Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc driver specific updates from Olof Johansson:
 "These changes are specific to some driver that may be used by multiple
  boards or socs.  The most significant change in here is the move of
  the samsung iommu code from a platform specific in-kernel interface to
  the generic iommu subsystem."

Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  mmc: dt: Consolidate DT bindings
  iommu/exynos: Add iommu driver for EXYNOS Platforms
  ARM: davinci: optimize the DMA ISR
  ARM: davinci: implement DEBUG_LL port choice
  ARM: tegra: Add SMMU enabler in AHB
  ARM: tegra: Add Tegra AHB driver
  Input: pxa27x_keypad add choice to set direct_key_mask
  Input: pxa27x_keypad direct key may be low active
  Input: pxa27x_keypad bug fix for direct_key_mask
  Input: pxa27x_keypad keep clock on as wakeup source
  ARM: dt: tegra: pinmux changes for USB ULPI
  ARM: tegra: add USB ULPI PHY reset GPIO to device tree
  ARM: tegra: don't hard-code USB ULPI PHY reset_gpio
  ARM: tegra: change pll_p_out4's rate to 24MHz
  ARM: tegra: fix pclk rate
  ARM: tegra: reparent sclk to pll_c_out1
  ARM: tegra: Add pllc clock init table
  ARM: dt: tegra cardhu: basic audio support
  ARM: dt: tegra30.dtsi: Add audio-related nodes
  ARM: tegra: add AUXDATA required for audio
  ...

1 files changed, 36 insertions, 1 deletions

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index d0f2546706ca..6a113a9bb87a 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -50,6 +50,14 @@ config TEGRA_PCI
 	depends on ARCH_TEGRA_2x_SOC
 	select PCI
 
+config TEGRA_AHB
+	bool "Enable AHB driver for NVIDIA Tegra SoCs"
+	default y
+	help
+	  Adds AHB configuration functionality for NVIDIA Tegra SoCs,
+	  which controls AHB bus master arbitration and some
+	  perfomance parameters(priority, prefech size).
+
 comment "Tegra board type"
 
 config MACH_HARMONY
@@ -111,7 +119,7 @@ config MACH_VENTANA
          Support for the nVidia Ventana development platform
 
 choice
-        prompt "Low-level debug console UART"
+        prompt "Default low-level debug console UART"
         default TEGRA_DEBUG_UART_NONE
 
 config TEGRA_DEBUG_UART_NONE
@@ -134,6 +142,33 @@ config TEGRA_DEBUG_UARTE
 
 endchoice
 
+choice
+	prompt "Automatic low-level debug console UART"
+	default TEGRA_DEBUG_UART_AUTO_NONE
+
+config TEGRA_DEBUG_UART_AUTO_NONE
+	bool "None"
+
+config TEGRA_DEBUG_UART_AUTO_ODMDATA
+	bool "Via ODMDATA"
+	help
+	  Automatically determines which UART to use for low-level debug based
+	  on the ODMDATA value. This value is part of the BCT, and is written
+	  to the boot memory device using nvflash, or other flashing tool.
+	  When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
+	  0/1/2/3/4 are UART A/B/C/D/E.
+
+config TEGRA_DEBUG_UART_AUTO_SCRATCH
+	bool "Via UART scratch register"
+	help
+	  Automatically determines which UART to use for low-level debug based
+	  on the UART scratch register value. Some bootloaders put ASCII 'D'
+	  in this register when they initialize their own console UART output.
+	  Using this option allows the kernel to automatically pick the same
+	  UART.
+
+endchoice
+
 config TEGRA_SYSTEM_DMA
 	bool "Enable system DMA driver for NVIDIA Tegra SoCs"
 	default y