Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 into HEAD

There are some more conflicts than detected by git, namely support for
the newly added cpuimx machines needed to be converted to dynamic device
registration.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Conflicts:
	arch/arm/mach-imx/Makefile
	arch/arm/mach-imx/devices.c
	arch/arm/mach-imx/devices.h
	arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
	arch/arm/mach-mx2/Kconfig
	arch/arm/mach-mx25/Makefile
	arch/arm/mach-mx25/devices.c
	arch/arm/plat-mxc/include/mach/mx25.h
	arch/arm/plat-mxc/include/mach/mxc_nand.h

33 files changed, 8195 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
new file mode 100644
index 000000000000..c5c0369bb481
--- /dev/null
+++ b/arch/arm/mach-imx/Kconfig
@@ -0,0 +1,193 @@
+config IMX_HAVE_DMA_V1
+	bool
+
+if ARCH_MX1
+
+config SOC_IMX1
+	select CPU_ARM920T
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+	bool
+
+comment "MX1 platforms:"
+config MACH_MXLADS
+	bool
+
+config ARCH_MX1ADS
+	bool "MX1ADS platform"
+	select MACH_MXLADS
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
+
+config MACH_SCB9328
+	bool "Synertronixx scb9328"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Say Y here if you are using a Synertronixx scb9328 board
+
+endif
+
+if ARCH_MX2
+
+config SOC_IMX21
+	select CPU_ARM926T
+	select ARCH_MXC_AUDMUX_V1
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+	bool
+
+config SOC_IMX27
+	select CPU_ARM926T
+	select ARCH_MXC_AUDMUX_V1
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+	bool
+
+choice
+	prompt "CPUs:"
+	default MACH_MX21
+
+config MACH_MX21
+	bool "i.MX21 support"
+	select SOC_IMX21
+	help
+	  This enables support for Freescale's MX2 based i.MX21 processor.
+
+config MACH_MX27
+	bool "i.MX27 support"
+	select SOC_IMX27
+	help
+	  This enables support for Freescale's MX2 based i.MX27 processor.
+
+endchoice
+
+endif
+
+if MACH_MX21
+
+comment "MX21 platforms:"
+
+config MACH_MX21ADS
+	bool "MX21ADS platform"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	help
+	  Include support for MX21ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+endif
+
+if MACH_MX27
+
+comment "MX27 platforms:"
+
+config MACH_MX27ADS
+	bool "MX27ADS platform"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	help
+	  Include support for MX27ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCM038
+	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
+	  includes specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_PCM038
+	default MACH_PCM970_BASEBOARD
+
+config MACH_PCM970_BASEBOARD
+	prompt "PHYTEC PCM970 development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Phytec's
+	  PCM970 evaluation board.
+
+endchoice
+
+config MACH_CPUIMX27
+	bool "Eukrea CPUIMX27 module"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	help
+	  Include support for Eukrea CPUIMX27 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+config MACH_EUKREA_CPUIMX27_USESDHC2
+	bool "CPUIMX27 integrates SDHC2 module"
+	depends on MACH_CPUIMX27
+	help
+	  This adds support for the internal SDHC2 used on CPUIMX27
+	  for wifi or eMMC.
+
+config MACH_EUKREA_CPUIMX27_USEUART4
+	bool "CPUIMX27 integrates UART4 module"
+	depends on MACH_CPUIMX27
+	help
+	  This adds support for the internal UART4 used on CPUIMX27
+	  for bluetooth.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_CPUIMX27
+	default MACH_EUKREA_MBIMX27_BASEBOARD
+
+config MACH_EUKREA_MBIMX27_BASEBOARD
+	prompt "Eukrea MBIMX27 development board"
+	bool
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX27 evaluation board.
+
+endchoice
+
+config MACH_MX27_3DS
+	bool "MX27PDK platform"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for MX27PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_IMX27LITE
+	bool "LogicPD MX27 LITEKIT platform"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for MX27 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCA100
+	bool "Phytec phyCARD-s (pca100)"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for phyCARD-s (aka pca100) platform. This
+	  includes specific configurations for the module and its peripherals.
+
+config MACH_MXT_TD60
+	bool "Maxtrack i-MXT TD60"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	help
+	  Include support for i-MXT (aka td60) platform. This
+	  includes specific configurations for the module and its peripherals.
+
+endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
new file mode 100644
index 000000000000..46a9fdfbbd15
--- /dev/null
+++ b/arch/arm/mach-imx/Makefile
@@ -0,0 +1,33 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y	:=  devices.o
+
+obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
+
+obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
+obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
+
+obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
+obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o
+
+# Support for CMOS sensor interface
+obj-$(CONFIG_MX1_VIDEO)	+= mx1-camera-fiq.o mx1-camera-fiq-ksym.o
+
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
+
+obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+
+obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
+obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
+obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
+obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
new file mode 100644
index 000000000000..7988a85cf07d
--- /dev/null
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -0,0 +1,11 @@
+zreladdr-$(CONFIG_ARCH_MX1)	:= 0x08008000
+params_phys-$(CONFIG_ARCH_MX1)	:= 0x08000100
+initrd_phys-$(CONFIG_ARCH_MX1)	:= 0x08800000
+
+zreladdr-$(CONFIG_MACH_MX21)	:= 0xC0008000
+params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
+initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
+
+zreladdr-$(CONFIG_MACH_MX27)	:= 0xA0008000
+params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
+initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c
new file mode 100644
index 000000000000..c05096c38301
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx1.c
@@ -0,0 +1,636 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/math64.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#define IO_ADDR_CCM(off)	(MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
+
+/* CCM register addresses */
+#define CCM_CSCR	IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0	IO_ADDR_CCM(0x4)
+#define CCM_SPCTL0	IO_ADDR_CCM(0xc)
+#define CCM_PCDR	IO_ADDR_CCM(0x20)
+
+#define CCM_CSCR_CLKO_OFFSET	29
+#define CCM_CSCR_CLKO_MASK	(0x7 << 29)
+#define CCM_CSCR_USB_OFFSET	26
+#define CCM_CSCR_USB_MASK	(0x7 << 26)
+#define CCM_CSCR_OSC_EN_SHIFT	17
+#define CCM_CSCR_SYSTEM_SEL	(1 << 16)
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK	(0xf << 10)
+#define CCM_CSCR_PRESC		(1 << 15)
+
+#define CCM_PCDR_PCLK3_OFFSET	16
+#define CCM_PCDR_PCLK3_MASK	(0x7f << 16)
+#define CCM_PCDR_PCLK2_OFFSET	4
+#define CCM_PCDR_PCLK2_MASK	(0xf << 4)
+#define CCM_PCDR_PCLK1_OFFSET	0
+#define CCM_PCDR_PCLK1_MASK	0xf
+
+#define IO_ADDR_SCM(off)	(MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
+
+/* SCM register addresses */
+#define SCM_GCCR	IO_ADDR_SCM(0xc)
+
+#define SCM_GCCR_DMA_CLK_EN_OFFSET	3
+#define SCM_GCCR_CSI_CLK_EN_OFFSET	2
+#define SCM_GCCR_MMA_CLK_EN_OFFSET	1
+#define SCM_GCCR_USBD_CLK_EN_OFFSET	0
+
+static int _clk_enable(struct clk *clk)
+{
+	unsigned int reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+	unsigned int reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_can_use_parent(const struct clk *clk_arr[], unsigned int size,
+			       struct clk *parent)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		if (parent == clk_arr[i])
+			return i;
+
+	return -EINVAL;
+}
+
+static unsigned long
+_clk_simple_round_rate(struct clk *clk, unsigned long rate, unsigned int limit)
+{
+	int div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > limit)
+		div = limit;
+
+	return parent_rate / div;
+}
+
+static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->round_rate(clk->parent, rate);
+}
+
+static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->set_rate(clk->parent, rate);
+}
+
+static unsigned long clk16m_get_rate(struct clk *clk)
+{
+	return 16000000;
+}
+
+static struct clk clk16m = {
+	.get_rate = clk16m_get_rate,
+	.enable = _clk_enable,
+	.enable_reg = CCM_CSCR,
+	.enable_shift = CCM_CSCR_OSC_EN_SHIFT,
+	.disable = _clk_disable,
+};
+
+/* in Hz */
+static unsigned long clk32_rate;
+
+static unsigned long clk32_get_rate(struct clk *clk)
+{
+	return clk32_rate;
+}
+
+static struct clk clk32 = {
+	.get_rate = clk32_get_rate,
+};
+
+static unsigned long clk32_premult_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) * 512;
+}
+
+static struct clk clk32_premult = {
+	.parent = &clk32,
+	.get_rate = clk32_premult_get_rate,
+};
+
+static const struct clk *prem_clk_clocks[] = {
+	&clk32_premult,
+	&clk16m,
+};
+
+static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int i;
+	unsigned int reg = __raw_readl(CCM_CSCR);
+
+	i = _clk_can_use_parent(prem_clk_clocks, ARRAY_SIZE(prem_clk_clocks),
+				parent);
+
+	switch (i) {
+	case 0:
+		reg &= ~CCM_CSCR_SYSTEM_SEL;
+		break;
+	case 1:
+		reg |= CCM_CSCR_SYSTEM_SEL;
+		break;
+	default:
+		return i;
+	}
+
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
+static struct clk prem_clk = {
+	.set_parent = prem_clk_set_parent,
+};
+
+static unsigned long system_clk_get_rate(struct clk *clk)
+{
+	return mxc_decode_pll(__raw_readl(CCM_SPCTL0),
+			      clk_get_rate(clk->parent));
+}
+
+static struct clk system_clk = {
+	.parent = &prem_clk,
+	.get_rate = system_clk_get_rate,
+};
+
+static unsigned long mcu_clk_get_rate(struct clk *clk)
+{
+	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
+			      clk_get_rate(clk->parent));
+}
+
+static struct clk mcu_clk = {
+	.parent = &clk32_premult,
+	.get_rate = mcu_clk_get_rate,
+};
+
+static unsigned long fclk_get_rate(struct clk *clk)
+{
+	unsigned long fclk = clk_get_rate(clk->parent);
+
+	if (__raw_readl(CCM_CSCR) & CCM_CSCR_PRESC)
+		fclk /= 2;
+
+	return fclk;
+}
+
+static struct clk fclk = {
+	.parent = &mcu_clk,
+	.get_rate = fclk_get_rate,
+};
+
+/*
+ *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
+ */
+static unsigned long hclk_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
+			CCM_CSCR_BCLK_MASK) >> CCM_CSCR_BCLK_OFFSET) + 1);
+}
+
+static unsigned long hclk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 16);
+}
+
+static int hclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg &= ~CCM_CSCR_BCLK_MASK;
+	reg |= div << CCM_CSCR_BCLK_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
+static struct clk hclk = {
+	.parent = &system_clk,
+	.get_rate = hclk_get_rate,
+	.round_rate = hclk_round_rate,
+	.set_rate = hclk_set_rate,
+};
+
+static unsigned long clk48m_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
+			CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET) + 1);
+}
+
+static unsigned long clk48m_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 8);
+}
+
+static int clk48m_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg &= ~CCM_CSCR_USB_MASK;
+	reg |= div << CCM_CSCR_USB_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
+static struct clk clk48m = {
+	.parent = &system_clk,
+	.get_rate = clk48m_get_rate,
+	.round_rate = clk48m_round_rate,
+	.set_rate = clk48m_set_rate,
+};
+
+/*
+ *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
+ */
+static unsigned long perclk1_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
+			CCM_PCDR_PCLK1_MASK) >> CCM_PCDR_PCLK1_OFFSET) + 1);
+}
+
+static unsigned long perclk1_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 16);
+}
+
+static int perclk1_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_PCDR);
+	reg &= ~CCM_PCDR_PCLK1_MASK;
+	reg |= div << CCM_PCDR_PCLK1_OFFSET;
+	__raw_writel(reg, CCM_PCDR);
+
+	return 0;
+}
+
+/*
+ *  get peripheral clock 2 ( LCD, SD, SPI[12] )
+ */
+static unsigned long perclk2_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
+			CCM_PCDR_PCLK2_MASK) >> CCM_PCDR_PCLK2_OFFSET) + 1);
+}
+
+static unsigned long perclk2_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 16);
+}
+
+static int perclk2_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_PCDR);
+	reg &= ~CCM_PCDR_PCLK2_MASK;
+	reg |= div << CCM_PCDR_PCLK2_OFFSET;
+	__raw_writel(reg, CCM_PCDR);
+
+	return 0;
+}
+
+/*
+ *  get peripheral clock 3 ( SSI )
+ */
+static unsigned long perclk3_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
+			CCM_PCDR_PCLK3_MASK) >> CCM_PCDR_PCLK3_OFFSET) + 1);
+}
+
+static unsigned long perclk3_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 128);
+}
+
+static int perclk3_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 128 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_PCDR);
+	reg &= ~CCM_PCDR_PCLK3_MASK;
+	reg |= div << CCM_PCDR_PCLK3_OFFSET;
+	__raw_writel(reg, CCM_PCDR);
+
+	return 0;
+}
+
+static struct clk perclk[] = {
+	{
+		.id = 0,
+		.parent = &system_clk,
+		.get_rate = perclk1_get_rate,
+		.round_rate = perclk1_round_rate,
+		.set_rate = perclk1_set_rate,
+	}, {
+		.id = 1,
+		.parent = &system_clk,
+		.get_rate = perclk2_get_rate,
+		.round_rate = perclk2_round_rate,
+		.set_rate = perclk2_set_rate,
+	}, {
+		.id = 2,
+		.parent = &system_clk,
+		.get_rate = perclk3_get_rate,
+		.round_rate = perclk3_round_rate,
+		.set_rate = perclk3_set_rate,
+	}
+};
+
+static const struct clk *clko_clocks[] = {
+	&perclk[0],
+	&hclk,
+	&clk48m,
+	&clk16m,
+	&prem_clk,
+	&fclk,
+};
+
+static int clko_set_parent(struct clk *clk, struct clk *parent)
+{
+	int i;
+	unsigned int reg;
+
+	i = _clk_can_use_parent(clko_clocks, ARRAY_SIZE(clko_clocks), parent);
+	if (i < 0)
+		return i;
+
+	reg = __raw_readl(CCM_CSCR) & ~CCM_CSCR_CLKO_MASK;
+	reg |= i << CCM_CSCR_CLKO_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	if (clko_clocks[i]->set_rate && clko_clocks[i]->round_rate) {
+		clk->set_rate = _clk_parent_set_rate;
+		clk->round_rate = _clk_parent_round_rate;
+	} else {
+		clk->set_rate = NULL;
+		clk->round_rate = NULL;
+	}
+
+	return 0;
+}
+
+static struct clk clko_clk = {
+	.set_parent = clko_set_parent,
+};
+
+static struct clk dma_clk = {
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+	.enable = _clk_enable,
+	.enable_reg = SCM_GCCR,
+	.enable_shift = SCM_GCCR_DMA_CLK_EN_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk csi_clk = {
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+	.enable = _clk_enable,
+	.enable_reg = SCM_GCCR,
+	.enable_shift = SCM_GCCR_CSI_CLK_EN_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk mma_clk = {
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+	.enable = _clk_enable,
+	.enable_reg = SCM_GCCR,
+	.enable_shift = SCM_GCCR_MMA_CLK_EN_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk usbd_clk = {
+	.parent = &clk48m,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+	.enable = _clk_enable,
+	.enable_reg = SCM_GCCR,
+	.enable_shift = SCM_GCCR_USBD_CLK_EN_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk gpt_clk = {
+	.parent = &perclk[0],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk uart_clk = {
+	.parent = &perclk[0],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk i2c_clk = {
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk spi_clk = {
+	.parent = &perclk[1],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk sdhc_clk = {
+	.parent = &perclk[1],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk lcdc_clk = {
+	.parent = &perclk[1],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk mshc_clk = {
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk ssi_clk = {
+	.parent = &perclk[2],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk rtc_clk = {
+	.parent = &clk32,
+};
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+static struct clk_lookup lookups[] __initdata = {
+	_REGISTER_CLOCK(NULL, "dma", dma_clk)
+	_REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK(NULL, "mma", mma_clk)
+	_REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, spi_clk)
+	_REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi_clk)
+	_REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
+};
+
+int __init mx1_clocks_init(unsigned long fref)
+{
+	unsigned int reg;
+
+	/* disable clocks we are able to */
+	__raw_writel(0, SCM_GCCR);
+
+	clk32_rate = fref;
+	reg = __raw_readl(CCM_CSCR);
+
+	/* detect clock reference for system PLL */
+	if (reg & CCM_CSCR_SYSTEM_SEL) {
+		prem_clk.parent = &clk16m;
+	} else {
+		/* ensure that oscillator is disabled */
+		reg &= ~(1 << CCM_CSCR_OSC_EN_SHIFT);
+		__raw_writel(reg, CCM_CSCR);
+		prem_clk.parent = &clk32_premult;
+	}
+
+	/* detect reference for CLKO */
+	reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
+	clko_clk.parent = (struct clk *)clko_clocks[reg];
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	clk_enable(&hclk);
+	clk_enable(&fclk);
+
+	mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
+			MX1_TIM1_INT);
+
+	return 0;
+}
diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c
new file mode 100644
index 000000000000..bb419ef4d133
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx21.c
@@ -0,0 +1,1239 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_PRESC_OFFSET	29
+#define CCM_CSCR_PRESC_MASK	(0x7 << CCM_CSCR_PRESC_OFFSET)
+
+#define CCM_CSCR_USB_OFFSET	26
+#define CCM_CSCR_USB_MASK	(0x7 << CCM_CSCR_USB_OFFSET)
+#define CCM_CSCR_SD_OFFSET	24
+#define CCM_CSCR_SD_MASK	(0x3 << CCM_CSCR_SD_OFFSET)
+#define CCM_CSCR_SPLLRES	(1 << 22)
+#define CCM_CSCR_MPLLRES	(1 << 21)
+#define CCM_CSCR_SSI2_OFFSET	20
+#define CCM_CSCR_SSI2		(1 << CCM_CSCR_SSI2_OFFSET)
+#define CCM_CSCR_SSI1_OFFSET	19
+#define CCM_CSCR_SSI1		(1 << CCM_CSCR_SSI1_OFFSET)
+#define CCM_CSCR_FIR_OFFSET	18
+#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
+#define CCM_CSCR_SP		(1 << 17)
+#define CCM_CSCR_MCU		(1 << 16)
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK	(0xf << CCM_CSCR_BCLK_OFFSET)
+#define CCM_CSCR_IPDIV_OFFSET	9
+#define CCM_CSCR_IPDIV		(1 << CCM_CSCR_IPDIV_OFFSET)
+
+#define CCM_CSCR_OSC26MDIV	(1 << 4)
+#define CCM_CSCR_OSC26M		(1 << 3)
+#define CCM_CSCR_FPM		(1 << 2)
+#define CCM_CSCR_SPEN		(1 << 1)
+#define CCM_CSCR_MPEN		1
+
+#define CCM_MPCTL0_CPLM		(1 << 31)
