Merge tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates (part 2) from Arnd Bergmann:
 "These patches are all for Renesas shmobile, and depend on the earlier
  pinctrl updates.  Remarkably, this adds support for three new SoCs:
  r8a73a4, r8a73a4 and r8a7778.  The bulk of the code added for these is
  for pinctrl (using the new subsystem) and for clocks (not yet using
  the common clock subsystem).  The latter will have to get converted in
  one of the upcoming releases, but shmobile is not ready for that yet.

  The series also contains Renesas shmobile board changes, adding one
  board file for each of the three new SoCs.  These boards are using a
  mix of classic and device-tree based probing, as there is still a lot
  of infrastructure in shmobile that has not been converted to DT yet.
  Once those are resolved to the degree that no board specific setup
  code is needed, they can get folded into the respective SoC setup files."

* tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits)
  ARM: shmobile: use r8a7790 timer setup code on Lager
  ARM: shmobile: force enable of r8a7790 arch timer
  ARM: shmobile: Add second I/O range for r8a7790 PFC
  ARM: shmobile: bockw: enable network settings on bootargs
  ARM: shmobile: bockw: add SMSC ethernet support
  ARM: shmobile: R8A7778: add Ether support
  ARM: shmobile: bockw: enable SMSC ethernet on defconfig
  ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin()
  ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO()
  ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection
  ARM: shmobile: mackerel: add interrupt names for SDHI0
  ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio
  ARM: shmobile: mackerel: remove OCR masks, where regulators are used
  ARM: shmobile: mackerel: SDHI resources do not have to be numbered
  ARM: shmobile: Initial r8a7790 Lager board support
  ARM: shmobile: APE6EVM LAN9220 support
  ARM: shmobile: APE6EVM PFC support
  ARM: shmobile: APE6EVM base support
  ARM: shmobile: kzm9g-reference: add ethernet support
  ARM: shmobile: add R-Car M1A Bock-W platform support
  ...

1 files changed, 8 insertions, 42 deletions

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 45d21fe317f4..7e105932c09d 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -21,6 +21,7 @@
 #include <linux/io.h>
 #include <linux/sh_clk.h>
 #include <linux/clkdev.h>
+#include <mach/clock.h>
 #include <mach/common.h>
 
 /* SH7372 registers */
@@ -83,39 +84,12 @@ struct clk sh7372_extal2_clk = {
 	.rate		= 48000000,
 };
 
-/* A fixed divide-by-2 block */
-static unsigned long div2_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 2;
-}
-
-static struct sh_clk_ops div2_clk_ops = {
-	.recalc		= div2_recalc,
-};
+SH_CLK_RATIO(div2, 1, 2);
 
-/* Divide dv_clki by two */
-struct clk sh7372_dv_clki_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh7372_dv_clki_clk,
-};
-
-/* Divide extal1 by two */
-static struct clk extal1_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh7372_extal1_clk,
-};
-
-/* Divide extal2 by two */
-static struct clk extal2_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh7372_extal2_clk,
-};
-
-/* Divide extal2 by four */
-static struct clk extal2_div4_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &extal2_div2_clk,
-};
+SH_FIXED_RATIO_CLKg(sh7372_dv_clki_div2_clk,	sh7372_dv_clki_clk,	div2);
+SH_FIXED_RATIO_CLK(extal1_div2_clk,		sh7372_extal1_clk,	div2);
+SH_FIXED_RATIO_CLK(extal2_div2_clk,		sh7372_extal2_clk,	div2);
+SH_FIXED_RATIO_CLK(extal2_div4_clk,		extal2_div2_clk,	div2);
 
 /* PLLC0 and PLLC1 */
 static unsigned long pllc01_recalc(struct clk *clk)
@@ -147,10 +121,7 @@ static struct clk pllc1_clk = {
 };
 
 /* Divide PLLC1 by two */
-static struct clk pllc1_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &pllc1_clk,
-};
+SH_FIXED_RATIO_CLK(pllc1_div2_clk,	pllc1_clk,	div2);
 
 /* PLLC2 */
 
@@ -342,7 +313,7 @@ static struct clk_div4_table div4_table = {
 };
 
 enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR,
-       DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP,
+       DIV4_ZX, DIV4_HP,
        DIV4_ISPB, DIV4_S, DIV4_ZB, DIV4_ZB3, DIV4_CP,
        DIV4_DDRP, DIV4_NR };
 
@@ -355,8 +326,6 @@ static struct clk div4_clks[DIV4_NR] = {
 	[DIV4_B] = DIV4(FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
 	[DIV4_M1] = DIV4(FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
 	[DIV4_CSIR] = DIV4(FRQCRA, 0, 0x6fff, 0),
-	[DIV4_ZTR] = DIV4(FRQCRB, 20, 0x6fff, 0),
-	[DIV4_ZT] = DIV4(FRQCRB, 16, 0x6fff, 0),
 	[DIV4_ZX] = DIV4(FRQCRB, 12, 0x6fff, 0),
 	[DIV4_HP] = DIV4(FRQCRB, 4, 0x6fff, 0),
 	[DIV4_ISPB] = DIV4(FRQCRC, 20, 0x6fff, 0),
@@ -516,8 +485,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
 	CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
 	CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]),
-	CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]),
-	CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
 	CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]),
 	CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
 	CLKDEV_CON_ID("ispb_clk", &div4_clks[DIV4_ISPB]),
@@ -654,5 +621,4 @@ void __init sh7372_clock_init(void)
 		shmobile_clk_init();
 	else
 		panic("failed to setup sh7372 clocks\n");
-
 }