Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...

16 files changed, 7 insertions, 300 deletions

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index d018ad4bcc3c..503d7dd944ff 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -46,6 +46,11 @@ config MACH_GURUPLUG
 
 config ARCH_KIRKWOOD_DT
 	bool "Marvell Kirkwood Flattened Device Tree"
+	select POWER_SUPPLY
+	select POWER_RESET
+	select POWER_RESET_GPIO
+	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
 	select USE_OF
 	help
 	  Say 'Y' here if you want your kernel to support the
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index 43d16d6714b8..a1aa87f09180 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -17,51 +17,11 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data dnskw_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int dnskw_mpp_config[] __initdata = {
-	MPP13_UART1_TXD,	/* Custom ... */
-	MPP14_UART1_RXD,	/* ... Controller (DNS-320 only) */
-	MPP20_SATA1_ACTn,	/* LED: White Right HDD */
-	MPP21_SATA0_ACTn,	/* LED: White Left HDD */
-	MPP24_GPIO,
-	MPP25_GPIO,
-	MPP26_GPIO,	/* LED: Power */
-	MPP27_GPIO,	/* LED: Red Right HDD */
-	MPP28_GPIO,	/* LED: Red Left HDD */
-	MPP29_GPIO,	/* LED: Red USB (DNS-325 only) */
-	MPP30_GPIO,
-	MPP31_GPIO,
-	MPP32_GPIO,
-	MPP33_GPO,
-	MPP34_GPIO,	/* Button: Front power */
-	MPP35_GPIO,	/* LED: Red USB (DNS-320 only) */
-	MPP36_GPIO,	/* Power: Turn off board */
-	MPP37_GPIO,	/* Power: Turn back on after power failure */
-	MPP38_GPIO,
-	MPP39_GPIO,	/* Power: SATA0 */
-	MPP40_GPIO,	/* Power: SATA1 */
-	MPP41_GPIO,	/* SATA0 present */
-	MPP42_GPIO,	/* SATA1 present */
-	MPP43_GPIO,	/* LED: White USB */
-	MPP44_GPIO,	/* Fan: Tachometer Pin */
-	MPP45_GPIO,	/* Fan: high speed */
-	MPP46_GPIO,	/* Fan: low speed */
-	MPP47_GPIO,	/* Button: Back unmount */
-	MPP48_GPIO,	/* Button: Back reset */
-	MPP49_GPIO,	/* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */
-	0
-};
-
-static void dnskw_power_off(void)
-{
-	gpio_set_value(36, 1);
-}
-
 /* Register any GPIO for output and set the value */
 static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
 {
@@ -76,22 +36,8 @@ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
 
 void __init dnskw_init(void)
 {
-	kirkwood_mpp_conf(dnskw_mpp_config);
-
-	kirkwood_ehci_init();
 	kirkwood_ge00_init(&dnskw_ge00_data);
 
-	/* Register power-off GPIO. */
-	if (gpio_request(36, "dnskw:power:off") == 0
-	    && gpio_direction_output(36, 0) == 0)
-		pm_power_off = dnskw_power_off;
-	else
-		pr_err("dnskw: failed to configure power-off GPIO\n");
-
-	/* Ensure power is supplied to both HDDs */
-	dnskw_gpio_register(39, "dnskw:power:sata0", 1);
-	dnskw_gpio_register(40, "dnskw:power:sata1", 1);
-
 	/* Set NAS to turn back on after a power failure */
 	dnskw_gpio_register(37, "dnskw:power:recover", 1);
 }
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c
index 6912882b0aa9..d7196db33984 100644
--- a/arch/arm/mach-kirkwood/board-dockstar.c
+++ b/arch/arm/mach-kirkwood/board-dockstar.c
@@ -17,32 +17,16 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data dockstar_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
-static unsigned int dockstar_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP46_GPIO,	/* LED green */
-	MPP47_GPIO,	/* LED orange */
-	0
-};
-
 void __init dockstar_dt_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(dockstar_mpp_config);
-
-	if (gpio_request(29, "USB Power Enable") != 0 ||
-	    gpio_direction_output(29, 1) != 0)
-		pr_err("can't setup GPIO 29 (USB Power Enable)\n");
-	kirkwood_ehci_init();
-
 	kirkwood_ge00_init(&dockstar_ge00_data);
 }
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index 8a8ebe09e512..08248e24ffcd 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -17,7 +17,6 @@
 #include <linux/gpio.h>
 #include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
@@ -31,25 +30,11 @@ static struct mvsdio_platform_data dreamplug_mvsdio_data = {
 	/* unfortunately the CD signal has not been connected */
 };
 
