Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform code updates from Arnd Bergmann:
 "This branch is the culmination of 5 years of effort to bring the ARMv6
  and ARMv7 platforms together such that they can all be enabled and
  boot the same kernel.  It has been a tremendous amount of cleanup and
  refactoring by a huge number of people, and creation of several new
  (and major) subsystems to better abstract out all the platform details
  in an appropriate manner.

  The bulk of this branch is a large patchset from Arnd that brings
  several of the more minor and older platforms we have closer to
  multiplatform support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0
  and realview Much of this is moving around header files from old mach
  directories, but there are also some cleanup patches of debug_ll
  (lowlevel debug per-platform options) and other parts.

  Linus Walleij also has some patchs to clean up the older ARM Realview
  platforms by finally introducing DT support, and Rob Herring has some
  for ARM Versatile which is now DT-only.  Both of these platforms are
  now multiplatform.

  Finally, a couple of patches from Russell for Dove PMU, and a fix from
  Valentin Rothberg for Exynos ADC, which were rebased on top of the
  series to avoid conflicts"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: realview: don't select SMP_ON_UP for UP builds
  ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
  ARM: s3c64xx: fix pm-debug compilation
  iio: exynos-adc: fix irqf_oneshot.cocci warnings
  ARM: realview: build realview-dt SMP support only when used
  ARM: realview: select apropriate targets
  ARM: realview: clean up header files
  ARM: realview: make all header files local
  ARM: no longer make CPU targets visible separately
  ARM: integrator: use explicit core module options
  ARM: realview: enable multiplatform
  ARM: make default platform work for NOMMU
  ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
  ARM: defconfig: use correct debug_ll settings
  ARM: versatile: convert to multi-platform
  ARM: versatile: merge mach code into a single file
  ARM: versatile: switch to DT only booting and remove legacy code
  ARM: versatile: add DT based PCI detection
  ARM: pxa: mark ezx structures as __maybe_unused
  ARM: pxa: mark raumfeld init functions as __maybe_unused
  ...

14 files changed, 388 insertions, 2045 deletions

diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index 1dba3688275f..e40f777ccf7d 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -1,33 +1,16 @@
-menu "Versatile platform type"
-	depends on ARCH_VERSATILE
-
-config ARCH_VERSATILE_PB
-	bool "Support Versatile Platform Baseboard for ARM926EJ-S"
-	default y
+config ARCH_VERSATILE
+	bool "ARM Ltd. Versatile family"
+	depends on ARCH_MULTI_V5
+	select ARM_AMBA
+	select ARM_TIMER_SP804
+	select ARM_VIC
+	select CLKSRC_VERSATILE
+	select COMMON_CLK_VERSATILE
 	select CPU_ARM926T
+	select ICST
 	select MIGHT_HAVE_PCI
+	select PLAT_VERSATILE
+	select VERSATILE_FPGA_IRQ
 	help
-	  Include support for the ARM(R) Versatile Platform Baseboard
-	  for the ARM926EJ-S.
-
-config MACH_VERSATILE_AB
-	bool "Support Versatile Application Baseboard for ARM926EJ-S"
-	select CPU_ARM926T
-	help
-	  Include support for the ARM(R) Versatile Application Baseboard
-	  for the ARM926EJ-S.
-
-config MACH_VERSATILE_DT
-	bool "Support Versatile platform from device tree"
-	select CPU_ARM926T
-	select USE_OF
-	help
-	  Include support for the ARM(R) Versatile/PB platform,
-	  using the device tree for discovery
-
-config MACH_VERSATILE_AUTO
-	def_bool y
-	depends on !ARCH_VERSATILE_PB && !MACH_VERSATILE_AB
-	select MACH_VERSATILE_DT
+	  This enables support for ARM Ltd Versatile board.
 
-endmenu
diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile
index 81fa3fe25e1a..41b124b5107b 100644
--- a/arch/arm/mach-versatile/Makefile
+++ b/arch/arm/mach-versatile/Makefile
@@ -2,8 +2,4 @@
 # Makefile for the linux kernel.
 #
 
-obj-y					:= core.o
-obj-$(CONFIG_ARCH_VERSATILE_PB)		+= versatile_pb.o
-obj-$(CONFIG_MACH_VERSATILE_AB)		+= versatile_ab.o
-obj-$(CONFIG_MACH_VERSATILE_DT)		+= versatile_dt.o
-obj-$(CONFIG_PCI)			+= pci.o
+obj-y					:= versatile_dt.o
diff --git a/arch/arm/mach-versatile/Makefile.boot b/arch/arm/mach-versatile/Makefile.boot
deleted file mode 100644
index ff0a4b5b0a82..000000000000
--- a/arch/arm/mach-versatile/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
deleted file mode 100644
index 23a04fe5d2ad..000000000000
--- a/arch/arm/mach-versatile/core.c
+++ /dev/null
@@ -1,808 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/core.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irqdomain.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-vic.h>
-#include <linux/irqchip/versatile-fpga.h>
-#include <linux/gfp.h>
-#include <linux/clkdev.h>
-#include <linux/mtd/physmap.h>
-#include <linux/bitops.h>
-#include <linux/reboot.h>
-
-#include <clocksource/timer-sp804.h>
-
-#include <asm/irq.h>
-#include <asm/hardware/icst.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-#include <plat/sched_clock.h>
-
-#include "core.h"
-
-/*
- * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
- * is the (PA >> 12).
- *
- * Setup a VA for the Versatile Vectored Interrupt Controller.
- */
-#define VA_VIC_BASE		__io_address(VERSATILE_VIC_BASE)
-#define VA_SIC_BASE		__io_address(VERSATILE_SIC_BASE)
-
-/* These PIC IRQs are valid in each configuration */
-#define PIC_VALID_ALL	BIT(SIC_INT_KMI0) | BIT(SIC_INT_KMI1) | \
-			BIT(SIC_INT_SCI3) | BIT(SIC_INT_UART3) | \
-			BIT(SIC_INT_CLCD) | BIT(SIC_INT_TOUCH) | \
-			BIT(SIC_INT_KEYPAD) | BIT(SIC_INT_DoC) | \
-			BIT(SIC_INT_USB) | BIT(SIC_INT_PCI0) | \
-			BIT(SIC_INT_PCI1) | BIT(SIC_INT_PCI2) | \
-			BIT(SIC_INT_PCI3)
-#if 1
-#define IRQ_MMCI0A	IRQ_VICSOURCE22
-#define IRQ_AACI	IRQ_VICSOURCE24
-#define IRQ_ETH		IRQ_VICSOURCE25
-#define PIC_MASK	0xFFD00000
-#define PIC_VALID	PIC_VALID_ALL
-#else
-#define IRQ_MMCI0A	IRQ_SIC_MMCI0A
-#define IRQ_AACI	IRQ_SIC_AACI
-#define IRQ_ETH		IRQ_SIC_ETH
-#define PIC_MASK	0
-#define PIC_VALID	PIC_VALID_ALL | BIT(SIC_INT_MMCI0A) | \
-			BIT(SIC_INT_MMCI1A) | BIT(SIC_INT_AACI) | \
-			BIT(SIC_INT_ETH)
-#endif
-
-/* Lookup table for finding a DT node that represents the vic instance */
-static const struct of_device_id vic_of_match[] __initconst = {
-	{ .compatible = "arm,versatile-vic", },
-	{}
-};
-
-static const struct of_device_id sic_of_match[] __initconst = {
-	{ .compatible = "arm,versatile-sic", },
-	{}
-};
-
-void __init versatile_init_irq(void)
-{
-	struct device_node *np;
-
-	np = of_find_matching_node_by_address(NULL, vic_of_match,
-					      VERSATILE_VIC_BASE);
-	__vic_init(VA_VIC_BASE, 0, IRQ_VIC_START, ~0, 0, np);
-
-	writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
-
-	np = of_find_matching_node_by_address(NULL, sic_of_match,
-					      VERSATILE_SIC_BASE);
-
-	fpga_irq_init(VA_SIC_BASE, "SIC", IRQ_SIC_START,
-		IRQ_VICSOURCE31, PIC_VALID, np);
-
-	/*
-	 * Interrupts on secondary controller from 0 to 8 are routed to
-	 * source 31 on PIC.
-	 * Interrupts from 21 to 31 are routed directly to the VIC on
-	 * the corresponding number on primary controller. This is controlled
-	 * by setting PIC_ENABLEx.
