Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...

1 files changed, 0 insertions, 291 deletions

diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
deleted file mode 100644
index f63619b69113..000000000000
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bug.h>
-#include <linux/string.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-
-#include <asm/mach-types.h>
-
-#include "board-mop500.h"
-
-/* These simply sets bias for pins */
-#define BIAS(a,b) static unsigned long a[] = { b }
-
-BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0));
-BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1));
-BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0));
-
-#define AB8500_MUX_HOG(group, func) \
-	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8500.0", group, func)
-#define AB8500_PIN_HOG(pin, conf) \
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8500.0", pin, abx500_##conf)
-
-#define AB8500_MUX_STATE(group, func, dev, state) \
-	PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8500.0", group, func)
-#define AB8500_PIN_STATE(pin, conf, dev, state) \
-	PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8500.0", pin, abx500_##conf)
-
-#define AB8505_MUX_HOG(group, func) \
-	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8505.0", group, func)
-#define AB8505_PIN_HOG(pin, conf) \
-	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8505.0", pin, abx500_##conf)
-
-#define AB8505_MUX_STATE(group, func, dev, state) \
-	PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8505.0", group, func)
-#define AB8505_PIN_STATE(pin, conf, dev, state) \
-	PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8505.0", pin, abx500_##conf)
-
-static struct pinctrl_map __initdata ab8500_pinmap[] = {
-	/* Sysclkreq2 */
-	AB8500_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.35", PINCTRL_STATE_DEFAULT),
-	AB8500_PIN_STATE("GPIO1_T10", in_nopull, "regulator.35", PINCTRL_STATE_DEFAULT),
-	/* sysclkreq2 disable, mux in gpio configured in input pulldown */
-	AB8500_MUX_STATE("gpio1_a_1", "gpio", "regulator.35", PINCTRL_STATE_SLEEP),
-	AB8500_PIN_STATE("GPIO1_T10", in_pd, "regulator.35", PINCTRL_STATE_SLEEP),
-
-	/* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */
-	AB8500_MUX_HOG("gpio2_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO2_T9", in_pd),
-
-	/* Sysclkreq4 */
-	AB8500_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT),
-	AB8500_PIN_STATE("GPIO3_U9", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT),
-	/* sysclkreq4 disable, mux in gpio configured in input pulldown */
-	AB8500_MUX_STATE("gpio3_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP),
-	AB8500_PIN_STATE("GPIO3_U9", in_pd, "regulator.36", PINCTRL_STATE_SLEEP),
-
-	/* pins 4 is muxed in GPIO, configured in INPUT PULL DOWN */
-	AB8500_MUX_HOG("gpio4_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO4_W2", in_pd),
-
-	/*
-	 * pins 6,7,8 and 9 are muxed in YCBCR0123
-	 * configured in INPUT PULL UP
-	 */
-	AB8500_MUX_HOG("ycbcr0123_d_1", "ycbcr"),
-	AB8500_PIN_HOG("GPIO6_Y18", in_nopull),
-	AB8500_PIN_HOG("GPIO7_AA20", in_nopull),
