Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "Included in this update:

   - perf updates from Will Deacon:

     The main changes are callchain stability fixes from Jean Pihet and
     event mapping and PMU name rework from Mark Rutland

     The latter is preparatory work for enabling some code re-use with
     arm64 in the future.

   - updates for nommu from Uwe Kleine-König:

     Two different fixes for the same problem making some ARM nommu
     configurations not boot since 3.6-rc1.  The problem is that
     user_addr_max returned the biggest available RAM address which
     makes some copy_from_user variants fail to read from XIP memory.

   - deprecate legacy OMAP DMA API, in preparation for it's removal.

     The popular drivers have been converted over, leaving a very small
     number of rarely used drivers, which hopefully can be converted
     during the next cycle with a bit more visibility (and hopefully
     people popping out of the woodwork to help test)

   - more tweaks for BE systems, particularly with the kernel image
     format.  In connection with this, I've cleaned up the way we
     generate the linker script for the decompressor.

   - removal of hard-coded assumptions of the kernel stack size, making
     everywhere depend on the value of THREAD_SIZE_ORDER.

   - MCPM updates from Nicolas Pitre.

   - Make it easier for proper CPU part number checks (which should
     always include the vendor field).

   - Assembly code optimisation - use the "bx" instruction when
     returning from a function on ARMv6+ rather than "mov pc, reg".

   - Save the last kernel misaligned fault location and report it via
     the procfs alignment file.

   - Clean up the way we create the initial stack frame, which is a
     repeated pattern in several different locations.

   - Support for 8-byte get_user(), needed for some DRM implementations.

   - mcs locking from Will Deacon.

   - Save and restore a few more Cortex-A9 registers (for errata
     workarounds)

   - Fix various aspects of the SWP emulation, and the ELF hwcap for the
     SWP instruction.

   - Update LPAE logic for pte_write and pmd_write to make it more
     correct.

   - Support for Broadcom Brahma15 CPU cores.

   - ARM assembly crypto updates from Ard Biesheuvel"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (53 commits)
  ARM: add comments to the early page table remap code
  ARM: 8122/1: smp_scu: enable SCU standby support
  ARM: 8121/1: smp_scu: use macro for SCU enable bit
  ARM: 8120/1: crypto: sha512: add ARM NEON implementation
  ARM: 8119/1: crypto: sha1: add ARM NEON implementation
  ARM: 8118/1: crypto: sha1/make use of common SHA-1 structures
  ARM: 8113/1: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
  ARM: 8111/1: Enable erratum 798181 for Broadcom Brahma-B15
  ARM: 8110/1: do CPU-specific init for Broadcom Brahma15 cores
  ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE
  ARM: 8108/1: mm: Introduce {pte,pmd}_isset and {pte,pmd}_isclear
  ARM: hwcap: disable HWCAP_SWP if the CPU advertises it has exclusives
  ARM: SWP emulation: only initialise on ARMv7 CPUs
  ARM: SWP emulation: always enable when SMP is enabled
  ARM: 8103/1: save/restore Cortex-A9 CP15 registers on suspend/resume
  ARM: 8098/1: mcs lock: implement wfe-based polling for MCS locking
  ARM: 8091/2: add get_user() support for 8 byte types
  ARM: 8097/1: unistd.h: relocate comments back to place
  ARM: 8096/1: Describe required sort order for textofs-y (TEXT_OFFSET)
  ARM: 8090/1: add revision info for PL310 errata 588369 and 727915
  ...

1 files changed, 17 insertions, 17 deletions

diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index ba0d58e1a2a2..c32d073282ea 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -86,7 +86,7 @@
  * cpu_arm925_proc_init()
  */
 ENTRY(cpu_arm925_proc_init)
-	mov	pc, lr
+	ret	lr
 
 /*
  * cpu_arm925_proc_fin()
@@ -96,7 +96,7 @@ ENTRY(cpu_arm925_proc_fin)
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
+	ret	lr
 
 /*
  * cpu_arm925_reset(loc)
@@ -129,7 +129,7 @@ ENDPROC(cpu_arm925_reset)
 	bic	ip, ip, #0x000f			@ ............wcam
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
+	ret	r0
 
 /*
  * cpu_arm925_do_idle()
@@ -145,7 +145,7 @@ ENTRY(cpu_arm925_do_idle)
 	mcr	p15, 0, r2, c1, c0, 0		@ Disable I cache
 	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
 	mcr	p15, 0, r1, c1, c0, 0		@ Restore ICache enable
-	mov	pc, lr
+	ret	lr
 
 /*
  *	flush_icache_all()
@@ -155,7 +155,7 @@ ENTRY(cpu_arm925_do_idle)
 ENTRY(arm925_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
+	ret	lr
 ENDPROC(arm925_flush_icache_all)
 
 /*
@@ -188,7 +188,7 @@ __flush_whole_cache:
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
+	ret	lr
 
 /*
  *	flush_user_cache_range(start, end, flags)
@@ -225,7 +225,7 @@ ENTRY(arm925_flush_user_cache_range)
 	blo	1b
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
+	ret	lr
 
 /*
  *	coherent_kern_range(start, end)
@@ -259,7 +259,7 @@ ENTRY(arm925_coherent_user_range)
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	r0, #0
-	mov	pc, lr
+	ret	lr
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -279,7 +279,7 @@ ENTRY(arm925_flush_kern_dcache_area)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
+	ret	lr
 
 /*
  *	dma_inv_range(start, end)
@@ -307,7 +307,7 @@ arm925_dma_inv_range:
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
+	ret	lr
 
 /*
  *	dma_clean_range(start, end)
@@ -328,7 +328,7 @@ arm925_dma_clean_range:
 	blo	1b
 #endif
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
+	ret	lr
 
 /*
  *	dma_flush_range(start, end)
@@ -350,7 +350,7 @@ ENTRY(arm925_dma_flush_range)
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
+	ret	lr
 
 /*
  *	dma_map_area(start, size, dir)
@@ -373,7 +373,7 @@ ENDPROC(arm925_dma_map_area)
  *	- dir	- DMA direction
  */
 ENTRY(arm925_dma_unmap_area)
-	mov	pc, lr
+	ret	lr
 ENDPROC(arm925_dma_unmap_area)
 
 	.globl	arm925_flush_kern_cache_louis
@@ -390,7 +390,7 @@ ENTRY(cpu_arm925_dcache_clean_area)
 	bhi	1b
 #endif
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
+	ret	lr
 
 /* =============================== PageTable ============================== */
 
@@ -419,7 +419,7 @@ ENTRY(cpu_arm925_switch_mm)
 	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
 #endif
-	mov	pc, lr
+	ret	lr
 
 /*
  * cpu_arm925_set_pte_ext(ptep, pte, ext)
@@ -436,7 +436,7 @@ ENTRY(cpu_arm925_set_pte_ext)
 #endif
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 #endif /* CONFIG_MMU */
-	mov	pc, lr
+	ret	lr
 
 	.type	__arm925_setup, #function
 __arm925_setup:
@@ -469,7 +469,7 @@ __arm925_setup:
 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
 	orr	r0, r0, #0x4000			@ .1.. .... .... ....
 #endif
-	mov	pc, lr
+	ret	lr
 	.size	__arm925_setup, . - __arm925_setup
 
 	/*