+#define CCM_MPCTL0_PD_OFFSET	26
+#define CCM_MPCTL0_PD_MASK	(0xf << 26)
+#define CCM_MPCTL0_MFD_OFFSET	16
+#define CCM_MPCTL0_MFD_MASK	(0x3ff << 16)
+#define CCM_MPCTL0_MFI_OFFSET	10
+#define CCM_MPCTL0_MFI_MASK	(0xf << 10)
+#define CCM_MPCTL0_MFN_OFFSET	0
+#define CCM_MPCTL0_MFN_MASK	0x3ff
+
+#define CCM_MPCTL1_LF		(1 << 15)
+#define CCM_MPCTL1_BRMO		(1 << 6)
+
+#define CCM_SPCTL0_CPLM		(1 << 31)
+#define CCM_SPCTL0_PD_OFFSET	26
+#define CCM_SPCTL0_PD_MASK	(0xf << 26)
+#define CCM_SPCTL0_MFD_OFFSET	16
+#define CCM_SPCTL0_MFD_MASK	(0x3ff << 16)
+#define CCM_SPCTL0_MFI_OFFSET	10
+#define CCM_SPCTL0_MFI_MASK	(0xf << 10)
+#define CCM_SPCTL0_MFN_OFFSET	0
+#define CCM_SPCTL0_MFN_MASK	0x3ff
+
+#define CCM_SPCTL1_LF		(1 << 15)
+#define CCM_SPCTL1_BRMO		(1 << 6)
+
+#define CCM_OSC26MCTL_PEAK_OFFSET	16
+#define CCM_OSC26MCTL_PEAK_MASK		(0x3 << 16)
+#define CCM_OSC26MCTL_AGC_OFFSET	8
+#define CCM_OSC26MCTL_AGC_MASK		(0x3f << 8)
+#define CCM_OSC26MCTL_ANATEST_OFFSET	0
+#define CCM_OSC26MCTL_ANATEST_MASK	0x3f
+
+#define CCM_PCDR0_SSI2BAUDDIV_OFFSET	26
+#define CCM_PCDR0_SSI2BAUDDIV_MASK	(0x3f << 26)
+#define CCM_PCDR0_SSI1BAUDDIV_OFFSET	16
+#define CCM_PCDR0_SSI1BAUDDIV_MASK	(0x3f << 16)
+#define CCM_PCDR0_NFCDIV_OFFSET		12
+#define CCM_PCDR0_NFCDIV_MASK		(0xf << 12)
+#define CCM_PCDR0_48MDIV_OFFSET		5
+#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
+#define CCM_PCDR0_FIRIDIV_OFFSET	0
+#define CCM_PCDR0_FIRIDIV_MASK		0x1f
+#define CCM_PCDR1_PERDIV4_OFFSET	24
+#define CCM_PCDR1_PERDIV4_MASK		(0x3f << 24)
+#define CCM_PCDR1_PERDIV3_OFFSET	16
+#define CCM_PCDR1_PERDIV3_MASK		(0x3f << 16)
+#define CCM_PCDR1_PERDIV2_OFFSET	8
+#define CCM_PCDR1_PERDIV2_MASK		(0x3f << 8)
+#define CCM_PCDR1_PERDIV1_OFFSET	0
+#define CCM_PCDR1_PERDIV1_MASK		0x3f
+
+#define CCM_PCCR_HCLK_CSI_OFFSET	31
+#define CCM_PCCR_HCLK_CSI_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_DMA_OFFSET	30
+#define CCM_PCCR_HCLK_DMA_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_BROM_OFFSET	28
+#define CCM_PCCR_HCLK_BROM_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_EMMA_OFFSET	27
+#define CCM_PCCR_HCLK_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_LCDC_OFFSET	26
+#define CCM_PCCR_HCLK_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_SLCDC_OFFSET	25
+#define CCM_PCCR_HCLK_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_USBOTG_OFFSET	24
+#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
+#define CCM_PCCR_HCLK_BMI_OFFSET	23
+#define CCM_PCCR_BMI_MASK		(1 << CCM_PCCR_BMI_MASK)
+#define CCM_PCCR_HCLK_BMI_REG		CCM_PCCR0
+#define CCM_PCCR_PERCLK4_OFFSET		22
+#define CCM_PCCR_PERCLK4_REG		CCM_PCCR0
+#define CCM_PCCR_SLCDC_OFFSET		21
+#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_BAUD_OFFSET	20
+#define CCM_PCCR_FIRI_BAUD_MASK		(1 << CCM_PCCR_FIRI_BAUD_MASK)
+#define CCM_PCCR_FIRI_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_NFC_OFFSET		19
+#define CCM_PCCR_NFC_REG		CCM_PCCR0
+#define CCM_PCCR_LCDC_OFFSET		18
+#define CCM_PCCR_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_BAUD_OFFSET	17
+#define CCM_PCCR_SSI1_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_BAUD_OFFSET	16
+#define CCM_PCCR_SSI2_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_EMMA_OFFSET		15
+#define CCM_PCCR_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_USBOTG_OFFSET		14
+#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
+#define CCM_PCCR_DMA_OFFSET		13
+#define CCM_PCCR_DMA_REG		CCM_PCCR0
+#define CCM_PCCR_I2C1_OFFSET		12
+#define CCM_PCCR_I2C1_REG		CCM_PCCR0
+#define CCM_PCCR_GPIO_OFFSET		11
+#define CCM_PCCR_GPIO_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC2_OFFSET		10
+#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC1_OFFSET		9
+#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_OFFSET		8
+#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
+#define CCM_PCCR_FIRI_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_IPG_OFFSET	7
+#define CCM_PCCR_SSI2_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_IPG_OFFSET	6
+#define CCM_PCCR_SSI1_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI2_OFFSET		5
+#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI1_OFFSET		4
+#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
+#define CCM_PCCR_UART4_OFFSET		3
+#define CCM_PCCR_UART4_REG		CCM_PCCR0
+#define CCM_PCCR_UART3_OFFSET		2
+#define CCM_PCCR_UART3_REG		CCM_PCCR0
+#define CCM_PCCR_UART2_OFFSET		1
+#define CCM_PCCR_UART2_REG		CCM_PCCR0
+#define CCM_PCCR_UART1_OFFSET		0
+#define CCM_PCCR_UART1_REG		CCM_PCCR0
+
+#define CCM_PCCR_OWIRE_OFFSET		31
+#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
+#define CCM_PCCR_KPP_OFFSET		30
+#define CCM_PCCR_KPP_REG		CCM_PCCR1
+#define CCM_PCCR_RTC_OFFSET		29
+#define CCM_PCCR_RTC_REG		CCM_PCCR1
+#define CCM_PCCR_PWM_OFFSET		28
+#define CCM_PCCR_PWM_REG		CCM_PCCR1
+#define CCM_PCCR_GPT3_OFFSET		27
+#define CCM_PCCR_GPT3_REG		CCM_PCCR1
+#define CCM_PCCR_GPT2_OFFSET		26
+#define CCM_PCCR_GPT2_REG		CCM_PCCR1
+#define CCM_PCCR_GPT1_OFFSET		25
+#define CCM_PCCR_GPT1_REG		CCM_PCCR1
+#define CCM_PCCR_WDT_OFFSET		24
+#define CCM_PCCR_WDT_REG		CCM_PCCR1
+#define CCM_PCCR_CSPI3_OFFSET		23
+#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
+
+#define CCM_PCCR_CSPI1_MASK		(1 << CCM_PCCR_CSPI1_OFFSET)
+#define CCM_PCCR_CSPI2_MASK		(1 << CCM_PCCR_CSPI2_OFFSET)
+#define CCM_PCCR_CSPI3_MASK		(1 << CCM_PCCR_CSPI3_OFFSET)
+#define CCM_PCCR_DMA_MASK		(1 << CCM_PCCR_DMA_OFFSET)
+#define CCM_PCCR_EMMA_MASK		(1 << CCM_PCCR_EMMA_OFFSET)
+#define CCM_PCCR_GPIO_MASK		(1 << CCM_PCCR_GPIO_OFFSET)
+#define CCM_PCCR_GPT1_MASK		(1 << CCM_PCCR_GPT1_OFFSET)
+#define CCM_PCCR_GPT2_MASK		(1 << CCM_PCCR_GPT2_OFFSET)
+#define CCM_PCCR_GPT3_MASK		(1 << CCM_PCCR_GPT3_OFFSET)
+#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
+#define CCM_PCCR_HCLK_CSI_MASK		(1 << CCM_PCCR_HCLK_CSI_OFFSET)
+#define CCM_PCCR_HCLK_DMA_MASK		(1 << CCM_PCCR_HCLK_DMA_OFFSET)
+#define CCM_PCCR_HCLK_EMMA_MASK		(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
+#define CCM_PCCR_HCLK_LCDC_MASK		(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
+#define CCM_PCCR_HCLK_SLCDC_MASK	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
+#define CCM_PCCR_HCLK_USBOTG_MASK	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
+#define CCM_PCCR_I2C1_MASK		(1 << CCM_PCCR_I2C1_OFFSET)
+#define CCM_PCCR_KPP_MASK		(1 << CCM_PCCR_KPP_OFFSET)
+#define CCM_PCCR_LCDC_MASK		(1 << CCM_PCCR_LCDC_OFFSET)
+#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
+#define CCM_PCCR_OWIRE_MASK		(1 << CCM_PCCR_OWIRE_OFFSET)
+#define CCM_PCCR_PERCLK4_MASK		(1 << CCM_PCCR_PERCLK4_OFFSET)
+#define CCM_PCCR_PWM_MASK		(1 << CCM_PCCR_PWM_OFFSET)
+#define CCM_PCCR_RTC_MASK		(1 << CCM_PCCR_RTC_OFFSET)
+#define CCM_PCCR_SDHC1_MASK		(1 << CCM_PCCR_SDHC1_OFFSET)
+#define CCM_PCCR_SDHC2_MASK		(1 << CCM_PCCR_SDHC2_OFFSET)
+#define CCM_PCCR_SLCDC_MASK		(1 << CCM_PCCR_SLCDC_OFFSET)
+#define CCM_PCCR_SSI1_BAUD_MASK		(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
+#define CCM_PCCR_SSI1_IPG_MASK		(1 << CCM_PCCR_SSI1_IPG_OFFSET)
+#define CCM_PCCR_SSI2_BAUD_MASK		(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
+#define CCM_PCCR_SSI2_IPG_MASK		(1 << CCM_PCCR_SSI2_IPG_OFFSET)
+#define CCM_PCCR_UART1_MASK		(1 << CCM_PCCR_UART1_OFFSET)
+#define CCM_PCCR_UART2_MASK		(1 << CCM_PCCR_UART2_OFFSET)
+#define CCM_PCCR_UART3_MASK		(1 << CCM_PCCR_UART3_OFFSET)
+#define CCM_PCCR_UART4_MASK		(1 << CCM_PCCR_UART4_OFFSET)
+#define CCM_PCCR_USBOTG_MASK		(1 << CCM_PCCR_USBOTG_OFFSET)
+#define CCM_PCCR_WDT_MASK		(1 << CCM_PCCR_WDT_OFFSET)
+
+#define CCM_CCSR_32KSR		(1 << 15)
+
+#define CCM_CCSR_CLKMODE1	(1 << 9)
+#define CCM_CCSR_CLKMODE0	(1 << 8)
+
+#define CCM_CCSR_CLKOSEL_OFFSET 0
+#define CCM_CCSR_CLKOSEL_MASK	0x1f
+
+#define SYS_FMCR		0x14	/* Functional Muxing Control Reg */
+#define SYS_CHIP_ID		0x00	/* The offset of CHIP ID register */
+
+static int _clk_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+	return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static unsigned long _clk_generic_round_rate(struct clk *clk,
+			unsigned long rate,
+			u32 max_divisor)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > max_divisor)
+		div = max_divisor;
+
+	return parent_rate / div;
+}
+
+static int _clk_spll_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg |= CCM_CSCR_SPEN;
+	__raw_writel(reg, CCM_CSCR);
+
+	while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
+		;
+	return 0;
+}
+
+static void _clk_spll_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg &= ~CCM_CSCR_SPEN;
+	__raw_writel(reg, CCM_CSCR);
+}
+
+
+#define CSCR() (__raw_readl(CCM_CSCR))
+#define PCDR0() (__raw_readl(CCM_PCDR0))
+#define PCDR1() (__raw_readl(CCM_PCDR1))
+
+static unsigned long _clk_perclkx_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	return _clk_generic_round_rate(clk, rate, 64);
+}
+
+static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->id < 0 || clk->id > 3)
+		return -EINVAL;
+
+	div = parent_rate / rate;
+	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg =
+	    __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
+				       (clk->id << 3));
+	reg |= div << (clk->id << 3);
+	__raw_writel(reg, CCM_PCDR1);
+
+	return 0;
+}
+
+static unsigned long _clk_usb_recalc(struct clk *clk)
+{
+	unsigned long usb_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
+
+	return parent_rate / (usb_pdf + 1U);
+}
+
+static unsigned long _clk_usb_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	return _clk_generic_round_rate(clk, rate, 8);
+}
+
+static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg = CSCR() & ~CCM_CSCR_USB_MASK;
+	reg |= div << CCM_CSCR_USB_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
+static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
+{
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
+
+	return 2UL * parent_rate / pdf;
+}
+
+static unsigned long _clk_ssi1_recalc(struct clk *clk)
+{
+	return _clk_ssix_recalc(clk,
+		(PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK)
+		>> CCM_PCDR0_SSI1BAUDDIV_OFFSET);
+}
+
+static unsigned long _clk_ssi2_recalc(struct clk *clk)
+{
+	return _clk_ssix_recalc(clk,
+		(PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
+		CCM_PCDR0_SSI2BAUDDIV_OFFSET);
+}
+
+static unsigned long _clk_nfc_recalc(struct clk *clk)
+{
+	unsigned long nfc_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	nfc_pdf = (PCDR0() & CCM_PCDR0_NFCDIV_MASK)
+		>> CCM_PCDR0_NFCDIV_OFFSET;
+
+	return parent_rate / (nfc_pdf + 1);
+}
+
+static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->round_rate(clk->parent, rate);
+}
+
+static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->set_rate(clk->parent, rate);
+}
+
+static unsigned long external_high_reference; /* in Hz */
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+	return external_high_reference;
+}
+
+/*
+ * the high frequency external clock reference
+ * Default case is 26MHz.
+ */
+static struct clk ckih_clk = {
+	.get_rate = get_high_reference_clock_rate,
+};
+
+static unsigned long external_low_reference; /* in Hz */
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+	return external_low_reference;
+}
+
+/*
+ * the low frequency external clock reference
+ * Default case is 32.768kHz.
+ */
+static struct clk ckil_clk = {
+	.get_rate = get_low_reference_clock_rate,
+};
+
+
+static unsigned long _clk_fpm_recalc(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) * 512;
+}
+
+/* Output of frequency pre multiplier */
+static struct clk fpm_clk = {
+	.parent = &ckil_clk,
+	.get_rate = _clk_fpm_recalc,
+};
+
+static unsigned long get_mpll_clk(struct clk *clk)
+{
+	uint32_t reg;
+	unsigned long ref_clk;
+	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+	unsigned long long temp;
+
+	ref_clk = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(CCM_MPCTL0);
+	pdf = (reg & CCM_MPCTL0_PD_MASK)  >> CCM_MPCTL0_PD_OFFSET;
+	mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
+	mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
+	mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
+
+	mfi = (mfi <= 5) ? 5 : mfi;
+	temp = 2LL * ref_clk * mfn;
+	do_div(temp, mfd + 1);
+	temp = 2LL * ref_clk * mfi + temp;
+	do_div(temp, pdf + 1);
+
+	return (unsigned long)temp;
+}
+
+static struct clk mpll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = get_mpll_clk,
+};
+
+static unsigned long _clk_fclk_get_rate(struct clk *clk)
+{
+	unsigned long parent_rate;
+	u32 div;
+
+	div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
+	parent_rate = clk_get_rate(clk->parent);
+
+	return parent_rate / (div+1);
+}
+
+static struct clk fclk_clk = {
+	.parent = &mpll_clk,
+	.get_rate = _clk_fclk_get_rate
+};
+
+static unsigned long get_spll_clk(struct clk *clk)
+{
+	uint32_t reg;
+	unsigned long ref_clk;
+	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+	unsigned long long temp;
+
+	ref_clk = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(CCM_SPCTL0);
+	pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
+	mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
+	mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
+	mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
+
+	mfi = (mfi <= 5) ? 5 : mfi;
+	temp = 2LL * ref_clk * mfn;
+	do_div(temp, mfd + 1);
+	temp = 2LL * ref_clk * mfi + temp;
+	do_div(temp, pdf + 1);
+
+	return (unsigned long)temp;
+}
+
+static struct clk spll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = get_spll_clk,
+	.enable = _clk_spll_enable,
+	.disable = _clk_spll_disable,
+};
+
+static unsigned long get_hclk_clk(struct clk *clk)
+{
+	unsigned long rate;
+	unsigned long bclk_pdf;
+
+	bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
+		>> CCM_CSCR_BCLK_OFFSET;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (bclk_pdf + 1);
+}
+
+static struct clk hclk_clk = {
+	.parent = &fclk_clk,
+	.get_rate = get_hclk_clk,
+};
+
+static unsigned long get_ipg_clk(struct clk *clk)
+{
+	unsigned long rate;
+	unsigned long ipg_pdf;
+
+	ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (ipg_pdf + 1);
+}
+
+static struct clk ipg_clk = {
+	.parent = &hclk_clk,
+	.get_rate = get_ipg_clk,
+};
+
+static unsigned long _clk_perclkx_recalc(struct clk *clk)
+{
+	unsigned long perclk_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->id < 0 || clk->id > 3)
+		return 0;
+
+	perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
+
+	return parent_rate / (perclk_pdf + 1);
+}
+
+static struct clk per_clk[] = {
+	{
+		.id = 0,
+		.parent = &mpll_clk,
+		.get_rate = _clk_perclkx_recalc,
+	}, {
+		.id = 1,
+		.parent = &mpll_clk,
+		.get_rate = _clk_perclkx_recalc,
+	}, {
+		.id = 2,
+		.parent = &mpll_clk,
+		.round_rate = _clk_perclkx_round_rate,
+		.set_rate = _clk_perclkx_set_rate,
+		.get_rate = _clk_perclkx_recalc,
+		/* Enable/Disable done via lcd_clkc[1] */
+	}, {
+		.id = 3,
+		.parent = &mpll_clk,
+		.round_rate = _clk_perclkx_round_rate,
+		.set_rate = _clk_perclkx_set_rate,
+		.get_rate = _clk_perclkx_recalc,
+		/* Enable/Disable done via csi_clk[1] */
+	},
+};
+
+static struct clk uart_ipg_clk[];
+
+static struct clk uart_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[1],
+	}, {
+		.id = 2,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[2],
+	}, {
+		.id = 3,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[3],
+	},
+};
+
+static struct clk uart_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART1_REG,
+		.enable_shift = CCM_PCCR_UART1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART2_REG,
+		.enable_shift = CCM_PCCR_UART2_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 2,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART3_REG,
+		.enable_shift = CCM_PCCR_UART3_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 3,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART4_REG,
+		.enable_shift = CCM_PCCR_UART4_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk gpt_ipg_clk[];
+
+static struct clk gpt_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[0],
+		.secondary = &gpt_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[0],
+		.secondary = &gpt_ipg_clk[1],
+	}, {
+		.id = 2,
+		.parent = &per_clk[0],
+		.secondary = &gpt_ipg_clk[2],
+	},
+};
+
+static struct clk gpt_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_GPT1_REG,
+		.enable_shift = CCM_PCCR_GPT1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_GPT2_REG,
+		.enable_shift = CCM_PCCR_GPT2_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 2,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_GPT3_REG,
+		.enable_shift = CCM_PCCR_GPT3_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk pwm_clk[] = {
+	{
+		.parent = &per_clk[0],
+		.secondary = &pwm_clk[1],
+	}, {
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_PWM_REG,
+		.enable_shift = CCM_PCCR_PWM_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk sdhc_ipg_clk[];
+
+static struct clk sdhc_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[1],
+		.secondary = &sdhc_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[1],
+		.secondary = &sdhc_ipg_clk[1],
+	},
+};
+
+static struct clk sdhc_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SDHC1_REG,
+		.enable_shift = CCM_PCCR_SDHC1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SDHC2_REG,
+		.enable_shift = CCM_PCCR_SDHC2_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk cspi_ipg_clk[];
+
+static struct clk cspi_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[1],
+		.secondary = &cspi_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[1],
+		.secondary = &cspi_ipg_clk[1],
+	}, {
+		.id = 2,
+		.parent = &per_clk[1],
+		.secondary = &cspi_ipg_clk[2],
+	},
+};
+
+static struct clk cspi_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_CSPI1_REG,
+		.enable_shift = CCM_PCCR_CSPI1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_CSPI2_REG,
+		.enable_shift = CCM_PCCR_CSPI2_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 3,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_CSPI3_REG,
+		.enable_shift = CCM_PCCR_CSPI3_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk lcdc_clk[] = {
+	{
+		.parent = &per_clk[2],
+		.secondary = &lcdc_clk[1],
+		.round_rate = _clk_parent_round_rate,
+		.set_rate = _clk_parent_set_rate,
+	}, {
