summaryrefslogtreecommitdiff
path: root/arch/arm/mach-sa1100/h3600.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/arm/mach-sa1100/h3600.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/arm/mach-sa1100/h3600.c')
-rw-r--r--arch/arm/mach-sa1100/h3600.c892
1 files changed, 892 insertions, 0 deletions
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
new file mode 100644
index 000000000000..9788d3aefa73
--- /dev/null
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -0,0 +1,892 @@
+/*
+ * Hardware definitions for Compaq iPAQ H3xxx Handheld Computers
+ *
+ * Copyright 2000,1 Compaq Computer Corporation.
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ *
+ * History:
+ *
+ * 2001-10-?? Andrew Christian Added support for iPAQ H3800
+ * and abstracted EGPIO interface.
+ *
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/serial_core.h>
+
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irda.h>
+#include <asm/mach/map.h>
+#include <asm/mach/serial_sa1100.h>
+
+#include <asm/arch/h3600.h>
+
+#if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
+#include <asm/arch/h3600_gpio.h>
+#endif
+
+#ifdef CONFIG_SA1100_H3800
+#include <asm/arch/h3600_asic.h>
+#endif
+
+#include "generic.h"
+
+struct ipaq_model_ops ipaq_model_ops;
+EXPORT_SYMBOL(ipaq_model_ops);
+
+static struct mtd_partition h3xxx_partitions[] = {
+ {
+ .name = "H3XXX boot firmware",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+#ifdef CONFIG_MTD_2PARTS_IPAQ
+ .name = "H3XXX root jffs2",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00040000,
+#else
+ .name = "H3XXX kernel",
+ .size = 0x00080000,
+ .offset = 0x00040000,
+ }, {
+ .name = "H3XXX params",
+ .size = 0x00040000,
+ .offset = 0x000C0000,
+ }, {
+#ifdef CONFIG_JFFS2_FS
+ .name = "H3XXX root jffs2",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00100000,
+#else
+ .name = "H3XXX initrd",
+ .size = 0x00100000,
+ .offset = 0x00100000,
+ }, {
+ .name = "H3XXX root cramfs",
+ .size = 0x00300000,
+ .offset = 0x00200000,
+ }, {
+ .name = "H3XXX usr cramfs",
+ .size = 0x00800000,
+ .offset = 0x00500000,
+ }, {
+ .name = "H3XXX usr local",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00d00000,
+#endif
+#endif
+ }
+};
+
+static void h3xxx_set_vpp(int vpp)
+{
+ assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, vpp);
+}
+
+static struct flash_platform_data h3xxx_flash_data = {
+ .map_name = "cfi_probe",
+ .set_vpp = h3xxx_set_vpp,
+ .parts = h3xxx_partitions,
+ .nr_parts = ARRAY_SIZE(h3xxx_partitions),
+};
+
+static struct resource h3xxx_flash_resource = {
+ .start = SA1100_CS0_PHYS,
+ .end = SA1100_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+/*
+ * This turns the IRDA power on or off on the Compaq H3600
+ */
+static int h3600_irda_set_power(struct device *dev, unsigned int state)
+{
+ assign_h3600_egpio( IPAQ_EGPIO_IR_ON, state );
+
+ return 0;
+}
+
+static void h3600_irda_set_speed(struct device *dev, int speed)
+{
+ if (speed < 4000000) {
+ clr_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
+ } else {
+ set_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
+ }
+}
+
+static struct irda_platform_data h3600_irda_data = {
+ .set_power = h3600_irda_set_power,
+ .set_speed = h3600_irda_set_speed,
+};
+
+static void h3xxx_mach_init(void)
+{
+ sa11x0_set_flash_data(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
+ sa11x0_set_irda_data(&h3600_irda_data);
+}
+
+/*
+ * low-level UART features
+ */
+
+static void h3600_uart_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+ if (port->mapbase == _Ser3UTCR0) {
+ if (mctrl & TIOCM_RTS)
+ GPCR = GPIO_H3600_COM_RTS;
+ else
+ GPSR = GPIO_H3600_COM_RTS;
+ }
+}
+
+static u_int h3600_uart_get_mctrl(struct uart_port *port)
+{
+ u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
+
+ if (port->mapbase == _Ser3UTCR0) {
+ int gplr = GPLR;
+ /* DCD and CTS bits are inverted in GPLR by RS232 transceiver */
+ if (gplr & GPIO_H3600_COM_DCD)
+ ret &= ~TIOCM_CD;
+ if (gplr & GPIO_H3600_COM_CTS)
+ ret &= ~TIOCM_CTS;
+ }
+
+ return ret;
+}
+
+static void h3600_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
+{
+ if (port->mapbase == _Ser2UTCR0) { /* TODO: REMOVE THIS */
+ assign_h3600_egpio(IPAQ_EGPIO_IR_ON, !state);
+ } else if (port->mapbase == _Ser3UTCR0) {
+ assign_h3600_egpio(IPAQ_EGPIO_RS232_ON, !state);
+ }
+}
+
+/*
+ * Enable/Disable wake up events for this serial port.