-	 */
-	writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
-}
-
-static struct map_desc versatile_io_desc[] __initdata __maybe_unused = {
-	{
-		.virtual	=  IO_ADDRESS(VERSATILE_SYS_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IO_ADDRESS(VERSATILE_SIC_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_SIC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IO_ADDRESS(VERSATILE_VIC_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_VIC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IO_ADDRESS(VERSATILE_SCTL_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_SCTL_BASE),
-		.length		= SZ_4K * 9,
-		.type		= MT_DEVICE
-	},
-#ifdef CONFIG_MACH_VERSATILE_AB
- 	{
-		.virtual	=  IO_ADDRESS(VERSATILE_IB2_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_IB2_BASE),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-#endif
-#ifdef CONFIG_DEBUG_LL
- 	{
-		.virtual	=  IO_ADDRESS(VERSATILE_UART0_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	},
-#endif
-#ifdef CONFIG_PCI
- 	{
-		.virtual	=  IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  (unsigned long)VERSATILE_PCI_VIRT_BASE,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_BASE),
-		.length		= VERSATILE_PCI_BASE_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  (unsigned long)VERSATILE_PCI_CFG_VIRT_BASE,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
-		.length		= VERSATILE_PCI_CFG_BASE_SIZE,
-		.type		= MT_DEVICE
-	},
-#endif
-};
-
-void __init versatile_map_io(void)
-{
-	iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
-}
-
-
-#define VERSATILE_FLASHCTRL    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
-
-static void versatile_flash_set_vpp(struct platform_device *pdev, int on)
-{
-	u32 val;
-
-	val = __raw_readl(VERSATILE_FLASHCTRL);
-	if (on)
-		val |= VERSATILE_FLASHPROG_FLVPPEN;
-	else
-		val &= ~VERSATILE_FLASHPROG_FLVPPEN;
-	__raw_writel(val, VERSATILE_FLASHCTRL);
-}
-
-static struct physmap_flash_data versatile_flash_data = {
-	.width			= 4,
-	.set_vpp		= versatile_flash_set_vpp,
-};
-
-static struct resource versatile_flash_resource = {
-	.start			= VERSATILE_FLASH_BASE,
-	.end			= VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device versatile_flash_device = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &versatile_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &versatile_flash_resource,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start		= VERSATILE_ETH_BASE,
-		.end		= VERSATILE_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_ETH,
-		.end		= IRQ_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource versatile_i2c_resource = {
-	.start			= VERSATILE_I2C_BASE,
-	.end			= VERSATILE_I2C_BASE + SZ_4K - 1,
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device versatile_i2c_device = {
-	.name			= "versatile-i2c",
-	.id			= 0,
-	.num_resources		= 1,
-	.resource		= &versatile_i2c_resource,
-};
-
-static struct i2c_board_info versatile_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
-	},
-};
-
-static int __init versatile_i2c_init(void)
-{
-	return i2c_register_board_info(0, versatile_i2c_board_info,
-				       ARRAY_SIZE(versatile_i2c_board_info));
-}
-arch_initcall(versatile_i2c_init);
-
-#define VERSATILE_SYSMCI	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
-
-unsigned int mmc_status(struct device *dev)
-{
-	struct amba_device *adev = container_of(dev, struct amba_device, dev);
-	u32 mask;
-
-	if (adev->res.start == VERSATILE_MMCI0_BASE)
-		mask = 1;
-	else
-		mask = 2;
-
-	return readl(VERSATILE_SYSMCI) & mask;
-}
-
-static struct mmci_platform_data mmc0_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
-};
-
-static struct resource char_lcd_resources[] = {
-	{
-		.start = VERSATILE_CHAR_LCD_BASE,
-		.end   = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device char_lcd_device = {
-	.name           =       "arm-charlcd",
-	.id             =       -1,
-	.num_resources  =       ARRAY_SIZE(char_lcd_resources),
-	.resource       =       char_lcd_resources,
-};
-
-static struct resource leds_resources[] = {
-	{
-		.start	= VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET,
-		.end	= VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET + 4,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_device = {
-	.name		= "versatile-leds",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(leds_resources),
-	.resource	= leds_resources,
-};
-
-/*
- * Clock handling
- */
-static const struct icst_params versatile_oscvco_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST307_VCO_MAX,
-	.vco_min	= ICST307_VCO_MIN,
-	.vd_min		= 4 + 8,
-	.vd_max		= 511 + 8,
-	.rd_min		= 1 + 2,
-	.rd_max		= 127 + 2,
-	.s2div		= icst307_s2div,
-	.idx2s		= icst307_idx2s,
-};
-
-static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco)
-{
-	void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
-	u32 val;
-
-	val = readl(clk->vcoreg) & ~0x7ffff;
-	val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, sys_lock);
-	writel(val, clk->vcoreg);
-	writel(0, sys_lock);
-}
-
-static const struct clk_ops osc4_clk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= versatile_oscvco_set,
-};
-
-static struct clk osc4_clk = {
-	.ops	= &osc4_clk_ops,
-	.params	= &versatile_oscvco_params,
-};
-
-/*
- * These are fixed clocks.
- */
-static struct clk ref24_clk = {
-	.rate	= 24000000,
-};
-
-static struct clk sp804_clk = {
-	.rate	= 1000000,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
-	{	/* AMBA bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {	/* UART0 */
-		.dev_id		= "dev:f1",
-		.clk		= &ref24_clk,
-	}, {	/* UART1 */
-		.dev_id		= "dev:f2",
-		.clk		= &ref24_clk,
-	}, {	/* UART2 */
-		.dev_id		= "dev:f3",
-		.clk		= &ref24_clk,
-	}, {	/* UART3 */
-		.dev_id		= "fpga:09",
-		.clk		= &ref24_clk,
-	}, {	/* KMI0 */
-		.dev_id		= "fpga:06",
-		.clk		= &ref24_clk,
-	}, {	/* KMI1 */
-		.dev_id		= "fpga:07",
-		.clk		= &ref24_clk,
-	}, {	/* MMC0 */
-		.dev_id		= "fpga:05",
-		.clk		= &ref24_clk,
-	}, {	/* MMC1 */
-		.dev_id		= "fpga:0b",
-		.clk		= &ref24_clk,
-	}, {	/* SSP */
-		.dev_id		= "dev:f4",
-		.clk		= &ref24_clk,
-	}, {	/* CLCD */
-		.dev_id		= "dev:20",
-		.clk		= &osc4_clk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.clk		= &sp804_clk,
-	},
-};
-
-/*
- * CLCD support.
- */
-#define SYS_CLCD_MODE_MASK	(3 << 0)
-#define SYS_CLCD_MODE_888	(0 << 0)
-#define SYS_CLCD_MODE_5551	(1 << 0)
-#define SYS_CLCD_MODE_565_RLSB	(2 << 0)
-#define SYS_CLCD_MODE_565_BLSB	(3 << 0)
-#define SYS_CLCD_NLCDIOON	(1 << 2)
-#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
-#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
-#define SYS_CLCD_ID_MASK	(0x1f << 8)
-#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
-#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
-#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
-#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
-#define SYS_CLCD_ID_VGA		(0x1f << 8)
-
-static bool is_sanyo_2_5_lcd;
-
-/*
- * Disable all display connectors on the interface module.
- */
-static void versatile_clcd_disable(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
-	u32 val;
-
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-	/*
-	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
-	 */
-	if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) {
-		void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
-		unsigned long ctrl;
-
-		ctrl = readl(versatile_ib2_ctrl);
-		ctrl &= ~0x01;
-		writel(ctrl, versatile_ib2_ctrl);
-	}
-#endif
-}
-
-/*
- * Enable the relevant connector on the interface module.
- */
-static void versatile_clcd_enable(struct clcd_fb *fb)
-{
-	struct fb_var_screeninfo *var = &fb->fb.var;
-	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
-	u32 val;
-
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_MODE_MASK;
-
-	switch (var->green.length) {
-	case 5:
-		val |= SYS_CLCD_MODE_5551;
-		break;
-	case 6:
-		if (var->red.offset == 0)
-			val |= SYS_CLCD_MODE_565_RLSB;
-		else
-			val |= SYS_CLCD_MODE_565_BLSB;
-		break;
-	case 8:
-		val |= SYS_CLCD_MODE_888;
-		break;
-	}
-
-	/*
-	 * Set the MUX
-	 */
-	writel(val, sys_clcd);
-
-	/*
-	 * And now enable the PSUs
-	 */
-	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-	/*
-	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
-	 */
-	if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) {
-		void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
-		unsigned long ctrl;
-
-		ctrl = readl(versatile_ib2_ctrl);
-		ctrl |= 0x01;
-		writel(ctrl, versatile_ib2_ctrl);
-	}
-#endif
-}
-
-/*
- * Detect which LCD panel is connected, and return the appropriate
- * clcd_panel structure.  Note: we do not have any information on
- * the required timings for the 8.4in panel, so we presently assume
- * VGA timings.