+		.parent = &ipg_clk,
+		.secondary = &lcdc_clk[2],
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_LCDC_REG,
+		.enable_shift = CCM_PCCR_LCDC_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_LCDC_REG,
+		.enable_shift = CCM_PCCR_HCLK_LCDC_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk csi_clk[] = {
+	{
+		.parent = &per_clk[3],
+		.secondary = &csi_clk[1],
+		.round_rate = _clk_parent_round_rate,
+		.set_rate = _clk_parent_set_rate,
+	}, {
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_CSI_REG,
+		.enable_shift = CCM_PCCR_HCLK_CSI_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk usb_clk[] = {
+	{
+		.parent = &spll_clk,
+		.secondary = &usb_clk[1],
+		.get_rate = _clk_usb_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_USBOTG_REG,
+		.enable_shift = CCM_PCCR_USBOTG_OFFSET,
+		.disable = _clk_disable,
+		.round_rate = _clk_usb_round_rate,
+		.set_rate = _clk_usb_set_rate,
+	}, {
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_USBOTG_REG,
+		.enable_shift = CCM_PCCR_HCLK_USBOTG_OFFSET,
+		.disable = _clk_disable,
+	}
+};
+
+static struct clk ssi_ipg_clk[];
+
+static struct clk ssi_clk[] = {
+	{
+		.id = 0,
+		.parent = &mpll_clk,
+		.secondary = &ssi_ipg_clk[0],
+		.get_rate = _clk_ssi1_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI1_BAUD_REG,
+		.enable_shift = CCM_PCCR_SSI1_BAUD_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &mpll_clk,
+		.secondary = &ssi_ipg_clk[1],
+		.get_rate = _clk_ssi2_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI2_BAUD_REG,
+		.enable_shift = CCM_PCCR_SSI2_BAUD_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk ssi_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI1_REG,
+		.enable_shift = CCM_PCCR_SSI1_IPG_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI2_REG,
+		.enable_shift = CCM_PCCR_SSI2_IPG_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+
+static struct clk nfc_clk = {
+	.parent = &fclk_clk,
+	.get_rate = _clk_nfc_recalc,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_NFC_REG,
+	.enable_shift = CCM_PCCR_NFC_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk dma_clk[] = {
+	{
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_DMA_REG,
+		.enable_shift = CCM_PCCR_DMA_OFFSET,
+		.disable = _clk_disable,
+		.secondary = &dma_clk[1],
+	},  {
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_DMA_REG,
+		.enable_shift = CCM_PCCR_HCLK_DMA_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk brom_clk = {
+	.parent = &hclk_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_HCLK_BROM_REG,
+	.enable_shift = CCM_PCCR_HCLK_BROM_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk emma_clk[] = {
+	{
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_EMMA_REG,
+		.enable_shift = CCM_PCCR_EMMA_OFFSET,
+		.disable = _clk_disable,
+		.secondary = &emma_clk[1],
+	}, {
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_EMMA_REG,
+		.enable_shift = CCM_PCCR_HCLK_EMMA_OFFSET,
+		.disable = _clk_disable,
+	}
+};
+
+static struct clk slcdc_clk[] = {
+	{
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SLCDC_REG,
+		.enable_shift = CCM_PCCR_SLCDC_OFFSET,
+		.disable = _clk_disable,
+		.secondary = &slcdc_clk[1],
+	}, {
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_SLCDC_REG,
+		.enable_shift = CCM_PCCR_HCLK_SLCDC_OFFSET,
+		.disable = _clk_disable,
+	}
+};
+
+static struct clk wdog_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_WDT_REG,
+	.enable_shift = CCM_PCCR_WDT_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk gpio_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_GPIO_REG,
+	.enable_shift = CCM_PCCR_GPIO_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk i2c_clk = {
+	.id = 0,
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_I2C1_REG,
+	.enable_shift = CCM_PCCR_I2C1_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk kpp_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_KPP_REG,
+	.enable_shift = CCM_PCCR_KPP_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk owire_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_OWIRE_REG,
+	.enable_shift = CCM_PCCR_OWIRE_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk rtc_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_RTC_REG,
+	.enable_shift = CCM_PCCR_RTC_OFFSET,
+	.disable = _clk_disable,
+};
+
+static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_generic_round_rate(clk, rate, 8);
+}
+
+static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg = __raw_readl(CCM_PCDR0);
+
+	if (clk->parent == &usb_clk[0]) {
+		reg &= ~CCM_PCDR0_48MDIV_MASK;
+		reg |= div << CCM_PCDR0_48MDIV_OFFSET;
+	}
+	__raw_writel(reg, CCM_PCDR0);
+
+	return 0;
+}
+
+static unsigned long _clk_clko_recalc(struct clk *clk)
+{
+	u32 div = 0;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->parent == &usb_clk[0]) /* 48M */
+		div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_48MDIV_MASK
+			 >> CCM_PCDR0_48MDIV_OFFSET;
+	div++;
+
+	return parent_rate / div;
+}
+
+static struct clk clko_clk;
+
+static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
+
+	if (parent == &ckil_clk)
+		reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &fpm_clk)
+		reg |= 1 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ckih_clk)
+		reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == mpll_clk.parent)
+		reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == spll_clk.parent)
+		reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &mpll_clk)
+		reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &spll_clk)
+		reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &fclk_clk)
+		reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &hclk_clk)
+		reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ipg_clk)
+		reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[0])
+		reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[1])
+		reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[2])
+		reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[3])
+		reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ssi_clk[0])
+		reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ssi_clk[1])
+		reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &nfc_clk)
+		reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &usb_clk[0])
+		reg |= 0x14 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &clko_clk)
+		reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
+	else
+		return -EINVAL;
+
+	__raw_writel(reg, CCM_CCSR);
+
+	return 0;
+}
+
+static struct clk clko_clk = {
+	.get_rate = _clk_clko_recalc,
+	.set_rate = _clk_clko_set_rate,
+	.round_rate = _clk_clko_round_rate,
+	.set_parent = _clk_clko_set_parent,
+};
+
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+static struct clk_lookup lookups[] = {
+/* It's unlikely that any driver wants one of them directly:
+	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
+	_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
+	_REGISTER_CLOCK(NULL, "fpm", fpm_clk)
+	_REGISTER_CLOCK(NULL, "mpll", mpll_clk)
+	_REGISTER_CLOCK(NULL, "spll", spll_clk)
+	_REGISTER_CLOCK(NULL, "fclk", fclk_clk)
+	_REGISTER_CLOCK(NULL, "hclk", hclk_clk)
+	_REGISTER_CLOCK(NULL, "ipg", ipg_clk)
+*/
+	_REGISTER_CLOCK(NULL, "perclk1", per_clk[0])
+	_REGISTER_CLOCK(NULL, "perclk2", per_clk[1])
+	_REGISTER_CLOCK(NULL, "perclk3", per_clk[2])
+	_REGISTER_CLOCK(NULL, "perclk4", per_clk[3])
+	_REGISTER_CLOCK(NULL, "clko", clko_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart_clk[3])
+	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0])
+	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1])
+	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2])
+	_REGISTER_CLOCK(NULL, "pwm", pwm_clk[0])
+	_REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0])
+	_REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1])
+	_REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
+	_REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
+	_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
+	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
+	_REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
+	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
+	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
+	_REGISTER_CLOCK(NULL, "brom", brom_clk)
+	_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
+	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+	_REGISTER_CLOCK(NULL, "owire", owire_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+};
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+	u32 cscr;
+
+	external_low_reference = lref;
+	external_high_reference = href;
+
+	/* detect clock reference for both system PLL */
+	cscr = CSCR();
+	if (cscr & CCM_CSCR_MCU)
+		mpll_clk.parent = &ckih_clk;
+	else
+		mpll_clk.parent = &fpm_clk;
+
+	if (cscr & CCM_CSCR_SP)
+		spll_clk.parent = &ckih_clk;
+	else
+		spll_clk.parent = &fpm_clk;
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	/* Turn off all clock gates */
+	__raw_writel(0, CCM_PCCR0);
+	__raw_writel(CCM_PCCR_GPT1_MASK, CCM_PCCR1);
+
+	/* This turns of the serial PLL as well */
+	spll_clk.disable(&spll_clk);
+
+	/* This will propagate to all children and init all the clock rates. */
+	clk_enable(&per_clk[0]);
+	clk_enable(&gpio_clk);
+
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
+	clk_enable(&uart_clk[0]);
+#endif
+
+	mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+			MX21_INT_GPT1);
+	return 0;
+}
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
new file mode 100644
index 000000000000..5a1aa15c8a16
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx27.c
@@ -0,0 +1,763 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+#define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_UPDATE_DIS	(1 << 31)
+#define CCM_CSCR_SSI2		(1 << 23)
+#define CCM_CSCR_SSI1		(1 << 22)
+#define CCM_CSCR_VPU		(1 << 21)
+#define CCM_CSCR_MSHC           (1 << 20)
+#define CCM_CSCR_SPLLRES        (1 << 19)
+#define CCM_CSCR_MPLLRES        (1 << 18)
+#define CCM_CSCR_SP             (1 << 17)
+#define CCM_CSCR_MCU            (1 << 16)
+#define CCM_CSCR_OSC26MDIV      (1 << 4)
+#define CCM_CSCR_OSC26M         (1 << 3)
+#define CCM_CSCR_FPM            (1 << 2)
+#define CCM_CSCR_SPEN           (1 << 1)
+#define CCM_CSCR_MPEN           (1 << 0)
+
+/* i.MX27 TO 2+ */
+#define CCM_CSCR_ARM_SRC        (1 << 15)
+
+#define CCM_SPCTL1_LF           (1 << 15)
+#define CCM_SPCTL1_BRMO         (1 << 6)
+
+static struct clk mpll_main1_clk, mpll_main2_clk;
+
+static int clk_pccr_enable(struct clk *clk)
+{
+	unsigned long reg;
+
+	if (!clk->enable_reg)
+		return 0;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void clk_pccr_disable(struct clk *clk)
+{
+	unsigned long reg;
+
+	if (!clk->enable_reg)
+		return;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static int clk_spll_enable(struct clk *clk)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg |= CCM_CSCR_SPEN;
+	__raw_writel(reg, CCM_CSCR);
+
+	while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF));
+
+	return 0;
+}
+
+static void clk_spll_disable(struct clk *clk)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg &= ~CCM_CSCR_SPEN;
+	__raw_writel(reg, CCM_CSCR);
+}
+
+static int clk_cpu_set_parent(struct clk *clk, struct clk *parent)
+{
+	int cscr = __raw_readl(CCM_CSCR);
+
+	if (clk->parent == parent)
+		return 0;
+
+	if (mx27_revision() >= CHIP_REV_2_0) {
+		if (parent == &mpll_main1_clk) {
+			cscr |= CCM_CSCR_ARM_SRC;
+		} else {
+			if (parent == &mpll_main2_clk)
+				cscr &= ~CCM_CSCR_ARM_SRC;
+			else
+				return -EINVAL;
+		}
+		__raw_writel(cscr, CCM_CSCR);
+		clk->parent = parent;
+		return 0;
+	}
+	return -ENODEV;
+}
+
+static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate)
+{
+	int div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > 4)
+		div = 4;
+
+	return parent_rate / div;
+}
+
+static int set_rate_cpu(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	uint32_t reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 4 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_CSCR);
+	if (mx27_revision() >= CHIP_REV_2_0) {
+		reg &= ~(3 << 12);
+		reg |= div << 12;
+		reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
+		__raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR);
+	} else {
+		printk(KERN_ERR "Can't set CPU frequency!\n");
+	}
+
+	return 0;
+}
+
+static unsigned long round_rate_per(struct clk *clk, unsigned long rate)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > 64)
+		div = 64;
+
+	return parent_rate / div;
+}
+
+static int set_rate_per(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->id < 0 || clk->id > 3)
+		return -EINVAL;
+
+	div = parent_rate / rate;
+	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3));
+	reg |= div << (clk->id << 3);
+	__raw_writel(reg, CCM_PCDR1);
+
+	return 0;
+}
+
+static unsigned long get_rate_usb(struct clk *clk)
+{
+	unsigned long usb_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7;
+
+	return parent_rate / (usb_pdf + 1U);
+}
+
+static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf)
+{
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		pdf += 4;  /* MX27 TO2+ */
+	else
+		pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
+
+	return 2UL * parent_rate / pdf;
+}
+
+static unsigned long get_rate_ssi1(struct clk *clk)
+{
+	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f);
+}
+
+static unsigned long get_rate_ssi2(struct clk *clk)
+{
+	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f);
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+	unsigned long nfc_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
+	else
+		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
+
+	return parent_rate / (nfc_pdf + 1);
+}
+
+static unsigned long get_rate_vpu(struct clk *clk)
+{
+	unsigned long vpu_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (mx27_revision() >= CHIP_REV_2_0) {
+		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
+		vpu_pdf += 4;
+	} else {
+		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf;
+		vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
+	}
+
+	return 2UL * parent_rate / vpu_pdf;
+}
+
+static unsigned long round_rate_parent(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->round_rate(clk->parent, rate);
+}
+
+static unsigned long get_rate_parent(struct clk *clk)
+{
+	return clk_get_rate(clk->parent);
+}
+
+static int set_rate_parent(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->set_rate(clk->parent, rate);
+}
+
+/* in Hz */
+static unsigned long external_high_reference = 26000000;
+
+static unsigned long get_rate_high_reference(struct clk *clk)
+{
+	return external_high_reference;
+}
+
+/* in Hz */
+static unsigned long external_low_reference = 32768;
+
+static unsigned long get_rate_low_reference(struct clk *clk)
+{
+	return external_low_reference;
+}
+
+static unsigned long get_rate_fpm(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) * 1024;
+}
+
+static unsigned long get_rate_mpll(struct clk *clk)
+{
+	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
+			clk_get_rate(clk->parent));
+}
+
+static unsigned long get_rate_mpll_main(struct clk *clk)
+{
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	/* i.MX27 TO2:
+	 * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
+	 * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
+	 */
+	if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1)
+		return 2UL * parent_rate / 3UL;
+
+	return parent_rate;
+}
+
+static unsigned long get_rate_spll(struct clk *clk)
+{
+	uint32_t reg;
+	unsigned long rate;
+
+	rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(CCM_SPCTL0);
+
+	/* On TO2 we have to write the value back. Otherwise we
+	 * read 0 from this register the next time.
+	 */
+	if (mx27_revision() >= CHIP_REV_2_0)
+		__raw_writel(reg, CCM_SPCTL0);
+
+	return mxc_decode_pll(reg, rate);
+}
+
+static unsigned long get_rate_cpu(struct clk *clk)
+{
+	u32 div;
+	unsigned long rate;
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
+	else
+		div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (div + 1);
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+	unsigned long rate, bclk_pdf;
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
+	else
+		bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (bclk_pdf + 1);
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+	unsigned long rate, ipg_pdf;
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		return clk_get_rate(clk->parent);
+	else
+		ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (ipg_pdf + 1);
+}
+
+static unsigned long get_rate_per(struct clk *clk)
+{
+	unsigned long perclk_pdf, parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->id < 0 || clk->id > 3)
+		return 0;
+
+	perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f;
+
+	return parent_rate / (perclk_pdf + 1);
+}
+
+/*
+ * the high frequency external clock reference
+ * Default case is 26MHz. Could be changed at runtime
+ * with a call to change_external_high_reference()
+ */
+static struct clk ckih_clk = {
+	.get_rate	= get_rate_high_reference,
+};
+
+static struct clk mpll_clk = {
+	.parent		= &ckih_clk,
+	.get_rate	= get_rate_mpll,
+};
+
+/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
+ * It provides the clock source whose rate is same as MPLL
+ */
+static struct clk mpll_main1_clk = {
+	.id		= 0,
+	.parent		= &mpll_clk,
+	.get_rate	= get_rate_mpll_main,
+};
+
+/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
+ * It provides the clock source whose rate is same MPLL * 2 / 3
+ */
+static struct clk mpll_main2_clk = {
+	.id		= 1,
+	.parent		= &mpll_clk,
+	.get_rate	= get_rate_mpll_main,
+};
+
+static struct clk ahb_clk = {
+	.parent		= &mpll_main2_clk,
+	.get_rate	= get_rate_ahb,
+};
+
+static struct clk ipg_clk = {
+	.parent		= &ahb_clk,
+	.get_rate	= get_rate_ipg,
+};
+
+static struct clk cpu_clk = {
+	.parent = &mpll_main2_clk,
+	.set_parent = clk_cpu_set_parent,
+	.round_rate = round_rate_cpu,
+	.get_rate = get_rate_cpu,
+	.set_rate = set_rate_cpu,
+};
+
+static struct clk spll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = get_rate_spll,
+	.enable = clk_spll_enable,
+	.disable = clk_spll_disable,
+};
+
+/*
+ * the low frequency external clock reference
+ * Default case is 32.768kHz.
