Merge tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-cricitical bug fixes from Arnd Bergmann:
 "These are various bug fixes that were not considered important enough
  for merging into 3.10.

  The majority of the ARM fixes are for the OMAP and at91 platforms, and
  there is another set of bug fixes for device drivers that resolve
  'randconfig' build errors and that the subsystem maintainers either
  did not pick up or preferred to get merged through the arm-soc tree."

* tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  ARM: at91/PMC: use at91_usb_rate() for UTMI PLL
  ARM: at91/PMC: fix at91sam9n12 USB FS init
  ARM: at91/PMC: at91sam9n12 family has a PLLB
  ARM: at91/PMC: sama5d3 family doesn't have a PLLB
  ARM: tegra: fix section mismatch in tegra_pmc_parse_dt
  ARM: mxs: don't select HAVE_PWM
  ARM: mxs: stub out mxs_pm_init for !CONFIG_PM
  cpuidle: calxeda: select ARM_CPU_SUSPEND
  ARM: mvebu: fix length of ethernet registers in mv78260 dtsi
  ARM: at91: cpuidle: Fix target_residency
  ARM: at91: fix at91_extern_irq usage for non-dt boards
  ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessary
  clocksource: kona: adapt to CLOCKSOURCE_OF_DECLARE change
  X.509: do not emit any informational output
  mtd: omap2: allow bulding as a module
  [SCSI] nsp32: use mdelay instead of large udelay constants
  hwrng: bcm2835: fix MODULE_LICENSE tag
  ARM: at91: Change the internal SRAM memory type MT_MEMORY_NONCACHED
  ARM: at91: Fix link breakage when !CONFIG_PHYLIB
  MAINTAINERS: Add exynos filename match to ARM/S5P EXYNOS ARM ARCHITECTURES
  ...

1 files changed, 56 insertions, 50 deletions

diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index aa27d7f5cbb7..609b330e5110 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -28,6 +28,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/usb/phy.h>
+#include <linux/usb/nop-usb-xceiv.h>
 
 #include "soc.h"
 #include "omap_device.h"
@@ -560,7 +561,8 @@ static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
 	struct regulator_init_data *reg_data;
 	struct fixed_voltage_config *config;
 	struct platform_device *pdev;
-	int ret;
+	struct platform_device_info pdevinfo;
+	int ret = -ENOMEM;
 
 	supplies = kzalloc(sizeof(*supplies), GFP_KERNEL);
 	if (!supplies)
@@ -571,7 +573,7 @@ static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
 
 	reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL);
 	if (!reg_data)
-		return -ENOMEM;
+		goto err_data;
 
 	reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
 	reg_data->consumer_supplies = supplies;
@@ -580,39 +582,53 @@ static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
 	config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
 			GFP_KERNEL);
 	if (!config)
-		return -ENOMEM;
+		goto err_config;
+
+	config->supply_name = kstrdup(name, GFP_KERNEL);
+	if (!config->supply_name)
+		goto err_supplyname;
 
-	config->supply_name = name;
 	config->gpio = gpio;
 	config->enable_high = polarity;
 	config->init_data = reg_data;
 
 	/* create a regulator device */
-	pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
-	if (!pdev)
-		return -ENOMEM;
+	memset(&pdevinfo, 0, sizeof(pdevinfo));
+	pdevinfo.name = reg_name;
+	pdevinfo.id = PLATFORM_DEVID_AUTO;
+	pdevinfo.data = config;
+	pdevinfo.size_data = sizeof(*config);
 
-	pdev->id = PLATFORM_DEVID_AUTO;
-	pdev->name = reg_name;
-	pdev->dev.platform_data = config;
+	pdev = platform_device_register_full(&pdevinfo);
+	if (IS_ERR(pdev)) {
+		ret = PTR_ERR(pdev);
+		pr_err("%s: Failed registering regulator %s for %s : %d\n",
+				__func__, name, dev_id, ret);
+		goto err_register;
+	}
 
-	ret = platform_device_register(pdev);
-	if (ret)
-		pr_err("%s: Failed registering regulator %s for %s\n",
-				__func__, name, dev_id);
+	return 0;
 
+err_register:
+	kfree(config->supply_name);
+err_supplyname:
+	kfree(config);
+err_config:
+	kfree(reg_data);
+err_data:
+	kfree(supplies);
 	return ret;
 }
 
+#define MAX_STR 20
+
 int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 {
-	char *rail_name;
-	int i, len;
+	char rail_name[MAX_STR];
+	int i;
 	struct platform_device *pdev;
 	char *phy_id;
-
-	/* the phy_id will be something like "nop_usb_xceiv.1" */
-	len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */
+	struct platform_device_info pdevinfo;
 
 	for (i = 0; i < num_phys; i++) {
 
@@ -627,25 +643,26 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 			!gpio_is_valid(phy->vcc_gpio))
 			continue;
 
-		/* create a NOP PHY device */
-		pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
-		if (!pdev)
-			return -ENOMEM;
-
-		pdev->id = phy->port;
-		pdev->name = nop_name;
-		pdev->dev.platform_data = phy->platform_data;
-
-		phy_id = kmalloc(len, GFP_KERNEL);
-		if (!phy_id)
+		phy_id = kmalloc(MAX_STR, GFP_KERNEL);
+		if (!phy_id) {
+			pr_err("%s: kmalloc() failed\n", __func__);
 			return -ENOMEM;
+		}
 
-		scnprintf(phy_id, len, "nop_usb_xceiv.%d\n",
-					pdev->id);
-
-		if (platform_device_register(pdev)) {
-			pr_err("%s: Failed to register device %s\n",
-				__func__,  phy_id);
+		/* create a NOP PHY device */
+		memset(&pdevinfo, 0, sizeof(pdevinfo));
+		pdevinfo.name = nop_name;
+		pdevinfo.id = phy->port;
+		pdevinfo.data = phy->platform_data;
+		pdevinfo.size_data = sizeof(struct nop_usb_xceiv_platform_data);
+
+		scnprintf(phy_id, MAX_STR, "nop_usb_xceiv.%d",
+					phy->port);
+		pdev = platform_device_register_full(&pdevinfo);
+		if (IS_ERR(pdev)) {
+			pr_err("%s: Failed to register device %s : %ld\n",
+				__func__,  phy_id, PTR_ERR(pdev));
+			kfree(phy_id);
 			continue;
 		}
 
@@ -653,26 +670,15 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 
 		/* Do we need RESET regulator ? */
 		if (gpio_is_valid(phy->reset_gpio)) {
-
-			rail_name = kmalloc(13, GFP_KERNEL);
-			if (!rail_name)
-				return -ENOMEM;
-
-			scnprintf(rail_name, 13, "hsusb%d_reset", phy->port);
-
+			scnprintf(rail_name, MAX_STR,
+					"hsusb%d_reset", phy->port);
 			usbhs_add_regulator(rail_name, phy_id, "reset",
 						phy->reset_gpio, 1);
 		}
 
 		/* Do we need VCC regulator ? */
 		if (gpio_is_valid(phy->vcc_gpio)) {
-
-			rail_name = kmalloc(13, GFP_KERNEL);
-			if (!rail_name)
-				return -ENOMEM;
-
-			scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port);
-
+			scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);
 			usbhs_add_regulator(rail_name, phy_id, "vcc",
 					phy->vcc_gpio, phy->vcc_polarity);
 		}