- */
-static int versatile_clcd_setup(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
-	const char *panel_name;
-	u32 val;
-
-	is_sanyo_2_5_lcd = false;
-
-	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
-	if (val == SYS_CLCD_ID_SANYO_3_8)
-		panel_name = "Sanyo TM38QV67A02A";
-	else if (val == SYS_CLCD_ID_SANYO_2_5) {
-		panel_name = "Sanyo QVGA Portrait";
-		is_sanyo_2_5_lcd = true;
-	} else if (val == SYS_CLCD_ID_EPSON_2_2)
-		panel_name = "Epson L2F50113T00";
-	else if (val == SYS_CLCD_ID_VGA)
-		panel_name = "VGA";
-	else {
-		printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
-			val);
-		panel_name = "VGA";
-	}
-
-	fb->panel = versatile_clcd_get_panel(panel_name);
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, SZ_1M);
-}
-
-static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
-{
-	clcdfb_decode(fb, regs);
-
-	/* Always clear BGR for RGB565: we do the routing externally */
-	if (fb->fb.var.green.length == 6)
-		regs->cntl &= ~CNTL_BGR;
-}
-
-static struct clcd_board clcd_plat_data = {
-	.name		= "Versatile",
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
-	.check		= clcdfb_check,
-	.decode		= versatile_clcd_decode,
-	.disable	= versatile_clcd_disable,
-	.enable		= versatile_clcd_enable,
-	.setup		= versatile_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-	.irq_base	= IRQ_GPIO0_START,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-	.irq_base	= IRQ_GPIO1_START,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-	.irq_base	= IRQ_GPIO2_START,
-};
-
-static struct pl061_platform_data gpio3_plat_data = {
-	.gpio_base	= 24,
-	.irq_base	= IRQ_GPIO3_START,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-#define AACI_IRQ	{ IRQ_AACI }
-#define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
-#define KMI0_IRQ	{ IRQ_SIC_KMI0 }
-#define KMI1_IRQ	{ IRQ_SIC_KMI1 }
-
-/*
- * These devices are connected directly to the multi-layer AHB switch
- */
-#define SMC_IRQ		{ }
-#define MPMC_IRQ	{ }
-#define CLCD_IRQ	{ IRQ_CLCDINT }
-#define DMAC_IRQ	{ IRQ_DMAINT }
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define SCTL_IRQ	{ }
-#define WATCHDOG_IRQ	{ IRQ_WDOGINT }
-#define GPIO0_IRQ	{ IRQ_GPIOINT0 }
-#define GPIO1_IRQ	{ IRQ_GPIOINT1 }
-#define GPIO2_IRQ	{ IRQ_GPIOINT2 }
-#define GPIO3_IRQ	{ IRQ_GPIOINT3 }
-#define RTC_IRQ		{ IRQ_RTCINT }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-#define SCI_IRQ		{ IRQ_SCIINT }
-#define UART0_IRQ	{ IRQ_UARTINT0 }
-#define UART1_IRQ	{ IRQ_UARTINT1 }
-#define UART2_IRQ	{ IRQ_UARTINT2 }
-#define SSP_IRQ		{ IRQ_SSPINT }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,  "fpga:04", AACI,     NULL);
-APB_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
-APB_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
-APB_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,   "dev:00",  SMC,      NULL);
-AHB_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
-AHB_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
-AHB_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
-APB_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
-APB_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
-APB_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
-APB_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
-APB_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
-APB_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
-APB_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
-APB_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
-APB_DEVICE(uart0, "dev:f1",  UART0,    NULL);
-APB_DEVICE(uart1, "dev:f2",  UART1,    NULL);
-APB_DEVICE(uart2, "dev:f3",  UART2,    NULL);
-APB_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&smc_device,
-	&mpmc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&gpio3_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-#ifdef CONFIG_OF
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate().  Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI0_BASE, "fpga:06", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI1_BASE, "fpga:07", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART3_BASE, "fpga:09", NULL),
-	/* FIXME: this is buggy, the platform data is needed for this MMC instance too */
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", NULL),
-
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART0_BASE, "dev:f1", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART1_BASE, "dev:f2", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART2_BASE, "dev:f3", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SSP_BASE, "dev:f4", &ssp0_plat_data),
-
-#if 0
-	/*
-	 * These entries are unnecessary because no clocks referencing
-	 * them.  I've left them in for now as place holders in case
-	 * any of them need to be added back, but they should be
-	 * removed before actually committing this patch.  --gcl
-	 */
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_AACI_BASE, "fpga:04", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI1_BASE, "fpga:0a", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SMC_BASE, "dev:00", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MPMC_BASE, "dev:10", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_DMAC_BASE, "dev:30", NULL),
-
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCTL_BASE, "dev:e0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_WATCHDOG_BASE, "dev:e1", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO0_BASE, "dev:e4", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO1_BASE, "dev:e5", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO2_BASE, "dev:e6", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO3_BASE, "dev:e7", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_RTC_BASE, "dev:e8", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI_BASE, "dev:f0", NULL),
-#endif
-	{}
-};
-#endif
-
-void versatile_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
-	u32 val;
-
-	val = __raw_readl(sys + VERSATILE_SYS_RESETCTL_OFFSET);
-	val |= 0x105;
-
-	__raw_writel(0xa05f, sys + VERSATILE_SYS_LOCK_OFFSET);
-	__raw_writel(val, sys + VERSATILE_SYS_RESETCTL_OFFSET);
-	__raw_writel(0, sys + VERSATILE_SYS_LOCK_OFFSET);
-}
-
-/* Early initializations */
-void __init versatile_init_early(void)
-{
-	u32 val;
-	void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
-
-	osc4_clk.vcoreg	= sys + VERSATILE_SYS_OSCCLCD_OFFSET;
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000);
-
-	/*
-	 * set clock frequency:
-	 *	VERSATILE_REFCLK is 32KHz
-	 *	VERSATILE_TIMCLK is 1MHz
-	 */
-	val = readl(__io_address(VERSATILE_SCTL_BASE));
-	writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
-	       __io_address(VERSATILE_SCTL_BASE));
-}
-
-void __init versatile_init(void)
-{
-	int i;
-
-	platform_device_register(&versatile_flash_device);
-	platform_device_register(&versatile_i2c_device);
-	platform_device_register(&smc91x_device);
-	platform_device_register(&char_lcd_device);
-	platform_device_register(&leds_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-/*
- * Where is the timer (VA)?
- */
-#define TIMER0_VA_BASE		 __io_address(VERSATILE_TIMER0_1_BASE)
-#define TIMER1_VA_BASE		(__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
-#define TIMER2_VA_BASE		 __io_address(VERSATILE_TIMER2_3_BASE)
-#define TIMER3_VA_BASE		(__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init versatile_timer_init(void)
-{
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-	sp804_timer_disable(TIMER0_VA_BASE);
-	sp804_timer_disable(TIMER1_VA_BASE);
-	sp804_timer_disable(TIMER2_VA_BASE);
-	sp804_timer_disable(TIMER3_VA_BASE);
-
-	sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
-	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0");
-}
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
deleted file mode 100644
index f06d5768e428..000000000000
--- a/arch/arm/mach-versatile/core.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/core.h
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_VERSATILE_H
-#define __ASM_ARCH_VERSATILE_H
-
-#include <linux/amba/bus.h>
-#include <linux/of_platform.h>
-#include <linux/reboot.h>
-
-extern void __init versatile_init(void);
-extern void __init versatile_init_early(void);
-extern void __init versatile_init_irq(void);
-extern void __init versatile_map_io(void);
-extern void versatile_timer_init(void);
-extern void versatile_restart(enum reboot_mode, const char *);
-extern unsigned int mmc_status(struct device *dev);
-#ifdef CONFIG_OF
-extern struct of_dev_auxdata versatile_auxdata_lookup[];
-#endif
-
-#define APB_DEVICE(name, busid, base, plat)	\
-static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
-
-#define AHB_DEVICE(name, busid, base, plat)	\
-static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
-
-#endif
diff --git a/arch/arm/mach-versatile/include/mach/clkdev.h b/arch/arm/mach-versatile/include/mach/clkdev.h
deleted file mode 100644
index e58d0771b64e..000000000000
--- a/arch/arm/mach-versatile/include/mach/clkdev.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <plat/clock.h>
-
-struct clk {
-	unsigned long		rate;
-	const struct clk_ops	*ops;
-	const struct icst_params *params;
-	void __iomem		*vcoreg;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
deleted file mode 100644
index 3e5d425e2a92..000000000000
--- a/arch/arm/mach-versatile/include/mach/hardware.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/hardware.h
- *
- *  This file contains the hardware definitions of the Versatile boards.
- *
- *  Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/*
- * PCI space virtual addresses
- */
-#define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
-#define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
-
-/* macro to get at MMIO space when running virtually */
-#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
-
-#define __io_address(n)		((void __iomem __force *)IO_ADDRESS(n))
-
-#endif
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
deleted file mode 100644
index 0fd771ca617b..000000000000
--- a/arch/arm/mach-versatile/include/mach/irqs.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/irqs.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <mach/platform.h>
-
-/* 
- *  IRQ interrupts definitions are the same as the INT definitions
- *  held within platform.h
- */
-#define IRQ_VIC_START		32
-#define IRQ_WDOGINT		(IRQ_VIC_START + INT_WDOGINT)
-#define IRQ_SOFTINT		(IRQ_VIC_START + INT_SOFTINT)
-#define IRQ_COMMRx		(IRQ_VIC_START + INT_COMMRx)
-#define IRQ_COMMTx		(IRQ_VIC_START + INT_COMMTx)
-#define IRQ_TIMERINT0_1		(IRQ_VIC_START + INT_TIMERINT0_1)
-#define IRQ_TIMERINT2_3		(IRQ_VIC_START + INT_TIMERINT2_3)
-#define IRQ_GPIOINT0		(IRQ_VIC_START + INT_GPIOINT0)
-#define IRQ_GPIOINT1		(IRQ_VIC_START + INT_GPIOINT1)
-#define IRQ_GPIOINT2		(IRQ_VIC_START + INT_GPIOINT2)
-#define IRQ_GPIOINT3		(IRQ_VIC_START + INT_GPIOINT3)
-#define IRQ_RTCINT		(IRQ_VIC_START + INT_RTCINT)
-#define IRQ_SSPINT		(IRQ_VIC_START + INT_SSPINT)
-#define IRQ_UARTINT0		(IRQ_VIC_START + INT_UARTINT0)
-#define IRQ_UARTINT1		(IRQ_VIC_START + INT_UARTINT1)
-#define IRQ_UARTINT2		(IRQ_VIC_START + INT_UARTINT2)
-#define IRQ_SCIINT		(IRQ_VIC_START + INT_SCIINT)
-#define IRQ_CLCDINT		(IRQ_VIC_START + INT_CLCDINT)
-#define IRQ_DMAINT		(IRQ_VIC_START + INT_DMAINT)
-#define IRQ_PWRFAILINT 		(IRQ_VIC_START + INT_PWRFAILINT)
-#define IRQ_MBXINT		(IRQ_VIC_START + INT_MBXINT)
-#define IRQ_GNDINT		(IRQ_VIC_START + INT_GNDINT)
-#define IRQ_VICSOURCE21		(IRQ_VIC_START + INT_VICSOURCE21)
-#define IRQ_VICSOURCE22		(IRQ_VIC_START + INT_VICSOURCE22)
-#define IRQ_VICSOURCE23		(IRQ_VIC_START + INT_VICSOURCE23)
-#define IRQ_VICSOURCE24		(IRQ_VIC_START + INT_VICSOURCE24)
-#define IRQ_VICSOURCE25		(IRQ_VIC_START + INT_VICSOURCE25)
-#define IRQ_VICSOURCE26		(IRQ_VIC_START + INT_VICSOURCE26)
-#define IRQ_VICSOURCE27		(IRQ_VIC_START + INT_VICSOURCE27)
-#define IRQ_VICSOURCE28		(IRQ_VIC_START + INT_VICSOURCE28)
-#define IRQ_VICSOURCE29		(IRQ_VIC_START + INT_VICSOURCE29)
-#define IRQ_VICSOURCE30		(IRQ_VIC_START + INT_VICSOURCE30)
-#define IRQ_VICSOURCE31		(IRQ_VIC_START + INT_VICSOURCE31)
-#define IRQ_VIC_END		(IRQ_VIC_START + 31)
-
-/* 
- *  FIQ interrupts definitions are the same as the INT definitions.