+ */
+static struct clk ckil_clk = {
+	.get_rate = get_rate_low_reference,
+};
+
+/* Output of frequency pre multiplier */
+static struct clk fpm_clk = {
+	.parent = &ckil_clk,
+	.get_rate = get_rate_fpm,
+};
+
+#define PCCR0 CCM_PCCR0
+#define PCCR1 CCM_PCCR1
+
+#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.enable		= clk_pccr_enable,	\
+		.disable	= clk_pccr_disable,	\
+		.secondary	= s,			\
+		.parent		= p,			\
+	}
+
+#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
+	static struct clk name = {				\
+		.id		= i,				\
+		.enable_reg	= er,				\
+		.enable_shift	= es,				\
+		.get_rate	= get_rate_##getsetround,	\
+		.set_rate	= set_rate_##getsetround,	\
+		.round_rate	= round_rate_##getsetround,	\
+		.enable		= clk_pccr_enable,		\
+		.disable	= clk_pccr_disable,		\
+		.secondary	= s,				\
+		.parent		= p,				\
+	}
+
+/* Forward declaration to keep the following list in order */
+static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1,
+		  dma_clk1, lcdc_clk2, vpu_clk1;
+
+/* All clocks we can gate through PCCRx in the order of PCCRx bits */
+DEFINE_CLOCK(ssi2_clk1,    1, PCCR0,  0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ssi1_clk1,    0, PCCR0,  1, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(slcdc_clk,    0, PCCR0,  2, NULL, &slcdc_clk1, &ahb_clk);
+DEFINE_CLOCK(sdhc3_clk1,   0, PCCR0,  3, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdhc2_clk1,   0, PCCR0,  4, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdhc1_clk1,   0, PCCR0,  5, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(scc_clk,      0, PCCR0,  6, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sahara2_clk,  0, PCCR0,  7, NULL, &sahara2_clk1, &ahb_clk);
+DEFINE_CLOCK(rtic_clk,     0, PCCR0,  8, NULL, &rtic_clk1, &ahb_clk);
+DEFINE_CLOCK(rtc_clk,      0, PCCR0,  9, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pwm_clk1,     0, PCCR0, 11, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(owire_clk,    0, PCCR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(mstick_clk1,  0, PCCR0, 13, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(lcdc_clk1,    0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk);
+DEFINE_CLOCK(kpp_clk,      0, PCCR0, 15, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(iim_clk,      0, PCCR0, 16, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(i2c2_clk,     1, PCCR0, 17, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(i2c1_clk,     0, PCCR0, 18, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt6_clk1,    0, PCCR0, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt5_clk1,    0, PCCR0, 20, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt4_clk1,    0, PCCR0, 21, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt3_clk1,    0, PCCR0, 22, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt2_clk1,    0, PCCR0, 23, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt1_clk1,    0, PCCR0, 24, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpio_clk,     0, PCCR0, 25, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(fec_clk,      0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk);
+DEFINE_CLOCK(emma_clk,     0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk);
+DEFINE_CLOCK(dma_clk,      0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk);
+DEFINE_CLOCK(cspi13_clk1,  0, PCCR0, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi2_clk1,   0, PCCR0, 30, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi1_clk1,   0, PCCR0, 31, NULL, NULL, &ipg_clk);
+
+DEFINE_CLOCK(mstick_clk,   0, PCCR1,  2, NULL, &mstick_clk1, &ipg_clk);
+DEFINE_CLOCK(nfc_clk,      0, PCCR1,  3, get_rate_nfc, NULL, &cpu_clk);
+DEFINE_CLOCK(ssi2_clk,     1, PCCR1,  4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk);
+DEFINE_CLOCK(ssi1_clk,     0, PCCR1,  5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk);
+DEFINE_CLOCK(vpu_clk,      0, PCCR1,  6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk);
+DEFINE_CLOCK1(per4_clk,    3, PCCR1,  7, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per3_clk,    2, PCCR1,  8, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per2_clk,    1, PCCR1,  9, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per1_clk,    0, PCCR1, 10, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK(usb_clk1,     0, PCCR1, 11, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(slcdc_clk1,   0, PCCR1, 12, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(rtic_clk1,    0, PCCR1, 14, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(lcdc_clk2,    0, PCCR1, 15, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(vpu_clk1,     0, PCCR1, 16, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(fec_clk1,     0, PCCR1, 17, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(emma_clk1,    0, PCCR1, 18, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(emi_clk,      0, PCCR1, 19, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(dma_clk1,     0, PCCR1, 20, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(csi_clk1,     0, PCCR1, 21, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(brom_clk,     0, PCCR1, 22, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(ata_clk,      0, PCCR1, 23, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(wdog_clk,     0, PCCR1, 24, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(usb_clk,      0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
+DEFINE_CLOCK(uart6_clk1,   0, PCCR1, 26, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart5_clk1,   0, PCCR1, 27, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart4_clk1,   0, PCCR1, 28, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart3_clk1,   0, PCCR1, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart2_clk1,   0, PCCR1, 30, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart1_clk1,   0, PCCR1, 31, NULL, NULL, &ipg_clk);
+
+/* Clocks we cannot directly gate, but drivers need their rates */
+DEFINE_CLOCK(cspi1_clk,    0, 0,      0, NULL, &cspi1_clk1, &per2_clk);
+DEFINE_CLOCK(cspi2_clk,    1, 0,      0, NULL, &cspi2_clk1, &per2_clk);
+DEFINE_CLOCK(cspi3_clk,    2, 0,      0, NULL, &cspi13_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc1_clk,    0, 0,      0, NULL, &sdhc1_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc2_clk,    1, 0,      0, NULL, &sdhc2_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc3_clk,    2, 0,      0, NULL, &sdhc3_clk1, &per2_clk);
+DEFINE_CLOCK(pwm_clk,      0, 0,      0, NULL, &pwm_clk1, &per1_clk);
+DEFINE_CLOCK(gpt1_clk,     0, 0,      0, NULL, &gpt1_clk1, &per1_clk);
+DEFINE_CLOCK(gpt2_clk,     1, 0,      0, NULL, &gpt2_clk1, &per1_clk);
+DEFINE_CLOCK(gpt3_clk,     2, 0,      0, NULL, &gpt3_clk1, &per1_clk);
+DEFINE_CLOCK(gpt4_clk,     3, 0,      0, NULL, &gpt4_clk1, &per1_clk);
+DEFINE_CLOCK(gpt5_clk,     4, 0,      0, NULL, &gpt5_clk1, &per1_clk);
+DEFINE_CLOCK(gpt6_clk,     5, 0,      0, NULL, &gpt6_clk1, &per1_clk);
+DEFINE_CLOCK(uart1_clk,    0, 0,      0, NULL, &uart1_clk1, &per1_clk);
+DEFINE_CLOCK(uart2_clk,    1, 0,      0, NULL, &uart2_clk1, &per1_clk);
+DEFINE_CLOCK(uart3_clk,    2, 0,      0, NULL, &uart3_clk1, &per1_clk);
+DEFINE_CLOCK(uart4_clk,    3, 0,      0, NULL, &uart4_clk1, &per1_clk);
+DEFINE_CLOCK(uart5_clk,    4, 0,      0, NULL, &uart5_clk1, &per1_clk);
+DEFINE_CLOCK(uart6_clk,    5, 0,      0, NULL, &uart6_clk1, &per1_clk);
+DEFINE_CLOCK1(lcdc_clk,    0, 0,      0, parent, &lcdc_clk1, &per3_clk);
+DEFINE_CLOCK1(csi_clk,     0, 0,      0, parent, &csi_clk1, &per4_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+	_REGISTER_CLOCK("imx-uart.5", NULL, uart6_clk)
+	_REGISTER_CLOCK(NULL, "gpt1", gpt1_clk)
+	_REGISTER_CLOCK(NULL, "gpt2", gpt2_clk)
+	_REGISTER_CLOCK(NULL, "gpt3", gpt3_clk)
+	_REGISTER_CLOCK(NULL, "gpt4", gpt4_clk)
+	_REGISTER_CLOCK(NULL, "gpt5", gpt5_clk)
+	_REGISTER_CLOCK(NULL, "gpt6", gpt6_clk)
+	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
+	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
+	_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
+	_REGISTER_CLOCK(NULL, "dma", dma_clk)
+	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+	_REGISTER_CLOCK(NULL, "brom", brom_clk)
+	_REGISTER_CLOCK(NULL, "emma", emma_clk)
+	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK(NULL, "emi", emi_clk)
+	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
+	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK(NULL, "iim", iim_clk)
+	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+	_REGISTER_CLOCK(NULL, "scc", scc_clk)
+};
+
+/* Adjust the clock path for TO2 and later */
+static void __init to2_adjust_clocks(void)
+{
+	unsigned long cscr = __raw_readl(CCM_CSCR);
+
+	if (mx27_revision() >= CHIP_REV_2_0) {
+		if (cscr & CCM_CSCR_ARM_SRC)
+			cpu_clk.parent = &mpll_main1_clk;
+
+		if (!(cscr & CCM_CSCR_SSI2))
+			ssi1_clk.parent = &spll_clk;
+
+		if (!(cscr & CCM_CSCR_SSI1))
+			ssi1_clk.parent = &spll_clk;
+
+		if (!(cscr & CCM_CSCR_VPU))
+			vpu_clk.parent = &spll_clk;
+	} else {
+		cpu_clk.parent = &mpll_clk;
+		cpu_clk.set_parent = NULL;
+		cpu_clk.round_rate = NULL;
+		cpu_clk.set_rate = NULL;
+		ahb_clk.parent = &mpll_clk;
+
+		per1_clk.parent = &mpll_clk;
+		per2_clk.parent = &mpll_clk;
+		per3_clk.parent = &mpll_clk;
+		per4_clk.parent = &mpll_clk;
+
+		ssi1_clk.parent = &mpll_clk;
+		ssi2_clk.parent = &mpll_clk;
+
+		vpu_clk.parent = &mpll_clk;
+	}
+}
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mx27_clocks_init(unsigned long fref)
+{
+	u32 cscr = __raw_readl(CCM_CSCR);
+
+	external_high_reference = fref;
+
+	/* detect clock reference for both system PLLs */
+	if (cscr & CCM_CSCR_MCU)
+		mpll_clk.parent = &ckih_clk;
+	else
+		mpll_clk.parent = &fpm_clk;
+
+	if (cscr & CCM_CSCR_SP)
+		spll_clk.parent = &ckih_clk;
+	else
+		spll_clk.parent = &fpm_clk;
+
+	to2_adjust_clocks();
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	/* Turn off all clocks we do not need */
+	__raw_writel(0, CCM_PCCR0);
+	__raw_writel((1 << 10) | (1 << 19), CCM_PCCR1);
+
+	spll_clk.disable(&spll_clk);
+
+	/* enable basic clocks */
+	clk_enable(&per1_clk);
+	clk_enable(&gpio_clk);
+	clk_enable(&emi_clk);
+	clk_enable(&iim_clk);
+
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
+	clk_enable(&uart1_clk);
+#endif
+
+	mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
+			MX27_INT_GPT1);
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c
new file mode 100644
index 000000000000..d8d3b2d84dc5
--- /dev/null
+++ b/arch/arm/mach-imx/cpu-imx27.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/*
+ * i.MX27 specific CPU detection code
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <mach/hardware.h>
+
+static int cpu_silicon_rev = -1;
+static int cpu_partnumber;
+
+#define SYS_CHIP_ID             0x00    /* The offset of CHIP ID register */
+
+static void query_silicon_parameter(void)
+{
+	u32 val;
+	/*
+	 * now we have access to the IO registers. As we need
+	 * the silicon revision very early we read it here to
+	 * avoid any further hooks
+	*/
+	val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+				+ SYS_CHIP_ID));
+
+	cpu_silicon_rev = (int)(val >> 28);
+	cpu_partnumber = (int)((val >> 12) & 0xFFFF);
+}
+
+/*
+ * Returns:
+ *	the silicon revision of the cpu
+ *	-EINVAL - not a mx27
+ */
+int mx27_revision(void)
+{
+	if (cpu_silicon_rev == -1)
+		query_silicon_parameter();
+
+	if (cpu_partnumber != 0x8821)
+		return -EINVAL;
+
+	return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx27_revision);
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
new file mode 100644
index 000000000000..a8d94f078196
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx1.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx1.h>
+#include <mach/devices-common.h>
+
+#define imx1_add_i2c_imx(pdata)		\
+	imx_add_imx_i2c(0, MX1_I2C_BASE_ADDR, SZ_4K, MX1_INT_I2C, pdata)
+
+#define imx1_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_3irq(0, MX1_UART1_BASE_ADDR, 0xd0, MX1_INT_UART1RX, MX1_INT_UART1TX, MX1_INT_UART1RTS, pdata)
+#define imx1_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_3irq(0, MX1_UART2_BASE_ADDR, 0xd0, MX1_INT_UART2RX, MX1_INT_UART2TX, MX1_INT_UART2RTS, pdata)
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
new file mode 100644
index 000000000000..42788e99d127
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx21.h>
+#include <mach/devices-common.h>
+
+#define imx21_add_i2c_imx(pdata)	\
+	imx_add_imx_i2c(0, MX2x_I2C_BASE_ADDR, SZ_4K, MX2x_INT_I2C, pdata)
+
+#define imx21_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_1irq(0, MX21_UART1_BASE_ADDR, SZ_4K, MX21_INT_UART1, pdata)
+#define imx21_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_1irq(1, MX21_UART2_BASE_ADDR, SZ_4K, MX21_INT_UART2, pdata)
+#define imx21_add_imx_uart2(pdata)	\
+	imx_add_imx_uart_1irq(2, MX21_UART3_BASE_ADDR, SZ_4K, MX21_INT_UART3, pdata)
+#define imx21_add_imx_uart3(pdata)	\
+	imx_add_imx_uart_1irq(3, MX21_UART4_BASE_ADDR, SZ_4K, MX21_INT_UART4, pdata)
+
+#define imx21_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand_v1(MX21_NFC_BASE_ADDR, MX21_INT_NANDFC, pdata)
+
+#define imx21_add_spi_imx0(pdata)	\
+	imx_add_spi_imx(0, MX21_CSPI1_BASE_ADDR, SZ_4K, MX21_INT_CSPI1, pdata)
+#define imx21_add_spi_imx1(pdata)	\
+	imx_add_spi_imx(1, MX21_CSPI2_BASE_ADDR, SZ_4K, MX21_INT_CSPI2, pdata)
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
new file mode 100644
index 000000000000..65e7bb7ec2e8
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx27.h>
+#include <mach/devices-common.h>
+
+#define imx27_add_i2c_imx0(pdata)	\
+	imx_add_imx_i2c(0, MX27_I2C1_BASE_ADDR, SZ_4K, MX27_INT_I2C1, pdata)
+#define imx27_add_i2c_imx1(pdata)	\
+	imx_add_imx_i2c(1, MX27_I2C2_BASE_ADDR, SZ_4K, MX27_INT_I2C2, pdata)
+
+#define imx27_add_imx_uart0(pdata)	\
+	imx_add_imx_uart_1irq(0, MX27_UART1_BASE_ADDR, SZ_4K, MX27_INT_UART1, pdata)
+#define imx27_add_imx_uart1(pdata)	\
+	imx_add_imx_uart_1irq(1, MX27_UART2_BASE_ADDR, SZ_4K, MX27_INT_UART2, pdata)
+#define imx27_add_imx_uart2(pdata)	\
+	imx_add_imx_uart_1irq(2, MX27_UART3_BASE_ADDR, SZ_4K, MX27_INT_UART3, pdata)
+#define imx27_add_imx_uart3(pdata)	\
+	imx_add_imx_uart_1irq(3, MX27_UART4_BASE_ADDR, SZ_4K, MX27_INT_UART4, pdata)
+#define imx27_add_imx_uart4(pdata)	\
+	imx_add_imx_uart_1irq(4, MX27_UART5_BASE_ADDR, SZ_4K, MX27_INT_UART5, pdata)
+#define imx27_add_imx_uart5(pdata)	\
+	imx_add_imx_uart_1irq(5, MX27_UART6_BASE_ADDR, SZ_4K, MX27_INT_UART6, pdata)
+
+#define imx27_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand_v1(MX27_NFC_BASE_ADDR, MX27_INT_NANDFC, pdata)
+
+#define imx27_add_spi_imx0(pdata)	\
+	imx_add_spi_imx(0, MX27_CSPI1_BASE_ADDR, SZ_4K, MX27_INT_CSPI1, pdata)
+#define imx27_add_spi_imx1(pdata)	\
+	imx_add_spi_imx(1, MX27_CSPI2_BASE_ADDR, SZ_4K, MX27_INT_CSPI2, pdata)
+#define imx27_add_spi_imx2(pdata)	\
+	imx_add_spi_imx(2, MX27_CSPI3_BASE_ADDR, SZ_4K, MX27_INT_CSPI3, pdata)
diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c
new file mode 100644
index 000000000000..9c271a752b84
--- /dev/null
+++ b/arch/arm/mach-imx/devices.c
@@ -0,0 +1,609 @@
+/*
+ * Author: MontaVista Software, Inc.
+ *       <source@mvista.com>
+ *
+ * Based on the OMAP devices.c
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial.h>
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+#if defined(CONFIG_ARCH_MX1)
+static struct resource imx1_camera_resources[] = {
+	{
+		.start  = 0x00224000,
+		.end    = 0x00224010,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = MX1_CSI_INT,
+		.end    = MX1_CSI_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 imx1_camera_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device imx1_camera_device = {
+	.name           = "mx1-camera",
+	.id             = 0, /* This is used to put cameras on this interface */
+	.dev		= {
+		.dma_mask = &imx1_camera_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource       = imx1_camera_resources,
+	.num_resources  = ARRAY_SIZE(imx1_camera_resources),
+};
+
+static struct resource imx_rtc_resources[] = {
+	{
+		.start  = 0x00204000,
+		.end    = 0x00204024,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = MX1_RTC_INT,
+		.end    = MX1_RTC_INT,
+		.flags  = IORESOURCE_IRQ,
+	}, {
+		.start  = MX1_RTC_SAMINT,
+		.end    = MX1_RTC_SAMINT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_rtc_device = {
+	.name           = "rtc-imx",
+	.id             = 0,
+	.resource       = imx_rtc_resources,
+	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
+};
+
+static struct resource imx_wdt_resources[] = {
+	{
+		.start  = 0x00201000,
+		.end    = 0x00201008,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = MX1_WDT_INT,
+		.end    = MX1_WDT_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_wdt_device = {
+	.name           = "imx-wdt",
+	.id             = 0,
+	.resource       = imx_wdt_resources,
+	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
+};
+
+static struct resource imx_usb_resources[] = {
+	{
+		.start	= 0x00212000,
+		.end	= 0x00212148,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MX1_USBD_INT0,
+		.end	= MX1_USBD_INT0,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT1,
+		.end	= MX1_USBD_INT1,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT2,
+		.end	= MX1_USBD_INT2,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT3,
+		.end	= MX1_USBD_INT3,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT4,
+		.end	= MX1_USBD_INT4,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT5,
+		.end	= MX1_USBD_INT5,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT6,
+		.end	= MX1_USBD_INT6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_usb_device = {
+	.name		= "imx_udc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(imx_usb_resources),
+	.resource	= imx_usb_resources,
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port imx_gpio_ports[] = {
+	{
+		.chip.label = "gpio-0",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
+		.irq = MX1_GPIO_INT_PORTA,
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	}, {
+		.chip.label = "gpio-1",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
+		.irq = MX1_GPIO_INT_PORTB,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	}, {
+		.chip.label = "gpio-2",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
+		.irq = MX1_GPIO_INT_PORTC,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	}, {
+		.chip.label = "gpio-3",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
+		.irq = MX1_GPIO_INT_PORTD,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+	}
+};
+
+int __init imx1_register_gpios(void)
+{
+	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
+#endif
+
+#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
+
+#ifdef CONFIG_MACH_MX27
+static struct resource mx27_camera_resources[] = {
+	{
+	       .start = MX27_CSI_BASE_ADDR,
+	       .end = MX27_CSI_BASE_ADDR + 0x1f,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MX27_EMMA_PRP_BASE_ADDR,
+	       .end = MX27_EMMA_PRP_BASE_ADDR + 0x1f,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MX27_INT_CSI,
+	       .end = MX27_INT_CSI,
+	       .flags = IORESOURCE_IRQ,
+	},{
+	       .start = MX27_INT_EMMAPRP,
+	       .end = MX27_INT_EMMAPRP,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+struct platform_device mx27_camera_device = {
+	.name = "mx2-camera",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mx27_camera_resources),
+	.resource = mx27_camera_resources,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+#endif
+
+/*
+ * General Purpose Timer
+ * - i.MX21: 3 timers
+ * - i.MX27: 6 timers
+ */
+#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq)				\
+	static struct resource timer ## n ##_resources[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		}							\
+	};								\
+									\
+	struct platform_device mxc_gpt ## n = {				\
+		.name = "imx_gpt",					\
+		.id = n,						\
+		.num_resources = ARRAY_SIZE(timer ## n ## _resources),	\
+		.resource = timer ## n ## _resources,			\
+	}
+
+/* We use gpt1 as system timer, so do not add a device for this one */
+DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
+DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
+DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
+DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
+#endif
+
+/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */
+static struct resource mxc_wdt_resources[] = {
+	{
+		.start = MX2x_WDOG_BASE_ADDR,
+		.end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_wdt = {
+	.name = "imx2-wdt",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
+	.resource = mxc_wdt_resources,
+};
+
+static struct resource mxc_w1_master_resources[] = {
+	{
+		.start = MX2x_OWIRE_BASE_ADDR,
+		.end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_w1_master_device = {
+	.name = "mxc_w1",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_w1_master_resources),
+	.resource = mxc_w1_master_resources,
+};
+
+/*
+ * lcdc:
+ * - i.MX1: the basic controller
+ * - i.MX21: to be checked
+ * - i.MX27: like i.MX1, with slightly variations
+ */
+static struct resource mxc_fb[] = {
+	{
+		.start = MX2x_LCDC_BASE_ADDR,
+		.end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX2x_INT_LCDC,
+		.end = MX2x_INT_LCDC,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* mxc lcd driver */
+struct platform_device mxc_fb_device = {
+	.name = "imx-fb",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_fb),
+	.resource = mxc_fb,
+	.dev = {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_fec_resources[] = {
+	{
+		.start = MX27_FEC_BASE_ADDR,
+		.end = MX27_FEC_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX27_INT_FEC,
+		.end = MX27_INT_FEC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_fec_device = {
+	.name = "fec",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_fec_resources),
+	.resource = mxc_fec_resources,
+};
+#endif
+
+static struct resource mxc_pwm_resources[] = {
+	{
+		.start = MX2x_PWM_BASE_ADDR,
+		.end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX2x_INT_PWM,
+		.end = MX2x_INT_PWM,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device = {
+	.name = "mxc_pwm",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
+	.resource = mxc_pwm_resources,
+};
+
+#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq)			\
+	static struct resource mxc_sdhc_resources ## n[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		}, {							\
+			.start = dmareq,				\
+			.end = dmareq,					\
+			.flags = IORESOURCE_DMA,			\
+		},							\
+	};								\
+									\
+	static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32);	\
+									\
+	struct platform_device mxc_sdhc_device ## n = {			\
+		.name = "mxc-mmc",					\
+		.id = n,						\
+		.dev = {						\
+			.dma_mask = &mxc_sdhc ## n ## _dmamask,		\
+			.coherent_dma_mask = DMA_BIT_MASK(32),		\
+		},							\
