Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull first batch of arm-soc cleanups from Olof Johansson:
 "These cleanups are basically all over the place.  The idea is to
  collect changes with minimal impact but large number of changes so we
  can avoid them from distracting in the diffstat in the other series.

  A significant number of lines get removed here, in particular because
  the ixp2000 and ixp23xx platforms get removed.  These have never been
  extremely popular and have fallen into disuse over time with no active
  maintainer taking care of them.  The u5500 soc never made it into a
  product, so we are removing it from the ux500 platform.

  Many good cleanups also went into the at91 and omap platforms, as has
  been the case for a number of releases."

Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx}

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits)
  ARM: clps711x: Cleanup IRQ handling
  ARM clps711x: Removed unused header mach/time.h
  ARM: clps711x: Added note about support EP731x CPU to Kconfig
  ARM: clps711x: Added missing register definitions
  ARM: clps711x: Used own subarch directory for store header file
  Dove: Fix Section mismatch warnings
  ARM: orion5x: ts78xx debugging changes
  ARM: orion5x: remove PM dependency from ts78xx
  ARM: orion5x: ts78xx fix NAND resource off by one
  ARM: orion5x: ts78xx whitespace cleanups
  Orion5x: Fix Section mismatch warnings
  Orion5x: Fix warning: struct pci_dev declared inside paramter list
  ARM: clps711x: Combine header files into one for clps711x-targets
  ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c
  ARM: S3C24XX: Use common macro to define resources on mach-osiris.c
  ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable
  ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c
  ARM: S5PV210: Use common macro to define resources on dev-audio.c
  ARM: S5PC100: Use common macro to define resources on dev-audio.c
  ARM: S5P64X0: Use common macro to define resources on dev-audio.c
  ...

1 files changed, 0 insertions, 137 deletions

diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
deleted file mode 100644
index 41e9470fa0e6..000000000000
--- a/arch/arm/mach-ux500/dma-db5500.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
- * Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson
- *
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <plat/ste_dma40.h>
-#include <mach/setup.h>
-#include <mach/hardware.h>
-
-#include "ste-dma40-db5500.h"
-
-static struct resource dma40_resources[] = {
-	[0] = {
-		.start = U5500_DMA_BASE,
-		.end   = U5500_DMA_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "base",
-	},
-	[1] = {
-		.start = U5500_DMA_LCPA_BASE,
-		.end   = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "lcpa",
-	},
-	[2] = {
-		.start = IRQ_DB5500_DMA,
-		.end   = IRQ_DB5500_DMA,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-/* Default configuration for physical memcpy */
-static struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
-	.mode = STEDMA40_MODE_PHYSICAL,
-	.dir = STEDMA40_MEM_TO_MEM,
-
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.src_info.psize = STEDMA40_PSIZE_PHY_1,
-	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
-	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/* Default configuration for logical memcpy */
-static struct stedma40_chan_cfg dma40_memcpy_conf_log = {
-	.dir = STEDMA40_MEM_TO_MEM,
-
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.src_info.psize = STEDMA40_PSIZE_LOG_1,
-	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
-	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/*
- * Mapping between soruce event lines and physical device address This was
- * created assuming that the event line is tied to a device and therefore the
- * address is constant, however this is not true for at least USB, and the
- * values are just placeholders for USB.  This table is preserved and used for
- * now.
- */
-static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = {
-	[DB5500_DMA_DEV24_SDMMC0_RX] = -1,
-	[DB5500_DMA_DEV38_USB_OTG_IEP_8] = -1,
-	[DB5500_DMA_DEV23_USB_OTG_IEP_7_15] = -1,
-	[DB5500_DMA_DEV22_USB_OTG_IEP_6_14] = -1,
-	[DB5500_DMA_DEV21_USB_OTG_IEP_5_13] = -1,
-	[DB5500_DMA_DEV20_USB_OTG_IEP_4_12] = -1,
-	[DB5500_DMA_DEV6_USB_OTG_IEP_3_11] = -1,
-	[DB5500_DMA_DEV5_USB_OTG_IEP_2_10] = -1,
-	[DB5500_DMA_DEV4_USB_OTG_IEP_1_9] = -1,
-};
-
-/* Mapping between destination event lines and physical device address */
-static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = {
-	[DB5500_DMA_DEV24_SDMMC0_TX] = -1,
-	[DB5500_DMA_DEV38_USB_OTG_OEP_8] = -1,
-	[DB5500_DMA_DEV23_USB_OTG_OEP_7_15] = -1,
-	[DB5500_DMA_DEV22_USB_OTG_OEP_6_14] = -1,
-	[DB5500_DMA_DEV21_USB_OTG_OEP_5_13] = -1,
-	[DB5500_DMA_DEV20_USB_OTG_OEP_4_12] = -1,
-	[DB5500_DMA_DEV6_USB_OTG_OEP_3_11] = -1,
-	[DB5500_DMA_DEV5_USB_OTG_OEP_2_10] = -1,
-	[DB5500_DMA_DEV4_USB_OTG_OEP_1_9] = -1,
-};
-
-static int dma40_memcpy_event[] = {
-	DB5500_DMA_MEMCPY_TX_1,
-	DB5500_DMA_MEMCPY_TX_2,
-	DB5500_DMA_MEMCPY_TX_3,
-	DB5500_DMA_MEMCPY_TX_4,
-	DB5500_DMA_MEMCPY_TX_5,
-};
-
-static struct stedma40_platform_data dma40_plat_data = {
-	.dev_len		= ARRAY_SIZE(dma40_rx_map),
-	.dev_rx			= dma40_rx_map,
-	.dev_tx			= dma40_tx_map,
-	.memcpy			= dma40_memcpy_event,
-	.memcpy_len		= ARRAY_SIZE(dma40_memcpy_event),
-	.memcpy_conf_phy	= &dma40_memcpy_conf_phy,
-	.memcpy_conf_log	= &dma40_memcpy_conf_log,
-	.disabled_channels	= {-1},
-};
-
-static struct platform_device dma40_device = {
-	.dev = {
-		.platform_data = &dma40_plat_data,
-	},
-	.name		= "dma40",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dma40_resources),
-	.resource	= dma40_resources
-};
-
-void __init db5500_dma_init(struct device *parent)
-{
-	int ret;
-
-	dma40_device.dev.parent = parent;
-	ret = platform_device_register(&dma40_device);
-	if (ret)
-		dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
-
-}