- */
-#define FIQ_WDOGINT		INT_WDOGINT
-#define FIQ_SOFTINT		INT_SOFTINT
-#define FIQ_COMMRx		INT_COMMRx
-#define FIQ_COMMTx		INT_COMMTx
-#define FIQ_TIMERINT0_1		INT_TIMERINT0_1
-#define FIQ_TIMERINT2_3		INT_TIMERINT2_3
-#define FIQ_GPIOINT0		INT_GPIOINT0
-#define FIQ_GPIOINT1		INT_GPIOINT1
-#define FIQ_GPIOINT2		INT_GPIOINT2
-#define FIQ_GPIOINT3		INT_GPIOINT3
-#define FIQ_RTCINT		INT_RTCINT
-#define FIQ_SSPINT		INT_SSPINT
-#define FIQ_UARTINT0		INT_UARTINT0
-#define FIQ_UARTINT1		INT_UARTINT1
-#define FIQ_UARTINT2		INT_UARTINT2
-#define FIQ_SCIINT		INT_SCIINT
-#define FIQ_CLCDINT		INT_CLCDINT
-#define FIQ_DMAINT		INT_DMAINT
-#define FIQ_PWRFAILINT 		INT_PWRFAILINT
-#define FIQ_MBXINT		INT_MBXINT
-#define FIQ_GNDINT		INT_GNDINT
-#define FIQ_VICSOURCE21		INT_VICSOURCE21
-#define FIQ_VICSOURCE22		INT_VICSOURCE22
-#define FIQ_VICSOURCE23		INT_VICSOURCE23
-#define FIQ_VICSOURCE24		INT_VICSOURCE24
-#define FIQ_VICSOURCE25		INT_VICSOURCE25
-#define FIQ_VICSOURCE26		INT_VICSOURCE26
-#define FIQ_VICSOURCE27		INT_VICSOURCE27
-#define FIQ_VICSOURCE28		INT_VICSOURCE28
-#define FIQ_VICSOURCE29		INT_VICSOURCE29
-#define FIQ_VICSOURCE30		INT_VICSOURCE30
-#define FIQ_VICSOURCE31		INT_VICSOURCE31
-
-
-/*
- * Secondary interrupt controller
- */
-#define IRQ_SIC_START		64
-#define IRQ_SIC_MMCI0B 		(IRQ_SIC_START + SIC_INT_MMCI0B)
-#define IRQ_SIC_MMCI1B 		(IRQ_SIC_START + SIC_INT_MMCI1B)
-#define IRQ_SIC_KMI0		(IRQ_SIC_START + SIC_INT_KMI0)
-#define IRQ_SIC_KMI1		(IRQ_SIC_START + SIC_INT_KMI1)
-#define IRQ_SIC_SCI3		(IRQ_SIC_START + SIC_INT_SCI3)
-#define IRQ_SIC_UART3		(IRQ_SIC_START + SIC_INT_UART3)
-#define IRQ_SIC_CLCD		(IRQ_SIC_START + SIC_INT_CLCD)
-#define IRQ_SIC_TOUCH		(IRQ_SIC_START + SIC_INT_TOUCH)
-#define IRQ_SIC_KEYPAD 		(IRQ_SIC_START + SIC_INT_KEYPAD)
-#define IRQ_SIC_DoC		(IRQ_SIC_START + SIC_INT_DoC)
-#define IRQ_SIC_MMCI0A 		(IRQ_SIC_START + SIC_INT_MMCI0A)
-#define IRQ_SIC_MMCI1A 		(IRQ_SIC_START + SIC_INT_MMCI1A)
-#define IRQ_SIC_AACI		(IRQ_SIC_START + SIC_INT_AACI)
-#define IRQ_SIC_ETH		(IRQ_SIC_START + SIC_INT_ETH)
-#define IRQ_SIC_USB		(IRQ_SIC_START + SIC_INT_USB)
-#define IRQ_SIC_PCI0		(IRQ_SIC_START + SIC_INT_PCI0)
-#define IRQ_SIC_PCI1		(IRQ_SIC_START + SIC_INT_PCI1)
-#define IRQ_SIC_PCI2		(IRQ_SIC_START + SIC_INT_PCI2)
-#define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
-#define IRQ_SIC_END		95
-
-#define IRQ_GPIO0_START		(IRQ_SIC_END + 1)
-#define IRQ_GPIO0_END		(IRQ_GPIO0_START + 31)
-#define IRQ_GPIO1_START		(IRQ_GPIO0_END + 1)
-#define IRQ_GPIO1_END		(IRQ_GPIO1_START + 31)
-#define IRQ_GPIO2_START		(IRQ_GPIO1_END + 1)
-#define IRQ_GPIO2_END		(IRQ_GPIO2_START + 31)
-#define IRQ_GPIO3_START		(IRQ_GPIO2_END + 1)
-#define IRQ_GPIO3_END		(IRQ_GPIO3_START + 31)
-
-#define NR_IRQS			(IRQ_GPIO3_END + 1)
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
deleted file mode 100644
index 6f938ccb0c54..000000000000
--- a/arch/arm/mach-versatile/include/mach/platform.h
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/platform.h
- *
- * Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __address_h
-#define __address_h                     1
-
-/*
- * Memory definitions
- */
-#define VERSATILE_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
-#define VERSATILE_BOOT_ROM_HI          0x30000000
-#define VERSATILE_BOOT_ROM_BASE        VERSATILE_BOOT_ROM_HI	 /*  Normal position */
-#define VERSATILE_BOOT_ROM_SIZE        SZ_64M
-
-#define VERSATILE_SSRAM_BASE           /* VERSATILE_SSMC_BASE ? */
-#define VERSATILE_SSRAM_SIZE           SZ_2M
-
-#define VERSATILE_FLASH_BASE           0x34000000
-#define VERSATILE_FLASH_SIZE           SZ_64M
-
-/* 
- *  SDRAM
- */
-#define VERSATILE_SDRAM_BASE           0x00000000
-
-/* 
- *  Logic expansion modules
- * 
- */
-
-
-/* ------------------------------------------------------------------------
- *  Versatile Registers
- * ------------------------------------------------------------------------
- * 
- */
-#define VERSATILE_SYS_ID_OFFSET               0x00
-#define VERSATILE_SYS_SW_OFFSET               0x04
-#define VERSATILE_SYS_LED_OFFSET              0x08
-#define VERSATILE_SYS_OSC0_OFFSET             0x0C
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC1_OFFSET             0x10
-#define VERSATILE_SYS_OSC2_OFFSET             0x14
-#define VERSATILE_SYS_OSC3_OFFSET             0x18
-#define VERSATILE_SYS_OSC4_OFFSET             0x1C
-#elif defined(CONFIG_MACH_VERSATILE_AB)
-#define VERSATILE_SYS_OSC1_OFFSET             0x1C
-#endif
-
-#define VERSATILE_SYS_OSCCLCD_OFFSET          0x1c
-
-#define VERSATILE_SYS_LOCK_OFFSET             0x20
-#define VERSATILE_SYS_100HZ_OFFSET            0x24
-#define VERSATILE_SYS_CFGDATA1_OFFSET         0x28
-#define VERSATILE_SYS_CFGDATA2_OFFSET         0x2C
-#define VERSATILE_SYS_FLAGS_OFFSET            0x30
-#define VERSATILE_SYS_FLAGSSET_OFFSET         0x30
-#define VERSATILE_SYS_FLAGSCLR_OFFSET         0x34
-#define VERSATILE_SYS_NVFLAGS_OFFSET          0x38
-#define VERSATILE_SYS_NVFLAGSSET_OFFSET       0x38
-#define VERSATILE_SYS_NVFLAGSCLR_OFFSET       0x3C
-#define VERSATILE_SYS_RESETCTL_OFFSET         0x40
-#define VERSATILE_SYS_PCICTL_OFFSET           0x44
-#define VERSATILE_SYS_MCI_OFFSET              0x48
-#define VERSATILE_SYS_FLASH_OFFSET            0x4C
-#define VERSATILE_SYS_CLCD_OFFSET             0x50
-#define VERSATILE_SYS_CLCDSER_OFFSET          0x54
-#define VERSATILE_SYS_BOOTCS_OFFSET           0x58
-#define VERSATILE_SYS_24MHz_OFFSET            0x5C
-#define VERSATILE_SYS_MISC_OFFSET             0x60
-#define VERSATILE_SYS_TEST_OSC0_OFFSET        0x80
-#define VERSATILE_SYS_TEST_OSC1_OFFSET        0x84
-#define VERSATILE_SYS_TEST_OSC2_OFFSET        0x88
-#define VERSATILE_SYS_TEST_OSC3_OFFSET        0x8C
-#define VERSATILE_SYS_TEST_OSC4_OFFSET        0x90
-
-#define VERSATILE_SYS_BASE                    0x10000000
-#define VERSATILE_SYS_ID                      (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
-#define VERSATILE_SYS_SW                      (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
-#define VERSATILE_SYS_LED                     (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
-#define VERSATILE_SYS_OSC0                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
-#define VERSATILE_SYS_OSC1                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC2                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
-#define VERSATILE_SYS_OSC3                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
-#define VERSATILE_SYS_OSC4                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
-#endif
-
-#define VERSATILE_SYS_LOCK                    (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
-#define VERSATILE_SYS_100HZ                   (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
-#define VERSATILE_SYS_CFGDATA1                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
-#define VERSATILE_SYS_CFGDATA2                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
-#define VERSATILE_SYS_FLAGS                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
-#define VERSATILE_SYS_FLAGSSET                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
-#define VERSATILE_SYS_FLAGSCLR                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
-#define VERSATILE_SYS_NVFLAGS                 (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
-#define VERSATILE_SYS_NVFLAGSSET              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
-#define VERSATILE_SYS_NVFLAGSCLR              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