+		.num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n),	\
+		.resource = mxc_sdhc_resources ## n,		\
+	}
+
+DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
+DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
+
+#ifdef CONFIG_MACH_MX27
+static struct resource otg_resources[] = {
+	{
+		.start = MX27_USBOTG_BASE_ADDR,
+		.end = MX27_USBOTG_BASE_ADDR + 0x1ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX27_INT_USB3,
+		.end = MX27_INT_USB3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &otg_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= otg_resources,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+};
+
+/* OTG host */
+struct platform_device mxc_otg_host = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = otg_resources,
+	.num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_usbh1_resources[] = {
+	{
+		.start = MX27_USBOTG_BASE_ADDR + 0x200,
+		.end = MX27_USBOTG_BASE_ADDR + 0x3ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX27_INT_USB1,
+		.end = MX27_INT_USB1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh1 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &usbh1_dmamask,
+	},
+	.resource = mxc_usbh1_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = MX27_USBOTG_BASE_ADDR + 0x400,
+		.end = MX27_USBOTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX27_INT_USB2,
+		.end = MX27_INT_USB2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 2,
+	.dev = {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+#endif
+
+#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix)			\
+	{								\
+		.name = _name,						\
+		.start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,	\
+		.end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,		\
+		.flags = IORESOURCE_DMA,				\
+	}
+
+#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq)			\
+	static struct resource imx_ssi_resources ## n[] = {		\
+		{							\
+			.start = MX2x_SSI ## ssin ## _BASE_ADDR,	\
+			.end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f,	\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = MX2x_INT_SSI1,				\
+			.end = MX2x_INT_SSI1,				\
+			.flags = IORESOURCE_IRQ,			\
+		},							\
+		DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0),		\
+		DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0),		\
+		DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1),		\
+		DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1),		\
+	};								\
+									\
+	struct platform_device imx_ssi_device ## n = {			\
+		.name = "imx-ssi",					\
+		.id = n,						\
+		.num_resources = ARRAY_SIZE(imx_ssi_resources ## n),	\
+		.resource = imx_ssi_resources ## n,			\
+	}
+
+DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
+DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
+
+/* GPIO port description */
+#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq)				\
+	{								\
+		.chip.label = "gpio-" #n,				\
+		.irq = _irq,						\
+		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
+				n * 0x100),				\
+		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
+	}
+
+#define DEFINE_MXC_GPIO_PORT(SOC, n)					\
+	{								\
+		.chip.label = "gpio-" #n,				\
+		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
+				n * 0x100),				\
+		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
+	}
+
+#define DEFINE_MXC_GPIO_PORTS(SOC, pfx)					\
+	static struct mxc_gpio_port pfx ## _gpio_ports[] = {		\
+		DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO),	\
+		DEFINE_MXC_GPIO_PORT(SOC, 1),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 2),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 3),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 4),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 5),				\
+	}
+
+#ifdef CONFIG_MACH_MX21
+DEFINE_MXC_GPIO_PORTS(MX21, imx21);
+
+int __init imx21_register_gpios(void)
+{
+	return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
+}
+#endif
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_MXC_GPIO_PORTS(MX27, imx27);
+
+int __init imx27_register_gpios(void)
+{
+	return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
+}
+#endif
+
+#ifdef CONFIG_MACH_MX21
+static struct resource mx21_usbhc_resources[] = {
+	{
+		.start	= MX21_USBOTG_BASE_ADDR,
+		.end	= MX21_USBOTG_BASE_ADDR + SZ_8K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start		= MX21_INT_USBHOST,
+		.end		= MX21_INT_USBHOST,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx21_usbhc_device = {
+	.name		= "imx21-hcd",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &mx21_usbhc_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(mx21_usbhc_resources),
+	.resource	= mx21_usbhc_resources,
+};
+#endif
+
+static struct resource imx_kpp_resources[] = {
+	{
+		.start  = MX2x_KPP_BASE_ADDR,
+		.end    = MX2x_KPP_BASE_ADDR + 0xf,
+		.flags  = IORESOURCE_MEM
+	}, {
+		.start  = MX2x_INT_KPP,
+		.end    = MX2x_INT_KPP,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_kpp_device = {
+	.name = "imx-keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(imx_kpp_resources),
+	.resource = imx_kpp_resources,
+};
+
+#endif
diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h
new file mode 100644
index 000000000000..efd4527506a5
--- /dev/null
+++ b/arch/arm/mach-imx/devices.h
@@ -0,0 +1,32 @@
+#ifdef CONFIG_ARCH_MX1
+extern struct platform_device imx1_camera_device;
+extern struct platform_device imx_rtc_device;
+extern struct platform_device imx_wdt_device;
+extern struct platform_device imx_usb_device;
+#endif
+
+#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
+extern struct platform_device mxc_gpt1;
+extern struct platform_device mxc_gpt2;
+#ifdef CONFIG_MACH_MX27
+extern struct platform_device mxc_gpt3;
+extern struct platform_device mxc_gpt4;
+extern struct platform_device mxc_gpt5;
+#endif
+extern struct platform_device mxc_wdt;
+extern struct platform_device mxc_w1_master_device;
+extern struct platform_device mxc_fb_device;
+extern struct platform_device mxc_fec_device;
+extern struct platform_device mxc_pwm_device;
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mx27_camera_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mx21_usbhc_device;
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
+extern struct platform_device imx_kpp_device;
+#endif
diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c
new file mode 100644
index 000000000000..fd1d9197d06e
--- /dev/null
+++ b/arch/arm/mach-imx/dma-v1.c
@@ -0,0 +1,863 @@
+/*
+ *  linux/arch/arm/plat-mxc/dma-v1.c
+ *
+ *  i.MX DMA registration and IRQ dispatching
+ *
+ * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
+ * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
+ * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/scatterlist.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/dma-v1.h>
+
+#define DMA_DCR     0x00		/* Control Register */
+#define DMA_DISR    0x04		/* Interrupt status Register */
+#define DMA_DIMR    0x08		/* Interrupt mask Register */
+#define DMA_DBTOSR  0x0c		/* Burst timeout status Register */
+#define DMA_DRTOSR  0x10		/* Request timeout Register */
+#define DMA_DSESR   0x14		/* Transfer Error Status Register */
+#define DMA_DBOSR   0x18		/* Buffer overflow status Register */
+#define DMA_DBTOCR  0x1c		/* Burst timeout control Register */
+#define DMA_WSRA    0x40		/* W-Size Register A */
+#define DMA_XSRA    0x44		/* X-Size Register A */
+#define DMA_YSRA    0x48		/* Y-Size Register A */
+#define DMA_WSRB    0x4c		/* W-Size Register B */
+#define DMA_XSRB    0x50		/* X-Size Register B */
+#define DMA_YSRB    0x54		/* Y-Size Register B */
+#define DMA_SAR(x)  (0x80 + ((x) << 6))	/* Source Address Registers */
+#define DMA_DAR(x)  (0x84 + ((x) << 6))	/* Destination Address Registers */
+#define DMA_CNTR(x) (0x88 + ((x) << 6))	/* Count Registers */
+#define DMA_CCR(x)  (0x8c + ((x) << 6))	/* Control Registers */
+#define DMA_RSSR(x) (0x90 + ((x) << 6))	/* Request source select Registers */
+#define DMA_BLR(x)  (0x94 + ((x) << 6))	/* Burst length Registers */
+#define DMA_RTOR(x) (0x98 + ((x) << 6))	/* Request timeout Registers */
+#define DMA_BUCR(x) (0x98 + ((x) << 6))	/* Bus Utilization Registers */
+#define DMA_CCNR(x) (0x9C + ((x) << 6))	/* Channel counter Registers */
+
+#define DCR_DRST           (1<<1)
+#define DCR_DEN            (1<<0)
+#define DBTOCR_EN          (1<<15)
+#define DBTOCR_CNT(x)      ((x) & 0x7fff)
+#define CNTR_CNT(x)        ((x) & 0xffffff)
+#define CCR_ACRPT          (1<<14)
+#define CCR_DMOD_LINEAR    (0x0 << 12)
+#define CCR_DMOD_2D        (0x1 << 12)
+#define CCR_DMOD_FIFO      (0x2 << 12)
+#define CCR_DMOD_EOBFIFO   (0x3 << 12)
+#define CCR_SMOD_LINEAR    (0x0 << 10)
+#define CCR_SMOD_2D        (0x1 << 10)
+#define CCR_SMOD_FIFO      (0x2 << 10)
+#define CCR_SMOD_EOBFIFO   (0x3 << 10)
+#define CCR_MDIR_DEC       (1<<9)
+#define CCR_MSEL_B         (1<<8)
+#define CCR_DSIZ_32        (0x0 << 6)
+#define CCR_DSIZ_8         (0x1 << 6)
+#define CCR_DSIZ_16        (0x2 << 6)
+#define CCR_SSIZ_32        (0x0 << 4)
+#define CCR_SSIZ_8         (0x1 << 4)
+#define CCR_SSIZ_16        (0x2 << 4)
+#define CCR_REN            (1<<3)
+#define CCR_RPT            (1<<2)
+#define CCR_FRC            (1<<1)
+#define CCR_CEN            (1<<0)
+#define RTOR_EN            (1<<15)
+#define RTOR_CLK           (1<<14)
+#define RTOR_PSC           (1<<13)
+
+/*
+ * struct imx_dma_channel - i.MX specific DMA extension
+ * @name: name specified by DMA client
+ * @irq_handler: client callback for end of transfer
+ * @err_handler: client callback for error condition
+ * @data: clients context data for callbacks
+ * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
+ * @sg: pointer to the actual read/written chunk for scatter-gather emulation
+ * @resbytes: total residual number of bytes to transfer
+ *            (it can be lower or same as sum of SG mapped chunk sizes)
+ * @sgcount: number of chunks to be read/written
+ *
+ * Structure is used for IMX DMA processing. It would be probably good
+ * @struct dma_struct in the future for external interfacing and use
+ * @struct imx_dma_channel only as extension to it.
+ */
+
+struct imx_dma_channel {
+	const char *name;
+	void (*irq_handler) (int, void *);
+	void (*err_handler) (int, void *, int errcode);
+	void (*prog_handler) (int, void *, struct scatterlist *);
+	void *data;
+	unsigned int dma_mode;
+	struct scatterlist *sg;
+	unsigned int resbytes;
+	int dma_num;
+
+	int in_use;
+
+	u32 ccr_from_device;
+	u32 ccr_to_device;
+
+	struct timer_list watchdog;
+
+	int hw_chaining;
+};
+
+static void __iomem *imx_dmav1_baseaddr;
+
+static void imx_dmav1_writel(unsigned val, unsigned offset)
+{
+	__raw_writel(val, imx_dmav1_baseaddr + offset);
+}
+
+static unsigned imx_dmav1_readl(unsigned offset)
+{
+	return __raw_readl(imx_dmav1_baseaddr + offset);
+}
+
+static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
+
+static struct clk *dma_clk;
+
+static int imx_dma_hw_chain(struct imx_dma_channel *imxdma)
+{
+	if (cpu_is_mx27())
+		return imxdma->hw_chaining;
+	else
+		return 0;
+}
+
+/*
+ * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
+ */
+static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long now;
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
+		       __func__, channel);
+		return 0;
+	}
+
+	now = min(imxdma->resbytes, sg->length);
+	if (imxdma->resbytes != IMX_DMA_LENGTH_LOOP)
+		imxdma->resbytes -= now;
+
+	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
+		imx_dmav1_writel(sg->dma_address, DMA_DAR(channel));
+	else
+		imx_dmav1_writel(sg->dma_address, DMA_SAR(channel));
+
+	imx_dmav1_writel(now, DMA_CNTR(channel));
+
+	pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, "
+		"size 0x%08x\n", channel,
+		 imx_dmav1_readl(DMA_DAR(channel)),
+		 imx_dmav1_readl(DMA_SAR(channel)),
+		 imx_dmav1_readl(DMA_CNTR(channel)));
+
+	return now;
+}
+
+/**
+ * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from
+ * device transfer
+ *
+ * @channel: i.MX DMA channel number
+ * @dma_address: the DMA/physical memory address of the linear data block
+ *		to transfer
+ * @dma_length: length of the data block in bytes
+ * @dev_addr: physical device port address
+ * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
+ *           or %DMA_MODE_WRITE from memory to the device
+ *
+ * Return value: if incorrect parameters are provided -%EINVAL.
+ *		Zero indicates success.
+ */
+int
+imx_dma_setup_single(int channel, dma_addr_t dma_address,
+		     unsigned int dma_length, unsigned int dev_addr,
+		     unsigned int dmamode)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+
+	imxdma->sg = NULL;
+	imxdma->dma_mode = dmamode;
+
+	if (!dma_address) {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	if (!dma_length) {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
+		pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
+			"dev_addr=0x%08x for read\n",
+			channel, __func__, (unsigned int)dma_address,
+			dma_length, dev_addr);
+
+		imx_dmav1_writel(dev_addr, DMA_SAR(channel));
+		imx_dmav1_writel(dma_address, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
+	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
+		pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
+			"dev_addr=0x%08x for write\n",
+			channel, __func__, (unsigned int)dma_address,
+			dma_length, dev_addr);
+
+		imx_dmav1_writel(dma_address, DMA_SAR(channel));
+		imx_dmav1_writel(dev_addr, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_to_device,
+				DMA_CCR(channel));
+	} else {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	imx_dmav1_writel(dma_length, DMA_CNTR(channel));
+
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_single);
+
+/**
+ * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
+ * @channel: i.MX DMA channel number
+ * @sg: pointer to the scatter-gather list/vector
+ * @sgcount: scatter-gather list hungs count
+ * @dma_length: total length of the transfer request in bytes
+ * @dev_addr: physical device port address
+ * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
+ *           or %DMA_MODE_WRITE from memory to the device
+ *
+ * The function sets up DMA channel state and registers to be ready for
+ * transfer specified by provided parameters. The scatter-gather emulation
+ * is set up according to the parameters.
+ *
+ * The full preparation of the transfer requires setup of more register
+ * by the caller before imx_dma_enable() can be called.
+ *
+ * %BLR(channel) holds transfer burst length in bytes, 0 means 64 bytes
+ *
+ * %RSSR(channel) has to be set to the DMA request line source %DMA_REQ_xxx
+ *
+ * %CCR(channel) has to specify transfer parameters, the next settings is
+ * typical for linear or simple scatter-gather transfers if %DMA_MODE_READ is
+ * specified
+ *
+ * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
+ *
+ * The typical setup for %DMA_MODE_WRITE is specified by next options
+ * combination
+ *
+ * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
+ *
+ * Be careful here and do not mistakenly mix source and target device
+ * port sizes constants, they are really different:
+ * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
+ * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
+ *
+ * Return value: if incorrect parameters are provided -%EINVAL.
+ * Zero indicates success.
+ */
+int
+imx_dma_setup_sg(int channel,
+		 struct scatterlist *sg, unsigned int sgcount,
+		 unsigned int dma_length, unsigned int dev_addr,
+		 unsigned int dmamode)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+
+	if (imxdma->in_use)
+		return -EBUSY;
+
+	imxdma->sg = sg;
+	imxdma->dma_mode = dmamode;
+	imxdma->resbytes = dma_length;
+
+	if (!sg || !sgcount) {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	if (!sg->length) {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
+		pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
+			"dev_addr=0x%08x for read\n",
+			channel, __func__, sg, sgcount, dma_length, dev_addr);
+
+		imx_dmav1_writel(dev_addr, DMA_SAR(channel));
+		imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
+	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
+		pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
+			"dev_addr=0x%08x for write\n",
+			channel, __func__, sg, sgcount, dma_length, dev_addr);
+
+		imx_dmav1_writel(dev_addr, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel));
+	} else {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	imx_dma_sg_next(channel, sg);
+
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_sg);
+
+int
+imx_dma_config_channel(int channel, unsigned int config_port,
+	unsigned int config_mem, unsigned int dmareq, int hw_chaining)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	u32 dreq = 0;
+
+	imxdma->hw_chaining = 0;
+
+	if (hw_chaining) {
+		imxdma->hw_chaining = 1;
+		if (!imx_dma_hw_chain(imxdma))
+			return -EINVAL;
+	}
+
+	if (dmareq)
+		dreq = CCR_REN;
+
+	imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq;
+	imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq;
+
+	imx_dmav1_writel(dmareq, DMA_RSSR(channel));
+
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_config_channel);
+
+void imx_dma_config_burstlen(int channel, unsigned int burstlen)
+{
+	imx_dmav1_writel(burstlen, DMA_BLR(channel));
+}
+EXPORT_SYMBOL(imx_dma_config_burstlen);
+
+/**
+ * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification
+ * handlers
+ * @channel: i.MX DMA channel number
+ * @irq_handler: the pointer to the function called if the transfer
+ *		ends successfully
+ * @err_handler: the pointer to the function called if the premature
+ *		end caused by error occurs
+ * @data: user specified value to be passed to the handlers
+ */
+int
+imx_dma_setup_handlers(int channel,
+		       void (*irq_handler) (int, void *),
+		       void (*err_handler) (int, void *, int),
+		       void *data)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
+		       __func__, channel);
+		return -ENODEV;
+	}
+
+	local_irq_save(flags);
+	imx_dmav1_writel(1 << channel, DMA_DISR);
+	imxdma->irq_handler = irq_handler;
+	imxdma->err_handler = err_handler;
+	imxdma->data = data;
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_handlers);
+
+/**
+ * imx_dma_setup_progression_handler - setup i.MX DMA channel progression
+ * handlers
+ * @channel: i.MX DMA channel number
+ * @prog_handler: the pointer to the function called if the transfer progresses
+ */
+int
+imx_dma_setup_progression_handler(int channel,
+			void (*prog_handler) (int, void*, struct scatterlist*))
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
+		       __func__, channel);
+		return -ENODEV;
+	}
+
+	local_irq_save(flags);
+	imxdma->prog_handler = prog_handler;
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_progression_handler);
+
+/**
+ * imx_dma_enable - function to start i.MX DMA channel operation
+ * @channel: i.MX DMA channel number
+ *
+ * The channel has to be allocated by driver through imx_dma_request()
+ * or imx_dma_request_by_prio() function.
+ * The transfer parameters has to be set to the channel registers through
+ * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
+ * and registers %BLR(channel), %RSSR(channel) and %CCR(channel) has to
+ * be set prior this function call by the channel user.
+ */
+void imx_dma_enable(int channel)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+
+	pr_debug("imxdma%d: imx_dma_enable\n", channel);
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
+		       __func__, channel);
+		return;
+	}
+
+	if (imxdma->in_use)
+		return;
+
+	local_irq_save(flags);
+
+	imx_dmav1_writel(1 << channel, DMA_DISR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN |
+		CCR_ACRPT, DMA_CCR(channel));
+
+#ifdef CONFIG_ARCH_MX2
+	if ((cpu_is_mx21() || cpu_is_mx27()) &&
+			imxdma->sg && imx_dma_hw_chain(imxdma)) {
+		imxdma->sg = sg_next(imxdma->sg);
+		if (imxdma->sg) {
+			u32 tmp;
+			imx_dma_sg_next(channel, imxdma->sg);
+			tmp = imx_dmav1_readl(DMA_CCR(channel));
+			imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT,
+				DMA_CCR(channel));
+		}
+	}
+#endif
+	imxdma->in_use = 1;
+
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(imx_dma_enable);
+
+/**
+ * imx_dma_disable - stop, finish i.MX DMA channel operatin
+ * @channel: i.MX DMA channel number
+ */
+void imx_dma_disable(int channel)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+
+	pr_debug("imxdma%d: imx_dma_disable\n", channel);
+
+	if (imx_dma_hw_chain(imxdma))
+		del_timer(&imxdma->watchdog);
+
+	local_irq_save(flags);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN,
+			DMA_CCR(channel));
+	imx_dmav1_writel(1 << channel, DMA_DISR);
+	imxdma->in_use = 0;
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(imx_dma_disable);
+
+#ifdef CONFIG_ARCH_MX2
+static void imx_dma_watchdog(unsigned long chno)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
+
+	imx_dmav1_writel(0, DMA_CCR(chno));
+	imxdma->in_use = 0;
+	imxdma->sg = NULL;
+
+	if (imxdma->err_handler)
+		imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT);
+}
+#endif
+
+static irqreturn_t dma_err_handler(int irq, void *dev_id)
+{
+	int i, disr;
+	struct imx_dma_channel *imxdma;
+	unsigned int err_mask;
+	int errcode;
+
+	disr = imx_dmav1_readl(DMA_DISR);
+
+	err_mask = imx_dmav1_readl(DMA_DBTOSR) |
+		   imx_dmav1_readl(DMA_DRTOSR) |
+		   imx_dmav1_readl(DMA_DSESR)  |
+		   imx_dmav1_readl(DMA_DBOSR);
+
+	if (!err_mask)
+		return IRQ_HANDLED;
+
+	imx_dmav1_writel(disr & err_mask, DMA_DISR);
+
+	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
+		if (!(err_mask & (1 << i)))
+			continue;
+		imxdma = &imx_dma_channels[i];
+		errcode = 0;
+
+		if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DBTOSR);
+			errcode |= IMX_DMA_ERR_BURST;
+		}
+		if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DRTOSR);
+			errcode |= IMX_DMA_ERR_REQUEST;
+		}
+		if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DSESR);
+			errcode |= IMX_DMA_ERR_TRANSFER;
+		}
+		if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DBOSR);
+			errcode |= IMX_DMA_ERR_BUFFER;
+		}
+		if (imxdma->name && imxdma->err_handler) {
+			imxdma->err_handler(i, imxdma->data, errcode);
+			continue;
+		}
+
+		imx_dma_channels[i].sg = NULL;
+
+		printk(KERN_WARNING
+		       "DMA timeout on channel %d (%s) -%s%s%s%s\n",
+		       i, imxdma->name,
+		       errcode & IMX_DMA_ERR_BURST ?    " burst" : "",
+		       errcode & IMX_DMA_ERR_REQUEST ?  " request" : "",
+		       errcode & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
+		       errcode & IMX_DMA_ERR_BUFFER ?   " buffer" : "");
+	}
+	return IRQ_HANDLED;
+}
+
+static void dma_irq_handle_channel(int chno)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
+
+	if (!imxdma->name) {
+		/*
+		 * IRQ for an unregistered DMA channel:
+		 * let's clear the interrupts and disable it.
