Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 419 insertions, 0 deletions

diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
new file mode 100644
index 000000000000..95ae217be1bc
--- /dev/null
+++ b/arch/arm/mach-sa1100/generic.c
@@ -0,0 +1,419 @@
+/*
+ * linux/arch/arm/mach-sa1100/generic.c
+ *
+ * Author: Nicolas Pitre
+ *
+ * Code common to all SA11x0 machines.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/cpufreq.h>
+#include <linux/ioport.h>
+
+#include <asm/div64.h>
+#include <asm/hardware.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+#include <asm/irq.h>
+
+#include "generic.h"
+
+#define NR_FREQS	16
+
+/*
+ * This table is setup for a 3.6864MHz Crystal.
+ */
+static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
+	 590,	/*  59.0 MHz */
+	 737,	/*  73.7 MHz */
+	 885, 	/*  88.5 MHz */
+	1032,	/* 103.2 MHz */
+	1180,	/* 118.0 MHz */
+	1327,	/* 132.7 MHz */
+	1475,	/* 147.5 MHz */
+	1622,	/* 162.2 MHz */
+	1769,	/* 176.9 MHz */
+	1917,	/* 191.7 MHz */
+	2064,	/* 206.4 MHz */
+	2212,	/* 221.2 MHz */
+	2359,   /* 235.9 MHz */
+	2507,   /* 250.7 MHz */
+	2654,   /* 265.4 MHz */
+	2802    /* 280.2 MHz */
+};
+
+#if defined(CONFIG_CPU_FREQ_SA1100) || defined(CONFIG_CPU_FREQ_SA1110)
+/* rounds up(!)  */
+unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
+{
+	int i;
+
+	khz /= 100;
+
+	for (i = 0; i < NR_FREQS; i++)
+		if (cclk_frequency_100khz[i] >= khz)
+			break;
+
+	return i;
+}
+
+unsigned int sa11x0_ppcr_to_freq(unsigned int idx)
+{
+	unsigned int freq = 0;
+	if (idx < NR_FREQS)
+		freq = cclk_frequency_100khz[idx] * 100;
+	return freq;
+}
+
+
+/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
+ * this platform, anyway.
+ */
+int sa11x0_verify_speed(struct cpufreq_policy *policy)
+{
+	unsigned int tmp;
+	if (policy->cpu)
+		return -EINVAL;
+
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
+
+	/* make sure that at least one frequency is within the policy */
+	tmp = cclk_frequency_100khz[sa11x0_freq_to_ppcr(policy->min)] * 100;
+	if (tmp > policy->max)
+		policy->max = tmp;
+
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
+
+	return 0;
+}
+
+unsigned int sa11x0_getspeed(unsigned int cpu)
+{
+	if (cpu)
+		return 0;
+	return cclk_frequency_100khz[PPCR & 0xf] * 100;
+}
+
+#else
+/*
+ * We still need to provide this so building without cpufreq works.
+ */ 
+unsigned int cpufreq_get(unsigned int cpu)
+{
+	return cclk_frequency_100khz[PPCR & 0xf] * 100;
+}
+EXPORT_SYMBOL(cpufreq_get);
+#endif
+
+/*
+ * This is the SA11x0 sched_clock implementation.  This has
+ * a resolution of 271ns, and a maximum value of 1165s.
+ *  ( * 1E9 / 3686400 => * 78125 / 288)
+ */
+unsigned long long sched_clock(void)
+{
+	unsigned long long v;
+
+	v = (unsigned long long)OSCR * 78125;
+	do_div(v, 288);
+
+	return v;
+}
+
+/*
+ * Default power-off for SA1100
+ */
+static void sa1100_power_off(void)
+{
+	mdelay(100);
+	local_irq_disable();
+	/* disable internal oscillator, float CS lines */
+	PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS);
+	/* enable wake-up on GPIO0 (Assabet...) */
+	PWER = GFER = GRER = 1;
+	/*
+	 * set scratchpad to zero, just in case it is used as a
+	 * restart address by the bootloader.
