clk: convert ARM RealView to common clk

This converts the ARM RealView machine over to using the common
clock. The approach is similar to the one used for the Integrator,
and we're reusing the ICST wrapper code.

We have to put the clock intialization in the timer init function
for the clocks to be available when initializing the timer,
keeping them in early_init() is too early for the common clk.

Since we now have to go down and compile drivers/clk/versatile
a CONFIG_COMMON_CLK_VERSATILE symbol has been added so the proper
code gets compiled into the kernel for either machine. A leftover
CLK_VERSATILE in the Integrator Kconfig was fixed up to use
the new symbol as well.

Tested on ARM RealView PB1176.

Cc: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

7 files changed, 10 insertions, 122 deletions

diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 45868bb43cbd..ff007d15e0ec 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -30,7 +30,6 @@
 #include <linux/ata_platform.h>
 #include <linux/amba/mmci.h>
 #include <linux/gfp.h>
-#include <linux/clkdev.h>
 #include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
@@ -226,115 +225,10 @@ struct mmci_platform_data realview_mmc1_plat_data = {
 	.cd_invert	= true,
 };
 
-/*
- * Clock handling
- */
-static const struct icst_params realview_oscvco_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST307_VCO_MAX,
-	.vco_min	= ICST307_VCO_MIN,
-	.vd_min		= 4 + 8,
-	.vd_max		= 511 + 8,
-	.rd_min		= 1 + 2,
-	.rd_max		= 127 + 2,
-	.s2div		= icst307_s2div,
-	.idx2s		= icst307_idx2s,
-};
-
-static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
-{
-	void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
-	u32 val;
-
-	val = readl(clk->vcoreg) & ~0x7ffff;
-	val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, sys_lock);
-	writel(val, clk->vcoreg);
-	writel(0, sys_lock);
-}
-
-static const struct clk_ops oscvco_clk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= realview_oscvco_set,
-};
-
-static struct clk oscvco_clk = {
-	.ops	= &oscvco_clk_ops,
-	.params	= &realview_oscvco_params,
-};
-
-/*
- * These are fixed clocks.
- */
-static struct clk ref24_clk = {
-	.rate	= 24000000,
-};
-
-static struct clk sp804_clk = {
-	.rate	= 1000000,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
-	{	/* Bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {	/* UART0 */
-		.dev_id		= "dev:uart0",
-		.clk		= &ref24_clk,
-	}, {	/* UART1 */
-		.dev_id		= "dev:uart1",
-		.clk		= &ref24_clk,
-	}, {	/* UART2 */
-		.dev_id		= "dev:uart2",
-		.clk		= &ref24_clk,
-	}, {	/* UART3 */
-		.dev_id		= "fpga:uart3",
-		.clk		= &ref24_clk,
-	}, {	/* UART3 is on the dev chip in PB1176 */
-		.dev_id		= "dev:uart3",
-		.clk		= &ref24_clk,
-	}, {	/* UART4 only exists in PB1176 */
-		.dev_id		= "fpga:uart4",
-		.clk		= &ref24_clk,
-	}, {	/* KMI0 */
-		.dev_id		= "fpga:kmi0",
-		.clk		= &ref24_clk,
-	}, {	/* KMI1 */
-		.dev_id		= "fpga:kmi1",
-		.clk		= &ref24_clk,
-	}, {	/* MMC0 */
-		.dev_id		= "fpga:mmc0",
-		.clk		= &ref24_clk,
-	}, {	/* CLCD is in the PB1176 and EB DevChip */
-		.dev_id		= "dev:clcd",
-		.clk		= &oscvco_clk,
-	}, {	/* PB:CLCD */
-		.dev_id		= "issp:clcd",
-		.clk		= &oscvco_clk,
-	}, {	/* SSP */
-		.dev_id		= "dev:ssp0",
-		.clk		= &ref24_clk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.clk		= &sp804_clk,
-	},
-};
-
 void __init realview_init_early(void)
 {
 	void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
 
-	if (machine_is_realview_pb1176())
-		oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET;
-	else
-		oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET;
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
 	versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
 }
 
diff --git a/arch/arm/mach-realview/include/mach/clkdev.h b/arch/arm/mach-realview/include/mach/clkdev.h
deleted file mode 100644
index e58d0771b64e..000000000000
--- a/arch/arm/mach-realview/include/mach/clkdev.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <plat/clock.h>
-
-struct clk {
-	unsigned long		rate;
-	const struct clk_ops	*ops;
-	const struct icst_params *params;
-	void __iomem		*vcoreg;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index baf382c5e776..a33e33b76733 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -27,6 +27,7 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -414,6 +415,7 @@ static void __init realview_eb_timer_init(void)
 	else
 		timer_irq = IRQ_EB_TIMER0_1;
 
+	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
 	realview_timer_init(timer_irq);
 	realview_eb_twd_init();
 }
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index b1d7cafa1a6d..f0298cbc203e 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -29,6 +29,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -326,6 +327,7 @@ static void __init realview_pb1176_timer_init(void)
 	timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE);
 	timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20;
 
+	realview_clk_init(__io_address(REALVIEW_SYS_BASE), true);
 	realview_timer_init(IRQ_DC1176_TIMER0);
 }
 
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index a98c536e3327..1f019f76f7b5 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -27,6 +27,7 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -312,6 +313,7 @@ static void __init realview_pb11mp_timer_init(void)
 	timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
 	timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
 
+	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
 	realview_timer_init(IRQ_TC11MP_TIMER0_1);
 	realview_pb11mp_twd_init();
 }
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 59650174e6ed..5032775dbfee 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -27,6 +27,7 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -261,6 +262,7 @@ static void __init realview_pba8_timer_init(void)
 	timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
 	timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
 
+	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
 	realview_timer_init(IRQ_PBA8_TIMER0_1);
 }
 
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 3f2f605624e9..de64ba0ddb95 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -26,6 +26,7 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-realview.h>
 
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -320,6 +321,7 @@ static void __init realview_pbx_timer_init(void)
 	timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
 	timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
 
+	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
 	realview_timer_init(IRQ_PBX_TIMER0_1);
 	realview_pbx_twd_init();
 }