+		 */
+		printk(KERN_WARNING
+		       "spurious IRQ for DMA channel %d\n", chno);
+		return;
+	}
+
+	if (imxdma->sg) {
+		u32 tmp;
+		struct scatterlist *current_sg = imxdma->sg;
+		imxdma->sg = sg_next(imxdma->sg);
+
+		if (imxdma->sg) {
+			imx_dma_sg_next(chno, imxdma->sg);
+
+			tmp = imx_dmav1_readl(DMA_CCR(chno));
+
+			if (imx_dma_hw_chain(imxdma)) {
+				/* FIXME: The timeout should probably be
+				 * configurable
+				 */
+				mod_timer(&imxdma->watchdog,
+					jiffies + msecs_to_jiffies(500));
+
+				tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT;
+				imx_dmav1_writel(tmp, DMA_CCR(chno));
+			} else {
+				imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno));
+				tmp |= CCR_CEN;
+			}
+
+			imx_dmav1_writel(tmp, DMA_CCR(chno));
+
+			if (imxdma->prog_handler)
+				imxdma->prog_handler(chno, imxdma->data,
+						current_sg);
+
+			return;
+		}
+
+		if (imx_dma_hw_chain(imxdma)) {
+			del_timer(&imxdma->watchdog);
+			return;
+		}
+	}
+
+	imx_dmav1_writel(0, DMA_CCR(chno));
+	imxdma->in_use = 0;
+	if (imxdma->irq_handler)
+		imxdma->irq_handler(chno, imxdma->data);
+}
+
+static irqreturn_t dma_irq_handler(int irq, void *dev_id)
+{
+	int i, disr;
+
+#ifdef CONFIG_ARCH_MX2
+	if (cpu_is_mx21() || cpu_is_mx27())
+		dma_err_handler(irq, dev_id);
+#endif
+
+	disr = imx_dmav1_readl(DMA_DISR);
+
+	pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
+		     disr);
+
+	imx_dmav1_writel(disr, DMA_DISR);
+	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
+		if (disr & (1 << i))
+			dma_irq_handle_channel(i);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * imx_dma_request - request/allocate specified channel number
+ * @channel: i.MX DMA channel number
+ * @name: the driver/caller own non-%NULL identification
+ */
+int imx_dma_request(int channel, const char *name)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+	int ret = 0;
+
+	/* basic sanity checks */
+	if (!name)
+		return -EINVAL;
+
+	if (channel >= IMX_DMA_CHANNELS) {
+		printk(KERN_CRIT "%s: called for  non-existed channel %d\n",
+		       __func__, channel);
+		return -EINVAL;
+	}
+
+	local_irq_save(flags);
+	if (imxdma->name) {
+		local_irq_restore(flags);
+		return -EBUSY;
+	}
+	memset(imxdma, 0, sizeof(imxdma));
+	imxdma->name = name;
+	local_irq_restore(flags); /* request_irq() can block */
+
+#ifdef CONFIG_ARCH_MX2
+	if (cpu_is_mx21() || cpu_is_mx27()) {
+		ret = request_irq(MX2x_INT_DMACH0 + channel,
+				dma_irq_handler, 0, "DMA", NULL);
+		if (ret) {
+			imxdma->name = NULL;
+			pr_crit("Can't register IRQ %d for DMA channel %d\n",
+					MX2x_INT_DMACH0 + channel, channel);
+			return ret;
+		}
+		init_timer(&imxdma->watchdog);
+		imxdma->watchdog.function = &imx_dma_watchdog;
+		imxdma->watchdog.data = channel;
+	}
+#endif
+
+	return ret;
+}
+EXPORT_SYMBOL(imx_dma_request);
+
+/**
+ * imx_dma_free - release previously acquired channel
+ * @channel: i.MX DMA channel number
+ */
+void imx_dma_free(int channel)
+{
+	unsigned long flags;
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT
+		       "%s: trying to free free channel %d\n",
+		       __func__, channel);
+		return;
+	}
+
+	local_irq_save(flags);
+	/* Disable interrupts */
+	imx_dma_disable(channel);
+	imxdma->name = NULL;
+
+#ifdef CONFIG_ARCH_MX2
+	if (cpu_is_mx21() || cpu_is_mx27())
+		free_irq(MX2x_INT_DMACH0 + channel, NULL);
+#endif
+
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(imx_dma_free);
+
+/**
+ * imx_dma_request_by_prio - find and request some of free channels best
+ * suiting requested priority
+ * @channel: i.MX DMA channel number
+ * @name: the driver/caller own non-%NULL identification
+ *
+ * This function tries to find a free channel in the specified priority group
+ * This function tries to find a free channel in the specified priority group
+ * if the priority cannot be achieved it tries to look for free channel
+ * in the higher and then even lower priority groups.
+ *
+ * Return value: If there is no free channel to allocate, -%ENODEV is returned.
+ *               On successful allocation channel is returned.
+ */
+int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio)
+{
+	int i;
+	int best;
+
+	switch (prio) {
+	case (DMA_PRIO_HIGH):
+		best = 8;
+		break;
+	case (DMA_PRIO_MEDIUM):
+		best = 4;
+		break;
+	case (DMA_PRIO_LOW):
+	default:
+		best = 0;
+		break;
+	}
+
+	for (i = best; i < IMX_DMA_CHANNELS; i++)
+		if (!imx_dma_request(i, name))
+			return i;
+
+	for (i = best - 1; i >= 0; i--)
+		if (!imx_dma_request(i, name))
+			return i;
+
+	printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
+
+	return -ENODEV;
+}
+EXPORT_SYMBOL(imx_dma_request_by_prio);
+
+static int __init imx_dma_init(void)
+{
+	int ret = 0;
+	int i;
+
+#ifdef CONFIG_ARCH_MX1
+	if (cpu_is_mx1())
+		imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
+	else
+#endif
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21())
+		imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
+	else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
+	else
+#endif
+		BUG();
+
+	dma_clk = clk_get(NULL, "dma");
+	clk_enable(dma_clk);
+
+	/* reset DMA module */
+	imx_dmav1_writel(DCR_DRST, DMA_DCR);
+
+#ifdef CONFIG_ARCH_MX1
+	if (cpu_is_mx1()) {
+		ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL);
+		if (ret) {
+			pr_crit("Wow!  Can't register IRQ for DMA\n");
+			return ret;
+		}
+
+		ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL);
+		if (ret) {
+			pr_crit("Wow!  Can't register ERRIRQ for DMA\n");
+			free_irq(MX1_DMA_INT, NULL);
+			return ret;
+		}
+	}
+#endif
+	/* enable DMA module */
+	imx_dmav1_writel(DCR_DEN, DMA_DCR);
+
+	/* clear all interrupts */
+	imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR);
+
+	/* disable interrupts */
+	imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR);
+
+	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
+		imx_dma_channels[i].sg = NULL;
+		imx_dma_channels[i].dma_num = i;
+	}
+
+	return ret;
+}
+
+arch_initcall(imx_dma_init);
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
new file mode 100644
index 000000000000..27e7226ec9d4
--- /dev/null
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -0,0 +1,392 @@
+/*
+ * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/backlight.h>
+#include <video/platform_lcd.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx27.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/spi.h>
+#include <mach/ssi.h>
+#include <mach/audmux.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+static int eukrea_mbimx27_pins[] = {
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART4 */
+#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+#endif
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* SPI1 */
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+	/* SSI4 */
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
+	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
+	PC16_PF_SSI4_FS,
+	PC17_PF_SSI4_RXD | GPIO_PUEN,
+	PC18_PF_SSI4_TXD | GPIO_PUEN,
+	PC19_PF_SSI4_CLK,
+#endif
+};
+
+static const uint32_t eukrea_mbimx27_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+};
+
+static struct matrix_keymap_data eukrea_mbimx27_keymap_data = {
+	.keymap         = eukrea_mbimx27_keymap,
+	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 16,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "none",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 19,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
+	{
+		.mode = {
+			.name		= "CMO-QVGA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= 156000,
+			.hsync_len	= 30,
+			.left_margin	= 38,
+			.right_margin	= 20,
+			.vsync_len	= 3,
+			.upper_margin	= 15,
+			.lower_margin	= 4,
+		},
+		.pcr		= 0xFAD08B80,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "DVI-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 32000,
+			.hsync_len	= 1,
+			.left_margin	= 35,
+			.right_margin	= 0,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 0,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "DVI-SVGA",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 600,
+			.pixclock	= 25000,
+			.hsync_len	= 1,
+			.left_margin	= 35,
+			.right_margin	= 0,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 0,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	},
+};
+
+static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+	.mode = eukrea_mbimx27_modes,
+	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static void eukrea_mbimx27_bl_set_intensity(int intensity)
+{
+	if (intensity)
+		gpio_direction_output(GPIO_PORTE | 5, 1);
+	else
+		gpio_direction_output(GPIO_PORTE | 5, 0);
+}
+
+static struct generic_bl_info eukrea_mbimx27_bl_info = {
+	.name			= "eukrea_mbimx27-bl",
+	.max_intensity		= 0xff,
+	.default_intensity	= 0xff,
+	.set_bl_intensity	= eukrea_mbimx27_bl_set_intensity,
+};
+
+static struct platform_device eukrea_mbimx27_bl_dev = {
+	.name			= "generic-bl",
+	.id			= 1,
+	.dev = {
+		.platform_data	= &eukrea_mbimx27_bl_info,
+	},
+};
+
+static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_PORTA | 25, 1);
+	else
+		gpio_direction_output(GPIO_PORTA | 25, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
+	.set_power		= eukrea_mbimx27_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimx27_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimx27_lcd_power_data,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#define ADS7846_PENDOWN (GPIO_PORTD | 25)
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+	gpio_direction_input(ADS7846_PENDOWN);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ADS7846_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+#endif
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "ads7846",
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 1500000,
+		.irq		= IRQ_GPIOD(25),
+		.platform_data	= &ads7846_config,
+		.mode           = SPI_MODE_2,
+	},
+};
+
+static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
+
+static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
+	.chipselect	= eukrea_mbimx27_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
+};
+#endif
+
+static struct platform_device *platform_devices[] __initdata = {
+	&leds_gpio,
+};
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.dat3_card_detect = 1,
+};
+
+struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata = {
+	.flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx27 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimx27_baseboard_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
+		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
+
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
+	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
+	/* SSI unit master I2S codec connected to SSI_PINS_4*/
+	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+			MXC_AUDMUX_V1_PCR_SYN |
+			MXC_AUDMUX_V1_PCR_TFSDIR |
+			MXC_AUDMUX_V1_PCR_TCLKDIR |
+			MXC_AUDMUX_V1_PCR_RFSDIR |
+			MXC_AUDMUX_V1_PCR_RCLKDIR |
+			MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
+			MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
+			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4)
+	);
+	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4,
+			MXC_AUDMUX_V1_PCR_SYN |
+			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
+	);
+#endif
+
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
+#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
+	imx27_add_imx_uart3(&uart_pdata);
+#endif
+
+	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
+
+	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
+
+	mxc_register_device(&imx_ssi_device0, &eukrea_mbimx27_ssi_pdata);
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	/* ADS7846 Touchscreen controller init */
+	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
+	ads7846_dev_init();
+#endif
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	/* SPI_CS0 init */
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
+	spi_register_board_info(eukrea_mbimx27_spi_board_info,
+			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
+#endif
+
+	/* Leds configuration */
+	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
+	/* Backlight */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+	gpio_request(GPIO_PORTE | 5, "backlight");
+	platform_device_register(&eukrea_mbimx27_bl_dev);
+	/* LCD Reset */
+	mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
+	gpio_request(GPIO_PORTA | 25, "lcd_enable");
+	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
+
+	mxc_register_device(&imx_kpp_device, &eukrea_mbimx27_keymap_data);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
new file mode 100644
index 000000000000..df5f522da6b3
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
@@ -0,0 +1,10 @@
+#ifndef __MACH_DMA_MX1_MX2_H__
+#define __MACH_DMA_MX1_MX2_H__
+/*
+ * Don't use this header in new code, it will go away when all users are
+ * converted to mach/dma-v1.h
+ */
+
+#include <mach/dma-v1.h>
+
+#endif /* ifndef __MACH_DMA_MX1_MX2_H__ */
diff --git a/arch/arm/mach-imx/include/mach/dma-v1.h b/arch/arm/mach-imx/include/mach/dma-v1.h
new file mode 100644
index 000000000000..287431cc13e5
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/dma-v1.h
@@ -0,0 +1,107 @@
+/*
+ *  linux/arch/arm/mach-imx/include/mach/dma-v1.h
+ *
+ *  i.MX DMA registration and IRQ dispatching
+ *
+ * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
+ * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
+ * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_DMA_V1_H__
+#define __MACH_DMA_V1_H__
+
+#define imx_has_dma_v1()	(cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
+
+#define IMX_DMA_CHANNELS  16
+
+#define DMA_MODE_READ		0
+#define DMA_MODE_WRITE		1
+#define DMA_MODE_MASK		1
+
+#define MX1_DMA_REG(offset)	MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset))
+
+/* DMA Interrupt Mask Register */
+#define MX1_DMA_DIMR		MX1_DMA_REG(0x08)
+
+/* Channel Control Register */
+#define MX1_DMA_CCR(x)		MX1_DMA_REG(0x8c + ((x) << 6))
+
+#define IMX_DMA_MEMSIZE_32	(0 << 4)
+#define IMX_DMA_MEMSIZE_8	(1 << 4)
+#define IMX_DMA_MEMSIZE_16	(2 << 4)
+#define IMX_DMA_TYPE_LINEAR	(0 << 10)
+#define IMX_DMA_TYPE_2D		(1 << 10)
+#define IMX_DMA_TYPE_FIFO	(2 << 10)
+
+#define IMX_DMA_ERR_BURST     (1 << 0)
+#define IMX_DMA_ERR_REQUEST   (1 << 1)
+#define IMX_DMA_ERR_TRANSFER  (1 << 2)
+#define IMX_DMA_ERR_BUFFER    (1 << 3)
+#define IMX_DMA_ERR_TIMEOUT   (1 << 4)
+
+int
+imx_dma_config_channel(int channel, unsigned int config_port,
+	unsigned int config_mem, unsigned int dmareq, int hw_chaining);
+
+void
+imx_dma_config_burstlen(int channel, unsigned int burstlen);
+
+int
+imx_dma_setup_single(int channel, dma_addr_t dma_address,
+		unsigned int dma_length, unsigned int dev_addr,
+		unsigned int dmamode);
+
+
+/*
+ * Use this flag as the dma_length argument to imx_dma_setup_sg()
+ * to create an endless running dma loop. The end of the scatterlist
+ * must be linked to the beginning for this to work.