+ * Obviously, we only support this on the normal COM port.
+ */
+static int h3600_uart_set_wake(struct uart_port *port, u_int enable)
+{
+ int err = -EINVAL;
+
+ if (port->mapbase == _Ser3UTCR0) {
+ if (enable)
+ PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
+ else
+ PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
+ err = 0;
+ }
+ return err;
+}
+
+static struct sa1100_port_fns h3600_port_fns __initdata = {
+ .set_mctrl = h3600_uart_set_mctrl,
+ .get_mctrl = h3600_uart_get_mctrl,
+ .pm = h3600_uart_pm,
+ .set_wake = h3600_uart_set_wake,
+};
+
+/*
+ * helper for sa1100fb
+ */
+static void h3xxx_lcd_power(int enable)
+{
+ assign_h3600_egpio(IPAQ_EGPIO_LCD_POWER, enable);
+}
+
+static struct map_desc h3600_io_desc[] __initdata = {
+ /* virtual physical length type */
+ { H3600_BANK_2_VIRT, SA1100_CS2_PHYS, 0x02800000, MT_DEVICE }, /* static memory bank 2 CS#2 */
+ { H3600_BANK_4_VIRT, SA1100_CS4_PHYS, 0x00800000, MT_DEVICE }, /* static memory bank 4 CS#4 */
+ { H3600_EGPIO_VIRT, H3600_EGPIO_PHYS, 0x01000000, MT_DEVICE }, /* EGPIO 0 CS#5 */
+};
+
+/*
+ * Common map_io initialization
+ */
+
+static void __init h3xxx_map_io(void)
+{
+ sa1100_map_io();
+ iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
+
+ sa1100_register_uart_fns(&h3600_port_fns);
+ sa1100_register_uart(0, 3); /* Common serial port */
+// sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
+
+ /* Ensure those pins are outputs and driving low */
+ PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+ PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
+ /* Configure suspend conditions */
+ PGSR = 0;
+ PWER = PWER_GPIO0 | PWER_RTC;
+ PCFR = PCFR_OPDE;
+ PSDR = 0;
+
+ sa1100fb_lcd_power = h3xxx_lcd_power;
+}
+
+static __inline__ void do_blank(int setp)
+{
+ if (ipaq_model_ops.blank_callback)
+ ipaq_model_ops.blank_callback(1-setp);
+}
+
+/************************* H3100 *************************/
+
+#ifdef CONFIG_SA1100_H3100
+
+#define H3100_EGPIO (*(volatile unsigned int *)H3600_EGPIO_VIRT)
+static unsigned int h3100_egpio = 0;
+
+static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
+{
+ unsigned int egpio = 0;
+ long gpio = 0;
+ unsigned long flags;
+
+ switch (x) {
+ case IPAQ_EGPIO_LCD_POWER:
+ egpio |= EGPIO_H3600_LCD_ON;
+ gpio |= GPIO_H3100_LCD_3V_ON;
+ do_blank(setp);
+ break;
+ case IPAQ_EGPIO_LCD_ENABLE:
+ break;
+ case IPAQ_EGPIO_CODEC_NRESET:
+ egpio |= EGPIO_H3600_CODEC_NRESET;
+ break;
+ case IPAQ_EGPIO_AUDIO_ON:
+ gpio |= GPIO_H3100_AUD_PWR_ON
+ | GPIO_H3100_AUD_ON;
+ break;
+ case IPAQ_EGPIO_QMUTE:
+ gpio |= GPIO_H3100_QMUTE;
+ break;
+ case IPAQ_EGPIO_OPT_NVRAM_ON:
+ egpio |= EGPIO_H3600_OPT_NVRAM_ON;
+ break;
+ case IPAQ_EGPIO_OPT_ON:
+ egpio |= EGPIO_H3600_OPT_ON;
+ break;
+ case IPAQ_EGPIO_CARD_RESET:
+ egpio |= EGPIO_H3600_CARD_RESET;
+ break;
+ case IPAQ_EGPIO_OPT_RESET:
+ egpio |= EGPIO_H3600_OPT_RESET;
+ break;
+ case IPAQ_EGPIO_IR_ON:
+ gpio |= GPIO_H3100_IR_ON;
+ break;
+ case IPAQ_EGPIO_IR_FSEL:
+ gpio |= GPIO_H3100_IR_FSEL;
+ break;