-static unsigned int dreamplug_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP47_GPIO,	/* Bluetooth LED */
-	MPP48_GPIO,	/* Wifi LED */
-	MPP49_GPIO,	/* Wifi AP LED */
-	0
-};
-
 void __init dreamplug_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(dreamplug_mpp_config);
-
-	kirkwood_ehci_init();
 	kirkwood_ge00_init(&dreamplug_ge00_data);
 	kirkwood_ge01_init(&dreamplug_ge01_data);
 	kirkwood_sdio_init(&dreamplug_mvsdio_data);
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
index 5dcd0d62aa42..9db979aec82e 100644
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -19,40 +19,16 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
-static unsigned int goflexnet_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP47_GPIO,	/* LED Orange */
-	MPP46_GPIO,	/* LED Green */
-	MPP45_GPIO,	/* LED Left Capacity 3 */
-	MPP44_GPIO,	/* LED Left Capacity 2 */
-	MPP43_GPIO,	/* LED Left Capacity 1 */
-	MPP42_GPIO,	/* LED Left Capacity 0 */
-	MPP41_GPIO,	/* LED Right Capacity 3 */
-	MPP40_GPIO,	/* LED Right Capacity 2 */
-	MPP39_GPIO,	/* LED Right Capacity 1 */
-	MPP38_GPIO,	/* LED Right Capacity 0 */
-	0
-};
-
 void __init goflexnet_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(goflexnet_mpp_config);
-
-	if (gpio_request(29, "USB Power Enable") != 0 ||
-	    gpio_direction_output(29, 1) != 0)
-		pr_err("can't setup GPIO 29 (USB Power Enable)\n");
-	kirkwood_ehci_init();
-
 	kirkwood_ge00_init(&goflexnet_ge00_data);
 }
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index 6d3a56421142..9f6f496380d8 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -14,52 +14,17 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
 #include <linux/input.h>
 #include "common.h"
-#include "mpp.h"
-
-#define IB62X0_GPIO_POWER_OFF	24
 
 static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int ib62x0_mpp_config[] __initdata = {
-	MPP0_NF_IO2,
-	MPP1_NF_IO3,
-	MPP2_NF_IO4,
-	MPP3_NF_IO5,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP22_GPIO,	/* OS LED red */
-	MPP24_GPIO,	/* Power off device */
-	MPP25_GPIO,	/* OS LED green */
-	MPP27_GPIO,	/* USB transfer LED */
-	MPP28_GPIO,	/* Reset button */
-	MPP29_GPIO,	/* USB Copy button */
-	0
-};
-
-static void ib62x0_power_off(void)
-{
-	gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
-}
-
 void __init ib62x0_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(ib62x0_mpp_config);
-
-	kirkwood_ehci_init();
 	kirkwood_ge00_init(&ib62x0_ge00_data);
-	if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
-	    gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = ib62x0_power_off;
-	else
-		pr_err("board-ib62x0: failed to configure power-off GPIO\n");
 }
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index 24f5aa7f698b..c8ebde4919e2 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -13,31 +13,13 @@
 #include <linux/of.h>
 #include <linux/mv643xx_eth.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data iconnect_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
 };
 
-static unsigned int iconnect_mpp_config[] __initdata = {
-	MPP12_GPIO,
-	MPP35_GPIO,
-	MPP41_GPIO,
-	MPP42_GPIO,
-	MPP43_GPIO,
-	MPP44_GPIO,
-	MPP45_GPIO,
-	MPP46_GPIO,
-	MPP47_GPIO,
-	MPP48_GPIO,
-	0
-};
-
 void __init iconnect_init(void)
 {
-	kirkwood_mpp_conf(iconnect_mpp_config);
-
-	kirkwood_ehci_init();
 	kirkwood_ge00_init(&iconnect_ge00_data);
 }
 
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
index e4ed62c28f54..f655b2637b0e 100644
--- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
@@ -13,7 +13,6 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
 	.phy_addr       = MV643XX_ETH_PHY_NONE,
@@ -21,35 +20,10 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
 	.duplex         = DUPLEX_FULL,
 };
 