-	AB8500_PIN_HOG("GPIO8_W18", in_nopull),
-	AB8500_PIN_HOG("GPIO9_AA19", in_nopull),
-
-	/*
-	 * pins 10,11,12 and 13 are muxed in GPIO
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("gpio10_d_1", "gpio"),
-	AB8500_PIN_HOG("GPIO10_U17", in_pd),
-
-	AB8500_MUX_HOG("gpio11_d_1", "gpio"),
-	AB8500_PIN_HOG("GPIO11_AA18", in_pd),
-
-	AB8500_MUX_HOG("gpio12_d_1", "gpio"),
-	AB8500_PIN_HOG("GPIO12_U16", in_pd),
-
-	AB8500_MUX_HOG("gpio13_d_1", "gpio"),
-	AB8500_PIN_HOG("GPIO13_W17", in_pd),
-
-	/*
-	 * pins 14,15 are muxed in PWM1 and PWM2
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("pwmout1_d_1", "pwmout"),
-	AB8500_PIN_HOG("GPIO14_F14", in_pd),
-
-	AB8500_MUX_HOG("pwmout2_d_1", "pwmout"),
-	AB8500_PIN_HOG("GPIO15_B17", in_pd),
-
-	/*
-	 * pins 16 is muxed in GPIO
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("gpio16_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO14_F14", in_pd),
-
-	/*
-	 * pins 17,18,19 and 20 are muxed in AUDIO interface 1
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("adi1_d_1", "adi1"),
-	AB8500_PIN_HOG("GPIO17_P5", in_pd),
-	AB8500_PIN_HOG("GPIO18_R5", in_pd),
-	AB8500_PIN_HOG("GPIO19_U5", in_pd),
-	AB8500_PIN_HOG("GPIO20_T5", in_pd),
-
-	/*
-	 * pins 21,22 and 23 are muxed in USB UICC
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("usbuicc_d_1", "usbuicc"),
-	AB8500_PIN_HOG("GPIO21_H19", in_pd),
-	AB8500_PIN_HOG("GPIO22_G20", in_pd),
-	AB8500_PIN_HOG("GPIO23_G19", in_pd),
-
-	/*
-	 * pins 24,25 are muxed in GPIO
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("gpio24_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO24_T14", in_pd),
-
-	AB8500_MUX_HOG("gpio25_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO25_R16", in_pd),
-
-	/*
-	 * pins 26 is muxed in GPIO
-	 * configured in OUTPUT LOW
-	 */
-	AB8500_MUX_HOG("gpio26_d_1", "gpio"),
-	AB8500_PIN_HOG("GPIO26_M16", out_lo),
-
-	/*
-	 * pins 27,28 are muxed in DMIC12
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("dmic12_d_1", "dmic"),
-	AB8500_PIN_HOG("GPIO27_J6", in_pd),
-	AB8500_PIN_HOG("GPIO28_K6", in_pd),
-
-	/*
-	 * pins 29,30 are muxed in DMIC34
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("dmic34_d_1", "dmic"),
-	AB8500_PIN_HOG("GPIO29_G6", in_pd),
-	AB8500_PIN_HOG("GPIO30_H6", in_pd),
-
-	/*
-	 * pins 31,32 are muxed in DMIC56
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("dmic56_d_1", "dmic"),
-	AB8500_PIN_HOG("GPIO31_F5", in_pd),
-	AB8500_PIN_HOG("GPIO32_G5", in_pd),
-
-	/*
-	 * pins 34 is muxed in EXTCPENA
-	 * configured INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("extcpena_d_1", "extcpena"),
-	AB8500_PIN_HOG("GPIO34_R17", in_pd),
-
-	/*
-	 * pins 35 is muxed in GPIO
-	 * configured in OUTPUT LOW
-	 */
-	AB8500_MUX_HOG("gpio35_d_1", "gpio"),
-	AB8500_PIN_HOG("GPIO35_W15", in_pd),
-
-	/*
-	 * pins 36,37,38 and 39 are muxed in GPIO
-	 * configured in INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("gpio36_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO36_A17", in_pd),
-
-	AB8500_MUX_HOG("gpio37_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO37_E15", in_pd),