+ case IPAQ_EGPIO_RS232_ON:
+ egpio |= EGPIO_H3600_RS232_ON;
+ break;
+ case IPAQ_EGPIO_VPP_ON:
+ egpio |= EGPIO_H3600_VPP_ON;
+ break;
+ }
+
+ if (egpio || gpio) {
+ local_irq_save(flags);
+ if (setp) {
+ h3100_egpio |= egpio;
+ GPSR = gpio;
+ } else {
+ h3100_egpio &= ~egpio;
+ GPCR = gpio;
+ }
+ H3100_EGPIO = h3100_egpio;
+ local_irq_restore(flags);
+ }
+}
+
+static unsigned long h3100_read_egpio(void)
+{
+ return h3100_egpio;
+}
+
+static int h3100_pm_callback(int req)
+{
+ if (ipaq_model_ops.pm_callback_aux)
+ return ipaq_model_ops.pm_callback_aux(req);
+ return 0;
+}
+
+static struct ipaq_model_ops h3100_model_ops __initdata = {
+ .generic_name = "3100",
+ .control = h3100_control_egpio,
+ .read = h3100_read_egpio,
+ .pm_callback = h3100_pm_callback
+};
+
+#define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON \
+ | GPIO_H3100_GPIO3 \
+ | GPIO_H3100_QMUTE \
+ | GPIO_H3100_LCD_3V_ON \
+ | GPIO_H3100_AUD_ON \
+ | GPIO_H3100_AUD_PWR_ON \
+ | GPIO_H3100_IR_ON \
+ | GPIO_H3100_IR_FSEL)
+
+static void __init h3100_map_io(void)
+{
+ h3xxx_map_io();
+
+ /* Initialize h3100-specific values here */
+ GPCR = 0x0fffffff; /* All outputs are set low by default */
+ GPDR = GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
+ GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
+ GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
+ H3100_DIRECT_EGPIO;
+
+ /* Older bootldrs put GPIO2-9 in alternate mode on the
+ assumption that they are used for video */
+ GAFR &= ~H3100_DIRECT_EGPIO;
+
+ H3100_EGPIO = h3100_egpio;
+ ipaq_model_ops = h3100_model_ops;
+}
+
+MACHINE_START(H3100, "Compaq iPAQ H3100")
+ BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
+ BOOT_PARAMS(0xc0000100)
+ MAPIO(h3100_map_io)
+ INITIRQ(sa1100_init_irq)
+ .timer = &sa1100_timer,
+ .init_machine = h3xxx_mach_init,
+MACHINE_END
+
+#endif /* CONFIG_SA1100_H3100 */
+
+/************************* H3600 *************************/
+
+#ifdef CONFIG_SA1100_H3600
+
+#define H3600_EGPIO (*(volatile unsigned int *)H3600_EGPIO_VIRT)
+static unsigned int h3600_egpio = EGPIO_H3600_RS232_ON;
+
+static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
+{
+ unsigned int egpio = 0;
+ unsigned long flags;
+
+ switch (x) {
+ case IPAQ_EGPIO_LCD_POWER:
+ egpio |= EGPIO_H3600_LCD_ON |
+ EGPIO_H3600_LCD_PCI |
+ EGPIO_H3600_LCD_5V_ON |
+ EGPIO_H3600_LVDD_ON;
+ do_blank(setp);
+ break;
+ case IPAQ_EGPIO_LCD_ENABLE:
+ break;
+ case IPAQ_EGPIO_CODEC_NRESET:
+ egpio |= EGPIO_H3600_CODEC_NRESET;
+ break;
+ case IPAQ_EGPIO_AUDIO_ON:
+ egpio |= EGPIO_H3600_AUD_AMP_ON |
+ EGPIO_H3600_AUD_PWR_ON;
+ break;
+ case IPAQ_EGPIO_QMUTE:
+ egpio |= EGPIO_H3600_QMUTE;
+ break;
+ case IPAQ_EGPIO_OPT_NVRAM_ON:
+ egpio |= EGPIO_H3600_OPT_NVRAM_ON;
+ break;
+ case IPAQ_EGPIO_OPT_ON:
+ egpio |= EGPIO_H3600_OPT_ON;
+ break;
+ case IPAQ_EGPIO_CARD_RESET:
+ egpio |= EGPIO_H3600_CARD_RESET;
+ break;
+ case IPAQ_EGPIO_OPT_RESET:
+ egpio |= EGPIO_H3600_OPT_RESET;
+ break;
+ case IPAQ_EGPIO_IR_ON:
+ egpio |= EGPIO_H3600_IR_ON;
+ break;