-static unsigned int iomega_ix2_200_mpp_config[] __initdata = {
-	MPP12_GPIO,			/* Reset Button */
-	MPP14_GPIO,			/* Power Button */
-	MPP15_GPIO,			/* Backup LED (blue) */
-	MPP16_GPIO,			/* Power LED (white) */
-	MPP35_GPIO,			/* OTB Button */
-	MPP36_GPIO,			/* Rebuild LED (white) */
-	MPP37_GPIO,			/* Health LED (red) */
-	MPP38_GPIO,			/* SATA LED brightness control 1 */
-	MPP39_GPIO,			/* SATA LED brightness control 2 */
-	MPP40_GPIO,			/* Backup LED brightness control 1 */
-	MPP41_GPIO,			/* Backup LED brightness control 2 */
-	MPP42_GPIO,			/* Power LED brightness control 1 */
-	MPP43_GPIO,			/* Power LED brightness control 2 */
-	MPP44_GPIO,			/* Health LED brightness control 1 */
-	MPP45_GPIO,			/* Health LED brightness control 2 */
-	MPP46_GPIO,			/* Rebuild LED brightness control 1 */
-	MPP47_GPIO,			/* Rebuild LED brightness control 2 */
-	0
-};
-
 void __init iomega_ix2_200_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(iomega_ix2_200_mpp_config);
-
-	kirkwood_ehci_init();
-
 	kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
 }
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c
index f7d32834b757..44e4605ba0bf 100644
--- a/arch/arm/mach-kirkwood/board-km_kirkwood.c
+++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c
@@ -18,27 +18,15 @@
 #include <linux/clk.h>
 #include <linux/clk-private.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
-static unsigned int km_kirkwood_mpp_config[] __initdata = {
-	MPP8_GPIO,	/* I2C SDA */
-	MPP9_GPIO,	/* I2C SCL */
-	0
-};
-
 void __init km_kirkwood_init(void)
 {
 	struct clk *sata_clk;
 	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_mpp_conf(km_kirkwood_mpp_config);
-
-	/*
 	 * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
 	 * SATA bits (14-15) of the Clock Gating Control Register. Since these
 	 * devices are also not present in this variant, their clocks get
@@ -52,6 +40,5 @@ void __init km_kirkwood_init(void)
 	if (!IS_ERR(sata_clk))
 		sata_clk->flags |= CLK_IGNORE_UNUSED;
 
-	kirkwood_ehci_init();
 	kirkwood_ge00_init(&km_kirkwood_ge00_data);
 }
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
index 7e18cad9b796..4ec8b7ae784a 100644
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -15,9 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data lsxl_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
@@ -27,23 +25,6 @@ static struct mv643xx_eth_platform_data lsxl_ge01_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int lsxl_mpp_config[] __initdata = {
-	MPP10_GPO,	/* HDD Power Enable */
-	MPP11_GPIO,	/* USB Vbus Enable */
-	MPP18_GPO,	/* FAN High Enable# */
-	MPP19_GPO,	/* FAN Low Enable# */
-	MPP36_GPIO,	/* Function Blue LED */
-	MPP37_GPIO,	/* Alarm LED */
-	MPP38_GPIO,	/* Info LED */
-	MPP39_GPIO,	/* Power LED */
-	MPP40_GPIO,	/* Fan Lock */
-	MPP41_GPIO,	/* Function Button */
-	MPP42_GPIO,	/* Power Switch */
-	MPP43_GPIO,	/* Power Auto Switch */
-	MPP48_GPIO,	/* Function Red LED */
-	0
-};
-
 /*
  * On the LS-XHL/LS-CHLv2, the shutdown process is following:
  * - Userland monitors key events until the power switch goes to off position
@@ -57,21 +38,12 @@ static void lsxl_power_off(void)
 	kirkwood_restart('h', NULL);
 }
 
-#define LSXL_GPIO_HDD_POWER 10
-#define LSXL_GPIO_USB_POWER 11
-
 void __init lsxl_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(lsxl_mpp_config);
-
-	/* usb and sata power on */
-	gpio_set_value(LSXL_GPIO_USB_POWER, 1);
-	gpio_set_value(LSXL_GPIO_HDD_POWER, 1);
 
-	kirkwood_ehci_init();
 	kirkwood_ge00_init(&lsxl_ge00_data);
 	kirkwood_ge01_init(&lsxl_ge01_data);
 
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
index e78a227468e6..56bfe5a1605a 100644
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -24,52 +24,16 @@ static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(2),
 };
 
-static unsigned int mplcec4_mpp_config[] __initdata = {
-	MPP0_NF_IO2,
-	MPP1_NF_IO3,
-	MPP2_NF_IO4,
-	MPP3_NF_IO5,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP6_SYSRST_OUTn,
-	MPP7_GPO,	/* Status LED Green High Active */
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP12_SD_CLK,
-	MPP13_SD_CMD,	/* Alt UART1_TXD */
-	MPP14_SD_D0,	/* Alt UART1_RXD */
-	MPP15_SD_D1,
-	MPP16_SD_D2,
-	MPP17_SD_D3,
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP28_GPIO,	/* Input SYS_POR_DET (active High) */
-	MPP29_GPIO,	/* Input SYS_RTC_INT (active High) */
-	MPP34_SATA1_ACTn,
-	MPP35_SATA0_ACTn,
-	MPP40_GPIO,	/* LED User1 orange */
-	MPP41_GPIO,	/* LED User1 green */
-	MPP44_GPIO,	/* LED User0 orange */
-	MPP45_GPIO,	/* LED User0 green */
-	MPP46_GPIO,	/* Status LED Yellow High Active */
-	MPP47_GPIO,	/* SD_CD# (in/IRQ)*/
-	0
-};
-
-
 static struct mvsdio_platform_data mplcec4_mvsdio_data = {
 	.gpio_card_detect = 47,	/* MPP47 used as SD card detect */
 };
 