-#define VERSATILE_SYS_RESETCTL                (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
-#define VERSATILE_SYS_PCICTL                  (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET)
-#define VERSATILE_SYS_MCI                     (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
-#define VERSATILE_SYS_FLASH                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
-#define VERSATILE_SYS_CLCD                    (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
-#define VERSATILE_SYS_CLCDSER                 (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
-#define VERSATILE_SYS_BOOTCS                  (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
-#define VERSATILE_SYS_24MHz                   (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
-#define VERSATILE_SYS_MISC                    (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
-#define VERSATILE_SYS_TEST_OSC0               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
-#define VERSATILE_SYS_TEST_OSC1               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
-#define VERSATILE_SYS_TEST_OSC2               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
-#define VERSATILE_SYS_TEST_OSC3               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
-#define VERSATILE_SYS_TEST_OSC4               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
-
-/* 
- * Values for VERSATILE_SYS_RESET_CTRL
- */
-#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define VERSATILE_SYS_CTRL_RESET_DLLRESET     0x03
-#define VERSATILE_SYS_CTRL_RESET_PLLRESET     0x04
-#define VERSATILE_SYS_CTRL_RESET_POR          0x05
-#define VERSATILE_SYS_CTRL_RESET_DoC          0x06
-
-#define VERSATILE_SYS_CTRL_LED         (1 << 0)
-
-
-/* ------------------------------------------------------------------------
- *  Versatile control registers
- * ------------------------------------------------------------------------
- */
-
-/* 
- * VERSATILE_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4  = build value
- * 3:0   = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * VERSATILE_SYS_LOCK
- *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
- *     SYS_CLD, SYS_BOOTCS
- */
-#define VERSATILE_SYS_LOCK_LOCKED    (1 << 16)
-#define VERSATILE_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
-
-/*
- * VERSATILE_SYS_FLASH
- */
-#define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
-
-/*
- * VERSATILE_INTREG
- *     - used to acknowledge and control MMCI and UART interrupts 
- */
-#define VERSATILE_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
-#define VERSATILE_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
-#define VERSATILE_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
-                                                /* write 1 to acknowledge and clear               */
-#define VERSATILE_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
-#define VERSATILE_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
-
-/*
- * VERSATILE peripheral addresses
- */
-#define VERSATILE_PCI_CORE_BASE        0x10001000	/* PCI core control */
-#define VERSATILE_I2C_BASE             0x10002000	/* I2C control */
-#define VERSATILE_SIC_BASE             0x10003000	/* Secondary interrupt controller */
-#define VERSATILE_AACI_BASE            0x10004000	/* Audio */
-#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
-#define VERSATILE_KMI0_BASE            0x10006000	/* KMI interface */
-#define VERSATILE_KMI1_BASE            0x10007000	/* KMI 2nd interface */
-#define VERSATILE_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define VERSATILE_UART3_BASE           0x10009000	/* UART 3 */
-#define VERSATILE_SCI1_BASE            0x1000A000
-#define VERSATILE_MMCI1_BASE           0x1000B000    /* MMC Interface */
-	/* 0x1000C000 - 0x1000CFFF = reserved */
-#define VERSATILE_ETH_BASE             0x10010000	/* Ethernet */
-#define VERSATILE_USB_BASE             0x10020000	/* USB */
-	/* 0x10030000 - 0x100FFFFF = reserved */
-#define VERSATILE_SMC_BASE             0x10100000	/* SMC */
-#define VERSATILE_MPMC_BASE            0x10110000	/* MPMC */
-#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
-#define VERSATILE_DMAC_BASE            0x10130000	/* DMA controller */
-#define VERSATILE_VIC_BASE             0x10140000	/* Vectored interrupt controller */
-#define VERSATILE_PERIPH_BASE          0x10150000	/* off-chip peripherals alias from */
-                                                /* 0x10000000 - 0x100FFFFF */
-#define VERSATILE_AHBM_BASE            0x101D0000	/* AHB monitor */
-#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
-#define VERSATILE_WATCHDOG_BASE        0x101E1000	/* Watchdog */
-#define VERSATILE_TIMER0_1_BASE        0x101E2000	/* Timer 0 and 1 */
-#define VERSATILE_TIMER2_3_BASE        0x101E3000	/* Timer 2 and 3 */
-#define VERSATILE_GPIO0_BASE           0x101E4000	/* GPIO port 0 */
-#define VERSATILE_GPIO1_BASE           0x101E5000	/* GPIO port 1 */
-#define VERSATILE_GPIO2_BASE           0x101E6000	/* GPIO port 2 */
-#define VERSATILE_GPIO3_BASE           0x101E7000	/* GPIO port 3 */
-#define VERSATILE_RTC_BASE             0x101E8000	/* Real Time Clock */
-	/* 0x101E9000 - reserved */
-#define VERSATILE_SCI_BASE             0x101F0000	/* Smart card controller */
-#define VERSATILE_UART0_BASE           0x101F1000	/* Uart 0 */
-#define VERSATILE_UART1_BASE           0x101F2000	/* Uart 1 */
-#define VERSATILE_UART2_BASE           0x101F3000	/* Uart 2 */
-#define VERSATILE_SSP_BASE             0x101F4000	/* Synchronous Serial Port */
-
-#define VERSATILE_SSMC_BASE            0x20000000	/* SSMC */
-#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
-#define VERSATILE_MBX_BASE             0x40000000	/* MBX */
-
-/* PCI space */
-#define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
-#define VERSATILE_PCI_CFG_BASE	       0x42000000
-#define VERSATILE_PCI_IO_BASE          0x43000000
-#define VERSATILE_PCI_MEM_BASE0        0x44000000
-#define VERSATILE_PCI_MEM_BASE1        0x50000000
-#define VERSATILE_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define VERSATILE_PCI_BASE_SIZE	       0x01000000
-#define VERSATILE_PCI_CFG_BASE_SIZE    0x02000000
-#define VERSATILE_PCI_IO_BASE_SIZE     0x01000000
-#define VERSATILE_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define VERSATILE_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define VERSATILE_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
-#define VERSATILE_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
-#define VERSATILE_LT_BASE              0x80000000	/* Logic Tile expansion */
-
-/*
- * Disk on Chip
- */
-#define VERSATILE_DOC_BASE             0x2C000000
-#define VERSATILE_DOC_SIZE             (16 << 20)
-#define VERSATILE_DOC_PAGE_SIZE        512
-#define VERSATILE_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES    32
-#define START_PAGE          0x80
-
-/* 
- *  LED settings, bits [7:0]
- */
-#define VERSATILE_SYS_LED0             (1 << 0)
-#define VERSATILE_SYS_LED1             (1 << 1)
-#define VERSATILE_SYS_LED2             (1 << 2)
-#define VERSATILE_SYS_LED3             (1 << 3)
-#define VERSATILE_SYS_LED4             (1 << 4)
-#define VERSATILE_SYS_LED5             (1 << 5)
-#define VERSATILE_SYS_LED6             (1 << 6)
-#define VERSATILE_SYS_LED7             (1 << 7)
-
-#define ALL_LEDS                  0xFF
-
-#define LED_BANK                  VERSATILE_SYS_LED
-
-/* 
- * Control registers
- */
-#define VERSATILE_IDFIELD_OFFSET	0x0	/* Versatile build information */