+ case IPAQ_EGPIO_IR_FSEL:
+ egpio |= EGPIO_H3600_IR_FSEL;
+ break;
+ case IPAQ_EGPIO_RS232_ON:
+ egpio |= EGPIO_H3600_RS232_ON;
+ break;
+ case IPAQ_EGPIO_VPP_ON:
+ egpio |= EGPIO_H3600_VPP_ON;
+ break;
+ }
+
+ if (egpio) {
+ local_irq_save(flags);
+ if (setp)
+ h3600_egpio |= egpio;
+ else
+ h3600_egpio &= ~egpio;
+ H3600_EGPIO = h3600_egpio;
+ local_irq_restore(flags);
+ }
+}
+
+static unsigned long h3600_read_egpio(void)
+{
+ return h3600_egpio;
+}
+
+static int h3600_pm_callback(int req)
+{
+ if (ipaq_model_ops.pm_callback_aux)
+ return ipaq_model_ops.pm_callback_aux(req);
+ return 0;
+}
+
+static struct ipaq_model_ops h3600_model_ops __initdata = {
+ .generic_name = "3600",
+ .control = h3600_control_egpio,
+ .read = h3600_read_egpio,
+ .pm_callback = h3600_pm_callback
+};
+
+static void __init h3600_map_io(void)
+{
+ h3xxx_map_io();
+
+ /* Initialize h3600-specific values here */
+
+ GPCR = 0x0fffffff; /* All outputs are set low by default */
+ GPDR = GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
+ GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
+ GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
+ GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
+ GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
+
+ H3600_EGPIO = h3600_egpio; /* Maintains across sleep? */
+ ipaq_model_ops = h3600_model_ops;
+}
+
+MACHINE_START(H3600, "Compaq iPAQ H3600")
+ BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
+ BOOT_PARAMS(0xc0000100)
+ MAPIO(h3600_map_io)
+ INITIRQ(sa1100_init_irq)
+ .timer = &sa1100_timer,
+ .init_machine = h3xxx_mach_init,
+MACHINE_END
+
+#endif /* CONFIG_SA1100_H3600 */
+
+#ifdef CONFIG_SA1100_H3800
+
+#define SET_ASIC1(x) \
+ do {if (setp) { H3800_ASIC1_GPIO_OUT |= (x); } else { H3800_ASIC1_GPIO_OUT &= ~(x); }} while(0)
+
+#define SET_ASIC2(x) \
+ do {if (setp) { H3800_ASIC2_GPIOPIOD |= (x); } else { H3800_ASIC2_GPIOPIOD &= ~(x); }} while(0)
+
+#define CLEAR_ASIC1(x) \
+ do {if (setp) { H3800_ASIC1_GPIO_OUT &= ~(x); } else { H3800_ASIC1_GPIO_OUT |= (x); }} while(0)
+
+#define CLEAR_ASIC2(x) \
+ do {if (setp) { H3800_ASIC2_GPIOPIOD &= ~(x); } else { H3800_ASIC2_GPIOPIOD |= (x); }} while(0)
+
+
+/*
+ On screen enable, we get
+
+ h3800_video_power_on(1)
+ LCD controller starts
+ h3800_video_lcd_enable(1)
+
+ On screen disable, we get
+
+ h3800_video_lcd_enable(0)
+ LCD controller stops
+ h3800_video_power_on(0)
+*/
+
+
+static void h3800_video_power_on(int setp)
+{
+ if (setp) {
+ H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_ON;
+ msleep(30);
+ H3800_ASIC1_GPIO_OUT |= GPIO1_VGL_ON;
+ msleep(5);
+ H3800_ASIC1_GPIO_OUT |= GPIO1_VGH_ON;
+ msleep(50);
+ H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_5V_ON;
+ msleep(5);
+ } else {
+ msleep(5);
+ H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_5V_ON;
+ msleep(50);
+ H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGL_ON;
+ msleep(5);
+ H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGH_ON;
+ msleep(100);
+ H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_ON;