-
-	AB8500_MUX_HOG("gpio38_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO38_C17", in_pd),
-
-	AB8500_MUX_HOG("gpio39_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO39_E16", in_pd),
-
-	/*
-	 * pins 40 and 41 are muxed in MODCSLSDA
-	 * configured INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("modsclsda_d_1", "modsclsda"),
-	AB8500_PIN_HOG("GPIO40_T19", in_pd),
-	AB8500_PIN_HOG("GPIO41_U19", in_pd),
-
-	/*
-	 * pins 42 is muxed in GPIO
-	 * configured INPUT PULL DOWN
-	 */
-	AB8500_MUX_HOG("gpio42_a_1", "gpio"),
-	AB8500_PIN_HOG("GPIO42_U2", in_pd),
-};
-
-static struct pinctrl_map __initdata ab8505_pinmap[] = {
-	/* Sysclkreq2 */
-	AB8505_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT),
-	AB8505_PIN_STATE("GPIO1_N4", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT),
-	/* sysclkreq2 disable, mux in gpio configured in input pulldown */
-	AB8505_MUX_STATE("gpio1_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP),
-	AB8505_PIN_STATE("GPIO1_N4", in_pd, "regulator.36", PINCTRL_STATE_SLEEP),
-
-	/* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */
-	AB8505_MUX_HOG("gpio2_a_1", "gpio"),
-	AB8505_PIN_HOG("GPIO2_R5", in_pd),
-
-	/* Sysclkreq4 */
-	AB8505_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.37", PINCTRL_STATE_DEFAULT),
-	AB8505_PIN_STATE("GPIO3_P5", in_nopull, "regulator.37", PINCTRL_STATE_DEFAULT),
-	/* sysclkreq4 disable, mux in gpio configured in input pulldown */
-	AB8505_MUX_STATE("gpio3_a_1", "gpio", "regulator.37", PINCTRL_STATE_SLEEP),
-	AB8505_PIN_STATE("GPIO3_P5", in_pd, "regulator.37", PINCTRL_STATE_SLEEP),
-
-	AB8505_MUX_HOG("gpio10_d_1", "gpio"),
-	AB8505_PIN_HOG("GPIO10_B16", in_pd),
-
-	AB8505_MUX_HOG("gpio11_d_1", "gpio"),
-	AB8505_PIN_HOG("GPIO11_B17", in_pd),
-
-	AB8505_MUX_HOG("gpio13_d_1", "gpio"),
-	AB8505_PIN_HOG("GPIO13_D17", in_nopull),
-
-	AB8505_MUX_HOG("pwmout1_d_1", "pwmout"),
-	AB8505_PIN_HOG("GPIO14_C16", in_pd),
-
-	AB8505_MUX_HOG("adi2_d_1", "adi2"),
-	AB8505_PIN_HOG("GPIO17_P2", in_pd),
-	AB8505_PIN_HOG("GPIO18_N3", in_pd),
-	AB8505_PIN_HOG("GPIO19_T1", in_pd),
-	AB8505_PIN_HOG("GPIO20_P3", in_pd),
-
-	AB8505_MUX_HOG("gpio34_a_1", "gpio"),
-	AB8505_PIN_HOG("GPIO34_H14", in_pd),
-
-	AB8505_MUX_HOG("modsclsda_d_1", "modsclsda"),
-	AB8505_PIN_HOG("GPIO40_J15", in_pd),
-	AB8505_PIN_HOG("GPIO41_J14", in_pd),
-
-	AB8505_MUX_HOG("gpio50_d_1", "gpio"),
-	AB8505_PIN_HOG("GPIO50_L4", in_nopull),
-
-	AB8505_MUX_HOG("resethw_d_1", "resethw"),
-	AB8505_PIN_HOG("GPIO52_D16", in_pd),
-
-	AB8505_MUX_HOG("service_d_1", "service"),
-	AB8505_PIN_HOG("GPIO53_D15", in_pd),
-};
-
-void __init mop500_pinmaps_init(void)
-{
-	if (machine_is_u8520())
-		pinctrl_register_mappings(ab8505_pinmap,
-					  ARRAY_SIZE(ab8505_pinmap));
-	else
-		pinctrl_register_mappings(ab8500_pinmap,
-					  ARRAY_SIZE(ab8500_pinmap));
-}
-
-void __init snowball_pinmaps_init(void)
-{
-	pinctrl_register_mappings(ab8500_pinmap,
-				  ARRAY_SIZE(ab8500_pinmap));
-}
-
-void __init hrefv60_pinmaps_init(void)
-{
-	pinctrl_register_mappings(ab8500_pinmap,
-				  ARRAY_SIZE(ab8500_pinmap));
-}