Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

   - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
     automotive SoC similar to the ⅹ8a7795 chip we already support, but
     the dts changes rely on a clock driver change that has been merged
     for v4.9 through the clk tree.

   - The Amlogic meson-gxbb (S905) platform gains support for a few
     drivers merged through our tree, in particular the network and usb
     driver changes are required and included here, and also the clk
     tree changes.

   - The Allwinner platforms have seen a large-scale change to their clk
     drivers and the dts file updates must come after that. This
     includes the newly added Nextthing GR8 platform, which is derived
     from sun5i/A13.

   - Some integrator (arm32) changes rely on clk driver changes.

   - A single patch for lpc32xx has no such dependency but wasn't added
     until just before the merge window"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  ARM: dts: lpc32xx: add device node for IRAM on-chip memory
  ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
  ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
  ARM: dts: sun8i: add pinmux for UART1 at PG
  dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
  dts: sun8i-h3: add pinmux definitions for I2C0-2
  dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
  dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
  dts: sun8i-h3: add pinmux definitions for UART2-3
  ARM: dts: sun9i: a80-optimus: Disable EHCI1
  ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
  ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
  ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
  ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
  ...

2 files changed, 13 insertions, 146 deletions

diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index c7bb83205f5b..23b98fd414bf 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -17,33 +17,19 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/string.h>
 #include <linux/syscore_ops.h>
 #include <linux/amba/bus.h>
-#include <linux/amba/kmi.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
-#include <linux/platform_data/clk-integrator.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/stat.h>
 #include <linux/termios.h>
 
-#include <asm/setup.h>
-#include <asm/param.h>		/* HZ */
-#include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 #include "hardware.h"
 #include "cm.h"
@@ -68,14 +54,8 @@ static void __iomem *ebi_base;
 
 /*
  * Logical      Physical
- * ef000000			Cache flush
- * f1100000	11000000	System controller registers
- * f1300000	13000000	Counter/Timer
  * f1400000	14000000	Interrupt controller
  * f1600000	16000000	UART 0
- * f1700000	17000000	UART 1
- * f1a00000	1a000000	Debug LEDs
- * f1b00000	1b000000	GPIO
  */
 
 static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
@@ -89,16 +69,6 @@ static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
 		.pfn		= __phys_to_pfn(INTEGRATOR_UART0_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_DBG_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_DBG_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
 	}
 };
 
@@ -196,16 +166,10 @@ static void __init ap_init_irq_of(void)
 
 /* For the Device Tree, add in the UART callbacks as AUXDATA */
 static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
-		"rtc", NULL),
 	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
 		"uart0", &ap_uart_data),
 	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
 		"uart1", &ap_uart_data),
-	OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
-		"kmi0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
-		"kmi1", NULL),
 	{ /* sentinel */ },
 };
 
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 825298349bf5..772a7cf2010e 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -7,67 +7,40 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License.
  */
-#include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/string.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/kmi.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
-#include <linux/gfp.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/sched_clock.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
 
-#include <asm/setup.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 #include "hardware.h"
 #include "cm.h"
 #include "common.h"
 
+/* Base address to the core module header */
+static struct regmap *cm_map;
 /* Base address to the CP controller */
 static void __iomem *intcp_con_base;
 
-#define INTCP_PA_CLCD_BASE		0xc0000000
+#define CM_COUNTER_OFFSET 0x28
 
 /*
  * Logical      Physical
- * f1000000	10000000	Core module registers
- * f1300000	13000000	Counter/Timer
  * f1400000	14000000	Interrupt controller
  * f1600000	16000000	UART 0
- * f1700000	17000000	UART 1
- * f1a00000	1a000000	Debug LEDs
- * fc900000	c9000000	GPIO
  * fca00000	ca000000	SIC
  */
 
 static struct map_desc intcp_io_desc[] __initdata __maybe_unused = {
 	{
-		.virtual	= IO_ADDRESS(INTEGRATOR_HDR_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_HDR_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_CT_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CT_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
 		.virtual	= IO_ADDRESS(INTEGRATOR_IC_BASE),
 		.pfn		= __phys_to_pfn(INTEGRATOR_IC_BASE),
 		.length		= SZ_4K,
@@ -78,16 +51,6 @@ static struct map_desc intcp_io_desc[] __initdata __maybe_unused = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_DBG_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_DBG_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
 		.virtual	= IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
 		.pfn		= __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
 		.length		= SZ_4K,
@@ -121,66 +84,20 @@ static struct mmci_platform_data mmc_data = {
 	.gpio_cd	= -1,
 };
 
-/*
- * CLCD support
- */
-/*
- * Ensure VGA is selected.
- */
-static void cp_clcd_enable(struct clcd_fb *fb)
-{
-	struct fb_var_screeninfo *var = &fb->fb.var;
-	u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2
-			| CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1;
-
-	if (var->bits_per_pixel <= 8 ||
-	    (var->bits_per_pixel == 16 && var->green.length == 5))
-		/* Pseudocolor, RGB555, BGR555 */
-		val |= CM_CTRL_LCDMUXSEL_VGA555_TFT555;
-	else if (fb->fb.var.bits_per_pixel <= 16)
-		/* truecolor RGB565 */
-		val |= CM_CTRL_LCDMUXSEL_VGA565_TFT555;
-	else
-		val = 0; /* no idea for this, don't trust the docs */
-
-	cm_control(CM_CTRL_LCDMUXSEL_MASK|
-		   CM_CTRL_LCDEN0|
-		   CM_CTRL_LCDEN1|
-		   CM_CTRL_STATIC1|
-		   CM_CTRL_STATIC2|
-		   CM_CTRL_STATIC|
-		   CM_CTRL_n24BITEN, val);
-}
-
-static int cp_clcd_setup(struct clcd_fb *fb)
-{
-	fb->panel = versatile_clcd_get_panel("VGA");
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, SZ_1M);
-}
-
-static struct clcd_board clcd_data = {
-	.name		= "Integrator/CP",
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_RGB565 | CLCD_CAP_888,
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.enable		= cp_clcd_enable,
-	.setup		= cp_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-#define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
-
 static u64 notrace intcp_read_sched_clock(void)
 {
-	return readl(REFCOUNTER);
+	unsigned int val;
+
+	/* MMIO so discard return code */
+	regmap_read(cm_map, CM_COUNTER_OFFSET, &val);
+	return val;
 }
 
 static void __init intcp_init_early(void)
 {
+	cm_map = syscon_regmap_lookup_by_compatible("arm,core-module-integrator");
+	if (IS_ERR(cm_map))
+		return;
 	sched_clock_register(intcp_read_sched_clock, 32, 24000000);
 }
 
@@ -195,22 +112,8 @@ static void __init intcp_init_irq_of(void)
  * and enforce the bus names since these are used for clock lookups.
  */
 static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
-		"rtc", NULL),
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
-		"uart0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
-		"uart1", NULL),
-	OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
-		"kmi0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
-		"kmi1", NULL),
 	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_MMC_BASE,
 		"mmci", &mmc_data),
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_AACI_BASE,
-		"aaci", &mmc_data),
-	OF_DEV_AUXDATA("arm,primecell", INTCP_PA_CLCD_BASE,
-		"clcd", &clcd_data),
 	{ /* sentinel */ },
 };