+ }
+}
+
+static void h3800_video_lcd_enable(int setp)
+{
+ if (setp) {
+ msleep(17); // Wait one from before turning on
+ H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_PCI;
+ } else {
+ H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_PCI;
+ msleep(30); // Wait before turning off
+ }
+}
+
+
+static void h3800_control_egpio(enum ipaq_egpio_type x, int setp)
+{
+ switch (x) {
+ case IPAQ_EGPIO_LCD_POWER:
+ h3800_video_power_on(setp);
+ break;
+ case IPAQ_EGPIO_LCD_ENABLE:
+ h3800_video_lcd_enable(setp);
+ break;
+ case IPAQ_EGPIO_CODEC_NRESET:
+ case IPAQ_EGPIO_AUDIO_ON:
+ case IPAQ_EGPIO_QMUTE:
+ printk("%s: error - should not be called\n", __FUNCTION__);
+ break;
+ case IPAQ_EGPIO_OPT_NVRAM_ON:
+ SET_ASIC2(GPIO2_OPT_ON_NVRAM);
+ break;
+ case IPAQ_EGPIO_OPT_ON:
+ SET_ASIC2(GPIO2_OPT_ON);
+ break;
+ case IPAQ_EGPIO_CARD_RESET:
+ SET_ASIC2(GPIO2_OPT_PCM_RESET);
+ break;
+ case IPAQ_EGPIO_OPT_RESET:
+ SET_ASIC2(GPIO2_OPT_RESET);
+ break;
+ case IPAQ_EGPIO_IR_ON:
+ CLEAR_ASIC1(GPIO1_IR_ON_N);
+ break;
+ case IPAQ_EGPIO_IR_FSEL:
+ break;
+ case IPAQ_EGPIO_RS232_ON:
+ SET_ASIC1(GPIO1_RS232_ON);
+ break;
+ case IPAQ_EGPIO_VPP_ON:
+ H3800_ASIC2_FlashWP_VPP_ON = setp;
+ break;
+ }
+}
+
+static unsigned long h3800_read_egpio(void)
+{
+ return H3800_ASIC1_GPIO_OUT | (H3800_ASIC2_GPIOPIOD << 16);
+}
+
+/* We need to fix ASIC2 GPIO over suspend/resume. At the moment,
+ it doesn't appear that ASIC1 GPIO has the same problem */
+
+static int h3800_pm_callback(int req)
+{
+ static u16 asic1_data;
+ static u16 asic2_data;
+ int result = 0;
+
+ printk("%s %d\n", __FUNCTION__, req);
+
+ switch (req) {
+ case PM_RESUME:
+ MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000; /* Set MSC2 correctly */
+
+ H3800_ASIC2_GPIOPIOD = asic2_data;
+ H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
+ | GPIO2_SD_DETECT
+ | GPIO2_EAR_IN_N
+ | GPIO2_USB_DETECT_N
+ | GPIO2_SD_CON_SLT;
+
+ H3800_ASIC1_GPIO_OUT = asic1_data;
+
+ if (ipaq_model_ops.pm_callback_aux)
+ result = ipaq_model_ops.pm_callback_aux(req);
+ break;
+
+ case PM_SUSPEND:
+ if (ipaq_model_ops.pm_callback_aux &&
+ ((result = ipaq_model_ops.pm_callback_aux(req)) != 0))
+ return result;
+
+ asic1_data = H3800_ASIC1_GPIO_OUT;
+ asic2_data = H3800_ASIC2_GPIOPIOD;
+ break;
+ default:
+ printk("%s: unrecognized PM callback\n", __FUNCTION__);
+ break;
+ }
+ return result;
+}
+
+static struct ipaq_model_ops h3800_model_ops __initdata = {
+ .generic_name = "3800",
+ .control = h3800_control_egpio,
+ .read = h3800_read_egpio,
+ .pm_callback = h3800_pm_callback
+};
+
+#define MAX_ASIC_ISR_LOOPS 20
+
+/* The order of these is important - see #include <asm/arch/irqs.h> */
+static u32 kpio_irq_mask[] = {
+ KPIO_KEY_ALL,
+ KPIO_SPI_INT,
+ KPIO_OWM_INT,
+ KPIO_ADC_INT,
+ KPIO_UART_0_INT,
+ KPIO_UART_1_INT,
+ KPIO_TIMER_0_INT,
+ KPIO_TIMER_1_INT,
+ KPIO_TIMER_2_INT
+};
+
+static u32 gpio_irq_mask[] = {
+ GPIO2_PEN_IRQ,
+ GPIO2_SD_DETECT,
+ GPIO2_EAR_IN_N,
+ GPIO2_USB_DETECT_N,
+ GPIO2_SD_CON_SLT,
