palmchip uart on mach-tango
   - delay timer support for orion

  Other:
   - Exynos PMU driver moved out to drivers/soc/
   - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP,
     uniphier"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: uniphier: rework SMP code to support new System Bus binding
  ARM: uniphier: add missing of_node_put()
  ARM: at91: avoid defining CONFIG_* symbols in source code
  ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
  ARM: imx: Make reset_control_ops const
  ARM: imx: Do L2 errata only if the L2 cache isn't enabled
  ARM: imx: select ARM_CPU_SUSPEND only for imx6
  dmaengine: pxa_dma: fix the maximum requestor line
  ARM: alpine: select the Alpine MSI controller driver
  ARM: pxa: add the number of DMA requestor lines
  dmaengine: mmp-pdma: add number of requestors
  dma: mmp_pdma: Add the #dma-requests DT property documentation
  ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
  ARM: s3c24xx: Avoid warning for inb/outb
  ARM: zynq: Move early printk virtual address to vmalloc area
  ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
  ARM: SAMSUNG: Remove unused register offset definition
  ARM: EXYNOS: Cleanup header files inclusion
  drivers: soc: samsung: Enable COMPILE_TEST
  MAINTAINERS: Add maintainers entry for drivers/soc/samsung
  ...

1 files changed, 15 insertions, 15 deletions

diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c
index 16496a071ecb..cda330c93d61 100644
--- a/arch/arm/mach-imx/3ds_debugboard.c
+++ b/arch/arm/mach-imx/3ds_debugboard.c
@@ -94,8 +94,8 @@ static void mxc_expio_irq_handler(struct irq_desc *desc)
 	/* irq = gpio irq number */
 	desc->irq_data.chip->irq_mask(&desc->irq_data);
 
-	imr_val = __raw_readw(brd_io + INTR_MASK_REG);
-	int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
+	imr_val = imx_readw(brd_io + INTR_MASK_REG);
+	int_valid = imx_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
 
 	expio_irq = 0;
 	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
@@ -117,17 +117,17 @@ static void expio_mask_irq(struct irq_data *d)
 	u16 reg;
 	u32 expio = d->hwirq;
 
-	reg = __raw_readw(brd_io + INTR_MASK_REG);
+	reg = imx_readw(brd_io + INTR_MASK_REG);
 	reg |= (1 << expio);
-	__raw_writew(reg, brd_io + INTR_MASK_REG);
+	imx_writew(reg, brd_io + INTR_MASK_REG);
 }
 
 static void expio_ack_irq(struct irq_data *d)
 {
 	u32 expio = d->hwirq;
 
-	__raw_writew(1 << expio, brd_io + INTR_RESET_REG);
-	__raw_writew(0, brd_io + INTR_RESET_REG);
+	imx_writew(1 << expio, brd_io + INTR_RESET_REG);
+	imx_writew(0, brd_io + INTR_RESET_REG);
 	expio_mask_irq(d);
 }
 
@@ -136,9 +136,9 @@ static void expio_unmask_irq(struct irq_data *d)
 	u16 reg;
 	u32 expio = d->hwirq;
 
-	reg = __raw_readw(brd_io + INTR_MASK_REG);
+	reg = imx_readw(brd_io + INTR_MASK_REG);
 	reg &= ~(1 << expio);
-	__raw_writew(reg, brd_io + INTR_MASK_REG);
+	imx_writew(reg, brd_io + INTR_MASK_REG);
 }
 
 static struct irq_chip expio_irq_chip = {
@@ -162,9 +162,9 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio)
 	if (brd_io == NULL)
 		return -ENOMEM;
 
-	if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
-	    (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
-	    (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
+	if ((imx_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
+	    (imx_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
+	    (imx_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
 		pr_info("3-Stack Debug board not detected\n");
 		iounmap(brd_io);
 		brd_io = NULL;
@@ -181,10 +181,10 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio)
 	gpio_direction_input(intr_gpio);
 
 	/* disable the interrupt and clear the status */
-	__raw_writew(0, brd_io + INTR_MASK_REG);
-	__raw_writew(0xFFFF, brd_io + INTR_RESET_REG);
-	__raw_writew(0, brd_io + INTR_RESET_REG);
-	__raw_writew(0x1F, brd_io + INTR_MASK_REG);
+	imx_writew(0, brd_io + INTR_MASK_REG);
+	imx_writew(0xFFFF, brd_io + INTR_RESET_REG);
+	imx_writew(0, brd_io + INTR_RESET_REG);
+	imx_writew(0x1F, brd_io + INTR_MASK_REG);
 
 	irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
 	WARN_ON(irq_base < 0);