Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This merge window brings a good size of cleanups on various platforms.
  Among the bigger ones:

   - Removal of Samsung s5pc100 and s5p64xx platforms.  Both of these
     have lacked active support for quite a while, and after asking
     around nobody showed interest in keeping them around.  If needed,
     they could be resurrected in the future but it's more likely that
     we would prefer reintroduction of them as DT and
     multiplatform-enabled platforms instead.

   - OMAP4 controller code register define diet.  They defined a lot of
     registers that were never actually used, etc.

   - Move of some of the Tegra platform code (PMC, APBIO, fuse,
     powergate) to drivers/soc so it can be shared with 64-bit code.
     This also converts them over to traditional driver models where
     possible.

   - Removal of legacy gpio-samsung driver, since the last users have
     been removed (moved to pinctrl)

  Plus a bunch of smaller changes for various platforms that sort of
  dissapear in the diffstat for the above.  clps711x cleanups, shmobile
  header file refactoring/moves for multiplatform friendliness, some
  misc cleanups, etc"

* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
  drivers: CCI: Correct use of ! and &
  video: clcd-versatile: Depend on ARM
  video: fix up versatile CLCD helper move
  MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
  MAINTAINERS: Remove Kirkwood
  ARM: tegra: Convert PMC to a driver
  soc/tegra: fuse: Set up in early initcall
  ARM: tegra: Always lock the CPU reset vector
  ARM: tegra: Setup CPU hotplug in a pure initcall
  soc/tegra: Implement runtime check for Tegra SoCs
  soc/tegra: fuse: fix dummy functions
  soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
  soc/tegra: Add efuse and apbmisc bindings
  soc/tegra: Add efuse driver for Tegra
  ARM: tegra: move fuse exports to soc/tegra/fuse.h
  ARM: tegra: export apb dma readl/writel
  ARM: tegra: Use a function to get the chip ID
  ARM: tegra: Sort includes alphabetically
  ARM: tegra: Move includes to include/soc/tegra
  ...

5 files changed, 11 insertions, 21 deletions

diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index a4e139aa2441..32d744e91ec2 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -796,7 +796,7 @@ static struct ab8500_regulator_reg_init ab8505_reg_init[] = {
 	INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6,              0x00, 0x00),
 };
 
-struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = {
+static struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = {
 	/* supplies to the display/camera */
 	[AB8505_LDO_AUX1] = {
 		.constraints = {
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index 842ebedbdd1c..e97ee556f92f 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -7,17 +7,15 @@
 #include <linux/io.h>
 #include <linux/of.h>
 
-#include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include "db8500-regs.h"
 #include "id.h"
 
-static void __iomem *l2x0_base;
-
 static int __init ux500_l2x0_unlock(void)
 {
 	int i;
+	void __iomem *l2x0_base = __io_address(U8500_L2CC_BASE);
 
 	/*
 	 * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
@@ -45,23 +43,15 @@ static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
 
 static int __init ux500_l2x0_init(void)
 {
-	if (cpu_is_u8500_family() || cpu_is_ux540_family())
-		l2x0_base = __io_address(U8500_L2CC_BASE);
-	else
-		/* Non-Ux500 platform */
+	/* Multiplatform guard */
+	if (!((cpu_is_u8500_family() || cpu_is_ux540_family())))
 		return -ENODEV;
 
 	/* Unlock before init */
 	ux500_l2x0_unlock();
-
 	outer_cache.write_sec = ux500_l2c310_write_sec;
-
-	if (of_have_populated_dt())
-		l2x0_of_init(0, ~0);
-	else
-		l2x0_init(l2x0_base, 0, ~0);
+	l2x0_of_init(0, ~0);
 
 	return 0;
 }
-
 early_initcall(ux500_l2x0_init);
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index fa308f07fae5..6f63954c8bde 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -33,11 +33,11 @@
 #include "db8500-regs.h"
 #include "id.h"
 
-struct ab8500_platform_data ab8500_platdata = {
+static struct ab8500_platform_data ab8500_platdata = {
 	.regulator	= &ab8500_regulator_plat_data,
 };
 
-struct prcmu_pdata db8500_prcmu_pdata = {
+static struct prcmu_pdata db8500_prcmu_pdata = {
 	.ab_platdata	= &ab8500_platdata,
 	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
 	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
@@ -82,7 +82,7 @@ static struct map_desc u9540_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K + SZ_8K),
 };
 
-void __init u8500_map_io(void)
+static void __init u8500_map_io(void)
 {
 	/*
 	 * Map the UARTs early so that the DEBUG_LL stuff continues to work.
@@ -119,7 +119,7 @@ static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
 	return ret;
 }
 
-struct arm_pmu_platdata db8500_pmu_platdata = {
+static struct arm_pmu_platdata db8500_pmu_platdata = {
 	.handle_irq		= db8500_pmu_handler,
 };
 
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index db16b5a04ad5..dbb2970ee7da 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -125,7 +125,7 @@ static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr,
 	soc_dev_attr->revision = ux500_get_revision();
 }
 
-struct device_attribute ux500_soc_attr =
+static const struct device_attribute ux500_soc_attr =
 	__ATTR(process,  S_IRUGO, ux500_get_process,  NULL);
 
 struct device * __init ux500_soc_device_init(const char *soc_id)
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 87efda0aa348..ff28d8ad1ed7 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -16,7 +16,7 @@
 #include "db8500-regs.h"
 #include "id.h"
 
-const static struct of_device_id prcmu_timer_of_match[] __initconst = {
+static const struct of_device_id prcmu_timer_of_match[] __initconst = {
 	{ .compatible = "stericsson,db8500-prcmu-timer-4", },
 	{ },
 };