omap mmc: Add better MMC low-level init

This will simplify the MMC low-level init, and make it more
flexible to add support for a newer MMC controller in the
following patches.

The patch rearranges platform data and gets rid of slot vs
controller confusion in the old data structures. Also fix
device id numbering in the clock code.

Some code snippets are based on an earlier patch by
Russell King <linux@arm.linux.org.uk>.

Cc: Pierre Ossman <drzeus-mmc@drzeus.cx>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 90 insertions, 0 deletions

diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index e382b438c64e..024dab13d4b4 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -22,6 +22,7 @@
 #include <mach/board.h>
 #include <mach/mux.h>
 #include <mach/gpio.h>
+#include <mach/mmc.h>
 
 /*-------------------------------------------------------------------------*/
 
@@ -99,6 +100,95 @@ static inline void omap_init_mbox(void)
 static inline void omap_init_mbox(void) { }
 #endif
 
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
+			int controller_nr)
+{
+	if (controller_nr == 0) {
+		omap_cfg_reg(MMC_CMD);
+		omap_cfg_reg(MMC_CLK);
+		omap_cfg_reg(MMC_DAT0);
+		if (cpu_is_omap1710()) {
+			omap_cfg_reg(M15_1710_MMC_CLKI);
+			omap_cfg_reg(P19_1710_MMC_CMDDIR);
+			omap_cfg_reg(P20_1710_MMC_DATDIR0);
+		}
+		if (mmc_controller->slots[0].wire4) {
+			omap_cfg_reg(MMC_DAT1);
+			/* NOTE: DAT2 can be on W10 (here) or M15 */
+			if (!mmc_controller->slots[0].nomux)
+				omap_cfg_reg(MMC_DAT2);
+			omap_cfg_reg(MMC_DAT3);
+		}
+	}
+
+	/* Block 2 is on newer chips, and has many pinout options */
+	if (cpu_is_omap16xx() && controller_nr == 1) {
+		if (!mmc_controller->slots[1].nomux) {
+			omap_cfg_reg(Y8_1610_MMC2_CMD);
+			omap_cfg_reg(Y10_1610_MMC2_CLK);
+			omap_cfg_reg(R18_1610_MMC2_CLKIN);
+			omap_cfg_reg(W8_1610_MMC2_DAT0);
+			if (mmc_controller->slots[1].wire4) {
+				omap_cfg_reg(V8_1610_MMC2_DAT1);
+				omap_cfg_reg(W15_1610_MMC2_DAT2);
+				omap_cfg_reg(R10_1610_MMC2_DAT3);
+			}
+
+			/* These are needed for the level shifter */
+			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
+			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
+			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
+		}
+
+		/* Feedback clock must be set on OMAP-1710 MMC2 */
+		if (cpu_is_omap1710())
+			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
+					MOD_CONF_CTRL_1);
+	}
+}
+
+void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+			int nr_controllers)
+{
+	int i;
+
+	for (i = 0; i < nr_controllers; i++) {
+		unsigned long base, size;
+		unsigned int irq = 0;
+
+		if (!mmc_data[i])
+			continue;
+
+		omap1_mmc_mux(mmc_data[i], i);
+
+		switch (i) {
+		case 0:
+			base = OMAP1_MMC1_BASE;
+			irq = INT_MMC;
+			break;
+		case 1:
+			if (!cpu_is_omap16xx())
+				return;
+			base = OMAP1_MMC2_BASE;
+			irq = INT_1610_MMC2;
+			break;
+		default:
+			continue;
+		}
+		size = OMAP1_MMC_SIZE;
+
+		omap_mmc_add(i, base, size, irq, mmc_data[i]);
+	};
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 #if defined(CONFIG_OMAP_STI)
 
 #define OMAP1_STI_BASE		0xfffea000