-#define VERSATILE_FLASHPROG_OFFSET	0x4	/* Flash devices */
-#define VERSATILE_INTREG_OFFSET		0x8	/* Interrupt control */
-#define VERSATILE_DECODE_OFFSET		0xC	/* Fitted logic modules */
-
-
-/* ------------------------------------------------------------------------
- *  Versatile Interrupt Controller - control registers
- * ------------------------------------------------------------------------
- * 
- *  Offsets from interrupt controller base 
- * 
- *  System Controller interrupt controller base is
- * 
- * 	VERSATILE_IC_BASE
- * 
- *  Core Module interrupt controller base is
- * 
- * 	VERSATILE_SYS_IC 
- * 
- */
-/* VIC definitions in include/asm-arm/hardware/vic.h */
-
-#define SIC_IRQ_STATUS                  0
-#define SIC_IRQ_RAW_STATUS              0x04
-#define SIC_IRQ_ENABLE                  0x08
-#define SIC_IRQ_ENABLE_SET              0x08
-#define SIC_IRQ_ENABLE_CLEAR            0x0C
-#define SIC_INT_SOFT_SET                0x10
-#define SIC_INT_SOFT_CLEAR              0x14
-#define SIC_INT_PIC_ENABLE              0x20	/* read status of pass through mask */
-#define SIC_INT_PIC_ENABLES             0x20	/* set interrupt pass through bits */
-#define SIC_INT_PIC_ENABLEC             0x24	/* Clear interrupt pass through bits */
-
-/* ------------------------------------------------------------------------
- *  Interrupts - bit assignment (primary)
- * ------------------------------------------------------------------------
- */
-
-#define INT_WDOGINT                     0	/* Watchdog timer */
-#define INT_SOFTINT                     1	/* Software interrupt */
-#define INT_COMMRx                      2	/* Debug Comm Rx interrupt */
-#define INT_COMMTx                      3	/* Debug Comm Tx interrupt */
-#define INT_TIMERINT0_1                 4	/* Timer 0 and 1 */
-#define INT_TIMERINT2_3                 5	/* Timer 2 and 3 */
-#define INT_GPIOINT0                    6	/* GPIO 0 */
-#define INT_GPIOINT1                    7	/* GPIO 1 */
-#define INT_GPIOINT2                    8	/* GPIO 2 */
-#define INT_GPIOINT3                    9	/* GPIO 3 */
-#define INT_RTCINT                      10	/* Real Time Clock */
-#define INT_SSPINT                      11	/* Synchronous Serial Port */
-#define INT_UARTINT0                    12	/* UART 0 on development chip */
-#define INT_UARTINT1                    13	/* UART 1 on development chip */
-#define INT_UARTINT2                    14	/* UART 2 on development chip */
-#define INT_SCIINT                      15	/* Smart Card Interface */
-#define INT_CLCDINT                     16	/* CLCD controller */
-#define INT_DMAINT                      17	/* DMA controller */
-#define INT_PWRFAILINT                  18	/* Power failure */
-#define INT_MBXINT                      19	/* Graphics processor */
-#define INT_GNDINT                      20	/* Reserved */
-	/* External interrupt signals from logic tiles or secondary controller */
-#define INT_VICSOURCE21                 21	/* Disk on Chip */
-#define INT_VICSOURCE22                 22	/* MCI0A */
-#define INT_VICSOURCE23                 23	/* MCI1A */
-#define INT_VICSOURCE24                 24	/* AACI */
-#define INT_VICSOURCE25                 25	/* Ethernet */
-#define INT_VICSOURCE26                 26	/* USB */
-#define INT_VICSOURCE27                 27	/* PCI 0 */
-#define INT_VICSOURCE28                 28	/* PCI 1 */
-#define INT_VICSOURCE29                 29	/* PCI 2 */
-#define INT_VICSOURCE30                 30	/* PCI 3 */
-#define INT_VICSOURCE31                 31	/* SIC source */
-
-#define VERSATILE_SC_VALID_INT               0x003FFFFF
-
-#define MAXIRQNUM                       31
-#define MAXFIQNUM                       31
-#define MAXSWINUM                       31
-
-/* ------------------------------------------------------------------------
- *  Interrupts - bit assignment (secondary)
- * ------------------------------------------------------------------------
- */
-#define SIC_INT_MMCI0B                  1	/* Multimedia Card 0B */
-#define SIC_INT_MMCI1B                  2	/* Multimedia Card 1B */
-#define SIC_INT_KMI0                    3	/* Keyboard/Mouse port 0 */
-#define SIC_INT_KMI1                    4	/* Keyboard/Mouse port 1 */
-#define SIC_INT_SCI3                    5	/* Smart Card interface */
-#define SIC_INT_UART3                   6	/* UART 3 empty or data available */
-#define SIC_INT_CLCD                    7	/* Character LCD */
-#define SIC_INT_TOUCH                   8	/* Touchscreen */
-#define SIC_INT_KEYPAD                  9	/* Key pressed on display keypad */
-	/* 10:20 - reserved */
-#define SIC_INT_DoC                     21	/* Disk on Chip memory controller */
-#define SIC_INT_MMCI0A                  22	/* MMC 0A */
-#define SIC_INT_MMCI1A                  23	/* MMC 1A */
-#define SIC_INT_AACI                    24	/* Audio Codec */
-#define SIC_INT_ETH                     25	/* Ethernet controller */
-#define SIC_INT_USB                     26	/* USB controller */
-#define SIC_INT_PCI0                    27
-#define SIC_INT_PCI1                    28
-#define SIC_INT_PCI2                    29
-#define SIC_INT_PCI3                    30
-
-
-/*
- * System controller bit assignment
- */
-#define VERSATILE_REFCLK	0
-#define VERSATILE_TIMCLK	1
-
-#define VERSATILE_TIMER1_EnSel	15
-#define VERSATILE_TIMER2_EnSel	17
-#define VERSATILE_TIMER3_EnSel	19
-#define VERSATILE_TIMER4_EnSel	21
-
-
-#define VERSATILE_CSR_BASE             0x10000000
-#define VERSATILE_CSR_SIZE             0x10000000
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-/*
- * IB2 Versatile/AB expansion board definitions
- */
-#define VERSATILE_IB2_CAMERA_BANK	VERSATILE_IB2_BASE
-#define VERSATILE_IB2_KBD_DATAREG	(VERSATILE_IB2_BASE + 0x01000000)
-
-/* VICINTSOURCE27 */
-#define VERSATILE_IB2_INT_BASE		(VERSATILE_IB2_BASE + 0x02000000)
-#define VERSATILE_IB2_IER		(VERSATILE_IB2_INT_BASE + 0)
-#define VERSATILE_IB2_ISR		(VERSATILE_IB2_INT_BASE + 4)
-
-#define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
-#define VERSATILE_IB2_CTRL		(VERSATILE_IB2_CTL_BASE + 0)
-#define VERSATILE_IB2_STAT		(VERSATILE_IB2_CTL_BASE + 4)
-#endif
-
-#endif
diff --git a/arch/arm/mach-versatile/include/mach/uncompress.h b/arch/arm/mach-versatile/include/mach/uncompress.h
deleted file mode 100644
index 986e3d303f3c..000000000000
--- a/arch/arm/mach-versatile/include/mach/uncompress.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define AMBA_UART_DR	(*(volatile unsigned char *)0x101F1000)
-#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x101F102C)
-#define AMBA_UART_CR	(*(volatile unsigned char *)0x101F1030)
-#define AMBA_UART_FR	(*(volatile unsigned char *)0x101F1018)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (AMBA_UART_FR & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
-	while (AMBA_UART_FR & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
deleted file mode 100644
index c97be4ea76d2..000000000000
--- a/arch/arm/mach-versatile/pci.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/pci.c
- *
- * (C) Copyright Koninklijke Philips Electronics NV 2004. All rights reserved.
- * You can redistribute and/or modify this software under the terms of version 2
- * of the GNU General Public License as published by the Free Software Foundation.
- * THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED
- * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- * Koninklijke Philips Electronics nor its subsidiaries is obligated to provide any support for this software.
- *
- * ARM Versatile PCI driver.