+};
+
+static void h3800_IRQ_demux(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+ int i;
+
+ if (0) printk("%s: interrupt received\n", __FUNCTION__);
+
+ desc->chip->ack(irq);
+
+ for (i = 0; i < MAX_ASIC_ISR_LOOPS && (GPLR & GPIO_H3800_ASIC); i++) {
+ u32 irq;
+ int j;
+
+ /* KPIO */
+ irq = H3800_ASIC2_KPIINTFLAG;
+ if (0) printk("%s KPIO 0x%08X\n", __FUNCTION__, irq);
+ for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
+ if (irq & kpio_irq_mask[j])
+ do_edge_IRQ(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j, regs);
+
+ /* GPIO2 */
+ irq = H3800_ASIC2_GPIINTFLAG;
+ if (0) printk("%s GPIO 0x%08X\n", __FUNCTION__, irq);
+ for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
+ if (irq & gpio_irq_mask[j])
+ do_edge_IRQ(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j , regs);
+ }
+
+ if (i >= MAX_ASIC_ISR_LOOPS)
+ printk("%s: interrupt processing overrun\n", __FUNCTION__);
+
+ /* For level-based interrupts */
+ desc->chip->unmask(irq);
+
+}
+
+static struct irqaction h3800_irq = {
+ .name = "h3800_asic",
+ .handler = h3800_IRQ_demux,
+ .flags = SA_INTERRUPT,
+};
+
+u32 kpio_int_shadow = 0;
+
+
+/* mask_ack <- IRQ is first serviced.
+ mask <- IRQ is disabled.
+ unmask <- IRQ is enabled
+
+ The INTCLR registers are poorly documented. I believe that writing
+ a "1" to the register clears the specific interrupt, but the documentation
+ indicates writing a "0" clears the interrupt. In any case, they shouldn't
+ be read (that's the INTFLAG register)
+ */
+
+static void h3800_mask_ack_kpio_irq(unsigned int irq)
+{
+ u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
+ kpio_int_shadow &= ~mask;
+ H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
+ H3800_ASIC2_KPIINTCLR = mask;
+}
+
+static void h3800_mask_kpio_irq(unsigned int irq)
+{
+ u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
+ kpio_int_shadow &= ~mask;
+ H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
+}
+
+static void h3800_unmask_kpio_irq(unsigned int irq)
+{
+ u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
+ kpio_int_shadow |= mask;
+ H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
+}
+
+static void h3800_mask_ack_gpio_irq(unsigned int irq)
+{
+ u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
+ H3800_ASIC2_GPIINTSTAT &= ~mask;
+ H3800_ASIC2_GPIINTCLR = mask;
+}
+
+static void h3800_mask_gpio_irq(unsigned int irq)
+{
+ u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
+ H3800_ASIC2_GPIINTSTAT &= ~mask;
+ }
+
+static void h3800_unmask_gpio_irq(unsigned int irq)
+{
+ u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
+ H3800_ASIC2_GPIINTSTAT |= mask;
+}
+
+static void __init h3800_init_irq(void)
+{
+ int i;
+
+ /* Initialize standard IRQs */
+ sa1100_init_irq();
+
+ /* Disable all IRQs and set up clock */
+ H3800_ASIC2_KPIINTSTAT = 0; /* Disable all interrupts */
+ H3800_ASIC2_GPIINTSTAT = 0;
+
+ H3800_ASIC2_KPIINTCLR = 0; /* Clear all KPIO interrupts */
+ H3800_ASIC2_GPIINTCLR = 0; /* Clear all GPIO interrupts */
+