+	 */
+	PSPR = 0;
+	/* enter sleep mode */
+	PMCR = PMCR_SF;
+}
+
+static struct resource sa11x0udc_resources[] = {
+	[0] = {
+		.start	= 0x80000000,
+		.end	= 0x8000ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static u64 sa11x0udc_dma_mask = 0xffffffffUL;
+
+static struct platform_device sa11x0udc_device = {
+	.name		= "sa11x0-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &sa11x0udc_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(sa11x0udc_resources),
+	.resource	= sa11x0udc_resources,
+};
+
+static struct resource sa11x0uart1_resources[] = {
+	[0] = {
+		.start	= 0x80010000,
+		.end	= 0x8001ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sa11x0uart1_device = {
+	.name		= "sa11x0-uart",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(sa11x0uart1_resources),
+	.resource	= sa11x0uart1_resources,
+};
+
+static struct resource sa11x0uart3_resources[] = {
+	[0] = {
+		.start	= 0x80050000,
+		.end	= 0x8005ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sa11x0uart3_device = {
+	.name		= "sa11x0-uart",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(sa11x0uart3_resources),
+	.resource	= sa11x0uart3_resources,
+};
+
+static struct resource sa11x0mcp_resources[] = {
+	[0] = {
+		.start	= 0x80060000,
+		.end	= 0x8006ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static u64 sa11x0mcp_dma_mask = 0xffffffffUL;
+
+static struct platform_device sa11x0mcp_device = {
+	.name		= "sa11x0-mcp",
+	.id		= -1,
+	.dev = {
+		.dma_mask = &sa11x0mcp_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(sa11x0mcp_resources),
+	.resource	= sa11x0mcp_resources,
+};
+
+static struct resource sa11x0ssp_resources[] = {
+	[0] = {
+		.start	= 0x80070000,
+		.end	= 0x8007ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static u64 sa11x0ssp_dma_mask = 0xffffffffUL;
+
+static struct platform_device sa11x0ssp_device = {
+	.name		= "sa11x0-ssp",
+	.id		= -1,
+	.dev = {
+		.dma_mask = &sa11x0ssp_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(sa11x0ssp_resources),
+	.resource	= sa11x0ssp_resources,
+};
+
+static struct resource sa11x0fb_resources[] = {
+	[0] = {
+		.start	= 0xb0100000,
+		.end	= 0xb010ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_LCD,
+		.end	= IRQ_LCD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sa11x0fb_device = {
+	.name		= "sa11x0-fb",
+	.id		= -1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(sa11x0fb_resources),
+	.resource	= sa11x0fb_resources,
+};
+
+static struct platform_device sa11x0pcmcia_device = {
+	.name		= "sa11x0-pcmcia",
+	.id		= -1,
+};
+
+static struct platform_device sa11x0mtd_device = {
+	.name		= "flash",
+	.id		= -1,
+};
+
+void sa11x0_set_flash_data(struct flash_platform_data *flash,
+			   struct resource *res, int nr)
+{
+	sa11x0mtd_device.dev.platform_data = flash;
+	sa11x0mtd_device.resource = res;
+	sa11x0mtd_device.num_resources = nr;
+}
+
+static struct resource sa11x0ir_resources[] = {
+	{
+		.start	= __PREG(Ser2UTCR0),
+		.end	= __PREG(Ser2UTCR0) + 0x24 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= __PREG(Ser2HSCR0),
+		.end	= __PREG(Ser2HSCR0) + 0x1c - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= __PREG(Ser2HSCR2),
+		.end	= __PREG(Ser2HSCR2) + 0x04 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_Ser2ICP,
+		.end	= IRQ_Ser2ICP,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device sa11x0ir_device = {
+	.name		= "sa11x0-ir",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(sa11x0ir_resources),
+	.resource	= sa11x0ir_resources,
+};
+
+void sa11x0_set_irda_data(struct irda_platform_data *irda)
+{
+	sa11x0ir_device.dev.platform_data = irda;
+}
+
+static struct platform_device *sa11x0_devices[] __initdata = {
+	&sa11x0udc_device,
+	&sa11x0uart1_device,
+	&sa11x0uart3_device,
+	&sa11x0mcp_device,
+	&sa11x0ssp_device,
+	&sa11x0pcmcia_device,
+	&sa11x0fb_device,
+	&sa11x0mtd_device,
+};
+
+static int __init sa1100_init(void)
+{
+	pm_power_off = sa1100_power_off;
+
+	if (sa11x0ir_device.dev.platform_data)
+		platform_device_register(&sa11x0ir_device);
+
+	return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
+}
+
+arch_initcall(sa1100_init);
+
+void (*sa1100fb_backlight_power)(int on);
+void (*sa1100fb_lcd_power)(int on);
+
+EXPORT_SYMBOL(sa1100fb_backlight_power);
+EXPORT_SYMBOL(sa1100fb_lcd_power);
+
+
+/*
+ * Common I/O mapping:
+ *
+ * Typically, static virtual address mappings are as follow:
+ *
+ * 0xf0000000-0xf3ffffff:	miscellaneous stuff (CPLDs, etc.)
+ * 0xf4000000-0xf4ffffff:	SA-1111
+ * 0xf5000000-0xf5ffffff:	reserved (used by cache flushing area)
+ * 0xf6000000-0xfffeffff:	reserved (internal SA1100 IO defined above)
+ * 0xffff0000-0xffff0fff:	SA1100 exception vectors
+ * 0xffff2000-0xffff2fff:	Minicache copy_user_page area
+ *
+ * Below 0xe8000000 is reserved for vm allocation.
+ *
+ * The machine specific code must provide the extra mapping beside the
+ * default mapping provided here.
+ */
+
+static struct map_desc standard_io_desc[] __initdata = {
+ /* virtual     physical    length      type */
+  { 0xf8000000, 0x80000000, 0x00100000, MT_DEVICE }, /* PCM */
+  { 0xfa000000, 0x90000000, 0x00100000, MT_DEVICE }, /* SCM */
+  { 0xfc000000, 0xa0000000, 0x00100000, MT_DEVICE }, /* MER */
+  { 0xfe000000, 0xb0000000, 0x00200000, MT_DEVICE }  /* LCD + DMA */
+};
+
+void __init sa1100_map_io(void)
+{
+	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+}
+
+/*
+ * Disable the memory bus request/grant signals on the SA1110 to
+ * ensure that we don't receive spurious memory requests.  We set
+ * the MBGNT signal false to ensure the SA1111 doesn't own the
+ * SDRAM bus.
+ */
+void __init sa1110_mb_disable(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	
+	PGSR &= ~GPIO_MBGNT;
+	GPCR = GPIO_MBGNT;
+	GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
+
+	GAFR &= ~(GPIO_MBGNT | GPIO_MBREQ);
+
+	local_irq_restore(flags);
+}
+
+/*
+ * If the system is going to use the SA-1111 DMA engines, set up
+ * the memory bus request/grant pins.
+ */
+void __init sa1110_mb_enable(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	PGSR &= ~GPIO_MBGNT;
+	GPCR = GPIO_MBGNT;
+	GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
+
+	GAFR |= (GPIO_MBGNT | GPIO_MBREQ);
+	TUCR |= TUCR_MR;
+
+	local_irq_restore(flags);
+}
+