- *
- * 14/04/2005 Initial version, colin.king@philips.com
- *
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-
-/*
- * these spaces are mapped using the following base registers:
- *
- * Usage Local Bus Memory         Base/Map registers used
- *
- * Mem   50000000 - 5FFFFFFF      LB_BASE0/LB_MAP0,  non prefetch
- * Mem   60000000 - 6FFFFFFF      LB_BASE1/LB_MAP1,  prefetch
- * IO    44000000 - 4FFFFFFF      LB_BASE2/LB_MAP2,  IO
- * Cfg   42000000 - 42FFFFFF	  PCI config
- *
- */
-#define __IO_ADDRESS(n) ((void __iomem *)(unsigned long)IO_ADDRESS(n))
-#define SYS_PCICTL		__IO_ADDRESS(VERSATILE_SYS_PCICTL)
-#define PCI_IMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0)
-#define PCI_IMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4)
-#define PCI_IMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8)
-#define PCI_SMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
-#define PCI_SMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
-#define PCI_SMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x1c)
-#define PCI_SELFID		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc)
-
-#define DEVICE_ID_OFFSET		0x00
-#define CSR_OFFSET			0x04
-#define CLASS_ID_OFFSET			0x08
-
-#define VP_PCI_DEVICE_ID		0x030010ee
-#define VP_PCI_CLASS_ID			0x0b400000
-
-static unsigned long pci_slot_ignore = 0;
-
-static int __init versatile_pci_slot_ignore(char *str)
-{
-	int retval;
-	int slot;
-
-	while ((retval = get_option(&str,&slot))) {
-		if ((slot < 0) || (slot > 31)) {
-			printk("Illegal slot value: %d\n",slot);
-		} else {
-			pci_slot_ignore |= (1 << slot);
-		}
-	}
-	return 1;
-}
-
-__setup("pci_slot_ignore=", versatile_pci_slot_ignore);
-
-
-static void __iomem *__pci_addr(struct pci_bus *bus,
-				unsigned int devfn, int offset)
-{
-	unsigned int busnr = bus->number;
-
-	/*
-	 * Trap out illegal values
-	 */
-	if (offset > 255)
-		BUG();
-	if (busnr > 255)
-		BUG();
-	if (devfn > 255)
-		BUG();
-
-	return VERSATILE_PCI_CFG_VIRT_BASE + ((busnr << 16) |
-		(PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset);
-}
-
-static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-				 int size, u32 *val)
-{
-	void __iomem *addr = __pci_addr(bus, devfn, where & ~3);
-	u32 v;
-	int slot = PCI_SLOT(devfn);
-
-	if (pci_slot_ignore & (1 << slot)) {
-		/* Ignore this slot */
-		switch (size) {
-		case 1:
-			v = 0xff;
-			break;
-		case 2:
-			v = 0xffff;
-			break;
-		default:
-			v = 0xffffffff;
-		}
-	} else {
-		switch (size) {
-		case 1:
-			v = __raw_readl(addr);
-			if (where & 2) v >>= 16;
-			if (where & 1) v >>= 8;
- 			v &= 0xff;
-			break;
-
-		case 2:
-			v = __raw_readl(addr);
-			if (where & 2) v >>= 16;
- 			v &= 0xffff;
-			break;
-
-		default:
-			v = __raw_readl(addr);
-			break;
-		}
-	}
-
-	*val = v;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int versatile_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-				  int size, u32 val)
-{
-	void __iomem *addr = __pci_addr(bus, devfn, where);
-	int slot = PCI_SLOT(devfn);
-
-	if (pci_slot_ignore & (1 << slot)) {
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	switch (size) {
-	case 1:
-		__raw_writeb((u8)val, addr);
-		break;
-
-	case 2:
-		__raw_writew((u16)val, addr);
-		break;
-
-	case 4:
-		__raw_writel(val, addr);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pci_versatile_ops = {
-	.read	= versatile_read_config,
-	.write	= versatile_write_config,
-};
-
-static struct resource unused_mem = {
-	.name	= "PCI unused",
-	.start	= VERSATILE_PCI_MEM_BASE0,
-	.end	= VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct resource non_mem = {
-	.name	= "PCI non-prefetchable",
-	.start	= VERSATILE_PCI_MEM_BASE1,
-	.end	= VERSATILE_PCI_MEM_BASE1+VERSATILE_PCI_MEM_BASE1_SIZE-1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct resource pre_mem = {
-	.name	= "PCI prefetchable",
-	.start	= VERSATILE_PCI_MEM_BASE2,
-	.end	= VERSATILE_PCI_MEM_BASE2+VERSATILE_PCI_MEM_BASE2_SIZE-1,
-	.flags	= IORESOURCE_MEM | IORESOURCE_PREFETCH,
-};
-
-static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
-{
-	int ret = 0;
-
-	ret = request_resource(&iomem_resource, &unused_mem);
-	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate unused "
-		       "memory region (%d)\n", ret);
-		goto out;
-	}
-	ret = request_resource(&iomem_resource, &non_mem);
-	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
-		       "memory region (%d)\n", ret);
-		goto release_unused_mem;
-	}
-	ret = request_resource(&iomem_resource, &pre_mem);
-	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate prefetchable "
-		       "memory region (%d)\n", ret);
-		goto release_non_mem;
-	}
-
-	/*
-	 * the mem resource for this bus
-	 * the prefetch mem resource for this bus
-	 */
-	pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
-	pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
-
-	goto out;
-
- release_non_mem:
-	release_resource(&non_mem);
- release_unused_mem:
-	release_resource(&unused_mem);
- out:
-	return ret;
-}
-
-int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
-{
-	int ret = 0;
-        int i;
-        int myslot = -1;
-	unsigned long val;
-	void __iomem *local_pci_cfg_base;
-
-	val = __raw_readl(SYS_PCICTL);
-	if (!(val & 1)) {
-		printk("Not plugged into PCI backplane!\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	ret = pci_ioremap_io(0, VERSATILE_PCI_IO_BASE);
-	if (ret)
-		goto out;
-
-	if (nr == 0) {
-		ret = pci_versatile_setup_resources(sys);
-		if (ret < 0) {
-			printk("pci_versatile_setup: resources... oops?\n");
-			goto out;
-		}
-	} else {
-		printk("pci_versatile_setup: resources... nr == 0??\n");
-		goto out;
-	}
-
-	/*
-	 *  We need to discover the PCI core first to configure itself
-	 *  before the main PCI probing is performed
-	 */
-	for (i=0; i<32; i++)
-		if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) &&
-		    (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) {
-			myslot = i;
-			break;
-		}
-
-	if (myslot == -1) {
-		printk("Cannot find PCI core!\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	printk("PCI core found (slot %d)\n",myslot);
-
-	__raw_writel(myslot, PCI_SELFID);
-	local_pci_cfg_base = VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11);
-
-	val = __raw_readl(local_pci_cfg_base + CSR_OFFSET);
-	val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
-	__raw_writel(val, local_pci_cfg_base + CSR_OFFSET);
-
-	/*
-	 * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM
-	 */
-	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0);
-	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1);
-	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
-
-	/*
-	 * For many years the kernel and QEMU were symbiotically buggy
-	 * in that they both assumed the same broken IRQ mapping.
-	 * QEMU therefore attempts to auto-detect old broken kernels
-	 * so that they still work on newer QEMU as they did on old
-	 * QEMU. Since we now use the correct (ie matching-hardware)
-	 * IRQ mapping we write a definitely different value to a
-	 * PCI_INTERRUPT_LINE register to tell QEMU that we expect
-	 * real hardware behaviour and it need not be backwards
-	 * compatible for us. This write is harmless on real hardware.
-	 */
-	__raw_writel(0, VERSATILE_PCI_VIRT_BASE+PCI_INTERRUPT_LINE);
-
-	/*
-	 * Do not to map Versatile FPGA PCI device into memory space
-	 */
-	pci_slot_ignore |= (1 << myslot);
-	ret = 1;
-
- out:
-	return ret;
-}
-
-
-void __init pci_versatile_preinit(void)
-{
-	pcibios_min_mem = 0x50000000;
-
-	__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0);
-	__raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1);
-	__raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2);
-
-	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0);
-	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1);
-	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2);
-
-	__raw_writel(1, SYS_PCICTL);
-}
-
-/*
- * map the specified device/slot/pin to an IRQ.   Different backplanes may need to modify this.
- */
-static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Slot	INTA	INTB	INTC	INTD
-	 * 31	PCI1	PCI2	PCI3	PCI0
-	 * 30	PCI0	PCI1	PCI2	PCI3
-	 * 29	PCI3	PCI0	PCI1	PCI2
-	 */
-	irq = IRQ_SIC_PCI0 + ((slot + 2 + pin - 1) & 3);
-
-	return irq;
-}
-
-static struct hw_pci versatile_pci __initdata = {
-	.map_irq		= versatile_map_irq,
-	.nr_controllers		= 1,
-	.ops			= &pci_versatile_ops,
-	.setup			= pci_versatile_setup,
-	.preinit		= pci_versatile_preinit,
-};
-
-static int __init versatile_pci_init(void)
-{
-	pci_common_init(&versatile_pci);
-	return 0;
-}
-
-subsys_initcall(versatile_pci_init);
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
deleted file mode 100644
index 1caef1093793..000000000000
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/versatile_ab.c
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include "core.h"
-
-MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.map_io		= versatile_map_io,
-	.init_early	= versatile_init_early,
-	.init_irq	= versatile_init_irq,
-	.init_time	= versatile_timer_init,
-	.init_machine	= versatile_init,
-	.restart	= versatile_restart,
-MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index 7de3e92a13b0..c44871851255 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -22,15 +22,389 @@
  */
 
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/platform_data/video-clcd-versatile.h>
+#include <linux/amba/mmci.h>
+#include <linux/mtd/physmap.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 
-#include "core.h"
+/* macro to get at MMIO space when running virtually */
+#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+#define __io_address(n)		((void __iomem __force *)IO_ADDRESS(n))
+
+/*
+ * Memory definitions
+ */
+#define VERSATILE_FLASH_BASE           0x34000000
+#define VERSATILE_FLASH_SIZE           SZ_64M
+
+/*
+ * ------------------------------------------------------------------------
+ *  Versatile Registers
+ * ------------------------------------------------------------------------
+ */
+#define VERSATILE_SYS_LOCK_OFFSET             0x20
+#define VERSATILE_SYS_RESETCTL_OFFSET         0x40
+#define VERSATILE_SYS_PCICTL_OFFSET           0x44
+#define VERSATILE_SYS_MCI_OFFSET              0x48
+#define VERSATILE_SYS_FLASH_OFFSET            0x4C
+#define VERSATILE_SYS_CLCD_OFFSET             0x50
+
+/*
+ * VERSATILE_SYS_FLASH
+ */
+#define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
+
+/*
+ * VERSATILE peripheral addresses
+ */
+#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
+#define VERSATILE_MMCI1_BASE           0x1000B000	/* MMC Interface */
+#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
+#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
+#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
+#define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
+
+/*
+ * System controller bit assignment
+ */
+#define VERSATILE_REFCLK	0
+#define VERSATILE_TIMCLK	1
+
+#define VERSATILE_TIMER1_EnSel	15
+#define VERSATILE_TIMER2_EnSel	17
+#define VERSATILE_TIMER3_EnSel	19
+#define VERSATILE_TIMER4_EnSel	21
+
+static void __iomem *versatile_sys_base;
+static void __iomem *versatile_ib2_ctrl;
+
+static void versatile_flash_set_vpp(struct platform_device *pdev, int on)
+{
+	u32 val;
+
+	val = readl(versatile_sys_base + VERSATILE_SYS_FLASH_OFFSET);
+	if (on)
+		val |= VERSATILE_FLASHPROG_FLVPPEN;
+	else
+		val &= ~VERSATILE_FLASHPROG_FLVPPEN;
+	writel(val, versatile_sys_base + VERSATILE_SYS_FLASH_OFFSET);
+}
+
+static struct physmap_flash_data versatile_flash_data = {
+	.width			= 4,
+	.set_vpp		= versatile_flash_set_vpp,
+};
+
+static struct resource versatile_flash_resource = {
+	.start			= VERSATILE_FLASH_BASE,
+	.end			= VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
+	.flags			= IORESOURCE_MEM,
+};
+
+struct platform_device versatile_flash_device = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= &versatile_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &versatile_flash_resource,
+};
+
+unsigned int mmc_status(struct device *dev)
+{
+	struct amba_device *adev = container_of(dev, struct amba_device, dev);
+	u32 mask;
+
+	if (adev->res.start == VERSATILE_MMCI0_BASE)
+		mask = 1;
+	else
+		mask = 2;
+
+	return readl(versatile_sys_base + VERSATILE_SYS_MCI_OFFSET) & mask;
+}
+
+static struct mmci_platform_data mmc0_plat_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
+};
+
+static struct mmci_platform_data mmc1_plat_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
+};
+
+/*
+ * CLCD support.