 
-
 void __init mplcec4_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(mplcec4_mpp_config);
-	kirkwood_ehci_init();
 	kirkwood_ge00_init(&mplcec4_ge00_data);
 	kirkwood_ge01_init(&mplcec4_ge01_data);
 	kirkwood_sdio_init(&mplcec4_mvsdio_data);
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index 78596c4f76d2..8821720ab5a4 100644
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -73,7 +73,6 @@ void __init ns2_init(void)
 	 */
 	kirkwood_mpp_conf(ns2_mpp_config);
 
-	kirkwood_ehci_init();
 	if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
 	    of_machine_is_compatible("lacie,netspace_mini_v2"))
 		ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c
index 027ce83f3fe5..f58d2e1a4042 100644
--- a/arch/arm/mach-kirkwood/board-nsa310.c
+++ b/arch/arm/mach-kirkwood/board-nsa310.c
@@ -85,10 +85,6 @@ void __init nsa310_init(void)
 
 	nsa310_gpio_init();
 
-	/* this can be removed once the mainline kirkwood.dtsi gets
-	 * the ehci configuration by default */
-	kirkwood_ehci_init();
-
 	kirkwood_pcie_id(&dev, &rev);
 
 	i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c
index e807e8cfdd44..815fc6451d52 100644
--- a/arch/arm/mach-kirkwood/board-openblocks_a6.c
+++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c
@@ -55,8 +55,8 @@ static unsigned int openblocks_a6_mpp_config[] __initdata = {
 	MPP38_GPIO, /* INIT */
 	MPP39_GPIO, /* USB OC */
 	MPP41_GPIO, /* LED: Red */
-	MPP42_GPIO, /* LED: Yellow */
-	MPP43_GPIO, /* LED: Green */
+	MPP42_GPIO, /* LED: Green */
+	MPP43_GPIO, /* LED: Yellow */
 	0,
 };
 
@@ -66,6 +66,5 @@ void __init openblocks_a6_init(void)
 	 * Basic setup. Needs to be called early.
 	 */
 	kirkwood_mpp_conf(openblocks_a6_mpp_config);
-	kirkwood_ehci_init();
 	kirkwood_ge00_init(&openblocks_ge00_data);
 }
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index f3bfedae3a20..acb0187c7ee1 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -23,47 +23,21 @@
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include "common.h"
-#include "mpp.h"
 #include "tsx1x-common.h"
 
 static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int qnap_ts219_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP4_SATA1_ACTn,
-	MPP5_SATA0_ACTn,
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP13_UART1_TXD,	/* PIC controller */
-	MPP14_UART1_RXD,	/* PIC controller */
-	MPP15_GPIO,		/* USB Copy button (on devices with 88F6281) */
-	MPP16_GPIO,		/* Reset button (on devices with 88F6281) */
-	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
-	MPP37_GPIO,		/* Reset button (on devices with 88F6282) */
-	MPP43_GPIO,		/* USB Copy button (on devices with 88F6282) */
-	MPP44_GPIO,		/* Board ID: 0: TS-11x, 1: TS-21x */
-	0
-};
-
 void __init qnap_dt_ts219_init(void)
 {
 	u32 dev, rev;
 
-	kirkwood_mpp_conf(qnap_ts219_mpp_config);
-
 	kirkwood_pcie_id(&dev, &rev);
 	if (dev == MV88F6282_DEV_ID)
 		qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
 
 	kirkwood_ge00_init(&qnap_ts219_ge00_data);
-	kirkwood_ehci_init();
 
 	pm_power_off = qnap_tsx1x_power_off;
 }
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
index e2ec9d891fe3..15e69fcde9f4 100644
--- a/arch/arm/mach-kirkwood/board-usi_topkick.c
+++ b/arch/arm/mach-kirkwood/board-usi_topkick.c
@@ -76,7 +76,6 @@ void __init usi_topkick_init(void)
 	/* SATA0 power enable */
 	gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1);
 
-	kirkwood_ehci_init();
 	kirkwood_ge00_init(&topkick_ge00_data);
 	kirkwood_sdio_init(&topkick_mvsdio_data);
 }