Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc-specific updates from Olof Johansson:
 "Most notable here is probably the addition of basic support for the
  BCM2835, an SoC used in some of the Roku 2 players as well as the
  much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren.
  It's still early days on mainline support, with just the basics
  working.  But it has to start somewhere!

  Beyond that there's some conversions of clock infrastructure on tegra
  to common clock, misc updates for several other platforms, and OMAP
  now has its own bus (under drivers/bus) to manage its devices through.

  This branch adds two new directories outside of arch/arm:
  drivers/irqchip for new irq controllers, and drivers/bus for the above
  OMAP bus.  It's expected that some of the other platforms will migrate
  parts of their platforms to those directories over time as well."

Fix up trivial conflicts with the clk infrastructure changes.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits)
  ARM: shmobile: add new __iomem annotation for new code
  ARM: LPC32xx: Support GPI 28
  ARM: LPC32xx: Platform update for devicetree completion of spi-pl022
  ARM: LPC32xx: Board cleanup
  irqchip: fill in empty Kconfig
  ARM: SAMSUNG: Add check for NULL in clock interface
  ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state
  ARM: EXYNOS: Add bus clock for FIMD
  ARM: SAMSUNG: Fix HDMI related warnings
  ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock
  ARM: EXYNOS: Fix incorrect help text
  ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers
  ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
  MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
  ARM: bcm2835: instantiate console UART
  ARM: bcm2835: add stub clock driver
  ARM: bcm2835: add system timer
  ARM: bcm2835: add interrupt controller driver
  ARM: add infra-structure for BCM2835 and Raspberry Pi
  ARM: tegra20: add CPU hotplug support
  ...

1 files changed, 5 insertions, 24 deletions

diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 1a208dbf682f..96ed1718eef0 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -31,6 +31,7 @@
 #include "fuse.h"
 #include "flowctrl.h"
 #include "reset.h"
+#include "tegra_cpu_car.h"
 
 extern void tegra_secondary_startup(void);
 
@@ -38,17 +39,6 @@ static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
 
 #define EVP_CPU_RESET_VECTOR \
 	(IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
-#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX \
-	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x4c)
-#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET \
-	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x340)
-#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR \
-	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x344)
-#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR \
-	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x34c)
-
-#define CPU_CLOCK(cpu)	(0x1<<(8+cpu))
-#define CPU_RESET(cpu)	(0x1111ul<<(cpu))
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
@@ -63,13 +53,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 
 static int tegra20_power_up_cpu(unsigned int cpu)
 {
-	u32 reg;
-
 	/* Enable the CPU clock. */
-	reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
-	writel(reg & ~CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
-	barrier();
-	reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+	tegra_enable_cpu_clock(cpu);
 
 	/* Clear flow controller CSR. */
 	flowctrl_write_cpu_csr(cpu, 0);
@@ -79,7 +64,6 @@ static int tegra20_power_up_cpu(unsigned int cpu)
 
 static int tegra30_power_up_cpu(unsigned int cpu)
 {
-	u32 reg;
 	int ret, pwrgateid;
 	unsigned long timeout;
 
@@ -103,8 +87,7 @@ static int tegra30_power_up_cpu(unsigned int cpu)
 	}
 
 	/* CPU partition is powered. Enable the CPU clock. */
-	writel(CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
-	reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
+	tegra_enable_cpu_clock(cpu);
 	udelay(10);
 
 	/* Remove I/O clamps. */
@@ -128,8 +111,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * via the flow controller). This will have no effect on first boot
 	 * of the CPU since it should already be in reset.
 	 */
-	writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
-	dmb();
+	tegra_put_cpu_in_reset(cpu);
 
 	/*
 	 * Unhalt the CPU. If the flow controller was used to power-gate the
@@ -155,8 +137,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 		goto done;
 
 	/* Take the CPU out of reset. */
-	writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
-	wmb();
+	tegra_cpu_out_of_reset(cpu);
 done:
 	return status;
 }