+ */
+#define SYS_CLCD_MODE_MASK	(3 << 0)
+#define SYS_CLCD_MODE_888	(0 << 0)
+#define SYS_CLCD_MODE_5551	(1 << 0)
+#define SYS_CLCD_MODE_565_RLSB	(2 << 0)
+#define SYS_CLCD_MODE_565_BLSB	(3 << 0)
+#define SYS_CLCD_NLCDIOON	(1 << 2)
+#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
+#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
+#define SYS_CLCD_ID_MASK	(0x1f << 8)
+#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
+#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
+#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
+#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
+#define SYS_CLCD_ID_VGA		(0x1f << 8)
+
+static bool is_sanyo_2_5_lcd;
+
+/*
+ * Disable all display connectors on the interface module.
+ */
+static void versatile_clcd_disable(struct clcd_fb *fb)
+{
+	void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
+	u32 val;
+
+	val = readl(sys_clcd);
+	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
+	writel(val, sys_clcd);
+
+	/*
+	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
+	 */
+	if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
+		unsigned long ctrl;
+
+		ctrl = readl(versatile_ib2_ctrl);
+		ctrl &= ~0x01;
+		writel(ctrl, versatile_ib2_ctrl);
+	}
+}
+
+/*
+ * Enable the relevant connector on the interface module.
+ */
+static void versatile_clcd_enable(struct clcd_fb *fb)
+{
+	struct fb_var_screeninfo *var = &fb->fb.var;
+	void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
+	u32 val;
+
+	val = readl(sys_clcd);
+	val &= ~SYS_CLCD_MODE_MASK;
+
+	switch (var->green.length) {
+	case 5:
+		val |= SYS_CLCD_MODE_5551;
+		break;
+	case 6:
+		if (var->red.offset == 0)
+			val |= SYS_CLCD_MODE_565_RLSB;
+		else
+			val |= SYS_CLCD_MODE_565_BLSB;
+		break;
+	case 8:
+		val |= SYS_CLCD_MODE_888;
+		break;
+	}
+
+	/*
+	 * Set the MUX
+	 */
+	writel(val, sys_clcd);
+
+	/*
+	 * And now enable the PSUs
+	 */
+	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
+	writel(val, sys_clcd);
+
+	/*
+	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
+	 */
+	if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
+		unsigned long ctrl;
+
+		ctrl = readl(versatile_ib2_ctrl);
+		ctrl |= 0x01;
+		writel(ctrl, versatile_ib2_ctrl);
+	}
+}
+
+/*
+ * Detect which LCD panel is connected, and return the appropriate
+ * clcd_panel structure.  Note: we do not have any information on
+ * the required timings for the 8.4in panel, so we presently assume
+ * VGA timings.
+ */
+static int versatile_clcd_setup(struct clcd_fb *fb)
+{
+	void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
+	const char *panel_name;
+	u32 val;
+
+	is_sanyo_2_5_lcd = false;
+
+	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
+	if (val == SYS_CLCD_ID_SANYO_3_8)
+		panel_name = "Sanyo TM38QV67A02A";
+	else if (val == SYS_CLCD_ID_SANYO_2_5) {
+		panel_name = "Sanyo QVGA Portrait";
+		is_sanyo_2_5_lcd = true;
+	} else if (val == SYS_CLCD_ID_EPSON_2_2)
+		panel_name = "Epson L2F50113T00";
+	else if (val == SYS_CLCD_ID_VGA)
+		panel_name = "VGA";
+	else {
+		printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
+			val);
+		panel_name = "VGA";
+	}
+
+	fb->panel = versatile_clcd_get_panel(panel_name);
+	if (!fb->panel)
+		return -EINVAL;
+
+	return versatile_clcd_setup_dma(fb, SZ_1M);
+}
+
+static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
+{
+	clcdfb_decode(fb, regs);
+
+	/* Always clear BGR for RGB565: we do the routing externally */
+	if (fb->fb.var.green.length == 6)
+		regs->cntl &= ~CNTL_BGR;
+}
+
+static struct clcd_board clcd_plat_data = {
+	.name		= "Versatile",
+	.caps		= CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
+	.check		= clcdfb_check,
+	.decode		= versatile_clcd_decode,
+	.disable	= versatile_clcd_disable,
+	.enable		= versatile_clcd_enable,
+	.setup		= versatile_clcd_setup,
+	.mmap		= versatile_clcd_mmap_dma,
+	.remove		= versatile_clcd_remove_dma,
+};
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate().  Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data),
+	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", &mmc1_plat_data),
+	OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
+	{}
+};
+
+static struct map_desc versatile_io_desc[] __initdata __maybe_unused = {
+	{
+		.virtual	=  IO_ADDRESS(VERSATILE_SCTL_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_SCTL_BASE),
+		.length		= SZ_4K * 9,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init versatile_map_io(void)
+{
+	debug_ll_io_init();
+	iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
+}
+
+static void __init versatile_init_early(void)
+{
+	u32 val;
+
+	/*
+	 * set clock frequency:
+	 *	VERSATILE_REFCLK is 32KHz
+	 *	VERSATILE_TIMCLK is 1MHz
+	 */
+	val = readl(__io_address(VERSATILE_SCTL_BASE));
+	writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
+	       __io_address(VERSATILE_SCTL_BASE));
+}
+
+static void versatile_restart(enum reboot_mode mode, const char *cmd)
+{
+	u32 val;
+
+	val = readl(versatile_sys_base + VERSATILE_SYS_RESETCTL_OFFSET);
+	val |= 0x105;
+
+	writel(0xa05f, versatile_sys_base + VERSATILE_SYS_LOCK_OFFSET);
+	writel(val, versatile_sys_base + VERSATILE_SYS_RESETCTL_OFFSET);
+	writel(0, versatile_sys_base + VERSATILE_SYS_LOCK_OFFSET);
+}
+
+static void __init versatile_dt_pci_init(void)
+{
+	u32 val;
+	struct device_node *np;
+	struct property *newprop;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,versatile-pci");
+	if (!np)
+		return;
+
+	/* Check if PCI backplane is detected */
+	val = readl(versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET);
+	if (val & 1) {
+		/*
+		 * Enable PCI accesses. Note that the documentaton is
+		 * inconsistent whether or not this is needed, but the old
+		 * driver had it so we will keep it.
+		 */
+		writel(1, versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET);
+		return;
+	}
+
+	newprop = kzalloc(sizeof(*newprop), GFP_KERNEL);
+	if (!newprop)
+		return;
+
+	newprop->name = kstrdup("status", GFP_KERNEL);
+	newprop->value = kstrdup("disabled", GFP_KERNEL);
+	newprop->length = sizeof("disabled");
+	of_update_property(np, newprop);
+
+	pr_info("Not plugged into PCI backplane!\n");
+}
 
 static void __init versatile_dt_init(void)
 {
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,core-module-versatile");
+	if (np)
+		versatile_sys_base = of_iomap(np, 0);
+	WARN_ON(!versatile_sys_base);
+
+	versatile_ib2_ctrl = ioremap(VERSATILE_IB2_CTL_BASE, SZ_4K);
+
+	versatile_dt_pci_init();
+
+	platform_device_register(&versatile_flash_device);
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     versatile_auxdata_lookup, NULL);
 }
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
deleted file mode 100644
index 9a53d0bd9144..000000000000
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/versatile_pb.c
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include "core.h"
-
-#if 1
-#define IRQ_MMCI1A	IRQ_VICSOURCE23
-#else
-#define IRQ_MMCI1A	IRQ_SIC_MMCI1A
-#endif
-
-static struct mmci_platform_data mmc1_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
-};
-
-#define UART3_IRQ	{ IRQ_SIC_UART3 }
-#define SCI1_IRQ	{ IRQ_SIC_SCI3 }
-#define MMCI1_IRQ	{ IRQ_MMCI1A, IRQ_SIC_MMCI1B }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-
-/* FPGA Primecells */
-APB_DEVICE(uart3, "fpga:09", UART3,    NULL);
-APB_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
-APB_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
-
-
-static struct amba_device *amba_devs[] __initdata = {
-	&uart3_device,
-	&sci1_device,
-	&mmc1_device,
-};
-
-static void __init versatile_pb_init(void)
-{
-	int i;
-
-	versatile_init();
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.map_io		= versatile_map_io,
-	.init_early	= versatile_init_early,
-	.init_irq	= versatile_init_irq,
-	.init_time	= versatile_timer_init,
-	.init_machine	= versatile_pb_init,
-	.restart	= versatile_restart,
-MACHINE_END