Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "In this set, we have:
   - Refactoring of some of the old StrongARM-1100 GPIO code to make
     things simpler by Dmitry Eremin-Solenikov
   - Read-only and non-executable support for modules on ARM from Laura
     Abbot
   - Removal of unnecessary set_drvdata() calls in AMBA code
   - Some non-executable support for kernel lowmem mappings at the 1MB
     section granularity, and dumping of kernel page tables via debugfs
   - Some improvements for the timer/clock code on Footbridge platforms,
     and cleanup some of the LED code there
   - Fix fls/ffs() signatures to match x86 to prevent build warnings,
     particularly where these are used with min/max() macros
   - Avoid using the bootmem allocator on ARM (patches from Santosh
     Shilimkar)
   - Various asid/unaligned access updates from Will Deacon"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (51 commits)
  ARM: SMP implementations are not supposed to return from smp_ops.cpu_die()
  ARM: ignore memory below PHYS_OFFSET
  Fix select-induced Kconfig warning for ZBOOT_ROM
  ARM: fix ffs/fls implementations to match x86
  ARM: 7935/1: sa1100: collie: add gpio-keys configuration
  ARM: 7932/1: bcm: Add DEBUG_LL console support
  ARM: 7929/1: Remove duplicate SCHED_HRTICK config option
  ARM: 7928/1: kconfig: select HAVE_EFFICIENT_UNALIGNED_ACCESS for CPUv6+ && MMU
  ARM: 7927/1: dcache: select DCACHE_WORD_ACCESS for big-endian CPUs
  ARM: 7926/1: mm: flesh out and fix the comments in the ASID allocator
  ARM: 7925/1: mm: keep track of last ASID allocation to improve bitmap searching
  ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE
  ARM: PCI: add legacy IDE IRQ implementation
  ARM: footbridge: cleanup LEDs code
  ARM: pgd allocation: retry on failure
  ARM: footbridge: add one-shot mode for DC21285 timer
  ARM: footbridge: add sched_clock implementation
  ARM: 7922/1: l2x0: add Marvell Tauros3 support
  ARM: 7877/1: use built-in byte swap function
  ARM: 7921/1: mcpm: remove redundant dsb instructions prior to sev
  ...

1 files changed, 33 insertions, 41 deletions

diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index b8dc5bd22623..a663e7230141 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -28,35 +28,39 @@
 /*
  * helper for sa1100fb
  */
+static struct gpio h3600_lcd_gpio[] = {
+	{ H3XXX_EGPIO_LCD_ON,	GPIOF_OUT_INIT_LOW,	"LCD power" },
+	{ H3600_EGPIO_LCD_PCI,	GPIOF_OUT_INIT_LOW,	"LCD control" },
+	{ H3600_EGPIO_LCD_5V_ON, GPIOF_OUT_INIT_LOW,	"LCD 5v" },
+	{ H3600_EGPIO_LVDD_ON,	GPIOF_OUT_INIT_LOW,	"LCD 9v/-6.5v" },
+};
+
+static bool h3600_lcd_request(void)
+{
+	static bool h3600_lcd_ok;
+	int rc;
+
+	if (h3600_lcd_ok)
+		return true;
+
+	rc = gpio_request_array(h3600_lcd_gpio, ARRAY_SIZE(h3600_lcd_gpio));
+	if (rc)
+		pr_err("%s: can't request GPIOs\n", __func__);
+	else
+		h3600_lcd_ok = true;
+
+	return h3600_lcd_ok;
+}
+
 static void h3600_lcd_power(int enable)
 {
-	if (gpio_request(H3XXX_EGPIO_LCD_ON, "LCD power")) {
-		pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
-		goto err1;
-	}
-	if (gpio_request(H3600_EGPIO_LCD_PCI, "LCD control")) {
-		pr_err("%s: can't request H3XXX_EGPIO_LCD_PCI\n", __func__);
-		goto err2;
-	}
-	if (gpio_request(H3600_EGPIO_LCD_5V_ON, "LCD 5v")) {
-		pr_err("%s: can't request H3XXX_EGPIO_LCD_5V_ON\n", __func__);
-		goto err3;
-	}
-	if (gpio_request(H3600_EGPIO_LVDD_ON, "LCD 9v/-6.5v")) {
-		pr_err("%s: can't request H3600_EGPIO_LVDD_ON\n", __func__);
-		goto err4;
-	}
+	if (!h3600_lcd_request())
+		return;
 
 	gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
 	gpio_direction_output(H3600_EGPIO_LCD_PCI, enable);
 	gpio_direction_output(H3600_EGPIO_LCD_5V_ON, enable);
 	gpio_direction_output(H3600_EGPIO_LVDD_ON, enable);
-
-	gpio_free(H3600_EGPIO_LVDD_ON);
-err4:	gpio_free(H3600_EGPIO_LCD_5V_ON);
-err3:	gpio_free(H3600_EGPIO_LCD_PCI);
-err2:	gpio_free(H3XXX_EGPIO_LCD_ON);
-err1:	return;
 }
 
 static const struct sa1100fb_rgb h3600_rgb_16 = {
@@ -93,6 +97,11 @@ static void __init h3600_map_io(void)
 /*
  * This turns the IRDA power on or off on the Compaq H3600
  */
+static struct gpio h3600_irda_gpio[] = {
+	{ H3600_EGPIO_IR_ON,	GPIOF_OUT_INIT_LOW, "IrDA power" },
+	{ H3600_EGPIO_IR_FSEL,	GPIOF_OUT_INIT_LOW, "IrDA fsel" },
+};
+
 static int h3600_irda_set_power(struct device *dev, unsigned int state)
 {
 	gpio_set_value(H3600_EGPIO_IR_ON, state);
@@ -106,29 +115,12 @@ static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
 
 static int h3600_irda_startup(struct device *dev)
 {
-	int err = gpio_request(H3600_EGPIO_IR_ON, "IrDA power");
-	if (err)
-		goto err1;
-	err = gpio_direction_output(H3600_EGPIO_IR_ON, 0);
-	if (err)
-		goto err2;
-	err = gpio_request(H3600_EGPIO_IR_FSEL, "IrDA fsel");
-	if (err)
-		goto err2;
-	err = gpio_direction_output(H3600_EGPIO_IR_FSEL, 0);
-	if (err)
-		goto err3;
-	return 0;
-
-err3:	gpio_free(H3600_EGPIO_IR_FSEL);
-err2:	gpio_free(H3600_EGPIO_IR_ON);
-err1:	return err;
+	return gpio_request_array(h3600_irda_gpio, sizeof(h3600_irda_gpio));
 }
 
 static void h3600_irda_shutdown(struct device *dev)
 {
-	gpio_free(H3600_EGPIO_IR_ON);
-	gpio_free(H3600_EGPIO_IR_FSEL);
+	return gpio_free_array(h3600_irda_gpio, sizeof(h3600_irda_gpio));
 }
 
 static struct irda_platform_data h3600_irda_data = {