+ */
+#define IMX_DMA_LENGTH_LOOP	((unsigned int)-1)
+
+int
+imx_dma_setup_sg(int channel, struct scatterlist *sg,
+		unsigned int sgcount, unsigned int dma_length,
+		unsigned int dev_addr, unsigned int dmamode);
+
+int
+imx_dma_setup_handlers(int channel,
+		void (*irq_handler) (int, void *),
+		void (*err_handler) (int, void *, int), void *data);
+
+int
+imx_dma_setup_progression_handler(int channel,
+		void (*prog_handler) (int, void*, struct scatterlist*));
+
+void imx_dma_enable(int channel);
+
+void imx_dma_disable(int channel);
+
+int imx_dma_request(int channel, const char *name);
+
+void imx_dma_free(int channel);
+
+enum imx_dma_prio {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+};
+
+int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio);
+
+#endif	/* __MACH_DMA_V1_H__ */
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
new file mode 100644
index 000000000000..2a135449e52c
--- /dev/null
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -0,0 +1,317 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx27.h>
+#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART4 */
+#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+#endif
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SDHC2 */
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+#endif
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	/* Quad UART's IRQ */
+	GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+	/* OTG */
+	PC7_PF_USBOTG_DATA5,
+	PC8_PF_USBOTG_DATA6,
+	PC9_PF_USBOTG_DATA0,
+	PC10_PF_USBOTG_DATA2,
+	PC11_PF_USBOTG_DATA1,
+	PC12_PF_USBOTG_DATA4,
+	PC13_PF_USBOTG_DATA3,
+	PE0_PF_USBOTG_NXT,
+	PE1_PF_USBOTG_STP,
+	PE2_PF_USBOTG_DIR,
+	PE24_PF_USBOTG_CLK,
+	PE25_PF_USBOTG_DATA7,
+	/* USBH2 */
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+	.width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+	.start = 0xc0000000,
+	.end   = 0xc3ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &eukrea_cpuimx27_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct mxc_nand_platform_data
+cpuimx27_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_cpuimx27_nor_mtd_device,
+	&mxc_fec_device,
+	&mxc_wdt,
+	&mxc_w1_master_device,
+};
+
+static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
+		.irq = IRQ_GPIOB(23),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
+		.irq = IRQ_GPIOB(22),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
+		.irq = IRQ_GPIOB(27),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
+		.irq = IRQ_GPIOB(30),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+#endif
+
+#if defined(CONFIG_USB_ULPI)
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx27_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
+
+static void __init eukrea_cpuimx27_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+	imx27_add_imx_uart0(&uart_pdata);
+
+	imx27_add_mxc_nand(&cpuimx27_nand_board_info);
+
+	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+	imx27_add_i2c_imx1(&cpuimx27_i2c1_data);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+	/* SDHC2 can be used for Wifi */
+	mxc_register_device(&mxc_sdhc_device1, NULL);
+#endif
+#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
+	/* in which case UART4 is also used for Bluetooth */
+	imx27_add_imx_uart3(&uart_pdata);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	platform_device_register(&serial_device);
+#endif
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+	eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+	.init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = eukrea_cpuimx27_init,
+	.timer          = &eukrea_cpuimx27_timer,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
new file mode 100644
index 000000000000..22a2b5d91213
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx27.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+static unsigned int mx27lite_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static void __init mx27lite_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
+		"imx27lite");
+	imx27_add_imx_uart0(&uart_pdata);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27lite_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27lite_timer = {
+	.init	= mx27lite_timer_init,
+};
+
+MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = mx27lite_init,
+	.timer          = &mx27lite_timer,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
new file mode 100644
index 000000000000..77a760cfadc0
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -0,0 +1,165 @@
+/*
+ * arch/arm/mach-imx/mach-mx1ads.c
+ *
+ * Initially based on:
+ *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
+ *	Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
+ *
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux-mx1.h>
+#include <mach/irqs.h>
+
+#include "devices-imx1.h"
+#include "devices.h"
+
+static int mx1ads_pins[] = {
+	/* UART1 */
+	PC9_PF_UART1_CTS,
+	PC10_PF_UART1_RTS,
+	PC11_PF_UART1_TXD,
+	PC12_PF_UART1_RXD,
+	/* UART2 */
+	PB28_PF_UART2_CTS,
+	PB29_PF_UART2_RTS,
+	PB30_PF_UART2_TXD,
+	PB31_PF_UART2_RXD,
+	/* I2C */
+	PA15_PF_I2C_SDA,
+	PA16_PF_I2C_SCL,
+	/* SPI */
+	PC13_PF_SPI1_SPI_RDY,
+	PC14_PF_SPI1_SCLK,
+	PC15_PF_SPI1_SS,
+	PC16_PF_SPI1_MISO,
+	PC17_PF_SPI1_MOSI,
+};
+
+/*
+ * UARTs platform data
+ */
+
+static const struct imxuart_platform_data uart0_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+       
+static const struct imxuart_platform_data uart1_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/*
+ * Physmap flash
+ */
+
+static struct physmap_flash_data mx1ads_flash_data = {
+	.width		= 4,		/* bankwidth in bytes */
+};
+
+static struct resource flash_resource = {
+	.start	= MX1_CS0_PHYS,
+	.end	= MX1_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * I2C
+ */
+static struct pcf857x_platform_data pcf857x_data[] = {
+	{
+		.gpio_base = 4 * 32,
+	}, {
+		.gpio_base = 4 * 32 + 16,
+	}
+};
+
+static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info mx1ads_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8575", 0x22),
+		.platform_data = &pcf857x_data[0],
+	}, {
+		I2C_BOARD_INFO("pcf8575", 0x24),
+		.platform_data = &pcf857x_data[1],
+	},
+};
+
+/*
+ * Board init
+ */
+static void __init mx1ads_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx1ads_pins,
+		ARRAY_SIZE(mx1ads_pins), "mx1ads");
+
+	/* UART */
+	imx1_add_imx_uart0(&uart0_pdata);
+	imx1_add_imx_uart1(&uart1_pdata);
+
+	/* Physmap flash */
+	mxc_register_device(&flash_device, &mx1ads_flash_data);
+
+	/* I2C */
+	i2c_register_board_info(0, mx1ads_i2c_devices,
+				ARRAY_SIZE(mx1ads_i2c_devices));
+
+	imx1_add_i2c_imx(&mx1ads_i2c_data);
+}
+
+static void __init mx1ads_timer_init(void)
+{
+	mx1_clocks_init(32000);
+}
+
+struct sys_timer mx1ads_timer = {
+	.init	= mx1ads_timer_init,
+};
+
+MACHINE_START(MX1ADS, "Freescale MX1ADS")
+	/* Maintainer: Sascha Hauer, Pengutronix */
+	.phys_io	= MX1_IO_BASE_ADDR,
+	.io_pg_offst	= (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params	= MX1_PHYS_OFFSET + 0x100,
+	.map_io		= mx1_map_io,
+	.init_irq	= mx1_init_irq,
+	.timer		= &mx1ads_timer,
+	.init_machine	= mx1ads_init,
+MACHINE_END
+
+MACHINE_START(MXLADS, "Freescale MXLADS")
+	.phys_io	= MX1_IO_BASE_ADDR,
+	.io_pg_offst	= (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params	= MX1_PHYS_OFFSET + 0x100,
+	.map_io		= mx1_map_io,
+	.init_irq	= mx1_init_irq,
+	.timer		= &mx1ads_timer,
+	.init_machine	= mx1ads_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
new file mode 100644
index 000000000000..96d7f8189f32
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -0,0 +1,324 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/imxfb.h>
+#include <mach/iomux-mx21.h>
+#include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+
+#include "devices-imx21.h"
+#include "devices.h"
+
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR   0xf5000000
+#define MX21ADS_MMIO_SIZE        SZ_16M
+
+#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
+		(MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP        0x0001 /* read */
+#define MX21ADS_IO_TP6          0x0001 /* write */
+#define MX21ADS_IO_SW_SEL       0x0002 /* read */
+#define MX21ADS_IO_TP7          0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE   0x0008
+#define MX21ADS_IO_CSI_CTL2     0x0010
+#define MX21ADS_IO_CSI_CTL1     0x0020
+#define MX21ADS_IO_CSI_CTL0     0x0040
+#define MX21ADS_IO_UART1_EN     0x0080
+#define MX21ADS_IO_UART4_EN     0x0100
+#define MX21ADS_IO_LCDON        0x0200
+#define MX21ADS_IO_IRDA_EN      0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B   0x1000
+#define MX21ADS_IO_IRDA_MD1     0x2000
+#define MX21ADS_IO_LED4_ON      0x4000
+#define MX21ADS_IO_LED3_ON      0x8000
+
+static unsigned int mx21ads_pins[] = {
+
+	/* CS8900A */
+	(GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
+
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+
+	/* UART3 (IrDA) - only TXD and RXD */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+
+	/* LCDC */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA24_PF_REV,     /* Sharp panel dedicated signal */
+	PA25_PF_CLS,     /* Sharp panel dedicated signal */
+	PA26_PF_PS,      /* Sharp panel dedicated signal */
+	PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+
+	/* MMC/SDHC */
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+
+	/* NFC */
+	PF0_PF_NRFB,
+	PF1_PF_NFCE,
+	PF2_PF_NFWP,
+	PF3_PF_NFCLE,
+	PF4_PF_NFALE,
+	PF5_PF_NFRE,
+	PF6_PF_NFWE,
+	PF7_PF_NFIO0,
+	PF8_PF_NFIO1,
+	PF9_PF_NFIO2,
+	PF10_PF_NFIO3,
+	PF11_PF_NFIO4,
+	PF12_PF_NFIO5,
+	PF13_PF_NFIO6,
+	PF14_PF_NFIO7,
+};
+
+/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
+static struct physmap_flash_data mx21ads_flash_data = {
+	.width = 4,
+};
+
+static struct resource mx21ads_flash_resource = {
+	.start = MX21_CS0_BASE_ADDR,
+	.end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mx21ads_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &mx21ads_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &mx21ads_flash_resource,
+};
+
+static const struct imxuart_platform_data uart_pdata_rts __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct imxuart_platform_data uart_pdata_norts __initconst = {
+};
+
+static int mx21ads_fb_init(struct platform_device *pdev)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(MX21ADS_IO_REG);
+	tmp |= MX21ADS_IO_LCDON;
+	__raw_writew(tmp, MX21ADS_IO_REG);
+	return 0;
+}
+
+static void mx21ads_fb_exit(struct platform_device *pdev)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(MX21ADS_IO_REG);
+	tmp &= ~MX21ADS_IO_LCDON;
+	__raw_writew(tmp, MX21ADS_IO_REG);
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DB02
+ */
+static struct imx_fb_videomode mx21ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 2,
+			.left_margin	= 6,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 8,
+			.lower_margin	= 10,
+		},
+		.pcr		= 0xfb108bc7,
+		.bpp		= 16,
+	},
+};
+
+static struct imx_fb_platform_data mx21ads_fb_data = {
+	.mode = mx21ads_modes,
+	.num_modes = ARRAY_SIZE(mx21ads_modes),
+
+	.pwmr		= 0x00a903ff,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020008,
+
+	.init = mx21ads_fb_init,
+	.exit = mx21ads_fb_exit,
+};
+
+static int mx21ads_sdhc_get_ro(struct device *dev)
+{
+	return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+}
+
+static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
+	void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOD(25), detect_irq,
+		IRQF_TRIGGER_FALLING, "mmc-detect", data);
+	if (ret)
+		goto out;
+	return 0;
+out:
+	return ret;
+}
+
+static void mx21ads_sdhc_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOD(25), data);
+}
+
+static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
+	.get_ro = mx21ads_sdhc_get_ro,
+	.init = mx21ads_sdhc_init,
+	.exit = mx21ads_sdhc_exit,
+};
+
+static const struct mxc_nand_platform_data
+mx21ads_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct map_desc mx21ads_io_desc[] __initdata = {
+	/*
+	 * Memory-mapped I/O on MX21ADS Base board:
+	 *   - CS8900A Ethernet controller
+	 *   - ST16C2552CJ UART
+	 *   - CPU and Base board version
+	 *   - Base board I/O register
+	 */
+	{
+		.virtual = MX21ADS_MMIO_BASE_ADDR,
+		.pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
+		.length = MX21ADS_MMIO_SIZE,
+		.type = MT_DEVICE,
+	},
+};
+
+static void __init mx21ads_map_io(void)
+{
+	mx21_map_io();
+	iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mx21ads_nor_mtd_device,
+};
+
+static void __init mx21ads_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
+			"mx21ads");
+
+	imx21_add_imx_uart0(&uart_pdata_rts);
+	imx21_add_imx_uart2(&uart_pdata_norts);
+	imx21_add_imx_uart3(&uart_pdata_rts);
+	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+	imx21_add_mxc_nand(&mx21ads_nand_board_info);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx21ads_timer_init(void)
+{
+	mx21_clocks_init(32768, 26000000);
+}
+
+static struct sys_timer mx21ads_timer = {
+	.init	= mx21ads_timer_init,
+};
+
+MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = MX21_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX21_PHYS_OFFSET + 0x100,
+	.map_io         = mx21ads_map_io,
+	.init_irq       = mx21_init_irq,
+	.init_machine   = mx21ads_board_init,
+	.timer          = &mx21ads_timer,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
new file mode 100644
index 000000000000..e2a82bab012b
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This machine is known as:
+ *  - i.MX27 3-Stack Development System
+ *  - i.MX27 Platform Development Kit (i.MX27 PDK)
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx27.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+static unsigned int mx27pdk_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static void __init mx27pdk_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
+		"mx27pdk");
+	imx27_add_imx_uart0(&uart_pdata);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27pdk_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27pdk_timer = {
+	.init	= mx27pdk_timer_init,
+};
+
+MACHINE_START(MX27_3DS, "Freescale MX27PDK")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = mx27pdk_init,
+	.timer          = &mx27pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
new file mode 100644
index 000000000000..9c77da98a10e
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -0,0 +1,357 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mx27.h>
+#include <mach/mxc_nand.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS        0xf4300000
+#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
+		(PBC_BASE_ADDRESS + (offset))
+
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH             0
+
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
+
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET      (1 << 3)
+
+static unsigned int mx27ads_pins[] = {
+	/* UART0 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART1 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART2 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART3 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* UART4 */
+	PB18_AF_UART5_TXD,
+	PB19_AF_UART5_RXD,
+	PB20_AF_UART5_CTS,
+	PB21_AF_UART5_RTS,
+	/* UART5 */
+	PB10_AF_UART6_TXD,
+	PB12_AF_UART6_CTS,
+	PB11_AF_UART6_RXD,
+	PB13_AF_UART6_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* FB */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA24_PF_REV,
+	PA25_PF_CLS,
+	PA26_PF_PS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* OWIRE */
+	PE16_AF_OWIRE,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* SDHC2*/
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static const struct mxc_nand_platform_data
+mx27ads_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+/* ADS's NOR flash */
+static struct physmap_flash_data mx27ads_flash_data = {
+	.width = 2,
+};
+
+static struct resource mx27ads_flash_resource = {
+	.start = 0xc0000000,
+	.end = 0xc0000000 + 0x02000000 - 1,
+	.flags = IORESOURCE_MEM,
+
+};
+
+static struct platform_device mx27ads_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &mx27ads_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &mx27ads_flash_resource,
+};
+
+static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info mx27ads_i2c_devices[] = {
+};
+
+void lcd_power(int on)
+{
+	if (on)
+		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+	else
+		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
+}
+
+static struct imx_fb_videomode mx27ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 1,
+			.left_margin	= 9,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFB008BC0,
+	},
+};
+
+static struct imx_fb_platform_data mx27ads_fb_data = {
+	.mode = mx27ads_modes,
+	.num_modes = ARRAY_SIZE(mx27ads_modes),
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+
+	.lcd_power	= lcd_power,
+};
+
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+			      void *data)
+{
+	return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+			   "sdhc1-card-detect", data);
+}
+
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+			      void *data)
+{
+	return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+			   "sdhc2-card-detect", data);
+}
+
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOE(21), data);
+}
+
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOB(7), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mx27ads_sdhc1_init,
+	.exit = mx27ads_sdhc1_exit,
+};
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.init = mx27ads_sdhc2_init,
+	.exit = mx27ads_sdhc2_exit,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mx27ads_nor_mtd_device,
+	&mxc_fec_device,
+	&mxc_w1_master_device,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static void __init mx27ads_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+			"mx27ads");
+
+	imx27_add_imx_uart0(&uart_pdata);
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
+	imx27_add_imx_uart3(&uart_pdata);
+	imx27_add_imx_uart4(&uart_pdata);
+	imx27_add_imx_uart5(&uart_pdata);
+	imx27_add_mxc_nand(&mx27ads_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, mx27ads_i2c_devices,
+				ARRAY_SIZE(mx27ads_i2c_devices));
+	imx27_add_i2c_imx1(&mx27ads_i2c1_data);
+	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27ads_timer_init(void)
+{
+	unsigned long fref = 26000000;
+
+	if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
+		fref = 27000000;
+
+	mx27_clocks_init(fref);
+}
+
+static struct sys_timer mx27ads_timer = {
+	.init	= mx27ads_timer_init,
+};
+
+static struct map_desc mx27ads_io_desc[] __initdata = {
+	{
+		.virtual = PBC_BASE_ADDRESS,
+		.pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
+		.length = SZ_1M,
+		.type = MT_DEVICE,
+	},
+};
+
+static void __init mx27ads_map_io(void)
+{
+	mx27_map_io();
+	iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
+}
+
+MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27ads_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = mx27ads_board_init,
+	.timer          = &mx27ads_timer,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
new file mode 100644
index 000000000000..a3a1e452d4c5
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -0,0 +1,285 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <linux/gpio.h>
+#include <mach/iomux-mx27.h>
+#include <mach/mxc_nand.h>
+#include <linux/i2c/pca953x.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+static unsigned int mxt_td60_pins[] __initdata = {
+	/* UART0 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART1 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART2 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* FB */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA25_PF_CLS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* OWIRE */
+	PE16_AF_OWIRE,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	PF8_AF_ATA_IORDY,
+	/* SDHC2*/
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static const struct mxc_nand_platform_data
+mxt_td60_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = {
+	.bitrate = 100000,
+};
+
+/* PCA9557 */
+static int mxt_td60_pca9557_setup(struct i2c_client *client,
+				unsigned gpio_base, unsigned ngpio,
+				void *context)
+{
+	static int mxt_td60_gpio_value[] = {
+		-1, -1, -1, -1, -1, -1, -1, 1
+	};
+	int n;
+
+	for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
+		gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
+		if (mxt_td60_gpio_value[n] < 0)
+			gpio_direction_input(gpio_base + n);
+		else
+			gpio_direction_output(gpio_base + n,
+						mxt_td60_gpio_value[n]);
+		gpio_export(gpio_base + n, 0);
+	}
+
+	return 0;
+}
+
+static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
+	.gpio_base	= 240, /* place PCA9557 after all MX27 gpio pins */
+	.invert		= 0, /* Do not invert */
+	.setup		= mxt_td60_pca9557_setup,
+};
+
+static struct i2c_board_info mxt_td60_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pca9557", 0x18),
+		.platform_data = &mxt_td60_pca9557_pdata,
+	},
+};
+
+static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info mxt_td60_i2c2_devices[] = {
+};
+
+static struct imx_fb_videomode mxt_td60_modes[] = {
+	{
+		.mode = {
+			.name		= "Chimei LW700AT9003",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 480,
+			.pixclock	= 30303,
+			.hsync_len	= 64,
+			.left_margin	= 0x67,
+			.right_margin	= 0x68,
+			.vsync_len	= 16,
+			.upper_margin	= 0x0f,
+			.lower_margin	= 0x0f,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFA208B83,
+	},
+};
+
+static struct imx_fb_platform_data mxt_td60_fb_data = {
+	.mode = mxt_td60_modes,
+	.num_modes = ARRAY_SIZE(mxt_td60_modes),
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
+static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+				void *data)
+{
+	return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
+				"sdhc1-card-detect", data);
+}
+
+static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOF(8), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mxt_td60_sdhc1_init,
+	.exit = mxt_td60_sdhc1_exit,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static void __init mxt_td60_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
+			"MXT_TD60");
+
+	imx27_add_imx_uart0(&uart_pdata);
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
+	imx27_add_mxc_nand(&mxt_td60_nand_board_info);
+
+	i2c_register_board_info(0, mxt_td60_i2c_devices,
+				ARRAY_SIZE(mxt_td60_i2c_devices));
+
+	i2c_register_board_info(1, mxt_td60_i2c2_devices,
+				ARRAY_SIZE(mxt_td60_i2c2_devices));
+
+	imx27_add_i2c_imx0(&mxt_td60_i2c0_data);
+	imx27_add_i2c_imx1(&mxt_td60_i2c1_data);
+	mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mxt_td60_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mxt_td60_timer = {
+	.init	= mxt_td60_timer_init,
+};
+
+MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
+	/* maintainer: Maxtrack Industrial */
+	.phys_io	= MX27_AIPI_BASE_ADDR,
+	.io_pg_offst	= ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= MX27_PHYS_OFFSET + 0x100,
+	.map_io		= mx27_map_io,
+	.init_irq	= mx27_init_irq,
+	.init_machine	= mxt_td60_board_init,
+	.timer		= &mxt_td60_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
new file mode 100644
index 000000000000..6c92deaf468f
--- /dev/null
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -0,0 +1,460 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx27.h>
+#include <asm/mach/time.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
+#include <mach/mxc_nand.h>
+#include <mach/irqs.h>
+#include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+#include <mach/imxfb.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
+#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
+#define SPI1_SS0 (GPIO_PORTD + 28)
+#define SPI1_SS1 (GPIO_PORTD + 27)
+#define SD2_CD (GPIO_PORTC + 29)
+
+static int pca100_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* SDHC */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+	SD2_CD | GPIO_GPIO | GPIO_IN,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* onboard I2C */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* external I2C */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+	/* OTG */
