ARM i.MX51: Full iomux support

This iomux file has been constructed from the Freescale pinmux tool.
It contains all pins from the tool, but the datasheet lists some
configurations not present in the tool, these are not yet added.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 19 insertions, 19 deletions

diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 24e335ca7627..1d231e84107c 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -95,8 +95,8 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
 	MX51_PAD_KEY_COL5__I2C2_SDA,
 
 	/* HSI2C */
-	MX51_PAD_I2C1_CLK__HSI2C_CLK,
-	MX51_PAD_I2C1_DAT__HSI2C_DAT,
+	MX51_PAD_I2C1_CLK__I2C1_CLK,
+	MX51_PAD_I2C1_DAT__I2C1_DAT,
 
 	/* USB HOST1 */
 	MX51_PAD_USBH1_CLK__USBH1_CLK,
@@ -112,29 +112,29 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
 	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
 
 	/* USB HUB reset line*/
-	MX51_PAD_GPIO_1_7__GPIO_1_7,
+	MX51_PAD_GPIO1_7__GPIO1_7,
 
 	/* FEC */
 	MX51_PAD_EIM_EB2__FEC_MDIO,
-	MX51_PAD_EIM_EB3__FEC_RDAT1,
-	MX51_PAD_EIM_CS2__FEC_RDAT2,
-	MX51_PAD_EIM_CS3__FEC_RDAT3,
+	MX51_PAD_EIM_EB3__FEC_RDATA1,
+	MX51_PAD_EIM_CS2__FEC_RDATA2,
+	MX51_PAD_EIM_CS3__FEC_RDATA3,
 	MX51_PAD_EIM_CS4__FEC_RX_ER,
 	MX51_PAD_EIM_CS5__FEC_CRS,
 	MX51_PAD_NANDF_RB2__FEC_COL,
-	MX51_PAD_NANDF_RB3__FEC_RXCLK,
-	MX51_PAD_NANDF_RB6__FEC_RDAT0,
-	MX51_PAD_NANDF_RB7__FEC_TDAT0,
+	MX51_PAD_NANDF_RB3__FEC_RX_CLK,
+	MX51_PAD_NANDF_D9__FEC_RDATA0,
+	MX51_PAD_NANDF_D8__FEC_TDATA0,
 	MX51_PAD_NANDF_CS2__FEC_TX_ER,
 	MX51_PAD_NANDF_CS3__FEC_MDC,
-	MX51_PAD_NANDF_CS4__FEC_TDAT1,
-	MX51_PAD_NANDF_CS5__FEC_TDAT2,
-	MX51_PAD_NANDF_CS6__FEC_TDAT3,
+	MX51_PAD_NANDF_CS4__FEC_TDATA1,
+	MX51_PAD_NANDF_CS5__FEC_TDATA2,
+	MX51_PAD_NANDF_CS6__FEC_TDATA3,
 	MX51_PAD_NANDF_CS7__FEC_TX_EN,
 	MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
 
 	/* FEC PHY reset line */
-	MX51_PAD_EIM_A20__GPIO_2_14,
+	MX51_PAD_EIM_A20__GPIO2_14,
 
 	/* SD 1 */
 	MX51_PAD_SD1_CMD__SD1_CMD,
@@ -156,8 +156,8 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
 	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
 	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
 	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_CSPI1_SS0__GPIO_4_24,
-	MX51_PAD_CSPI1_SS1__GPIO_4_25,
+	MX51_PAD_CSPI1_SS0__GPIO4_24,
+	MX51_PAD_CSPI1_SS1__GPIO4_25,
 };
 
 /* Serial ports */
@@ -188,8 +188,8 @@ static struct imxi2c_platform_data babbage_hsi2c_data = {
 
 static int gpio_usbh1_active(void)
 {
-	iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27;
-	iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO_2_5;
+	iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
+	iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO2_5;
 	int ret;
 
 	/* Set USBH1_STP to GPIO and toggle it */
@@ -352,8 +352,8 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
 static void __init mxc_board_init(void)
 {
 	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-	iomux_v3_cfg_t power_key = (MX51_PAD_EIM_A27__GPIO_2_21 &
-				~MUX_PAD_CTRL_MASK) | MX51_GPIO_PAD_CTRL_2;
+	iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
+		MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
 
 #if defined(CONFIG_CPU_FREQ_IMX)
 	get_cpu_op = mx51_get_cpu_op;