+// H3800_ASIC2_KPIINTCLR = 0xffff; /* Clear all KPIO interrupts */
+// H3800_ASIC2_GPIINTCLR = 0xffff; /* Clear all GPIO interrupts */
+
+ H3800_ASIC2_CLOCK_Enable |= ASIC2_CLOCK_EX0; /* 32 kHZ crystal on */
+ H3800_ASIC2_INTR_ClockPrescale |= ASIC2_INTCPS_SET;
+ H3800_ASIC2_INTR_ClockPrescale = ASIC2_INTCPS_CPS(0x0e) | ASIC2_INTCPS_SET;
+ H3800_ASIC2_INTR_TimerSet = 1;
+
+#if 0
+ for (i = 0; i < H3800_KPIO_IRQ_COUNT; i++) {
+ int irq = i + H3800_KPIO_IRQ_START;
+ irq_desc[irq].valid = 1;
+ irq_desc[irq].probe_ok = 1;
+ set_irq_chip(irq, &h3800_kpio_irqchip);
+ }
+
+ for (i = 0; i < H3800_GPIO_IRQ_COUNT; i++) {
+ int irq = i + H3800_GPIO_IRQ_START;
+ irq_desc[irq].valid = 1;
+ irq_desc[irq].probe_ok = 1;
+ set_irq_chip(irq, &h3800_gpio_irqchip);
+ }
+#endif
+ set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING);
+ set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, &h3800_IRQ_demux);
+}
+
+
+#define ASIC1_OUTPUTS 0x7fff /* First 15 bits are used */
+
+static void __init h3800_map_io(void)
+{
+ h3xxx_map_io();
+
+ /* Add wakeup on AC plug/unplug */
+ PWER |= PWER_GPIO12;
+
+ /* Initialize h3800-specific values here */
+ GPCR = 0x0fffffff; /* All outputs are set low by default */
+ GAFR = GPIO_H3800_CLK_OUT |
+ GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
+ GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
+ GPDR = GPIO_H3800_CLK_OUT |
+ GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
+ GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
+ GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
+ GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
+ TUCR = TUCR_3_6864MHz; /* Seems to be used only for the Bluetooth UART */
+
+ /* Fix the memory bus */
+ MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000;
+
+ /* Set up ASIC #1 */
+ H3800_ASIC1_GPIO_DIR = ASIC1_OUTPUTS; /* All outputs */
+ H3800_ASIC1_GPIO_MASK = ASIC1_OUTPUTS; /* No interrupts */
+ H3800_ASIC1_GPIO_SLEEP_MASK = ASIC1_OUTPUTS;
+ H3800_ASIC1_GPIO_SLEEP_DIR = ASIC1_OUTPUTS;
+ H3800_ASIC1_GPIO_SLEEP_OUT = GPIO1_EAR_ON_N;
+ H3800_ASIC1_GPIO_BATT_FAULT_DIR = ASIC1_OUTPUTS;
+ H3800_ASIC1_GPIO_BATT_FAULT_OUT = GPIO1_EAR_ON_N;
+
+ H3800_ASIC1_GPIO_OUT = GPIO1_IR_ON_N
+ | GPIO1_RS232_ON
+ | GPIO1_EAR_ON_N;
+
+ /* Set up ASIC #2 */
+ H3800_ASIC2_GPIOPIOD = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
+ H3800_ASIC2_GPOBFSTAT = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
+
+ H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
+ | GPIO2_SD_DETECT
+ | GPIO2_EAR_IN_N
+ | GPIO2_USB_DETECT_N
+ | GPIO2_SD_CON_SLT;
+
+ /* TODO : Set sleep states & battery fault states */
+
+ /* Clear VPP Enable */
+ H3800_ASIC2_FlashWP_VPP_ON = 0;
+ ipaq_model_ops = h3800_model_ops;
+}
+
+MACHINE_START(H3800, "Compaq iPAQ H3800")
+ BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
+ BOOT_PARAMS(0xc0000100)
+ MAPIO(h3800_map_io)
+ INITIRQ(h3800_init_irq)
+ .timer = &sa1100_timer,
+ .init_machine = h3xxx_mach_init,
+MACHINE_END
+
+#endif /* CONFIG_SA1100_H3800 */