+	OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+	PC7_PF_USBOTG_DATA5,
+	PC8_PF_USBOTG_DATA6,
+	PC9_PF_USBOTG_DATA0,
+	PC10_PF_USBOTG_DATA2,
+	PC11_PF_USBOTG_DATA1,
+	PC12_PF_USBOTG_DATA4,
+	PC13_PF_USBOTG_DATA3,
+	PE0_PF_USBOTG_NXT,
+	PE1_PF_USBOTG_STP,
+	PE2_PF_USBOTG_DIR,
+	PE24_PF_USBOTG_CLK,
+	PE25_PF_USBOTG_DATA7,
+	/* USBH2 */
+	USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA26_PF_PS,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA31_PF_OE_ACD,
+	/* free GPIO */
+	GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */
+	GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */
+	GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct mxc_nand_platform_data
+pca100_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_w1_master_device,
+	&mxc_fec_device,
+	&mxc_wdt,
+};
+
+static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pca100_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4a),
+		.type = "lm75"
+	}
+};
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_eeprom at25320 = {
+	.name		= "at25320an",
+	.byte_len	= 4096,
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
+	{
+		.modalias = "at25",
+		.max_speed_hz = 30000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &at25320,
+	},
+};
+
+static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1};
+
+static const struct spi_imx_master pca100_spi0_data __initconst = {
+	.chipselect	= pca100_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+};
+#endif
+
+static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
+	gpio_set_value(GPIO_PORTC + 20, 1);
+	udelay(2);
+	gpio_set_value(GPIO_PORTC + 20, 0);
+	mxc_gpio_mode(PC20_PF_SSI1_FS);
+	msleep(2);
+}
+
+static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);  /* FS */
+	gpio_set_value(GPIO_PORTC + 20, 0);
+	mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT);  /* TX */
+	gpio_set_value(GPIO_PORTC + 22, 0);
+	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT);  /* reset */
+	gpio_set_value(GPIO_PORTC + 28, 0);
+	udelay(10);
+	gpio_set_value(GPIO_PORTC + 28, 1);
+	mxc_gpio_mode(PC20_PF_SSI1_FS);
+	mxc_gpio_mode(PC22_PF_SSI1_TXD);
+	msleep(2);
+}
+
+static struct imx_ssi_platform_data pca100_ssi_pdata = {
+	.ac97_reset		= pca100_ac97_cold_reset,
+	.ac97_warm_reset	= pca100_ac97_warm_reset,
+	.flags			= IMX_SSI_USE_AC97,
+};
+
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOC(29), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "imx-mmc-detect", data);
+	if (ret)
+		printk(KERN_ERR
+			"pca100: Failed to reuest irq for sd/mmc detection\n");
+
+	return ret;
+}
+
+static void pca100_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOC(29), data);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.init = pca100_sdhc2_init,
+	.exit = pca100_sdhc2_exit,
+};
+
+#if defined(CONFIG_USB_ULPI)
+static int otg_phy_init(struct platform_device *pdev)
+{
+	gpio_set_value(OTG_PHY_CS_GPIO, 0);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data otg_pdata = {
+	.init	= otg_phy_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static int usbh2_phy_init(struct platform_device *pdev)
+{
+	gpio_set_value(USBH2_PHY_CS_GPIO, 0);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= usbh2_phy_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pca100_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", pca100_otg_mode);
+
+/* framebuffer info */
+static struct imx_fb_videomode pca100_fb_modes[] = {
+	{
+		.mode = {
+			.name		= "EMERGING-ETV570G0DHU",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 39722, /* in ps (25.175 MHz) */
+			.hsync_len	= 30,
+			.left_margin	= 114,
+			.right_margin	= 16,
+			.vsync_len	= 3,
+			.upper_margin	= 32,
+			.lower_margin	= 0,
+		},
+		/*
+		 * TFT
+		 * Pixel pol active high
+		 * HSYNC active low
+		 * VSYNC active low
+		 * use HSYNC for ACD count
+		 * line clock disable while idle
+		 * always enable line clock even if no data
+		 */
+		.pcr = 0xf0c08080,
+		.bpp = 16,
+	},
+};
+
+static struct imx_fb_platform_data pca100_fb_data = {
+	.mode = pca100_fb_modes,
+	.num_modes = ARRAY_SIZE(pca100_fb_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
+static void __init pca100_init(void)
+{
+	int ret;
+
+	/* SSI unit */
+	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+				  MXC_AUDMUX_V1_PCR_TFCSEL(3) |
+				  MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
+				  MXC_AUDMUX_V1_PCR_RXDSEL(3));
+	mxc_audmux_v1_configure_port(3,
+				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+				  MXC_AUDMUX_V1_PCR_TFCSEL(0) |
+				  MXC_AUDMUX_V1_PCR_TFSDIR |
+				  MXC_AUDMUX_V1_PCR_RXDSEL(0));
+
+	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
+			ARRAY_SIZE(pca100_pins), "PCA100");
+	if (ret)
+		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+
+	mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
+
+	imx27_add_imx_uart0(&uart_pdata);
+
+	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+
+	imx27_add_mxc_nand(&pca100_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, pca100_i2c_devices,
+				ARRAY_SIZE(pca100_i2c_devices));
+
+	imx27_add_i2c_imx1(&pca100_i2c1_data);
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
+	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
+	spi_register_board_info(pca100_spi_board_info,
+				ARRAY_SIZE(pca100_spi_board_info));
+	imx27_add_spi_imx0(&pca100_spi_0_data);
+#endif
+
+	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
+	gpio_direction_output(OTG_PHY_CS_GPIO, 1);
+	gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
+	gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host) {
+		gpio_set_value(OTG_PHY_CS_GPIO, 0);
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+	}
+
+	mxc_register_device(&mxc_fb_device, &pca100_fb_data);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init pca100_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pca100_timer = {
+	.init = pca100_timer_init,
+};
+
+MACHINE_START(PCA100, "phyCARD-i.MX27")
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = pca100_init,
+	.timer          = &pca100_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
new file mode 100644
index 000000000000..9212e8f37001
--- /dev/null
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -0,0 +1,352 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-pcm038.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx27.h>
+#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+static int pcm038_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* SSI4 */
+	PC16_PF_SSI4_FS,
+	PC17_PF_SSI4_RXD,
+	PC18_PF_SSI4_TXD,
+	PC19_PF_SSI4_CLK,
+	/* USB host */
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
+};
+
+/*
+ * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
+ * 16 bit width
+ */
+
+static struct platdata_mtd_ram pcm038_sram_data = {
+	.bankwidth = 2,
+};
+
+static struct resource pcm038_sram_resource = {
+	.start = MX27_CS1_BASE_ADDR,
+	.end   = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm038_sram_mtd_device = {
+	.name = "mtd-ram",
+	.id = 0,
+	.dev = {
+		.platform_data = &pcm038_sram_data,
+	},
+	.num_resources = 1,
+	.resource = &pcm038_sram_resource,
+};
+
+/*
+ * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
+ * 16 bit width
+ */
+static struct physmap_flash_data pcm038_flash_data = {
+	.width = 2,
+};
+
+static struct resource pcm038_flash_resource = {
+	.start = 0xc0000000,
+	.end   = 0xc1ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm038_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &pcm038_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &pcm038_flash_resource,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct mxc_nand_platform_data
+pcm038_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&pcm038_nor_mtd_device,
+	&mxc_w1_master_device,
+	&mxc_fec_device,
+	&pcm038_sram_mtd_device,
+	&mxc_wdt,
+};
+
+/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
+ * setup other stuffs to access the sram. */
+static void __init pcm038_init_sram(void)
+{
+	mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
+}
+
+static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm038_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4a),
+	}
+};
+
+static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
+
+static const struct spi_imx_master pcm038_spi0_data __initconst = {
+	.chipselect = pcm038_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
+};
+
+static struct regulator_consumer_supply sdhc1_consumers[] = {
+	{
+		.dev	= &mxc_sdhc_device1.dev,
+		.supply	= "sdhc_vcc",
+	},
+};
+
+static struct regulator_init_data sdhc1_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3400000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 0,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
+	.consumer_supplies = sdhc1_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+	{
+		.dev	= NULL,
+		.supply	= "imx_cam_vcc",
+	},
+};
+
+static struct regulator_init_data cam_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3400000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 0,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+	.consumer_supplies = cam_consumers,
+};
+
+struct mc13783_regulator_init_data pcm038_regulators[] = {
+	{
+		.id = MC13783_REGU_VCAM,
+		.init_data = &cam_data,
+	}, {
+		.id = MC13783_REGU_VMMC1,
+		.init_data = &sdhc1_data,
+	},
+};
+
+static struct mc13783_platform_data pcm038_pmic = {
+	.regulators = pcm038_regulators,
+	.num_regulators = ARRAY_SIZE(pcm038_regulators),
+	.flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
+		 MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info pcm038_spi_board_info[] __initdata = {
+	{
+		.modalias = "mc13783",
+		.irq = IRQ_GPIOB(23),
+		.max_speed_hz = 300000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = &pcm038_pmic,
+		.mode = SPI_CS_HIGH,
+	}
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static void __init pcm038_init(void)
+{
+	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
+			"PCM038");
+
+	pcm038_init_sram();
+
+	imx27_add_imx_uart0(&uart_pdata);
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
+
+	mxc_gpio_mode(PE16_AF_OWIRE);
+	imx27_add_mxc_nand(&pcm038_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, pcm038_i2c_devices,
+				ARRAY_SIZE(pcm038_i2c_devices));
+
+	imx27_add_i2c_imx1(&pcm038_i2c1_data);
+
+	/* PE18 for user-LED D40 */
+	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+
+	/* MC13783 IRQ */
+	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
+
+	imx27_add_spi_imx0(&pcm038_spi0_data);
+	spi_register_board_info(pcm038_spi_board_info,
+				ARRAY_SIZE(pcm038_spi_board_info));
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#ifdef CONFIG_MACH_PCM970_BASEBOARD
+	pcm970_baseboard_init();
+#endif
+}
+
+static void __init pcm038_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pcm038_timer = {
+	.init = pcm038_timer_init,
+};
+
+MACHINE_START(PCM038, "phyCORE-i.MX27")
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = pcm038_init,
+	.timer          = &pcm038_timer,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
new file mode 100644
index 000000000000..88bf0d1e26e6
--- /dev/null
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -0,0 +1,157 @@
+/*
+ * linux/arch/arm/mach-mx1/mach-scb9328.c
+ *
+ * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/interrupt.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/iomux-mx1.h>
+
+#include "devices-imx1.h"
+#include "devices.h"
+
+/*
+ * This scb9328 has a 32MiB flash
+ */
+static struct resource flash_resource = {
+	.start	= MX1_CS0_PHYS,
+	.end	= MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data scb_flash_data = {
+	.width  = 2,
+};
+
+static struct platform_device scb_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+		.platform_data = &scb_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * scb9328 has a DM9000 network controller
+ * connected to CS5, with 16 bit data path
+ * and interrupt connected to GPIO 3
+ */
+
+/*
+ * internal datapath is fixed 16 bit
+ */
+static struct dm9000_plat_data dm9000_platdata = {
+	.flags	= DM9000_PLATF_16BITONLY,
+};
+
+/*
+ * the DM9000 drivers wants two defined address spaces
+ * to gain access to address latch registers and the data path.
+ */
+static struct resource dm9000x_resources[] = {
+	{
+		.name	= "address area",
+		.start	= MX1_CS5_PHYS,
+		.end	= MX1_CS5_PHYS + 1,
+		.flags	= IORESOURCE_MEM,	/* address access */
+	}, {
+		.name	= "data area",
+		.start	= MX1_CS5_PHYS + 4,
+		.end	= MX1_CS5_PHYS + 5,
+		.flags	= IORESOURCE_MEM,	/* data access */
+	}, {
+		.start	= IRQ_GPIOC(3),
+		.end	= IRQ_GPIOC(3),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device dm9000x_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm9000x_resources),
+	.resource	= dm9000x_resources,
+	.dev		= {
+		.platform_data = &dm9000_platdata,
+	}
+};
+
+static int mxc_uart1_pins[] = {
+	PC9_PF_UART1_CTS,
+	PC10_PF_UART1_RTS,
+	PC11_PF_UART1_TXD,
+	PC12_PF_UART1_RXD,
+};
+
+static int uart1_mxc_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins), "UART1");
+}
+
+static void uart1_mxc_exit(struct platform_device *pdev)
+{
+	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins));
+}
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.init = uart1_mxc_init,
+	.exit = uart1_mxc_exit,
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&scb_flash_device,
+	&dm9000x_device,
+};
+
+/*
+ * scb9328_init - Init the CPU card itself
+ */
+static void __init scb9328_init(void)
+{
+	imx1_add_imx_uart0(&uart_pdata);
+
+	printk(KERN_INFO"Scb9328: Adding devices\n");
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init scb9328_timer_init(void)
+{
+	mx1_clocks_init(32000);
+}
+
+static struct sys_timer scb9328_timer = {
+	.init	= scb9328_timer_init,
+};
+
+MACHINE_START(SCB9328, "Synertronixx scb9328")
+    /* Sascha Hauer */
+	.phys_io	= 0x00200000,
+	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
+	.boot_params	= 0x08000100,
+	.map_io		= mx1_map_io,
+	.init_irq	= mx1_init_irq,
+	.timer		= &scb9328_timer,
+	.init_machine	= scb9328_init,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
new file mode 100644
index 000000000000..117ebf6bc951
--- /dev/null
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -0,0 +1,50 @@
+/*
+ *  author: Sascha Hauer
+ *  Created: april 20th, 2004
+ *  Copyright: Synertronixx GmbH
+ *
+ *  Common code for i.MX1 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static struct map_desc imx_io_desc[] __initdata = {
+	{
+		.virtual = MX1_IO_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX1_IO_BASE_ADDR),
+		.length = MX1_IO_SIZE,
+		.type = MT_DEVICE
+	}
+};
+
+void __init mx1_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX1);
+	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
+
+	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
+}
+
+int imx1_register_gpios(void);
+
+void __init mx1_init_irq(void)
+{
+	imx1_register_gpios();
+	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
new file mode 100644
index 000000000000..68aa5d2ecdb1
--- /dev/null
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-imx/mm-imx21.c
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/* MX21 memory map definition */
+static struct map_desc imx21_io_desc[] __initdata = {
+	/*
+	 * this fixed mapping covers:
+	 * - AIPI1
+	 * - AIPI2
+	 * - AITC
+	 * - ROM Patch
+	 * - and some reserved space
+	 */
+	{
+		.virtual = MX21_AIPI_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR),
+		.length = MX21_AIPI_SIZE,
+		.type = MT_DEVICE
+	},
+	/*
+	 * this fixed mapping covers:
+	 * - CSI
+	 * - ATA
+	 */
+	{
+		.virtual = MX21_SAHB1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR),
+		.length = MX21_SAHB1_SIZE,
+		.type = MT_DEVICE
+	},
+	/*
+	 * this fixed mapping covers:
+	 * - EMI
+	 */
+	{
+		.virtual = MX21_X_MEMC_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR),
+		.length = MX21_X_MEMC_SIZE,
+		.type = MT_DEVICE
+	},
+};
+
+/*
+ * Initialize the memory map. It is called during the
+ * system startup to create static physical to virtual
+ * memory map for the IO modules.
+ */
+void __init mx21_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX21);
+	mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
+
+	iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
+}
+
+int imx21_register_gpios(void);
+
+void __init mx21_init_irq(void)
+{
+	imx21_register_gpios();
+	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
new file mode 100644
index 000000000000..bcedce9c87dd
--- /dev/null
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-imx/mm-imx27.c
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/* MX27 memory map definition */
+static struct map_desc imx27_io_desc[] __initdata = {
+	/*
+	 * this fixed mapping covers:
+	 * - AIPI1
+	 * - AIPI2
+	 * - AITC
+	 * - ROM Patch
+	 * - and some reserved space
+	 */
+	{
+		.virtual = MX27_AIPI_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR),
+		.length = MX27_AIPI_SIZE,
+		.type = MT_DEVICE
+	},
+	/*
+	 * this fixed mapping covers:
+	 * - CSI
+	 * - ATA
+	 */
+	{
+		.virtual = MX27_SAHB1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR),
+		.length = MX27_SAHB1_SIZE,
+		.type = MT_DEVICE
+	},
+	/*
+	 * this fixed mapping covers:
+	 * - EMI
+	 */
+	{
+		.virtual = MX27_X_MEMC_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR),
+		.length = MX27_X_MEMC_SIZE,
+		.type = MT_DEVICE
+	},
+};
+
+/*
+ * Initialize the memory map. It is called during the
+ * system startup to create static physical to virtual
+ * memory map for the IO modules.
+ */
+void __init mx27_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX27);
+	mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
+
+	iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
+}
+
+int imx27_register_gpios(void);
+
+void __init mx27_init_irq(void)
+{
+	imx27_register_gpios();
+	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
new file mode 100644
index 000000000000..b09ee12a4ff0
--- /dev/null
+++ b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
@@ -0,0 +1,18 @@
+/*
+ * Exported ksyms of ARCH_MX1
+ *
+ * Copyright (C) 2008, Darius Augulis <augulis.darius@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+
+#include <mach/mx1_camera.h>
+
+/* IMX camera FIQ handler */
+EXPORT_SYMBOL(mx1_camera_sof_fiq_start);
+EXPORT_SYMBOL(mx1_camera_sof_fiq_end);
diff --git a/arch/arm/mach-imx/mx1-camera-fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S
new file mode 100644
index 000000000000..9c69aa65bf17
--- /dev/null
+++ b/arch/arm/mach-imx/mx1-camera-fiq.S
@@ -0,0 +1,35 @@
+/*
+ *  Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ *  Based on linux/arch/arm/lib/floppydma.S
+ *      Copyright (C) 1995, 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+		.text
+		.global	mx1_camera_sof_fiq_end
+		.global	mx1_camera_sof_fiq_start
+mx1_camera_sof_fiq_start:
+		@ enable dma
+		ldr	r12, [r9]
+		orr	r12, r12, #0x00000001
+		str	r12, [r9]
+		@ unmask DMA interrupt
+		ldr	r12, [r8]
+		bic	r12, r12, r13
+		str	r12, [r8]
+		@ disable SOF interrupt
+		ldr	r12, [r10]
+		bic	r12, r12, #0x00010000
+		str	r12, [r10]
+		@ clear SOF flag
+		mov	r12, #0x00010000
+		str	r12, [r11]
+		@ return from FIQ
+		subs	pc, lr, #4
+mx1_camera_sof_fiq_end:
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
new file mode 100644
index 000000000000..f490a406d57e
--- /dev/null
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/can/platform/sja1000.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx27.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static int pcm970_pins[] = {
+	/* SDHC */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA24_PF_REV,
+	PA25_PF_CLS,
+	PA26_PF_PS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/*
+	 * it seems the data line misses a pullup, so we must enable
+	 * the internal pullup as a local workaround
+	 */
+	PD17_PF_I2C_DATA | GPIO_PUEN,
+	PD18_PF_I2C_CLK,
+	/* Camera */
+	PB10_PF_CSI_D0,
+	PB11_PF_CSI_D1,
+	PB12_PF_CSI_D2,
+	PB13_PF_CSI_D3,
+	PB14_PF_CSI_D4,
+	PB15_PF_CSI_MCLK,
+	PB16_PF_CSI_PIXCLK,
+	PB17_PF_CSI_D5,
+	PB18_PF_CSI_D6,
+	PB19_PF_CSI_D7,
+	PB20_PF_CSI_VSYNC,
+	PB21_PF_CSI_HSYNC,
+};
+
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_PORTC + 28);
+}
+
+static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
+				"imx-mmc-detect", data);
+	if (ret)
+		return ret;
+
+	ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
+	if (ret) {
+		free_irq(IRQ_GPIOC(29), data);
+		return ret;
+	}
+
+	gpio_direction_input(GPIO_PORTC + 28);
+
+	return 0;
+}
+
+static void pcm970_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOC(29), data);
+	gpio_free(GPIO_PORTC + 28);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.get_ro = pcm970_sdhc2_get_ro,
+	.init = pcm970_sdhc2_init,
+	.exit = pcm970_sdhc2_exit,
+};
+
+static struct imx_fb_videomode pcm970_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 7,
+			.left_margin	= 5,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		/*
+		 * - HSYNC active high
+		 * - VSYNC active high
+		 * - clk notenabled while idle
+		 * - clock not inverted
+		 * - data not inverted
+		 * - data enable low active
+		 * - enable sharp mode
+		 */
+		.pcr		= 0xF00080C0,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "TX090",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 38255,
+			.left_margin	= 144,
+			.right_margin	= 0,
+			.upper_margin	= 7,
+			.lower_margin	= 40,
+			.hsync_len	= 96,
+			.vsync_len	= 1,
+		},
+		/*
+		 * - HSYNC active low (1 << 22)
+		 * - VSYNC active low (1 << 23)
+		 * - clk notenabled while idle
+		 * - clock not inverted
+		 * - data not inverted
+		 * - data enable low active
+		 * - enable sharp mode
+		 */
+		.pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
+		.bpp = 32,
+	},
+};
+
+static struct imx_fb_platform_data pcm038_fb_data = {
+	.mode = pcm970_modes,
+	.num_modes = ARRAY_SIZE(pcm970_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
+static struct resource pcm970_sja1000_resources[] = {
+	{
+		.start   = MX27_CS4_BASE_ADDR,
+		.end     = MX27_CS4_BASE_ADDR + 0x100 - 1,
+		.flags   = IORESOURCE_MEM,
+	}, {
+		.start   = IRQ_GPIOE(19),
+		.end     = IRQ_GPIOE(19),
+		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+	.osc_freq	= 16000000,
+	.ocr		= OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
+	.cdr		= CDR_CBP,
+};
+
+static struct platform_device pcm970_sja1000 = {
+	.name = "sja1000_platform",
+	.dev = {
+		.platform_data = &pcm970_sja1000_platform_data,
+	},
+	.resource = pcm970_sja1000_resources,
+	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
+/*
+ * system init for baseboard usage. Will be called by pcm038 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init pcm970_baseboard_init(void)
+{
+	mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
+			"PCM970");
+
+	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+	platform_device_register(&pcm970_sja1000);
+}
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
new file mode 100644
index 000000000000..afc17ce0bb54
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -0,0 +1,46 @@
+/*
+ * i.MX27 Power Management Routines
+ *
+ * Based on Freescale's BSP
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <mach/system.h>
+#include <mach/mx27.h>
+
+static int mx27_suspend_enter(suspend_state_t state)
+{
+	u32 cscr;
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		/* Clear MPEN and SPEN to disable MPLL/SPLL */
+		cscr = __raw_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+		cscr &= 0xFFFFFFFC;
+		__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+		/* Executes WFI */
+		arch_idle();
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct platform_suspend_ops mx27_suspend_ops = {
+	.enter = mx27_suspend_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+static int __init mx27_pm_init(void)
+{
+	suspend_set_ops(&mx27_suspend_ops);
+	return 0;
+}
+
+device_initcall(mx27_pm_init);