Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
  ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
  ARM: S3C2443: Remove #if 0 for clk_mpll
  ARM: S3C2443: Update notes on MPLLREF clock
  ARM: S3C2443: Further clksrc-clk conversions
  ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
  USB: Fix s3c-hsotg build following Samsung platform header moves
  ARM: S3C64XX: Reintroduce unconditional build of audio device
  ARM: 5961/1: ux500: fix CLKRST addresses
  ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
  ASoC: Fix S3C64xx IIS driver for Samsung header reorg
  ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
  [ARM] pxa: fix typo in mxm8x10.h
  [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
  [ARM] pxa/zeus: Add support for mcp2515 CAN bus
  [ARM] pxa/zeus: Add support for onboard max6369 watchdog
  [ARM] pxa/zeus: Add Eurotech as the manufacturer
  [ARM] pxa/zeus: Correct the USB host initialisation flags
  [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
  [ARM] pxa: refactor uncompress.h for non-PXA uarts
  [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
  ...

1 files changed, 118 insertions, 0 deletions

diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
new file mode 100644
index 000000000000..ad3f1ec33796
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/mach-kirkwood/openrd-setup.c
+ *
+ * Marvell OpenRD (Base|Client) Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_nand_parts[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE
+	}, {
+		.name		= "uImage",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= SZ_4M
+	}, {
+		.name		= "root",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data openrd_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data openrd_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(24),
+};
+
+static struct mv_sata_platform_data openrd_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct mvsdio_platform_data openrd_mvsdio_data = {
+	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_mpp_config[] __initdata = {
+	MPP29_GPIO,
+	0
+};
+
+static void __init openrd_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(openrd_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
+
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&openrd_ge00_data);
+	if (machine_is_openrd_client())
+		kirkwood_ge01_init(&openrd_ge01_data);
+	kirkwood_sata_init(&openrd_sata_data);
+	kirkwood_sdio_init(&openrd_mvsdio_data);
+
+	kirkwood_i2c_init();
+}
+
+static int __init openrd_pci_init(void)
+{
+	if (machine_is_openrd_base() || machine_is_openrd_client())
+		kirkwood_pcie_init();
+
+	return 0;
+}
+subsys_initcall(openrd_pci_init);
+
+#ifdef CONFIG_MACH_OPENRD_BASE
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_OPENRD_CLIENT
+MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif